Effect of sous-vide cooking conditions on the physicochemical, microbiological and microstructural properties of duck breast meat.

OBJECTIVE: Sous-vide cooking offers several advantages for poultry meat, including enhanced tenderness, reduced cooking loss, and improved product yield. However, in duck meat, there are challenges associated with using the sous-vide method. The prolonged cooking time at low temperatures can lead to unstable microbial and oxidative stabilities. Thus, we aimed to assess how varying sous-vide cooking temperatures and durations affect the physicochemical and microbial characteristics of duck breast meat, with the goal of identifying an optimal cooking condition. METHODS: Duck breast meat (Anas platyrhynchos) aged 42 days and with an average weight of 1,400±50 g, underwent cooking under various conditions (ranging from 50°C to 80°C) for either 60 or 180 min. Then, physicochemical, microbial, and microstructural properties of the cooked duck breast meat were assessed. RESULTS: Different cooking conditions affected the quality attributes of the meat. The cooking loss, lightness, yellowness, Hue angle, whiteness, and thiobarbituric acid reactive substance (TBARS) values of the duck breast meat increased with the increase in cooking temperature and time. In contrast, the redness and chroma values decreased with the increase in cooking temperature and time. Cooking of samples higher than 60°C increased the volatile basic nitrogen contents and TBARS. Microbial analysis revealed the presence of Escherichia coli and Coliform only in the samples cooked at 50°C and raw meat. Cooking at lower temperature and shorter time increased the tenderness of the meat. Microstructure analysis showed that the contraction of myofibrils and meat density increased upon increasing the cooking temperature and time. CONCLUSION: Our data indicate that the optimal sous-vide method for duck breast meat was cooking at 60°C for 60 min. This temperature and time conditions showed good texture properties and microbial stability, and low level of TBARS of the duck breast meat.

Development of ß-Cyclodextrin/Konjac-Based Emulsion Gel for a Pork Backfat Substitute in Emulsion-Type Sausage.

Emulsion gel has been used to replace animal fats in meat products. Konjac is a widely used gelling agent; however, its low emulsion stability limits its use in meat products. This study aimed to examine the quality characteristics of ß-cyclodextrin (CD)-supplemented konjac-based emulsion gel (KEG) (CD-KEG) and its application as a fat substitute in emulsion-type sausages. The supplementation of CD increased hydrogen bonds and hydrophobic interactions with konjac and oil in the gels, respectively. Additionally, CD increased the structural complexity and strength of KEG. Since adding more than 6% of CD to KEG did not increase the gel strength, 6% CD-added KEG was adopted to substitute for pork backfat in manufacturing low-fat emulsion-type sausages. The following formulations of the sausages were prepared: pork backfat 20% (PF20); pork backfat 10% + KEG 10% (KEG10); KEG 20% (KEG20); pork backfat 10% + CD-KEG 10% (CD-KEG10); CD-KEG 20% (CD-KEG20); and pork backfat 5% (PF5). The CD-KEG20 formulation exhibited higher viscosity and viscoelasticity than KEG20, which suggested that CD improves the rheological properties and the thermal stability of meat batter. Additionally, CD-KEG20 showed similar emulsion stability, cooking yield and texture parameters compared with PF20. Therefore, 6% CD-added KEG is a suitable fat substitute for preparing low-fat emulsion-type sausages.

Effects of Chitosan and Duck Fat-Based Emulsion Coatings on the Quality Characteristics of Chicken Meat during Storage.

Chicken meat is a popular food commodity that is widely consumed worldwide. However, the shelf-life or quality maintenance of chicken meat is a major concern for industries because of spoilage by microbial growth. The aim of this study was to evaluate the effects of chitosan and duck fat-based emulsion coatings on the quality characteristics and microbial stability of chicken meat during refrigerated storage. The coated chicken meat samples were as follows: control (non-coated), DFC0 (coated with duck fat), DFC0.5 (coated with duck fat and 0.5% chitosan), DFC1 (coated with duck fat and 1% chitosan), DFC2 (coated with duck fat and 2% chitosan), and SOC2 (coated with soybean oil and 2% chitosan). The results showed that the apparent viscosity and coating rate were higher in DFC2 than in other groups. Physicochemical parameters (pH, color, and Warner-Bratzler shear force) were better in DFC2 than those in other groups during 15 days of storage. Moreover, DFC2 delayed lipid oxidation, protein deterioration, and growth of microorganisms during storage. These data suggest that chitosan-supplemented duck fat-based emulsion coating could be used to maintain the quality of raw chicken meat during refrigerated storage.

Effects of duck fat and κ-carrageenan as replacements for beef fat and pork backfat in frankfurters.

OBJECTIVE: Frankfurters are emulsion-type sausages that are widely consumed worldwide. However, some concerns regarding negative health effects have been raised because of the high fat content and the type of fat. This study aimed to evaluate the effects of duck fat and κ-carrageenan as replacements for beef fat and pork backfat in frankfurters. METHODS: The different formulations for the frankfurters were as follows: 20% beef fat (BF), 20% pork backfat (PBF), 20% duck fat (DF), 20% soybean oil (SO), 20% duck fat/1% κ-carrageenan (DFC), and 20% soybean oil/1% κ-carrageenan (SOC). Physicochemical (fatty acid profile, color, rheological properties, cooking loss, water holding capacity, emulsion stability, and texture profile analysis), oxidative stability and sensory properties of frankfurters were evaluated. RESULTS: Duck fat and κ-carrageenan improved rheological properties of meat batter, and physicochemical properties (emulsion stability, cooking loss, and hardness) of frankfurters. Moreover, duck fat added-frankfurters (DF and DFC) had higher oxidative stability than that of soybean-added frankfurters (SO and SOC) during refrigerated storage for 28 days. In sensory evaluation, flavor, texture, and overall acceptability of DFC were acceptable to untrained panelists. CONCLUSION: Our data suggest that duck fat and κ-carrageenan can replace beef fat and pork backfat in frankfurters. Duck fat and κ-carrageenan contributed to improve the physicochemical properties and oxidative stability while maintaining sensory properties. Therefore, the use of duck fat and κ-carrageenan may be a suitable alternative for replacing beef fat or pork backfat in frankfurters.

In Vitro and In Vivo Study on the Toxic Effects of Propiconazole Fungicide in the Pathogenesis of Liver Fibrosis.

Propiconazole (PCZ) is a hepatotoxic triazole fungicide. There are insufficient data on how PCZ induces liver fibrosis in humans. This study aimed to investigate the effect of PCZ on liver fibrosis and its underlying mechanisms. HepG2 cells and Sprague-Dawley rats were exposed to PCZ at doses of 0-160 µM (3-72 h) and 0.5-50 mg/kg body weight/day (28 days), respectively. PCZ-treated cells activated intracellular oxidative stress via cytochrome P450 and had higher mRNA levels of interleukin-1ß, tumor necrosis factor-α, matrix metalloproteinase (MMP)-2, MMP-9, and transforming growth factor-ß (TGF-ß) than the control. PCZ treatment in cells induced a morphological transition with E-cadherin decrease and vimentin and Snail increase via the oxidative stress and TGF-ß/Smad pathways. PCZ administration in rats induced liver fibrosis through pathological changes, epithelial-mesenchymal transition, and collagen deposition. Thus, our data suggest that exposure of PCZ to humans may be a risk factor for the functional integrity of the liver.

Physicochemical properties and oxidative stability of duck fat-added margarine for reducing the use of fully hydrogenated soybean oil.

Soybean oil (SBO) and fully hydrogenated soybean oil (FHSBO) have been used for margarine production. However, SBO-based margarine requires a considerable amount of trans fatty acid-containing FHSBO due to its low melting point. We aimed to reduce the FHSBO content in margarine by employing duck fat, which has a higher melting point than SBO. Margarines were prepared using different ratios of duck fat and reduced levels of SBO and FHSBO. Physicochemical, sensory, and oxidative properties of the margarines were evaluated. The quality characteristics of margarine improved when duck fat replaced SBO and FHSBO. Furthermore, the lipid oxidation parameters were lower in duck fat-added margarines than the control during storage at 60 °C for 28 days. The margarine containing 80% duck fat showed the best sensory properties. Collectively, duck fat can replace SBO in margarine while reducing the use of FHSBO and maintaining desirable physicochemical properties, oxidative stability, and sensory properties.

Evaluation of gels formulated with whey proteins and sodium dodecyl sulfate as a fat replacer in low-fat sausage.

Consumers are increasingly interested in low-fat meat products. Therefore, there is demand for new fat replacers that improve the quality of low-fat meat products. Whey protein isolate (WPI; 10% (w/v)) and sodium dodecyl sulfate (SDS; 0-0.09% (w/v)) were used to produce WPI-SDS gel as a fat replacer of low-fat meat products. Characteristics of WPI-SDS gel were evaluated using SDS-PAGE, FT-IR, viscometer, and texture analyzer. Addition of SDS to WPI increased gelation while reducing aggregation. Addition of 0.06% SDS to WPI-SDS gel has the highest viscosity and hardness, while 0.09% SDS decreased the heat stability of WPI. Quality characteristics including cooking loss, emulsion stability, hardness, and chewiness were significantly improved in WPI-SDS gel-supplemented low-fat sausages. Particularly, the highest hardness and chewiness were obtained in the low-fat sausage added with WPI-SDS gel containing 0.06% SDS. Our results suggest that WPI-SDS gel can be used as a fat replacer in low-fat meat products.

In vitro toxicity assessment of crosslinking agents used in hyaluronic acid dermal filler.

Hyaluronic acid (HA) dermal fillers are produced by crosslinking HA with agents, such as 1,4-butanediol diglycidyl ether (BDDE) and poly (ethylene glycol) diglycidyl ether (PEGDE) to acquire desired properties. Thus, the safety evaluation of these crosslinkers is needed at the cellular level. In the present study, cell viability, cytotoxicity, membrane integrity, reactive oxygen species (ROS), mitochondrial membrane potential (MMP), and inflammatory responses were evaluated in the human keratinocyte cell line, HaCaT and human dermal fibroblast cell line, HDF in response to treatment with the crosslinkers. In both the cell lines, BDDE significantly decreased cell viability at 100-1000 ppm, while PEGDE showed a decrease at 500-1000 ppm. In HaCaT cells, BDDE markedly increased cytotoxicity (lactate dehydrogenase release) at 100-1000 ppm, but PEGDE showed an increase at 500-1000 ppm. Cells treated with BDDE (100 ppm) caused alteration in the integrity of cell membrane and shape. In both the cell lines, BDDE-treated cells showed significantly higher ROS levels and MMP loss than PEGDE-treated cells. Also, BDDE-treated cells exhibited higher COX-2 expression at 100 ppm. Expression of inflammatory cytokines (TNF-α, and IL-1 ß) was higher in BDDE-treated cells. Taken together, PEGDE-treated cells showed markedly lower cytotoxicity, ROS production, and inflammatory responses than BDDE-treated cells. Our data suggest that PEGDE is safer than BDDE as a crosslinker in HA dermal fillers.

Probiotic Properties of Lactiplantibacillus plantarum LB5 Isolated from Kimchi Based on Nitrate Reducing Capability.

The purpose of this study was to investigate the probiotic properties of lactic acid bacteria isolated from Korean radish water kimchi (dongchimi). A total of 800 isolates of lactic acid bacteria were isolated from kimchi, and the strain having reduction and tolerance capability for nitrate and nitrite was selected and identified as Lactiplantibacillus plantarum LB5 (LPLB5) by 16S rRNA sequencing. LPLB5 showed higher tolerance to acidic pH values (pH 2.5), 0.3% bile salts, and heat treatment (40, 50, and 60 °C). Antibacterial activity showed strong inhibition against four food-borne pathogenic bacteria (E. coli O157:H7 ATCC 35150, Pseudomonas aeruginosa KCCM 12539, Listeria monocytogenes KCCM 40307, and Staphylococcus aureus ATCC 25923). The strain did not show any antibiotic resistance, ß-hemolytic activity, or ability to produce ß-glucuronidase. LPLB5 also exhibited a 30% auto-aggregation ability and 33-60% co-aggregation ability with four pathogenic bacteria (E. coli O157: H7 ATCC 35150, E. coli KCTC 2571, L. monocytogenes ATCC 51776, and S. aureus ATCC 25923). Moreover, the strain showed approximately 40% 2,2-diphenyl-1-picryl-hydrazyl (DPPH) radical- and 10% 2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical-scavenging activity. In cell culture studies, human colon epithelial cells (Caco-2) were treated with LPLB5 (106 and 107 CFU/mL); the bacteria showed more than 70% adherence onto and a 32% invasion rate into the Caco-2 cells. LPLB5 significantly decreased the mRNA expression levels of pro-inflammatory cytokines (interleukin-1 beta (IL-1ß), interleukin 6 (IL-6), and tumor necrosis factor-alpha (TNF-α)) and increased the mRNA expression levels of anti-inflammatory cytokines (interleukin-4 (IL-4), interleukin-10 (IL-10), and interferon-gamma (IFN-γ)) in lipopolysaccharide-stimulated Caco-2 cells. Our data suggest that LPLB5 is safe and possesses probiotic, antioxidant, and anti-inflammatory activities.

Effects of Aluminum on the Integrity of the Intestinal Epithelium: An in Vitro and in Vivo Study.

BACKGROUND: Aluminum (Al) is the most abundant and ubiquitous metal in the environment. The main route of human exposure to Al is through food and water intake. Although human exposure to Al is common, the influence of Al on the gastrointestinal tract remains poorly understood. OBJECTIVES: We aimed to further understand the toxic effect of Al and to elucidate the underlying cellular mechanisms in the intestinal barrier. METHODS: The human intestinal epithelial cell line HT-29 and C57BL6 mice were exposed to AlCl3 at 0-16 mM (1-24h) and 5-50mg/kg body weight (13 weeks), respectively. In cell culture experiments, intracellular oxidative stress, inflammatory protein and gene expression, and intestinal epithelial permeability were measured. In animal studies, histological examination, gene expression, and myeloperoxidase (MPO) activity assays were conducted. RESULTS: Cellular oxidative stress level (superoxide production) in AlCl3-treated cells (4 mM, 3h) was approximately 38-fold higher than that of the control. Both protein and mRNA expression of tight junction (TJ) components (occludin and claudin-1) in AlCl3-treated cells (1-4 mM, 24h) was significantly lower than that of the control. Transepithelial electrical resistance (TEER) decreased up to 67% in AlCl3-treated cells (2 mM, 24h) compared with that of the control, which decreased approximately 7%. Al activated extracellular signal-regulated kinase 1/2 and nuclear factor-kappa B (NF-κB), resulting in mRNA expression of matrix metalloproteinase-9, myosin light-chain kinase, and inflammatory cytokines [tumor necrosis factor alpha (TNF-α), interleukin-1ß (IL-1ß), and IL-6] in HT-29 cells. Moreover, oral administration of AlCl3 to mice induced pathological alteration, MPO activation, and inflammatory cytokine (TNF-α, IL-1ß, and IL-6) production in the colon. CONCLUSION: Al induced epithelial barrier dysfunction and inflammation via generation of oxidative stress, down-regulation of the TJ proteins, and production of inflammatory cytokines in HT-29 cells. In addition, Al induced toxicity in the colon by increasing the levels of inflammatory cytokines and MPO activity and induced histological damage in a mouse model. Our data suggest that Al may be a potential risk factor for human intestinal diseases. https://doi.org/10.1289/EHP5701.

Oxidative Stability and Quality Characteristics of Duck, Chicken, Swine and Bovine Skin Fats Extracted by Pressurized Hot Water Extraction.

The aim of this study was to investigate the oxidative status and quality characteristics of four animal skin-derived fats extracted using an identical extraction method. Pressurized hot water extraction, a green extraction method, was used to extract animal skin fats (duck, chicken, swine, and bovine skin). Multiple experiments were performed during accelerated storage at 60°C for 90 days. Quality characteristics, such as extraction yield, iodine value (IV), fatty acid composition, and fat viscosity were determined. In addition, indicators for oxidative status, including acid value (AV), peroxide value (PV), p-anisidine value (p-AV), thiobarbituric acid reactive substances (TBARS), conjugated dienes (CD), and total oxidation (totox) values were evaluated. The fat extraction yield was highest in bovine fat, followed by duck, swine, and chicken fats. The IV was higher in duck and chicken fats. Duck fats contained the most unsaturated fats and the least saturated fats. Fat oxidation indicators, such as PV, TBARS, and totox values, were relatively higher in duck fats during storage compared to the other fats. Other indicators, including AV, p-AV, and CD, were similar in duck, chicken, and swine fats. Viscosity was similar in all the tested fats but markedly increased after 70 days of storage in duck fats. Our data indicate that duck skin fat was more vulnerable to oxidative changes in accelerated storage conditions and this may be due to its higher unsaturated fatty acid content. Supplementation with antioxidants might be a reasonable way to solve the oxidation issue in duck skin fats.