Lipopeptide biosurfactant as a potential root canal irrigation agent: Antimicrobial and anti-biofilm evaluation.

OBJECTIVES: Lipopeptide Biosurfactant (LB) is a bacteria derived compound able to reduce surface tension between water and hydrophobic substances and exhibit antimicrobial and anti-biofilm properties. This study aimed to investigate the antimicrobial and anti-biofilm effect of a Lipopeptide Biosurfactant (LB) on Enterococcus faecalis, and its potential use in root canal treatment, either as a standalone irrigation solution or in conjunction with sodium hypochlorite (NaOCl). METHODS: LB was extracted from Bacillus clausii isolate and the dry extract was diluted in deionized water. The antimicrobial effect of LB against planktonic E. faecalis was evaluated by determining the Minimal Inhibitory Concentration (MIC50). The anti-biofilm effect was evaluated by Minimal Biofilm Inhibitory Concentration (MBIC50) and Minimal Biofilm Eradication Concentration (MBEC50) assays on biofilm grown on dentin specimen surface. To evaluate the effectiveness of LB as a single irrigation solution and as a pre-irrigation prior to NaOCl, live and dead bacterial cells were quantified using Confocal Laser Scanning Microscopy (CLSM), and cell biomass was assessed. RESULTS: LB exhibited an MIC50 and MBIC50 of 100 ppm, with an MBEC50 of 1000 ppm, resulting in 52.94 % biofilm inhibition and 60.95 % biofilm eradication on dentin specimens. The effectiveness was concentration-dependent, at 500 ppm, LB demonstrated comparable antimicrobial efficacy to 2.5 % NaOCl. Pre-irrigation with LB resulted in lower biofilm biomass compared to NaOCl alone. CONCLUSION: Pre-irrigation with LB enhanced the antimicrobial effect when followed by NaOCl irrigation. Consequently, LB shows promise as both a standalone root canal irrigation solution and as an adjunct to NaOCl in root canal treatment. CLINICAL SIGNIFICANCE: The study highlights the potential of Lipopeptide Biosurfactant (LB) as an environmentally friendly irrigation solution for root canal treatment, demonstrating potent antimicrobial and anti-biofilm properties against Enterococcus faecalis. LB exhibits concentration-dependent efficacy comparable to 2.5 % NaOCl and can be used as a standalone irrigation solution or in conjunction with NaOCl.

Effect of gutta-percha solvents on the push-out bond strength to root dentin of a syringe-mixed resin sealer and premixed bioceramic sealer.

PURPOSE: To assess the push out bond strength (POBS) of a syringe-mixed resin sealer and a premixed bioceramic sealer to root dentin exposed to different gutta-percha (GP) solvents and to determine the mode of failure. METHODS: A total of 200 horizontal root slices (1 mm thickness) were prepared up to size 40, 0.04 taper and randomly divided into four main groups based on solvent (Endosolv, orange oil, chloroform) and control (saline), then subdivided into two subgroups based on sealer type (AH Plus Jet and iRoot SP). Samples were exposed to respective solvents for 5 minutes and after the final rinsing, canal spaces were filled with either AH Plus Jet or iRoot SP. POBS test was performed 2 weeks after incubation and mode of failure following POBS test was evaluated. Data were analyzed using two-way ANOVA and Dunnett post hoc analysis (P< 0.05). Failure mode patterns were categorized as adhesive, cohesive and mixed failures. RESULTS: There was no significant difference (P> 0.05) in POBS between all solvent groups against the control in both AH Plus Jet and iRoot SP groups. Regardless of the use of solvents, AH Plus Jet group had significantly higher bond strength (P< 0.001) compared to iRoot SP group. The predominant mode of failure was mixed failure in all groups irrespective of type of sealer and exposure to solvents. CLINICAL SIGNIFICANCE: This study showed that exposure to gutta-percha solvents (chloroform, orange oil and Endosolv) for 5 minutes did not affect the bond strengths of both iRoot SP (bioceramic sealer) and AH Plus (resin sealer) to root dentin.

Bioactivity and remineralization potential of modified glass ionomer cement: A systematic review of the impact of calcium and phosphate ion release.

This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.

Efficacy and bone-contact biocompatibility of glass ionomer cement as a biomaterial for bone regeneration: A systematic review.

Bone regeneration is a rapidly growing field that seeks to develop new biomaterials to regenerate bone defects. Conventional bone graft materials have limitations, such as limited availability, complication, and rejection. Glass ionomer cement (GIC) is a biomaterial with the potential for bone regeneration due to its bone-contact biocompatibility, ease of use, and cost-effectiveness. GIC is a two-component material that adheres to the bone and releases ions that promote bone growth and mineralization. A systematic literature search was conducted using PubMed-MEDLINE, Scopus, and Web of Science databases and registered in the PROSPERO database to determine the evidence regarding the efficacy and bone-contact biocompatibility of GIC as bone cement. Out of 3715 initial results, thirteen studies were included in the qualitative synthesis. Two tools were employed in evaluating the Risk of Bias (RoB): the QUIN tool for assessing in vitro studies and SYRCLE for in vivo. The results indicate that GIC has demonstrated the ability to adhere to bone and promote bone growth. Establishing a chemical bond occurs at the interface between the GIC and the mineral phase of bone. This interaction allows the GIC to exhibit osteoconductive properties and promote the growth of bone tissue. GIC's bone-contact biocompatibility, ease of preparation, and cost-effectiveness make it a promising alternative to conventional bone grafts. However, further research is required to fully evaluate the potential application of GIC in bone regeneration. The findings hold implications for advancing material development in identifying the optimal composition and fabrication of GIC as a bone repair material.

Carbonation inhibitor by polyethylene glycol encapsulation of calcium hydroxide fine particles to improve antimicrobial and root canal penetration properties.

The carbonation of calcium hydroxide (Ca(OH)2) is affected by humidity and a saturated atmosphere. Ca(OH)2 from nature is easily carbonation and self-aggregates into calcium carbonate (CaCO3), resulting in larger particle size impairing the antimicrobial properties due to lack of penetration into the dentinal tubules and lower ion dissociation. To reduce the particle size, the wet beads milling process with distilled water as the medium is commonly used, but often results in great carbonation of the final product. Polyethylene Glycol (PEG) may inhibit the carbonation process as well as re-agglomeration. However, it requires intensive drying of the fine Ca(OH)2 particles. As an alternative, we used ethanol as a medium in the milling process, which is easily dried and compatible with PEG as a surfactant. This study aimed to evaluate PEG 400 as a dispersing agent in ethanol medium in the beads milling process to prevent carbonation of the fine Ca(OH)2 particles. The following groups were analysed CaP-PEG (Ca(OH)2-PEG) with ethanol as a medium, CaP-Eth (Ca(OH)2 with ethanol as a medium), CaP-DW (Ca(OH)2 with distilled water as a medium), CaPC (Ca(OH)2-carbonated) as the negative control and CaC (Ca(OH)2 analytical grade) as the positive control The final particle results were characterized to evaluate the crystal structure, functional groups, and particle size. The corresponding pH and antimicrobial activity against Enterococcus faecalis were assessed at 1, 3, 7, and 14 days. The penetration ability was evaluated by Scanning Electron Microscope. The data obtained were analysed by ANOVA with a significance level of 5%. PEG was able to inhibit carbonation and stabilize pH for up to 14 days, providing increased antimicrobial activity against E. faecalis. PEG also facilitates the ability of fine Ca(OH)2 particles to penetrate deeper into the dentine tubules by reducing particle size.

Longitudinal association between periodontal condition and glycaemic status in middle-aged adults: A cross-lagged panel analysis.

AIM: To investigate the existence of a bidirectional temporal relationship between periodontal condition and glycaemic status. MATERIALS AND METHODS: This longitudinal study included 2198 participants with mean age 43.4 ± 7.7 years, who underwent dental examinations in Yokohama, Japan, at two time points, 2003-2004 and 2008-2009, at an interval of 5 years. Periodontal condition was assessed by the mean value of probing pocket depth (PPD) and clinical attachment level (CAL). Glycaemic status was assessed by fasting glucose and glycated haemoglobin (HbA1c). RESULTS: The cross-lagged panel models showed the effect of HbA1c at baseline on mean PPD at follow-up (ß = 0.044, p = .039). There was a marginal effect of fasting glucose on the mean PPD (ß = 0.037, p = .059). It was similar to the effect of fasting glucose or HbAlc on mean CAL. However, in the opposite direction, no effect of mean PPD or CAL at baseline on fasting glucose or HbAlc at follow-up was identified. CONCLUSIONS: This study demonstrated a unidirectional relationship between glycaemic status and periodontal condition. The study population, however, had mostly mild periodontitis. Future studies are needed to investigate the effect of periodontal condition on glycaemic status in patients with severe periodontitis.

Bioactive Carbonate Apatite Cement with Enhanced Compressive Strength via Incorporation of Silica Calcium Phosphate Composites and Calcium Hydroxide.

Carbonate apatite (CO3Ap) is a bioceramic material with excellent properties for bone and dentin regeneration. To enhance its mechanical strength and bioactivity, silica calcium phosphate composites (Si-CaP) and calcium hydroxide (Ca(OH)2) were added to CO3Ap cement. The aim of this study was to investigate the effect of Si-CaP and Ca(OH)2 on the mechanical properties in terms of the compressive strength and biological characteristics of CO3Ap cement, specifically the formation of an apatite layer and the exchange of Ca, P, and Si elements. Five groups were prepared by mixing CO3Ap powder consisting of dicalcium phosphate anhydrous and vaterite powder added by varying ratios of Si-CaP and Ca(OH)2 and 0.2 mol/L Na2HPO4 as a liquid. All groups underwent compressive strength testing, and the group with the highest strength was evaluated for bioactivity by soaking it in simulated body fluid (SBF) for one, seven, 14, and 21 days. The group that added 3% Si-CaP and 7% Ca(OH)2 had the highest compressive strength among the groups. SEM analysis revealed the formation of needle-like apatite crystals from the first day of SBF soaking, and EDS analysis indicated an increase in Ca, P, and Si elements. XRD and FTIR analyses confirmed the presence of apatite. This combination of additives improved the compressive strength and showed the good bioactivity performance of CO3Ap cement, making it a potential biomaterial for bone and dental engineering applications.

Calcium release and physical properties of modified carbonate apatite cement as pulp capping agent in dental application.

BACKGROUND: Carbonate apatite (CO3Ap) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, CO3Ap induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality. The aim of this study is to investigate modification of CO3Ap cement combined with SCPC, later term as CO3Ap-SCPC cement (CAS) in means of its chemical (Calcium release) and physical properties (setting time, DTS and pH value). METHODS: The study consist of three groups; group 1 (100% calcium hydroxide, group 2 CO3Ap (60% DCPA: 40% vaterite, and group 3 CAS (60% DCPA: 20% vaterite: 20% SCPC. Distilled water was employed as a solution for group 1, and 0.2 mol/L Na3PO4 used for group 2 and group 3.Samples were evaluated with respect to important properties for pulp capping application such as pH, setting time, mechanical strength and calcium release evaluation. RESULTS: The fastest setting time was in CO3Ap cement group without SCPC, while the addition of 20% SCPC slightly increase the pH value but did not improved the cement mechanical strength, however, the mechanical strength of both CO3Ap groups were significantly higher than calcium hydroxide. All three groups released calcium ions and had alkaline pH. Highest pH level, as well as calcium released level, was in the control group. CONCLUSION: The CAS cement had good mechanical and acceptable chemical properties for pulp capping application compared to calcium hydroxide as a gold standard. However, improvements and in vivo studies are to be carried out with the further development of this material.