Recent Progress on In Situ Catalytic Conversion Catalysts for Oil Shale.

With the gradual depletion of oil resources, it is urgent to vigorously develop unconventional and renewable energy sources. As an unconventional resource with abundant resources, the rational and efficient development of oil shale is of great significance to alleviating the national energy crisis. The main methods of oil shale development are surface dry distillation and in situ transformation. In situ catalytic conversion technology, as an emerging mining method, has the potential to improve efficiency, reduce costs, and environmental impact and is an important direction for future oil shale development. As a key component in the in situ conversion process, catalysts play a crucial role in the rate, selectivity, and product quality of the reaction. However, the research on oil shale pyrolysis catalysts is still in the laboratory stage and is difficult to translate into practical applications. Therefore, this paper reviews recent progress of catalyst research in the in situ catalytic conversion of oil shale, including the types, design principles, and reaction mechanisms of catalysts, and looks forward to the future development direction. It provides a certain reference for the discovery of new catalysts that can improve yield and reduce environmental pollution in the process of oil shale extraction and also provides a valuable technical reference for the green development and utilization of unconventional and strategic alternative energy sources in the world and the transformation and sustainable development of the global energy structure.

Recent progress on CO2 separation membranes.

Presently, excessive carbon dioxide emissions represent a critical environmental challenge. Thus, urgent efforts are required to develop environmentally friendly and low-energy technologies for carbon dioxide treatment. In this case, membrane separation technology stands out as a promising avenue for CO2 separation, with selective membrane materials of high permeability playing a pivotal role in this process. Herein, we categorize CO2 separation membranes into three groups: inorganic membranes, organic membranes, and emerging membranes. Moreover, representative high-performance membranes are introduced and their synthesis methods, gas separation performances, and applications are examined. Furthermore, a brief analysis of the challenges encountered by carbon dioxide separation membrane materials is provided together with a discussion on the future research direction. It is expected that this review will provide some potential insights and guidance for the future development of CO2 separation membranes, which can promote their development.

A Review of Weak Gel Fracturing Fluids for Deep Shale Gas Reservoirs.

Low-viscosity slickwater fracturing fluids are a crucial technology for the commercial development of shallow shale gas. However, in deep shale gas formations with high pressure, a higher sand concentration is required to support fractures. Linear gel fracturing fluids and crosslinked gel fracturing fluids have a strong sand-carrying capacity, but the drag reduction effect is poor, and it needs to be pre-prepared to decrease the fracturing cost. Slick water fracturing fluids have a strong drag reduction effect and low cost, but their sand-carrying capacity is poor and the fracturing fluid sand ratio is low. The research and development of viscous slick water fracturing fluids solves this problem. It can be switched on-line between a low-viscosity slick water fracturing fluid and high-viscosity weak gel fracturing fluid, which significantly reduces the cost of single-well fracturing. A polyacrylamide drag reducer is the core additive of slick water fracturing fluids. By adjusting its concentration, the control of the on-line viscosity of fracturing fluid can be realized, that is, 'low viscosity for drag reduction, high viscosity for sand-carrying'. Therefore, this article introduces the research and application status of a linear gel fracturing fluid, crosslinked gel fracturing fluid, and slick water fracturing fluid for deep shale gas reservoirs, and focuses on the research status of a viscous slick water fracturing fluid and viscosity-controllable polyacrylamide drag reducer, with the aim of providing valuable insights for the research on water-based fracturing fluids in the stimulation of deep shale gas reservoirs.

Synthesis and demulsification performance of a novel low-temperature demulsifier based on trimethyl citrate.

A significant amount of water-in-oil (W/O) emulsion is generated during petroleum extraction. However, the current commercial demulsifiers are expensive to produce and requires high demulsification temperatures, leading to increased energy and economic consumption. To enhance the efficiency of demulsifiers and reduce the cost of demulsifying W/O emulsions, we have successfully developed a novel demulsifier named TCED through a straightforward two-step process. This demulsifier features trimethyl citrate as the hydrophilic core grafted with three hydrophobic chains. Its structure was characterized using EA, FT-IR and 1H NMR spectroscopy, and the demulsification performance was comprehensively evaluated. At a low demulsification temperature of 40 °C, TCED demonstrated a remarkable demulsification efficiency (DE) of 99.06% and 98.74% in emulsions containing water contents of 70% (E70) and 50% (E50), respectively. Especially, a DE of 100% could be obtained in both E70 and E50 emulsions at a concentration of 600 mg/L. Moreover, TCED displayed a high DE even at high salinity levels of 50,000 mg/L and across a wide pH range of 2-10. Additionally, the phase interface was consistently clear after demulsification. To investigate the demulsification mechanism of TCED, various adsorption kinetics experiments were conducted, including measurements of interfacial tension (IFT), surface tension (SFT), interfacial competitive adsorption, and stability of interfacial film. The results obtained from the experiments indicated that TCED possessed remarkable diffusion and replacement capabilities within the emulsions. As a result, it effectively disrupted the original interfacial active substances, such as asphaltenes aggregates found in crude oil. TCED exhibits a high DE at low concentration and temperature. This characteristic highlights its significant potential for low-temperature demulsification applications in the petroleum industry.

Resource Utilization of Waste Cooking Oil Catalyzed by Na2CO3/ZSM-5.

A catalyst with a simple synthetic process and good catalytic performance was prepared using Na2CO3 as the active component and ZSM-5 as the carrier for the resource utilization of waste cooking oil. The structure of Na2CO3/ZSM-5 was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy, and the effects of parameters such as Na2CO3 loading, catalyst percentage, and reaction time on the yield of fatty acid methyl esters were investigated. The results showed that the conversion of waste cooking oil to fatty acid methyl esters yielded up to 96.89% when the Na2CO3 loading was 35%, the reaction temperature was 65 °C, the reaction time was 2 h, and the catalyst percentage was 1 wt %. The Na2CO3/ZSM-5 catalyst could be used to replace H2SO4 or NaOCH3 in the industrial treatment of waste cooking oil for its resource utilization.

Optimization of preparation conditions of medium and highly substituted carboxymethyl inulin through response surface methodology.

This article introduces the synthesis optimization of carboxymethyl inulin using response surface methodology. The important factors affecting the degree of substitution (DS) were determined by Plackett-Burman design, including sodium hydroxide concentration, monochloroacetic concentration, and etherification temperature. Further optimization was conducted using the Box-Behnken response surface design. The coefficient of determination (R2) of the response surface model was 0.9827, and the adjusted R2 value was 0.9516, which proved the significance of the model. The optimized results of the predicted response showed that the molar ratios of sodium hydroxide to monochloroacetic acid and fructose to furan were 3.67 and 2.21, respectively. The maximum DS of 1.67 was obtained at 30 °C alkalization for 30 min and 50.30 °C etherification for 4 h, and the reaction efficiency (RE) reached 76.01 %. Under the optimized conditions, the Experimental DS was 1.68, suggesting that the experimental and predicted values of DS were in good agreement. The characterization results confirmed the synthesis of CMI. In this work, we have provided an effective method for the preparation of moderately to highly substituted CMI in 95 % ethanol.

Azide-free cyclization reaction access to 4-aryl-NH-1,2,3-triazoles: P-toluenesulfonyl hydrazide and sulfamic acid as nitrogen sources.

An iodine-mediated cyclization has been developed to 4-aryl-NH-1,2,3-triazoles, with p-toluenesulfonyl hydrazide and sulfamic acid used as nitrogen sources. Sulfamic acid plays a crucial role in this reaction by both acting as a substrate and providing an acidic environment. This reaction offers a metal- and azide-free strategy to access NH-1,2,3-triazoles.

Synthesis and demulsification mechanism of an ionic liquid with four hydrophobic branches and four ionic centers.

Stable emulsions can have numerous negative impacts on both the oil industry and the environment. This study focuses on the synthesis of two ionic liquids (via. PPBD and PPBH) with four hydrophobic branches and four ionic centers that can effectively treat oil-water emulsions at a low temperature of 40 °C. Their chemical structure was explored using Fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance hydrogen spectra (1H NMR). The effect of temperature, PPBD and PPBH concentration, oil-water ratio, salinity and pH value on the demulsification efficiency (DE) of W/O emulsion was studied detailly and several commercial demulsifiers were also used for comparison. Results revealed that by adding 250 mg/L of PPBH in an E30 emulsion and leaving it for 120 min at 40 °C, the DE could reach 96.34%. Meanwhile, in an E30 emulsion (oil-water mass ratio of 3:7) with 250 mg/L of PPBD, the DE of 95.23% could be obtained at 40 °C for 360 min. Especially, the DE of PPBH could reach 100% in an E70 emulsion (oil-water mass ratio of 7:3) at the same conditions. Additionally, the demulsifier (PPBH) exhibited excellent salt resistance and outperformed some commonly used commercial demulsifiers. Several methods were utilized to investigate the potential demulsification mechanism, including measuring interfacial tension (IFT), three-phase contact angle (CA), droplet contact time, zeta potential, and observing samples under optical microscopy.

A novel turn-on fluorescent probe for detection of pH in extremely acidic environment and its application.

A water-soluble turn-on fluorescent probe PNAP for pH has been designed and synthesized. PNAP was consist of pyrene as fluorophore and morpholine as receptor. Owing to the photoinduced electron transfer (PET) effect, the fluorescence of PNAP was quenched, while PNAP exhibited a remarkable "turn-on" fluorescence with the increase of acidity. Notably for its pKa of 2.15, PNAP was one of the pH fluorescent probes used in extremely acidic environments. Furthermore, PNAP also displayed good repeatability, strong anti-ion interference ability, high sensitivity and selectivity toward pH. In addition, PNAP has been successfully applied to the test strips and monitor the pH of environment water samples and realistic samples, showing its good promising prospect.

Tandem Ene/[4 + 2] Cycloaddition Reaction for the Synthesis of 9-Benzylphenanthrenes from Arynes and α-(Bromomethyl)styrenes.

A tandem reaction for the synthesis of phenanthrenes from arynes and α-(bromomethyl)styrenes is reported. The transformation proceeds via an ene reaction of α-(bromomethyl)styrenes with arynes, followed by a [4 + 2] cycloaddition reaction. The reaction generates 9-benzylphenanthrene derivatives in moderate to excellent yields.

Intramolecular redox cyclization reaction access to cinnolines from 2-nitrobenzyl alcohol and benzylamine via intermediate 2-nitrosobenzaldehyde.

A transition-metal-free intramolecular redox cyclization reaction for the synthesis of cinnolines has been developed from 2-nitrobenzyl alcohol and benzylamine. Mechanistic investigations disclosed the involvement of a key intramolecular redox reaction, followed by condensation, azo isomerization to hydrazone, cyclization, and aromatization to form the desired products. Notably, the formation of intermediate 2-nitrosobenzaldehyde and (E)-2-(2-benzylidenehydrazineyl) benzaldehyde plays an important role in this transformation.

Copper/TEMPO-Promoted Denitrogenation/Oxidation Reaction for Synthesis of Primary α-Ketoamides Using α-Azido Ketones.

A copper(II)-promoted denitrogenation/oxidation reaction for the preparation of primary α-ketoamides was developed using α-azido ketones as a substrate and TEMPO as an oxidant. α-Azido ketones were denitrogenated in situ to form an imino ketone intermediate, which underwent a radical addition process and radical migration to form α-ketoamides. It is worth noting that the imino ketone intermediate is the key to this reaction.

Rh(III)-Catalyzed Tandem Reaction Access to (Quinazolin-2-yl)methanone Derivatives from 2,1-Benzisoxazoles and α-Azido Ketones.

A Rh(III)-catalyzed tandem reaction for the synthesis of (quinazolin-2-yl)methanone derivatives has been explored from 2,1-benzisoxazoles and α-azido ketones. The transformation involves Rh(III)-catalyzed denitrogenation of α-azido ketones, aza-[4 + 2] cycloaddition, ring opening, and dehydration aromatization processes. Notably, the aza-[4 + 2] cycloaddition of an imine rhodium complex intermediate with 2,1-benzisoxazoles is the key to this reaction.

Recent progress in cadmium fluorescent and colorimetric probes.

Cadmium is a heavy metal which exists widely in industrial and agricultural production and can induce a variety of diseases in organisms. Therefore, its detection is of great significance in the fields of biology, environment and medicine. Fluorescent probe has been a powerful tool for cadmium detection because of its convenience, sensitivity, and bioimaging capability. In this paper, we reviewed 98 literatures on cadmium fluorescent sensors reported from 2017 to 2021, classified them according to different fluorophores, elaborated the probe design, application characteristics and recognition mode, summarized and prospected the development of cadmium fluorescent and colorimetric probes. We hope to provide some help for researchers to design cadmium fluorescent probes with higher selectivity, sensitivity and practicability.