Molecular-Weight-Dependent Degradation of Plastics: Deciphering Host-Microbiome Synergy Biodegradation of High-Purity Polypropylene Microplastics by Mealworms.

The biodegradation of polypropylene (PP), a highly persistent nonhydrolyzable polymer, by Tenebrio molitor has been confirmed using commercial PP microplastics (MPs) (Mn 26.59 and Mw 187.12 kDa). This confirmation was based on the reduction of the PP mass, change in molecular weight (MW), and a positive Δδ13C in the residual PP. A MW-dependent biodegradation mechanism was investigated using five high-purity PP MPs, classified into low (0.83 and 6.20 kDa), medium (50.40 and 108.0 kDa), and high (575.0 kDa) MW categories to access the impact of MW on the depolymerization pattern and associated gene expression of gut bacteria and the larval host. The larvae can depolymerize/biodegrade PP polymers with high MW although the consumption rate and weight losses increased, and survival rates declined with increasing PP MW. This pattern is similar to observations with polystyrene (PS) and polyethylene (PE), i.e., both Mn and Mw decreased after being fed low MW PP, while Mn and/or Mw increased after high MW PP was fed. The gut microbiota exhibited specific bacteria associations, such as Kluyvera sp. and Pediococcus sp. for high MW PP degradation, Acinetobacter sp. for medium MW PP, and Bacillus sp. alongside three other bacteria for low MW PP metabolism. In the host transcriptome, digestive enzymes and plastic degradation-related bacterial enzymes were up-regulated after feeding on PP depending on different MWs. The T. molitor host exhibited both defensive function and degradation capability during the biodegradation of plastics, with high MW PP showing a relatively negative impact on the larvae.

Microplastics shaped performance, microbial ecology and community assembly in simultaneous nitrification, denitrification and phosphorus removal process.

The widespread use of microplastics (MPs) has led to an increase in their discharge to wastewater treatment plants. However, the knowledge of impact of MPs on macro-performance and micro-ecology in simultaneous nitrification, denitrification, and phosphorus removal (SNDPR) systems is limited, hampering the understanding of potential risks posed by MPs. This study firstly comprehensively investigated the performance, species interactions, and community assembly under polystyrene (PS) and polyvinyl chloride (PVC) exposure in SNDPR systems. The results showed under PS (1, 10 mg/L) and PVC (1, 10 mg/L) exposure, total nitrogen removal was reduced by 3.38-10.15 %. PS and PVC restrained the specific rates of nitrite and nitrate reduction (SNIRR, SNRR), as well as the activities of nitrite and nitrate reductase enzymes (NIR, NR). The specific ammonia oxidation rate (SAOR) and activity of ammonia oxidase enzyme (AMO) were reduced only at 10 mg/L PVC. PS and PVC enhanced the size of co-occurrence networks, niche breadth, and number of key species while decreasing microbial cooperation by 5.85-13.48 %. Heterogeneous selection dominated microbial community assembly, and PS and PVC strengthened the contribution of stochastic processes. PICRUSt prediction further revealed some important pathways were blocked by PS and PVC. Together, the reduced TN removal under PS and PVC exposure can be attributed to the inhibition of SAOR, SNRR, and SNIRR, the restrained activities of NIR, NR, and AMO, the changes in species interactions and community assembly mechanisms, and the suppression of some essential metabolic pathways. This paper offers a new perspective on comprehending the effects of MPs on SNDPR systems.

Fabrication of AQ2S/GR composite photosensitizer for the simulated solar light-driven degradation of sulfapyridine.

Chlorination has been intensively investigated for use in water disinfection and pollutant elimination due to its efficacy and convenience; however, the generation and transportation of chlorine and hypochlorite are energy-consuming and complicated. In this study, a novel binary photosensitizer consisting of anthraquinone-2-sulfonate (AQ2S) and graphene was synthesized via a π-π stack adsorption method; this compound could allow for the chlorination of organic pollutants using on-site chlorine generation. In this photosensitive degradation process, sulfapyridine (SPY) was selected as a model pollutant and was decomposed by the reactive species (Cl2 •-, Cl• and O2 •-) generated during the photosensitive oxidation of chloride. The synthesized AQ2S/graphene exhibited superior activity, and the degradation rate of SPY was over 90 % after 12 h of visible light irradiation with a kinetic constant of 0.2034h-1. Results show that 20 mg AQ2S/GR at a 21 % weight percentage of AQ2S in a pH 7 SPY solution with 1 mol/L Cl- achieved the highest kinetics rate at 0.353 h-1. Free radical trapping experiments demonstrated that Cl2 •- and O2 •- were the dominant species involved in SPY decomposition under solar light. The reusability and stability of this composite were verified by conducting a cycle experiment over five successive runs. The capacity of photodegradation still remained over 90 % after these 5 runs. The current study provides an energy-efficient and simple-operational approach for water phase SPY control.

A biochar-promoted V2O5/g-C3N4 Z-Scheme heterostructure for enhanced simulated solar light-driven photocatalytic activity.

A ternary biochar/vanadium pentoxide/graphite like carbon nitride (BC/V2O5/g-C3N4 denoted BC/VO/CN) composite was prepared by a simple hydrothermal method and its photocatalytic performance was investigated under simulated solar irradiation. The BC/VO/CN was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy. Within the BC/VO/CN composites VO nanoparticles were highly crystalline and intertwined with the lamellas of CN, resulting in the formation of well-defined Z-type heterostructures. The photocatalytic activity was evaluated using Rhodamine B as a model pollutant. Under simulated solar (230-780 nm) irradiation the as-prepared BC/VO/CN hybrid materials demonstrated highly improved photocatalytic activity compared to CN, VO and VO/CN. The cause of the solar enhancement could be ascribed to the formation of Z-type heterojunctions between VO and CN, which promoted faster electron-hole separation and more efficient charge transfer. BC, as an electron transfer medium, accelerated the transfer of photogenerated charge carriers and inhibited their recombination.

Curcumin loaded mixed micelles composed of Pluronic P123 and F68: preparation, optimization and in vitro characterization.

In this study, curcumin (Cur) loaded mixed micelles (Cur-PF), composed of Pluronic P123 (P123) and Pluronic F68 (F68), was prepared using the thin-film hydration method and evaluated in vitro. The preparation process was optimized with a central composite design (CCD). The average size of the mixed micelles was 68.2 nm, and the encapsulating efficiency for Cur was 86.93%, and 6.996% for drug-loading. Compared with the Cur propylene glycol solution, the in vitro release of Cur from Cur-PF presented the sustained-release property. The in vitro cytotoxicity assay showed that the IC(50) values on MCF-7 cells for Cur-PF and free Cur in DMSO solution were 5.04 µg/mL and 8.35 µg/mL, while 2.52 µg/mL and 8.27 µg/mL on MCF-7/ADR cells. It could be concluded from the results that P123/F68 mixed micelles might serve as a potential nanocarrier to improve the solubility and biological activity of Cur.