Algorithm-Based Linearly Graded Compositions of GeSn on GaAs (001) via Molecular Beam Epitaxy.

The growth of high-composition GeSn films in the future will likely be guided by algorithms. In this study, we show how a logarithmic-based algorithm can be used to obtain high-quality GeSn compositions up to 16% on GaAs (001) substrates via molecular beam epitaxy. Herein, we use composition targeting and logarithmic Sn cell temperature control to achieve linearly graded pseudomorph Ge1-xSnx compositions up to 10% before partial relaxation of the structure and a continued gradient up to 16% GeSn. In this report, we use X-ray diffraction, simulation, secondary ion mass spectrometry, and atomic force microscopy to analyze and demonstrate some of the possible growths that can be produced with the enclosed algorithm. This methodology of growth is a major step forward in the field of GeSn development and the first ever demonstration of algorithmically driven, linearly graded GeSn films.

The growth of Ge and direct bandgap Ge1-xSnx on GaAs (001) by molecular beam epitaxy.

Germanium tin (GeSn) is a tuneable narrow bandgap material, which has shown remarkable promise for the industry of near- and mid-infrared technologies for high efficiency photodetectors and laser devices. Its synthesis is challenged by the lattice mismatch between the GeSn alloy and the substrate on which it is grown, sensitively affecting its crystalline and optical qualities. In this article, we investigate the growth of Ge and GeSn on GaAs (001) substrates using two different buffer layers consisting of Ge/GaAs and Ge/AlAs via molecular beam epitaxy. The quality of the Ge layers was compared using X-ray diffraction, atomic force microscopy, reflection high-energy electron diffraction, and photoluminescence. The characterization techniques demonstrate high-quality Ge layers, including atomic steps, when grown on either GaAs or AlAs at a growth temperature between 500-600 °C. The photoluminescence from the Ge layers was similar in relative intensity and linewidth to that of bulk Ge. The Ge growth was followed by the growth of GeSn using a Sn composition gradient and substrate gradient approach to achieve GeSn films with 9 to 10% Sn composition. Characterization of the GeSn films also indicates high-quality gradients based on X-ray diffraction, photoluminescence, and energy-dispersive X-ray spectroscopy measurements. Finally, we were able to demonstrate temperature-dependent PL results showing that for the growth on Ge/GaAs buffer, the direct transition has shifted past the indirect transition to a longer wavelength/lower energy suggesting a direct bandgap GeSn material.

Study of all-group-IV SiGeSn mid-IR lasers with dual wavelength emission.

Direct band gap GeSn alloys have recently emerged as promising lasing source materials for monolithic integration on Si substrate. In this work, optically pumped mid-infrared GeSn lasers were studied with the observation of dual-wavelength lasing at 2187 nm and 2460 nm. Two simultaneous lasing regions include a GeSn buffer layer (bulk) and a SiGeSn/GeSn multiple quantum well structure that were grown seamlessly using a chemical vapor deposition reactor. The onset of dual lasing occurs at 420 kW/cm2. The wider bandgap SiGeSn partitioning barrier enables the independent operation of two gain regions. While the better performance device in terms of lower threshold may be obtained by using two MQW regions design, the preliminary results and discussions in this work paves a way towards all-group-IV dual wavelength lasers monolithically integrated on Si substrate.

"GeSn Rule-23"-The Performance Limit of GeSn Infrared Photodiodes.

Group-IV GeSn photodetectors (PDs) compatible with standard complementary metal-oxide-semiconductor (CMOS) processing have emerged as a new and non-toxic infrared detection technology to enable a wide range of infrared applications. The performance of GeSn PDs is highly dependent on the Sn composition and operation temperature. Here, we develop theoretical models to establish a simple rule of thumb, namely "GeSn-rule 23", to describe GeSn PDs' dark current density in terms of operation temperature, cutoff wavelength, and Sn composition. In addition, analysis of GeSn PDs' performance shows that the responsivity, detectivity, and bandwidth are highly dependent on operation temperature. This rule provides a simple and convenient indicator for device developers to estimate the device performance at various conditions for practical applications.

Investigation of the cap layer for improved GeSn multiple quantum well laser performance.

The study of all-group-IV SiGeSn lasers has opened a new avenue to Si-based light sources. SiGeSn heterostructure and quantum well lasers have been successfully demonstrated in the past few years. It has been reported that, for multiple quantum well lasers, the optical confinement factor plays an important role in the net modal gain. In previous studies, adding a cap layer was proposed to increase the optical mode overlap with the active region and thereby improve the optical confinement factor of Fabry-Perot cavity lasers. In this work, SiGeSn/GeSn multiple quantum well (4-well) devices with various cap layer thicknesses, i.e., 0 (no cap), 190, 250, and 290 nm, are grown using a chemical vapor deposition reactor and characterized via optical pumping. While no-cap and thinner-cap devices only show spontaneous emission, the two thicker-cap devices exhibit lasing up to 77 K, with an emission peak at 2440 nm and a threshold of 214 kW/cm2 (250 nm cap device). The clear trend in device performance disclosed in this work provides guidance in device design for electrically injected SiGeSn quantum well lasers.

Development of LTCC-packaged optocouplers as optical galvanic isolation for high-temperature applications.

This paper reports high-temperature optocouplers for signal galvanic isolation. Low temperature co-fired ceramic (LTCC) technology was used in the design and fabrication of the high-temperature optocoupler package. The optimal coupling behaviors, driving capabilities and response speed of the optocouplers were concentrated and investigated in this paper. Emitters and detectors with different emission and spectral wavelengths were studied to achieve optimal coupling behaviors. Relatively high coupling efficiency is achieved with emitters and detectors of emission and spectral wavelength in the red spectrum (i.e., 620-750 nm), leading to higher current transfer ratios (CTR). To further enhance the electrical performance, optocouplers with multiple detectors in parallel were designed and fabricated. CTR, leakage current and response speed (i.e., propagation delay, rise time and fall time) of the optocouplers were characterized over a range of temperatures from 25 to 250 °C. The CTR degrades at high temperatures, while the leakage current and response speed show little degradation with varying temperatures. Furthermore, the behaviors of the optocouplers with varying temperatures are modeled and analyzed.

3D Nanoscale Mapping of Short-Range Order in GeSn Alloys.

GeSn on Si has attracted much research interest due to its tunable direct bandgap for mid-infrared applications. Recently, short-range order (SRO) in GeSn alloys has been theoretically predicted, which profoundly impacts the band structure. However, characterizing SRO in GeSn is challenging. Guided by physics-informed Poisson statistical analyses of k-nearest neighbors (KNN) in atom probe tomography (APT), a new approach is demonstrated here for 3D nanoscale SRO mapping and semi-quantitative strain mapping in GeSn. For GeSn with ≈14 at. % Sn, the SRO parameters of Sn-Sn 1NN in 10 × 10 × 10 nm3 nanocubes can deviate from that of the random alloys by ±15 %. The relatively large fluctuation of the SRO parameters contributes to band-edge softening observed optically. Sn-Sn 1NN also tends to be more favored toward the surface, less favored under strain relaxation or tensile strain, while almost independent of local Sn composition. An algorithm based on least square fit of atomic positions further verifies this Poisson-KNN statistical method. Compared to existing macroscopic spectroscopy or electron microscopy techniques, this new APT statistical analysis uniquely offers 3D SRO mapping at nanoscale resolution in a relatively large volume with millions of atoms. It can also be extended to investigate SRO in other alloy systems.

High-temperature analysis of optical coupling using AlGaAs/GaAs LEDs for high-density integrated power modules.

A low-temperature co-fired ceramic (LTCC)-based optocoupler design is demonstrated as a possible solution for optical isolation in high-density integrated power modules. The design and fabrication of LTCC based package are discussed. Commercially available aluminum gallium arsenide/gallium arsenide (AlGaAs/GaAs) double heterostructure is used both as emitter and photodetector in the proposed optocoupler. A detailed study on the electroluminescence and spectral response of the AlGaAs/GaAs structure is conducted at elevated temperatures. The material figure of merit parameter, D*, is calculated in the temperature range 77-800 K. The fabricated optocoupler is tested at elevated temperatures, and the results are presented.

Design and optimization of high temperature optocouplers as galvanic isolation.

The commercial InGaN-based (blue and green) and AlGaInP-based (red) multiple quantum well (MQW) lighting emitting diodes (LEDs) were studied in a wide range of temperatures up to 800 K for their light emission and detection (i.e., LEDs operated under reverse bias as photodiodes (PDs)) characteristics. The results indicate the feasibility of integrating a pair of selected LEDs to fabricate high temperature (HT) optocouplers, which can be utilized as galvanic isolation to replace the bulky isolation transforms in the high-density power modules. A detailed study on LEDs and PDs were performed. The external quantum efficiency (EQE) of the LED and PDs were calculated. Higher relative external quantum efficiency (EQE) and lower efficiency droops with temperatures are obtained from the blue and green LEDs for display compared with the blue one for lighting and red LED for display. The blue for lighting and red for display devices show superior responsivity, specific detectivity (D*), and EQE compared with blue and green for display when operated as PDs. The results suggest that red LED devices for display can be used to optimize HT optocouplers due to the highest wavelength overlapping compared with others.

Growth of Pseudomorphic GeSn at Low Pressure with Sn Composition of 16.7.

Group-IV alloy GeSn holds great promise for the high-performance optoelectronic devices that can be monolithically integrated on Si for near- and mid-infrared applications. Growth of GeSn using chemical vapor deposition technique with various Sn and Ge precursors has been investigated worldwide. To achieve relatively high Sn incorporation, the use of higher pressure and/or higher order Ge hydrides precursors were reported. In this work, we successfully demonstrated the growth of high-quality GeSn with Sn composition of 16.7% at low pressure of 12 Torr. The alloy was grown using the commercially available GeH4 and SnCl4 precursors via a chemical vapor deposition reactor. Material and optical characterizations were performed to confirm the Sn incorporation and to study the optical properties. The demonstrated growth results reveal a low-pressure growth window to achieve high-quality and high Sn alloys for future device applications.

Investigation of SiGeSn/GeSn/SiGeSn single quantum well with enhanced well emission.

In this work, a SiGeSn/GeSn/SiGeSn single quantum well was grown and characterized. The sample has a thicker GeSn well of 22nm compared to a previously reported 9nm well configuration. The thicker well leads to: (i) lowered ground energy level in Γ valley offering more bandgap directness; (ii) increased carrier density in the well; and (iii) improved carrier collection due to increased barrier height. As a result, significantly enhanced emission from the quantum well was observed. The strong photoluminescence (PL) signal allows for the estimation of quantum efficiency (QE), which was unattainable in previous studies. Using pumping-power-dependent PL spectra at 20K, the peak spontaneous QE and external QE were measured as 37.9% and 1.45%, respectively.

Impact of nonlinear effects in Si towards integrated microwave-photonic applications.

As one of major integrated microwave photonics (IMWP) platforms, Si photonics exhibits the intensity-dependent Kerr effect and two-photon absorption (TPA) with associated free carrier effects (FCE). At the commonly used 1.55 µm, TPA losses and the associated FCE would eventually limit the dynamic range of Si photonic links. Resonating structures such as ring resonators (RRs) experience enhanced nonlinear effects due to significant intensity buildup. According to the bandgap characteristics of Si, TPA can be eliminated at and beyond 2.2 µm. In this work, a systemic simulation of straight waveguides and RRs is performed at wavelengths from 1.55 to 2.2 µm where the wavelength-dependent TPA loss is investigated. Moreover, the Kerr effect leads to unwanted change of refractive index, which shifts the RR resonant wavelength at both 1.55 and 2.2 µm, thus needing shift compensation. Compensated RRs operating at 2.2 µm could open a new venue for Si photonics towards IMWP applications.

High Temperature and Power Dependent Photoluminescence Analysis on Commercial Lighting and Display LED Materials for Future Power Electronic Modules.

Commercial light emitting diode (LED) materials - blue (i.e., InGaN/GaN multiple quantum wells (MQWs) for display and lighting), green (i.e., InGaN/GaN MQWs for display), and red (i.e., Al0.05Ga0.45In0.5P/Al0.4Ga0.1In0.5P for display) are evaluated in range of temperature (77-800) K for future applications in high density power electronic modules. The spontaneous emission quantum efficiency (QE) of blue, green, and red LED materials with different wavelengths was calculated using photoluminescence (PL) spectroscopy. The spontaneous emission QE was obtained based on a known model so-called the ABC model. This model has been recently used extensively to calculate the internal quantum efficiency and its droop in the III-nitride LED. At 800 K, the spontaneous emission quantum efficiencies are around 40% for blue for lighting and blue for display LED materials, and it is about 44.5% for green for display LED materials. The spontaneous emission QE is approximately 30% for red for display LED material at 800 K. The advance reported in this paper evidences the possibility of improving high temperature optocouplers with an operating temperature of 500 K and above.

Ge1-xSnx alloys: Consequences of band mixing effects for the evolution of the band gap Γ-character with Sn concentration.

In this work we study the nature of the band gap in GeSn alloys for use in silicon-based lasers. Special attention is paid to Sn-induced band mixing effects. We demonstrate from both experiment and ab-initio theory that the (direct) Γ-character of the GeSn band gap changes continuously with alloy composition and has significant Γ-character even at low (6%) Sn concentrations. The evolution of the Γ-character is due to Sn-induced conduction band mixing effects, in contrast to the sharp indirect-to-direct band gap transition obtained in conventional alloys such as Al1-xGaxAs. Understanding the band mixing effects is critical not only from a fundamental and basic properties viewpoint but also for designing photonic devices with enhanced capabilities utilizing GeSn and related material systems.

Optically pumped lasing at 3 µm from compositionally graded GeSn with tin up to 22.3.

The recent demonstration of the GeSn laser opened a promising route towards the monolithic integration of light sources on the Si platform. A GeSn laser with higher Sn content is highly desirable to enhance the emission efficiency and to cover longer wavelength. This Letter reports optically pumped edge-emitting GeSn lasers operating at 3 µm, whose device structure featured Sn compositionally graded with a maximum Sn content of 22.3%. By using a 1950-nm laser pumping in comparison with a 1064-nm pumping, the local heating and quantum defect were effectively reduced, which improved laser performance in terms of higher maximum lasing temperature and lower threshold.

Study of direct bandgap type-I GeSn/GeSn double quantum well with improved carrier confinement.

The GeSn-based quantum wells (QWs) have been investigated recently for the development of efficient GeSn emitters. Although our previous study indicated that the direct bandgap well with type-I band alignment was achieved, the demonstrated QW still has insufficient carrier confinement. In this work, we report the systematic study of light emission from the Ge0.91Sn0.09/Ge0.85Sn0.15/Ge0.91Sn0.09 double QW structure. Two double QW samples, with the thicknesses of Ge0.85Sn0.15 well of 6 and 19 nm, were investigated. Band structure calculations revealed that both samples feature type-I band alignment. Compared with our previous study, by increasing the Sn composition in GeSn barrier and well, the QW layer featured increased energy separation between the indirect and direct bandgaps towards a better direct gap semiconductor. Moreover, the thicker well sample exhibited improved carrier confinement compared to the thinner well sample due to lowered first quantized energy level in the Γ valley. To identify the optical transition characteristics, photoluminescence (PL) study using three pump lasers with different penetration depths and photon energies was performed. The PL spectra confirmed the direct bandgap well feature and the improved carrier confinement, as significantly enhanced QW emission from the thicker well sample was observed.

Endothelial cell CD36 optimizes tissue fatty acid uptake.

Movement of circulating fatty acids (FAs) to parenchymal cells requires their transfer across the endothelial cell (EC) barrier. The multiligand receptor cluster of differentiation 36 (CD36) facilitates tissue FA uptake and is expressed in ECs and parenchymal cells such as myocytes and adipocytes. Whether tissue uptake of FAs is dependent on EC or parenchymal cell CD36, or both, is unknown. Using a cell-specific deletion approach, we show that EC, but not parenchymal cell, CD36 deletion increased fasting plasma FAs and postprandial triglycerides. EC-Cd36-KO mice had reduced uptake of radiolabeled long-chain FAs into heart, skeletal muscle, and brown adipose tissue; these uptake studies were replicated using [11C]palmitate PET scans. High-fat diet-fed EC-CD36-deficient mice had improved glucose tolerance and insulin sensitivity. Both EC and cardiomyocyte (CM) deletion of CD36 reduced heart lipid droplet accumulation after fasting, but CM deletion did not affect heart glucose or FA uptake. Expression in the heart of several genes modulating glucose metabolism and insulin action increased with EC-CD36 deletion but decreased with CM deletion. In conclusion, EC CD36 acts as a gatekeeper for parenchymal cell FA uptake, with important downstream effects on glucose utilization and insulin action.

Investigation of GeSn Strain Relaxation and Spontaneous Composition Gradient for Low-Defect and High-Sn Alloy Growth.

Recent development of group-IV alloy GeSn indicates its bright future for the application of mid-infrared Si photonics. Relaxed GeSn with high material quality and high Sn composition is highly desirable to cover mid-infrared wavelength. However, its crystal growth remains a great challenge. In this work, a systematic study of GeSn strain relaxation mechanism and its effects on Sn incorporation during the material growth via chemical vapor deposition was conducted. It was discovered that Sn incorporation into Ge lattice sites is limited by high compressive strain rather than historically acknowledged chemical reaction dynamics, which was also confirmed by Gibbs free energy calculation. In-depth material characterizations revealed that: (i) the generation of dislocations at Ge/GeSn interface eases the compressive strain, which offers a favorably increased Sn incorporation; (ii) the formation of dislocation loop near Ge/GeSn interface effectively localizes defects, leading to the subsequent low-defect grown GeSn. Following the discovered growth mechanism, a world-record Sn content of 22.3% was achieved. The experiment result shows that even higher Sn content could be obtained if further continuous growth with the same recipe is conducted. This report offers an essential guidance for the growth of high quality high Sn composition GeSn for future GeSn based optoelectronics.

Non-avalanche single photon detection without carrier transit-time delay through quantum capacitive coupling.

Searching for innovative approaches to detect single photons remains at the center of science and technology for decades. This paper proposes a zero transit-time, non-avalanche quantum capacitive photodetector to register single photons. In this detector, the absorption of a single photon changes the wave function of a single electron trapped in a quantum dot (QD), leading to a charge density redistribution nearby. This redistribution translates into a voltage signal through capacitive coupling between the QD and the measurement probe. Using InAs QD/AlAs barrier as a model system, the simulation shows that the output signal reaches ~4 mV per absorbed photon, promising for high-sensitivity, ps single-photon detection.

Toward Single Atom Chains with Exfoliated Tellurium.

We demonstrate that the atom chain structure of Te allows it to be exfoliated as ultra-thin flakes and nanowires. Atomic force microscopy of exfoliated Te shows that thicknesses of 1-2 nm and widths below 100 nm can be exfoliated with this method. The Raman modes of exfoliated Te match those of bulk Te, with a slight shift (4 cm-1) due to a hardening of the A1 and E modes. Polarized Raman spectroscopy is used to determine the crystal orientation of exfoliated Te flakes. These experiments establish exfoliation as a route to achieve nanoscale trigonal Te while also demonstrating the potential for fabrication of single atom chains of Te.