Synergistic Layered Design of Aerogel Nanocomposite of Graphene Nanoribbon/MXene with Tunable Absorption Dominated Electromagnetic Interference Shielding.

Electromagnetic pollution presents growing challenges due to the rapid expansion of portable electronic and communication systems, necessitating lightweight materials with superior shielding capabilities. While prior studies focused on enhancing electromagnetic interference (EMI) shielding effectiveness (SE), less attention is given to absorption-dominant shielding mechanisms, which mitigate secondary pollution. By leveraging material science and engineering design, a layered structure is developed comprising rGOnR/MXene-PDMS nanocomposite and a MXene film, demonstrating exceptional EMI shielding and ultra-high electromagnetic wave absorption. The 3D interconnected network of the nanocomposite, with lower conductivity (10-3-10-2 S/cm), facilitates a tuned impedance matching layer with effective dielectric permittivity, and high attenuation capability through conduction loss, polarization loss at heterogeneous interfaces, and multiple scattering and reflections. Additionally, the higher conductivity MXene layer exhibits superior SE, reflecting passed electromagnetic waves back to the nanocomposite for further attenuation due to a π/2 phase shift between incident and back-surface reflected electromagnetic waves. The synergistic effect of the layered structures markedly enhances total SE to 54.1 dB over the Ku-band at a 2.5 mm thickness. Furthermore, the study investigates the impact of hybridized layered structure on reducing the minimum required thickness to achieve a peak absorption (A) power of 0.88 at a 2.5 mm thickness.

In vitro evaluation of bone cell response to novel 3D-printable nanocomposite biomaterials for bone reconstruction.

Critically-sized segmental bone defects represent significant challenges requiring grafts for reconstruction. 3D-printed synthetic bone grafts are viable alternatives to structural allografts if engineered to provide appropriate mechanical performance and osteoblast/osteoclast cell responses. Novel 3D-printable nanocomposites containing acrylated epoxidized soybean oil (AESO) or methacrylated AESO (mAESO), polyethylene glycol diacrylate, and nanohydroxyapatite (nHA) were produced using masked stereolithography. The effects of volume fraction of nHA and methacrylation of AESO on interactions of differentiated MC3T3-E1 osteoblast (dMC3T3-OB) and differentiated RAW264.7 osteoclast cells with 3D-printed nanocomposites were evaluated in vitro and compared with a control biomaterial, hydroxyapatite (HA). Higher nHA content and methacrylation significantly improved the mechanical properties. All nanocomposites supported dMC3T3-OB cells' adhesion and proliferation. Higher amounts of nHA enhanced cell adhesion and proliferation. mAESO in the nanocomposites resulted in greater adhesion, proliferation, and activity at day 7 compared with AESO nanocomposites. Excellent osteoclast-like cells survival, defined actin rings, and large multinucleated cells were only observed on the high nHA fraction (30%) mAESO nanocomposite and the HA control. Thus, mAESO-based nanocomposites containing higher amounts of nHA have better interactions with osteoblast-like and osteoclast-like cells, comparable with HA controls, making them a potential future alternative graft material for bone defect repair.

Greatly Enhanced Electromagnetic Interference Shielding Effectiveness and Mechanical Properties of Polyaniline-Grafted Ti3C2Tx MXene-PVDF Composites.

Nowadays, evolutions in wireless telecommunication industries, such as the emergence of complex 5G technology, occur together with massive development in portable electronics and wireless systems. This positive progress has come at the expense of significant electromagnetic interference (EMI) pollution, which requires the development of highly efficient shielding materials with low EM reflection. The manipulation of MXene surface functional groups and, subsequently, incorporation into engineered polymer matrices provide mechanisms to improve the electromechanical performance of conductive polymer composites (CPCs) and create a safe EM environment. Herein, Ti3C2Tx MXene nanoflakes were first synthesized and then, taking advantage of their abundant surface functional groups, polyaniline (PA) nanofibers were grafted onto the MXene surface via oxidant-free oxidative polymerization at two different MXene to monomer ratios. The electrical conductivity, EMI shielding effectiveness (SE), and mechanical properties of poly (vinylidene fluoride) (PVDF)-based CPCs at different nanomaterial loadings were then thoroughly investigated. A very low percolation threshold of 1.8 vol % and outstanding electrical conductivities of 0.23, 0.195, and 0.17 S/cm were obtained at 6.9 vol % loading for PVDF-MXene, PVDF-MX2AN1, and PVDF-MX1AN1, respectively. Compared to the pristine MXene composite, surface modification significantly enhanced the EMI SE of the PVDF-MX2AN1 and PVDF-MX1AN1 composites by 19.6 and 32.7%, respectively. The remarkable EMI SE enhancement of the modified nanoflakes was attributed to (i) the intercalation of PA nanofibers between MXene layers, resulting in better nanoflake exfoliation, (ii) a large amount of dipole and interfacial polarization dissipation by constructing capacitor-like structures between nanoflakes and polymer chains, and (iii) augmented EMI attenuation via conducting PA nanofibers. The surface modification of the MXene nanoflakes also enhanced the interfacial interactions between PVDF chains and nanoflakes, which resulted in an improved Young's modulus of the PVDF matrix by about 67 and 46% at 6.9 vol % loading for PVDF-MX2AN1 and PVDF-MX1AN1 composites, respectively.

Thin Film Polyamide Nanocomposite Membrane Decorated by Polyphenol-Assisted Ti3C2Tx MXene Nanosheets for Reverse Osmosis.

Transition-metal carbides (MXenes), multifunctional 2D materials, have caught the interest of researchers in the fabrication of high-performance nanocomposite membranes. However, several issues regarding MXenes still remain unresolved, including low ambient stability; facile restacking and agglomeration; and poor compatibility and processability. To address the aforementioned challenges, we proposed a facile, green, and cost-efficient approach for coating a stable layer of plant-derived polyphenol tannic acid (TA) on the surface of MXene (Ti3C2Tx) nanosheets. Then, high-performance reverse osmosis polyamide thin film nanocomposite (RO-PA-TFN) membranes were fabricated by the incorporation of modified MXene (Ti3C2Tx-TA) nanosheets in the polyamide selective layer through interfacial polymerization. The strong negative charge and hydrophilic multifunctional properties of TA not only boosted the chemical compatibility between Ti3C2Tx MXene nanosheets and the polyamide matrix to overcome the formation of nonselective voids but also generated a tight network with selective interfacial pathways for efficient monovalent salt rejection and water permeation. In comparison to the neat thin film composite membrane, the optimum TFN (Ti3C2Tx-TA) membrane with a loading of 0.008 wt % nanofiller revealed a 1.4-fold enhancement in water permeability, a well-maintained high NaCl rejection rate of 96% in a dead-end process, and enhanced anti-fouling tendency. This research offers a facile way for the development of modified MXene nanosheets to be successfully integrated into the polyamide-selective layer to improve the performance and fouling resistance of TFN membranes.