RESUMEN
This paper presents a machine learning-based image analysis method to monitor the particle size distribution of fluidized granules. The key components of the direct imaging system are a rigid fiber-optic endoscope, a light source and a high-speed camera, which allow for real-time monitoring of the granules. The system was implemented into a custom-made 3D-printed device that could reproduce the particle movement characteristic in a fluidized-bed granulator. The suitability of the method was evaluated by determining the particle size distribution (PSD) of various granule mixtures within the 100-2000 µm size range. The convolutional neural network-based software was able to successfully detect the granules that were in focus despite the dense flow of the particles. The volumetric PSDs were compared with off-line reference measurements obtained by dynamic image analysis and laser diffraction. Similar trends were observed across the PSDs acquired with all three methods. The results of this study demonstrate the feasibility of performing real-time particle size analysis using machine vision as an in-line process analytical technology (PAT) tool.
Asunto(s)
Química Farmacéutica , Redes Neurales de la Computación , Tamaño de la Partícula , Química Farmacéutica/métodos , Diagnóstico por Imagen , Tecnología FarmacéuticaRESUMEN
In the last decades, continuous manufacturing (CM) has become a research priority in the pharmaceutical industry. However, significantly fewer scientific researches address the investigation of integrated, continuous systems, a field that needs further exploration to facilitate the implementation of CM lines. This research outlines the development and optimization of an integrated, polyethylene glycol aided melt granulation-based powder-to-tablet line that operates fully continuously. The flowability and tabletability of a caffeine-containing powder mixture were improved through twin-screw melt granulation resulting in the production of tablets with improved breaking force (from 15 N to over 80 N), excellent friability, and immediate release dissolution. The system was also conveniently scaleable: the production speed could be increased from 0.5 kg/h to 8 kg/h with only minimal changes in the process parameters and using the same equipment. Thereby the frequent challenges of scale-up can be avoided, such as the need for new equipment and separate optimization.
Asunto(s)
Excipientes , Tecnología Farmacéutica , Composición de Medicamentos/métodos , Polvos , Tamaño de la Partícula , Comprimidos , Tecnología Farmacéutica/métodosRESUMEN
The aim of this research was to investigate three thermoanalytical techniques from the glass transition temperature (Tg) determination point of view. In addition, the examination of the correlation between the measured Tg values and the stability of the amorphous solid dispersions (ASDs) was also an important part of the work. The results showed that a similar tendency of the Tg can be observed in the case of the applied methods. However, Tg values measured by thermally stimulated depolarization currents showed higher deviation from the theoretical calculations than the values measured by modulated differential scanning calorimetry, referring better to the drug-polymer interactions. Indeed, the investigations after the stress stability tests revealed that micro-thermal analysis can indicate the most sensitive changes in the Tg values, better indicating the instability of the samples. In addition to confirming that the active pharmaceutical ingredient content is a crucial factor in the stability of ASDs containing naproxen and poly(vinylpyrrolidone-co-vinyl acetate), it is worthwhile applying orthogonal techniques to better understand the behavior of ASDs. The development of stable ASDs can be facilitated via mapping the molecular mobilities with suitable thermoanalytical methods.
RESUMEN
Glucose is widely used in both the food and pharmaceutical industry. However, the application of industrially crystallized glucose in solid dosage forms is challenged by its poor flowability and tabletability. To improve these characteristics continuous twin-screw granulation was tested, which has the potential to be integrated into the continuous production of solid glucose from corn starch. A completely continuous manufacturing line (including drying and milling) was developed and the different production steps were examined and synchronized. Our line was supplemented with an in-line applicable near-infrared spectroscopic probe to monitor the moisture content of the milled granules in real-time. The flowability and tabletability of the powder improved significantly, and tablets with acceptable breaking force (greater than 100 N) could be prepared from the granules. The developed continuous line can be easily installed into the industrial solid glucose production process resulting in pure glucose granules with adequate flow properties and tabletability in a simple, continuous and efficient way.
Asunto(s)
Glucosa , Almidón , Composición de Medicamentos/métodos , Tamaño de la Partícula , Polvos/química , Almidón/química , Comprimidos/química , Tecnología Farmacéutica/métodosRESUMEN
In this study, a concentration predicting soft sensor was achieved based on the Residence Time Distribution (RTD) of an integrated, three-step pharmaceutical formulation line. The RTD was investigated with color-based tracer experiments using image analysis. Twin-screw wet granulation (TSWG) was directly coupled with a horizontal fluid bed dryer and an oscillating mill. Based on integrated measurement, we proved that it is also possible to couple the unit operations in silico. Three surrogate tracers were produced with a coloring agent to investigate the separated unit operations and the solid and liquid inputs of the TSWG. The soft sensor's prediction was compared to validating experiments of a 0.05 mg/g (15% of the nominal) concentration change with High-Performance Liquid Chromatography (HPLC) reference measurements of the active ingredient proving the adequacy of the soft sensor (RMSE < 4%).
Asunto(s)
Composición de Medicamentos , Tecnología Farmacéutica , Composición de Medicamentos/métodos , Tamaño de la Partícula , Tecnología Farmacéutica/métodosRESUMEN
The present paper reports the powder filling of milled electrospun materials in vials, which contained voriconazole and sulfobutylether-ß-cyclodextrin. High-speed electrospinning was used for the production of the fibrous sample, which was divided into 6 parts. Each portion was milled using different milling methods and sizes of sieves to investigate whether the milling influences the powder and filling properties. Bulk and tapped density tests, laser diffraction and angle of repose measurements were applied to characterize the milled powders, while a vibratory feeder was used for the feeding experiments. The correlation between the material property descriptors and the feeding responses was investigated by multivariate data analysis. Based on the results, three samples were chosen for the vial filling, which was accomplished with 3400 mg electrospun material containing 200 mg voriconazole, representative of the commercial product. The feed rate was set to fit the 240 g/h production rate of the electrospinning and the relative standard deviation of three repeated vial filling was determined to see the accuracy of the process. This research shows that by applying a suitable milling method it is possible to process electrospun fibers to a powder, which can be filled into vials and used as reconstitution dosage forms.
Asunto(s)
Emolientes , Tecnología Farmacéutica , Polvos , Prueba de Estudio Conceptual , VoriconazolRESUMEN
Electrospinning is a technology for manufacture of nano- and micro-sized fibers, which can enhance the dissolution properties of poorly water-soluble drugs. Tableting of electrospun fibers have been demonstrated in several studies, however, continuous manufacturing of tablets have not been realized yet. This research presents the first integrated continuous processing of milled drug-loaded electrospun materials to tablet form supplemented by process analytical tools for monitoring the active pharmaceutical ingredient (API) content. Electrospun fibers of an amorphous solid dispersion (ASD) of itraconazole and poly(vinylpyrrolidone-co-vinyl acetate) were produced using high speed electrospinning and afterwards milled. The milled fibers with an average fiber diameter of 1.6 ± 0.9 µm were continuously fed with a vibratory feeder into a twin-screw blender, which was integrated with a tableting machine to prepare tablets with ~ 10 kN compression force. The blend of fibers and excipients leaving the continuous blender was characterized with a bulk density of 0.43 g/cm3 and proved to be suitable for direct tablet compression. The ASD content, and thus the API content was determined in-line before tableting and at-line after tableting using near-infrared and Raman spectroscopy. The prepared tablets fulfilled the USP <905> content uniformity requirement based on the API content of ten randomly selected tablets. This work highlights that combining the advantages of electrospinning (e.g. less solvent, fast and gentle drying, low energy consumption, and amorphous products with high specific surface area) and the continuous technologies opens a new and effective way in the field of manufacturing of the poorly water-soluble APIs.
Asunto(s)
Excipientes , Espectrometría Raman , Desecación , Composición de Medicamentos , Itraconazol , Comprimidos , Tecnología FarmacéuticaRESUMEN
This research aimed to compare two solvent-based methods for the preparation of amorphous solid dispersions (ASDs) made up of poorly soluble spironolactone and poly(vinylpyrrolidone-co-vinyl acetate). The same apparatus was used to produce, in continuous mode, drug-loaded electrospun (ES) and spray-dried (SD) materials from dichloromethane and ethanol-containing solutions. The main differences between the two preparation methods were the concentration of the solution and application of high voltage. During electrospinning, a solution with a higher concentration and high voltage was used to form a fibrous product. In contrast, a dilute solution and no electrostatic force were applied during spray drying. Both ASD products showed an amorphous structure according to differential scanning calorimetry and X-ray powder diffraction results. However, the dissolution of the SD sample was not complete, while the ES sample exhibited close to 100% dissolution. The polarized microscopy images and Raman microscopy mapping of the samples highlighted that the SD particles contained crystalline traces, which can initiate precipitation during dissolution. Investigation of the dissolution media with a borescope made the precipitated particles visible while Raman spectroscopy measurements confirmed the appearance of the crystalline active pharmaceutical ingredient. To explain the micro-morphological differences, the shape and size of the prepared samples, the evaporation rate of residual solvents, and the influence of the electrostatic field during the preparation of ASDs had to be considered. This study demonstrated that the investigated factors have a great influence on the dissolution of the ASDs. Consequently, it is worth focusing on the selection of the appropriate ASD preparation method to avoid the deterioration of dissolution properties due to the presence of crystalline traces.