RESUMEN
Development of highly efficient electrocatalysts for treating urea-rich wastewater is an important problem in environmental management and energy production. In this work, an iron-nickel alloy (Fe-Ni alloy) was synthesized via soft-template cetyltrimethylammonium bromide (CTAB)-assisted precipitation using low-temperature calcination. The as-synthesized nanoalloy was characterized by X-ray diffraction (XRD), which revealed the formation of a face-centered cubic (FCC) structure of the Fe-Ni alloy; field emission-scanning electron microscopic (FE-SEM) analysis revealed the spherical shape of the Fe-Ni alloy; high-resolution transmission electron microscopy (HR-TEM) revealed the average size to be â¼33.09 nm; and X-ray photoelectron spectroscopy (XPS) showed the presence of Fe, Ni, C, and O components and their chemical composition and valence states in the Fe-Ni alloy. The electrochemical urea oxidation reaction (UOR) was investigated by conducting linear sweep voltammetry (LSV) tests on the synthesized electrocatalysts with different Ni/Fe ratios in alkaline electrolytes with urea. The potential required to reach a current density of 10 mA cm-2 is 1.27 V vs RHE, which demonstrates the higher electrochemical activity of the Fe-Ni alloy compared to other individual compounds. This could be due to CTAB which improved the structural stability and synergetic and electronic effects in the nanoscale. This study will further contribute to renewable energy generation technology with long-term energy sustainability and also opens up great potential for reducing water pollution.
RESUMEN
Visible light-driven photoelectrochemical (PEC) urea oxidation using inorganic/organic nano-heterostructure (NH) photoanodes is an attractive method for hydrogen (H2) production. In this article, inorganic/organic NHs (TiO2/PDIEH) consisting of a N,N-bis(2-ethylhexyl)perylene-3,4,9,10-tetracarboxylic diimide (PDIEH) thin layer over TiO2 nanorods (NRs) were fabricated for the PEC urea oxidation reaction (UOR). In these NHs, a PDIEH layer was anchored on TiO2 NR arrays using the spin-coating technique, which is beneficial for the uniform deposition of PDIEH on TiO2 NRs. Uniform deposition facilitated adequate interface contact between PDIEH and TiO2 NRs. TiO2/PDIEH NHs achieved a high current density of 1.1 mA cm-2 at 1.96 VRHE compared to TiO2 NRs. TiO2/PDIEH offers long-term stability under light illumination with 90.21% faradaic efficiency. TiO2/PDIEH exhibits a solar-to-hydrogen efficiency of 0.52%. This outcome opens up new opportunities for inorganic/organic NHs for high-performance PEC urea oxidation.
RESUMEN
Herein, the photocatalytic generation of an important solar fuel-H2 O2 -by a thiophene-coupled anthraquinone (AQ) and benzotriazole-based donor (D)-acceptor (A) polymer (PAQBTz) nanoparticles is systematically reported. The visible-light active and redox-active D-A type polymer is synthesized employing the Stille coupling polycondensation, and the nanoparticles are obtained by dispersing the PAQBTz polymer and polyvinylpyrrolidone solution, prepared in tetrahydrofuran to water. The polymer nanoparticles (PNPs) produce 1.61 and 1.36 mM mg-1 hydrogen peroxide (H2 O2 ) in the acidic and neutral media, respectively, under AM1.5G simulated sunlight irradiation (λ > 420 nm) with ≈2% modified Solar to Chemical Conversion (SCC) efficiency after 1 h of visible light illumination in acidic condition. The results of the various experiments lay bare the different aspects governing H2 O2 production and indicate the H2 O2 synthesis through the superoxide anion-mediated and anthraquinone-mediated routes.
Asunto(s)
Nanopartículas , Tiofenos , Hidrógeno , Polímeros , AntraquinonasRESUMEN
Herein, we describe the synthesis, characterization, and optoelectronic investigation of a stable 4nπ dihydrotetraazapentacene derivative. The neutral dihydrotetraazapentacene contains a 24π-conjugated N-heteroacene core with two phenyl pendants appended thereof. The exceptional stability of this formally antiaromatic π-system is attributed to the fused dihydropyrazine ring, which has ethenamine (enamine) conjugations, and hence, the π-electrons delocalize over the nearly planar azapentacene core to endow with a global aromatic characteristic. The embedded dihydropyrazine also offers an additional Clar's sextet with enhanced aromaticity. The present dihydrotetraazapentacene can be considered as a multitasking N-heteroacene, which showed photoresponsive nature under visible light illumination, acidochromism in solution, and p-type charge transport with an appreciable field-effect hole mobility of 0.02 cm2 V-1 s-1 and a bulk p-type mobility of 0.98 × 10-4 cm2 V-1 s-1 in the space charge-limited regime of operation measured in the hole-only device. Nucleus-independent chemical shift calculation, anisotropy of the induced current density plot, and anisotropic mobility calculation were performed to support the experimental findings.
RESUMEN
In the work reported in this article, we have coupled Ti3+-self-doped TiO2 nanorods (NRs) with a newly synthesized tetrathiophene coupled perylene-based molecule (tThTMP) to form type-II inorganic/organic nanoheterostructures (NHs) for visible-light-driven water oxidation. The small organic molecule helps in better utilizing a wide range of the visible light spectrum, facilitates a faster delocalization of the photogenerated carriers at the inorganic/organic heterojunction, and exhibits improved photoelectrochemical performances. We have further decorated the NHs with platinum nanoparticles (NPs). The decoration of the Pt NPs significantly augments the various aspects of photoelectrochemical performances. The Pt NPs decorated NHs photoanode exhibits a photocurrent density of 0.83 mA/cm2 at 1.23 V vs. RHE (@10 mV/s scan rate), a photoconversion efficiency of 0.26%, a substantial cathodic shift in the water oxidation onset potential and flat band potential, impressively reduced charge transfer resistance, improved photocarrier concentration, photovoltage, and stability.
RESUMEN
Bent-shaped thienoacenes show promise as next-generation organic semiconductors. Here we present the synthesis of an air-stable, pure and easily scalable thiophene precursor, 2,5-distannylated-3,4-dialkyne thiophene, starting from 3,4-dialkyne thiophene in quantitative yields. This precursor has been used for the synthesis of a versatile class of syn-thienoacenes comprising up to 13 fused rings, helical acenes and donor-acceptor acenes.
RESUMEN
Arene-fused selenophenes were synthesized by a redox neutral process from arylethynyl substituted polycyclic arenes using selenium powder in refluxing N-methyl-2-pyrrolidone (NMP) with the assistance of the residual water in NMP as a catalytic proton source. The site-selective nature of this selenocyclization produces trans-alkenes as a competitive product, which is dependent on the π-electron donation ability of polycyclic arenes and the kind of arylethynyl group attached to it. DFT calculations were performed to understand the site selectivity in the selenophene formation reaction. The HOMO coefficient on the carbon adjacent to carbon having arylalkyne substituent of the polycyclic arene correlates with the selenocyclization tendency of the substrate. The wavelength of absorption and emission and quantum yield of emission increase with increasing the number of fused benzene rings in the polycyclic unit (from naphthalene to pyrene).
RESUMEN
This research article reports the visible-light-driven photoelectrochemical water oxidation performances of the plasmonic Au-Pd nanoparticle-decorated inorganic/organic nano-heterostructures (NHs)-B-TiO2/NDIEHTh@Au-Pd. The inorganic constituent of the NHs consists of boron-doped TiO2 nanorods (NRs) grown on fluorine-doped tin oxide (FTO) coated glass substrate. The organic part (NDIEHTh) consists of an acceptor naphthalene diimide (NDI)-based donor-acceptor-donor (D-A-D) type small molecule, in which thiophene serves as the donor. Because of the benefits of the localized surface plasmon resonance (LSPR) effect, the Au-Pd binary alloy nanoparticles substantially ameliorate the visible-light-driven photoelectrochemical performances of the B-TiO2/NDIEHTh@Au-Pd NHs photoanode compared to the B-TiO2/NDIEHTh NHs photoanode. The photocurrent densities exhibited by the B-TiO2/NDIEHTh NHs, and B-TiO2/NDIEHTh@Au-Pd NHs photoanodes at 1 V vs Ag/AgCl are 0.68 mA/cm2 and 1.59 mA/cm2, respectively, manifesting 209% and 623% increments in the photocurrent density compared to that shown by B-TiO2 NRs photoanode. Besides, the B-TiO2/NDIEHTh@Au-Pd NHs photoanode offers a significantly cathodically shifted water oxidation potential, reduced charge transfer resistance, better surface injection efficiency, and most importantly, superior photostability compared to the B-TiO2/NDIEHTh NHs photoanode. The enhancement in the different photoelectrochemical performances could be attributed to the various advantages of LSPR, such as enhanced light absorbance, light concentration, hot electron injection, and plasmon-induced resonance energy transfer.
RESUMEN
Herein we report the synthesis, characterization and application of an azaheterocycle 4 obtained via an unprecedented C-N coupling. The neutral azaheterocycle undergoes one-electron reduction to form an air-stable radical anion in situ, which provides added benefit towards operational stability of the device during n-type charge transport. The unusual stability of this radical anion is due to the fact that the fused cyclopentane ring upon reduction forms aromatic cyclopentadienyl anion, and the negative charge delocalizes over the nearly planar azaheterocycle core. The present azaheterocycle can be considered as a mimic of a fullerene fragment, which shows balanced ambipolar charge transport in space charge limited current (SCLC) devices with moderate hole (µh) and electron (µe) mobilities (µh = 2.96 × 10-3 cm2 V-1 s-1 and µe = 1.11 × 10-4 cm2 V-1 s-1). Theoretical studies such as nucleus independent chemical shifts (NICS) calculations, anisotropy of the induced current density (ACID) plots, spin density mapping and anisotropic mobility calculations were performed to corroborate the experimental findings.
RESUMEN
Owing to the advantages of 3-D printable stack, scalability and low cost solution state production, polymer-based resistive memory devices have been identified as the promising alternative for conventional oxide technology. Resistive memory devices based on the redox switch mechanism is particularly found to yield high precision with respect to the operational voltages. Reversible non-volatile resistive state switching was realized with high device yield (>80%), with a redox-active chemical entity conjugated to the polymeric semiconductor, and the control experiments with the model compound confirmed the imperative role of the redox-active anthraquinone center in the polymeric backbone. Highly uniform nanodomains and the trap free layers excluded the possibilities of other known switching mechanisms. Optical studies and the molecular modelling data assert the presence of strong charge transfer characteristics upon optical excitation due to the insertion of the anthraquinone unit, which was detrimental in exhibiting bistable conductive states in electrical bias as well.
RESUMEN
We report here the first example of BF2 formazanates with thiophene capping and their π-conjugated polymers in the form of electroactive uniform thin films by electrochemical polymerization. These new formazanates and their polymers possess panchromatic absorption with low lying frontier molecular orbitals. With small band gaps (1.5-1.8 eV), they are good candidates for organic electronics and light-harvesting applications. A computational study on the charge transport properties of BF2 formazanates with 3,4-ethylenedioxythiophene (EDOT) indicates an ambipolar semiconductor nature.
RESUMEN
The nucleophilic substitution on 3-substituted 2-methoxytropones to form azulenes is dependent on the nucleophile and base employed. With bulkier nucleophiles (ethyl/methyl cyanoacetate), the reaction proceeds with the abnormal nucleophilic substitution irrespective of the base and with smaller nucleophiles (malononitrile), the reaction follows base-dependent normal and abnormal nucleophilic substitution. Thus, the methodologies are developed to selectively obtain 4- and 5-substituted azulenes based on the nature of bases and nucleophiles employed.
RESUMEN
We present the one-dimensional optical-waveguiding crystal dithieno[3,2-a:2',3'-c]phenazine with a high aspect ratio, high mechanical flexibility, and selective self-absorbance of the blue part of its fluorescence (FL). While macrocrystals exhibit elasticity, microcrystals deposited at a glass surface behave more like plastic crystals due to significant surface adherence, making them suitable for constructing photonic circuits via micromechanical operation with an atomic-force-microscopy cantilever tip. The flexible crystalline waveguides display optical-path-dependent FL signals at the output termini in both straight and bent configurations, making them appropriate for wavelength-division multiplexing technologies. A reconfigurable 2×2-directional coupler fabricated via micromanipulation by combining two arc-shaped crystals splits the optical signal via evanescent coupling and delivers the signals at two output terminals with different splitting ratios. The presented mechanical micromanipulation technique could also be effectively extended to other flexible crystals.
RESUMEN
A convenient and effective synthetic approach for benzochalcogendiazole-based small molecules has been achieved using polyaniline (PANI)-anchored palladium as a heterogeneous catalyst. The photophysical properties of the synthesized benzochalcogendiazole-based small molecules, having different terminal substituents, have been compared. Moreover, the structural aspects, including the packing patterns and non-bonding interactions of the conjugated molecules, have been investigated using the single crystal X-ray diffraction (SCXRD) technique.
RESUMEN
Azulene is a non-alternant non-benzenoid aromatic system, and in turn, it possesses unusual photophysical properties. Azulene-based conjugated systems have received increasing interest in recent years as optoelectronic materials. Despite the routes available for the preparation of substituted azulene derivatives, there remain few methods that allow regioselective substitution on the seven-membered ring of azulenes due to the subtle reactivity difference among the various positions. This report explores the reactivity of substituted tropolones as the azulene precursors and also provides a new method to create 5-substituted azulenes. The reaction of cyanoacetate enolate with unsubstituted 2-methoxytropone affords azulene through the attack of the nucleophile on the C-2 center (normal pathway). We have observed that 3-substituted 2-methoxytropones undergo steric-guided nucleophilic addition at the C-7 center (abnormal pathway) to afford 5-substituted azulene derivatives. Based on this observation and DFT calculation, a new synthetic strategy is devised for the regioselective synthesis of 5-substituted multifunctional azulenes, which cannot be accessed by any other method.
RESUMEN
A single-step intramolecular radical cascade reaction of diynes and thioacetic acid in the presence of a catalytic amount of azobis(isobutyronitrile) as a radical initiator has been developed to synthesize thiophenes. This method allows easy and effective construction of a thiophene scaffold having 3,4-fused-ring substitution and unsubstituted 2,5-positions for further functionalization and polymerization. Using this method, derivatives of cyclopenta[ c]thiophene, 3,4-ethylenedioxythiophene, and thiophene-containing spirocyclic compound have been synthesized.
RESUMEN
Three new triphenylamine based dyes with Donor-Donor-Spacer-Acceptor (D-D-π-A) arrangement were designed and synthesized by convenient synthetic pathway. Unsymmetrical extended donor part may help to reduce the aggregation of dyes on the semiconductor surface. Wide range of absorption in the visible spectrum, electrochemical studies and theoretical optimization suggest that these dyes can be good members for DSSC. Further to check the performance of these dyes in device the solar cells were developed using iodine free Co-based electrolyte. Electronic characterisation concludes that devices based on D6 have the highest power conversion efficiency (4.7%) mostly due to an improved electron lifetime, which therefore improves both the VOC and JSC of the devices.
RESUMEN
Mononuclear cuprous complexes 1 and 2, [{CH3E(o-C6H4)CH=NCH2}2Cu]ClO4; E=S/Se, have been synthesized by the reaction of bis(methyl)(thia/selena) salen ligands and [Cu(CH3CN)4]ClO4. Both the products were characterized by elemental analysis, ESI-MS, FT-IR, 1H/13C/77Se NMR, and cyclic voltammetry. The complexes possess tetrahedral geometry around metal center with the N2S2/N2Se2 coordination core. Cyclic voltammograms of complexes 1 and 2 displayed reversible anodic waves at E1/2=+0.08V and +0.10V, respectively, corresponding to the Cu(I)/Cu(II) redox couple. DNA binding studies of both the complexes were performed applying absorbance, fluorescence and molecular docking techniques. Competitive binding experiment of complexes with ct-DNA against ethidium bromide is performed to predict the mode of binding. The results indicate the groove binding mode of complexes 1 and 2 to DNA. The binding constants revealed the strong binding affinity of complexes towards ct-DNA.
Asunto(s)
Cobre/química , ADN/metabolismo , Compuestos Organometálicos/síntesis química , Animales , Bovinos , ADN/química , Electroquímica , Etidio/química , Ligandos , Conformación Molecular , Simulación del Acoplamiento Molecular , Oxidación-Reducción , Espectrometría de FluorescenciaRESUMEN
The first application of the diselenolodiselenole (C4Se4) heterocycle as an active organic field effect transistor materials is demonstrated here. C4Se4 derivatives (2a-2d) were obtained by using a newly developed straightforward diselenocyclization protocol, which includes the reaction of diynes with selenium powder at elevated temperature. C4Se4 derivatives exhibit strong donor characteristics and planar structure (except 2d). The atomic force microscopic analysis and thin-film X-ray diffraction pattern of compounds 2a-2d indicated the formation of distinct crystalline films that contain large domains. A scanning electron microscopy study of compound 2b showed development of symmetrical grains with an average diameter of 150 nm. Interestingly, 2b exhibited superior hole mobility, approaching 0.027 cm(2) V(-1) s(-1) with a transconductance of 9.2 µS. This study correlate the effect of π-stacking, Se···Se intermolecular interaction, and planarity with the charge transport properties and performance in the field effect transistor devices. We have shown that the planarity in C4Se4 derivatives was achieved by varying the end groups attached to the C4Se4 core. In turn, optoelectronic properties can also be tuned for all these derivatives by end-group variation.
RESUMEN
The synthesis of new conjugated building blocks, diselenolodiselenole (C4Se4) derivatives, is described for the first time. The structural and optoelectronic properties of C4Se4-derivatives are tuned by varying end-capping aromatic substituents. In cyclic voltammetry, all C4Se4-derivatives show two reversible oxidation peaks.