RESUMEN
The bioconcentration factor (BCF) is an important parameter that gives information regarding the ability of a contaminant to be taken up by organisms from the water. Per- and polyfluoroalkyl substances (PFAS) are widespread in the environment, causing concern regarding their impact on human health. Due to the lack of available bioaccumulation data for most compounds in the PFAS group, we developed a quantitative structure-property relationship (QSPR) model to predict the log BCF for fish (taxonomic class Teleostei), based on experimental data available for the most studied 33 representatives of this group of compounds. Furthermore, we implemented the developed model to predict log BCF for an external dataset of 2,209 PFAS. Consequently, 1,045 PFAS were found not to be bioaccumulative, 208 were classified as bioaccumulative, and 956 were predicted to be very bioaccumulative. Finally, we obtained the high correlation (R2=0.844) between the log BCFs obtained in laboratory and field studies for 13 PFAS. In silico analyses indicate that PFAS bioconcentration depends on the size (chain length - number of CF2 groups in alkyl tail/chain) of a molecule, as well as on the atomic distribution properties. In general, long-chain PFAS - above 8 and 6 carbon atoms for perfluorinated carboxylic acids (PFCAs)and perfluorinated sulfonic acids (PFSAs), respectively - tend to bioconcentrate more compared to the short-chain ones. In conclusion, predicting BCF on fish is possible for a wide range of fluorinated compounds, which can be further used for estimating PFAS behavior in the environment.
RESUMEN
Bisphenol A alternatives are manufactured as potentially less harmful substitutes of bisphenol A (BPA) that offer similar functionality. These alternatives are already in the market, entering the environment and thus raising ecological concerns. However, it can be expected that levels of BPA alternatives will dominate in the future, they are limited information on their environmental safety. The EU PARC project highlights BPA alternatives as priority chemicals and consolidates information on BPA alternatives, with a focus on environmental relevance and on the identification of the research gaps. The review highlighted aspects and future perspectives. In brief, an extension of environmental monitoring is crucial, extending it to cover BPA alternatives to track their levels and facilitate the timely implementation of mitigation measures. The biological activity has been studied for BPA alternatives, but in a non-systematic way and prioritized a limited number of chemicals. For several BPA alternatives, the data has already provided substantial evidence regarding their potential harm to the environment. We stress the importance of conducting more comprehensive assessments that go beyond the traditional reproductive studies and focus on overlooked relevant endpoints. Future research should also consider mixture effects, realistic environmental concentrations, and the long-term consequences on biota and ecosystems.
Asunto(s)
Compuestos de Bencidrilo , Monitoreo del Ambiente , Contaminantes Ambientales , Fenoles , Fenoles/toxicidad , Compuestos de Bencidrilo/toxicidad , Contaminantes Ambientales/toxicidad , Monitoreo del Ambiente/métodos , Animales , Humanos , Disruptores Endocrinos/toxicidadRESUMEN
Water pollution has become a critical global concern requiring effective monitoring techniques and robust protection strategies. Contaminants of emerging concern (CECs) are increasingly detected in various water sources, with their harmful effects on humans and ecosystems continually evolving. Based on literature reports highlighting the promising sorption properties of metal-organic frameworks (MOFs), the aim of this study was to evaluate the suitability of NH2-MIL-125 (Ti) and UiO-66 (Ce) as sorbents in passive sampling devices (MOFs-PSDs) for the collection and extraction of a wide group of CECs. Solvothermal methods were used to synthesize MOFs, and the characterization of the obtained materials was performed using field-emission scanning electron microscopy (FE-SEM), powder X-ray diffractometry (pXRD) and Fourier-transform infrared (FTIR) spectroscopy. The research demonstrated the sorption capabilities of the tested MOFs, the ease and rapidity of their chemical regeneration and the possibility of reuse as sorbents. Using chemometric analysis, the structural properties of CECs determining the sorption efficiency on the surface of NH2-MIL-125 (Ti) were identified. The MOFs-PSDs were lab-calibrated to examine the kinetics of analytes sorption and determine the sampling rates (Rs). MOFs-PSDs and CNTs-PSDs (PSDs containing carbon nanotubes as a sorbent) were then placed in the Elblag River and the Vistula Lagoon to sampling and extraction of the target compounds from the water. CNTs-PSDs were selected, based on our previous research, for the comparison of the effectiveness of the MOFs-PSDs in environmental monitoring. MOFs-PSDs were successfully used in monitoring of CECs in water. The time-weighted average concentrations (CTWA) of 2-hydroxycarbamazepine, carbamazepine-10,11-epoxide, p-nitrophenol, 3,5-dichlorophenol and caffeine were determined in the Elblag River and CTWA of metoprolol, diclofenac, 2-hydroxycarbamazepine, carbamazepine-10,11-epoxide, p-nitrophenol, 3,5-dichlorophenol and caffeine were determine in the Vistula Lagoon using MOFs-PSDs and a high-performance liquid chromatography coupled with triple quadrupole mass spectrometer.
RESUMEN
Viruses are a group of widespread organisms that are often responsible for very dangerous diseases, as most of them follow a mechanism to multiply and infect their hosts as quickly as possible. Pathogen viruses also mutate regularly, with the result that measures to prevent virus transmission and recover from the disease caused are often limited. The development of new substances is very time-consuming and highly budgeted and requires the sacrifice of many living organisms. Computational chemistry methods allow faster analysis at a much lower cost and, most importantly, reduce the number of living organisms sacrificed experimentally to a minimum. Ionic liquids (ILs) are a group of chemical compounds that could potentially find a wide range of applications due to their potential virucidal activity. In our study, we conducted a complex computational analysis to predict the antiviral activity of ionic liquids against three surrogate viruses: two nonenveloped viruses, Listeria monocytogenes phage P100 and Escherichia coli phage MS2, and one enveloped virus, Pseudomonas syringae phage Phi6. Based on experimental data of toxic activity (logEC90), we assigned activity classes to 154 ILs. Prediction models were created and validated according to the Organization for Economic Co-operation and Development (OECD) recommendations using the Classification Tree method. Further, we performed an external validation of our models through virtual screening on a set of 1277 theoretically generated ionic liquids and then selected 10 active ionic liquids, which were synthesized to verify their activity against the analyzed viruses. Our study proved the effectiveness and efficiency of computational methods to predict the antiviral activity of ionic liquids. Thus, computational models are a cost-effective alternative approach compared with time-consuming experimental studies where live animals are involved.
Asunto(s)
Líquidos Iónicos , Animales , Líquidos Iónicos/farmacología , Líquidos Iónicos/química , Aprendizaje Automático , Antivirales/farmacologíaRESUMEN
This work aimed to verify whether it is possible to extend the applicability domain (AD) of existing QSPR (Quantitative Structure-Property Relationship) models by employing a strategy involving additional quantum-chemical calculations. We selected two published QSPR models: for water solubility, logSW, and vapor pressure, logVP of PFAS as case studies. We aimed to enlarge set of compounds used to build the model by applying factorial planning to plan the augmentation of the set of these compounds based on their structural features (descriptors). Next, we used the COSMO-RS model to calculate the logSW and logVP for selected chemicals. This allowed filling gaps in the experimental data for further training QSPR models. We improved the published models by significantly extending number of compounds for which theoretical predictions are reliable (i.e., extending the AD). Additionally, we performed external validation that had not been carried out in original models. To test effectiveness of the AD extension, we screened 4519 PFAS from NORMAN Database. The number of compounds outside the domain was reduced comparing the original model for both properties. Our work shows that combining physics-based methods with data-driven models can significantly improve the performance of predictions of phys-chem properties relevant for the chemical risk assessment.