Omics-based pharmacological evaluation reveals Yuanhu Zhitong oral liquid ameliorates arthritis by regulating PKC/ERK/NF-κB signaling pathway.

ETHNOPHARMACOLOGICAL RELEVANCE: Successful use of herbal medicine in the treatment of rheumatoid arthritis (RA) creates opportunities for alternative therapies. Yuanhu Zhitong oral liquid (YZOL) is an herbal preparation known for its potent analgesic and anti-inflammatory properties in traditional use. However, the pharmacological mechanism of YZOL for treating RA remains unclear. AIM OF THE STUDY: The aim of this study was to evaluate the efficacy of YZOL in the treatment of RA and to explore its potential mechanisms through omics analysis. MATERIALS AND METHODS: Type II collagen was used to induce an arthritis rat model. The effects of YZOL on paw swelling, inflammatory cytokines, oxidative stress, and histopathological changes were systematically investigated. A pathway-driven transcriptomic analysis was performed to identify key signaling pathways associated with YZOL therapy. The key alterations were validated by qRT-PCR, Western blot, and immunohistochemistry assays. RESULTS: YZOL significantly attenuated arthritis progression, reduced paw swelling rate, and lowered arthritis score in CIA rats. YZOL also inhibited systemic inflammation and associated oxidative stress during RA. Transcriptomic analysis identified 341 genes with significantly altered expression following YZOL treatment. These genes were enriched in inflammation-related pathways, particularly in the NF-κB and MAPK signaling pathways. In addition, we discovered that YZOL can alleviate inflammation in the local synovial tissue. The effect of YZOL was confirmed by the suppression of PKC/ERK/NF-κB p65 signaling at systemic and local levels. CONCLUSIONS: This study provides novel evidence that YZOL treatment ameliorates RA by suppressing the PKC/ERK/NF-κB pathway, suggesting its potential as an alternative therapy for RA.

An Operating Stiffness Controller for the Medical Continuum Robot Based on Impedance Control.

Continuum manipulators can conform to curvilinear paths and manipulate objects in complex environments, which makes it emerging to be applied in minimally invasive surgery (MIS). However, different and controllable operating stiffness of the continuum manipulator is required during different stages of surgery to achieve safe access or stable and precise operation. This work proposes an operating stiffness controller (OSC) for the typical tendon-driven continuum manipulator based on the variable impedance control method with Lagrangian dynamic modeling. This controller can adjust the operating stiffness by modifying the driving forces along the driving tendons of the continuum manipulator without changing its material or structure. The proposed OSC converts the damping and stiffness matrices of the impedance control into variable parameters. This merit allows it to dynamically adjust the operating stiffness of the continuum manipulator according to the desired constant or time-varying stiffness. Furthermore, the OSC stability can be proven based on a Lyapunov function, and its stiffness control performances have been analyzed and evaluated in both simulations and experiments. The OSC controller generated average relevant error values of 7.82% and 3.09% for the operating stiffness control experiments with constant and time-varying desired stiffness, respectively. These experimental results indicate that the OSC has high accuracy, stability, and strong robustness in the operating stiffness control tasks.

Boosting External Quantum Efficiency to 12.0% of an Ultraviolet OLED by Engineering the Horizontal Dipole Orientation of a Hot Exciton Emitter.

Currently, much research effort has been devoted to improving the exciton utilization efficiency and narrowing the emission spectra of ultraviolet (UV) fluorophores for organic light-emitting diode (OLED) applications, while almost no attention has been paid to optimizing their light out-coupling efficiency. Here, we developed a linear donor-acceptor-donor (D-A-D) triad, namely CDFDB, which possesses high-lying reverse intersystem crossing (hRISC) property. Thanks to its integrated narrowband UV photoluminescence (PL) (λPL: 397 nm; FWHM: 48 nm), moderate PL quantum yield (φPL: 72%, Tol), good triplet hot exciton (HE) conversion capability, and large horizontal dipole ratio (Θ//: 92%), the OLEDs based on CDFDB not only can emit UV electroluminescence with relatively good color purity (λEL: 398 nm; CIEx,y: 0.161, 0.040), but also show a record maximum external quantum efficiency (EQEmax) of 12.0%. This study highlights the important role of horizontal dipole orientation engineering in the molecular design of HE UV-OLED fluorophores.

Detection of ion cyclotron emission by using an ion cyclotron range of frequency antennas-based diagnostic system in experimental advanced superconducting tokamak.

In the experimental advanced superconducting tokamak (EAST), a novel ion cyclotron range of frequency (ICRF) antenna-based diagnostic system is designed to measure ion cyclotron emission (ICE) driven by high-energy ions. The diagnostic system includes ICRF antenna straps, a three-tune impedance matching system, a coaxial switching system, a direct current block, and a data acquisition and storage system. Using the coaxial switching system, the ICRF antenna can be switched from the heating mode to the coupling mode between two discharges. In the 2023 EAST experiment campaign, core ICE was observed using the ICRF antenna-based diagnostic system during neutron beam injection heating, and the obtained results agreed well with the signal detected by the previous high-frequency B-dot probe-based diagnostic system.

Imageable Brachytherapy with Chelator-Free Radiolabeling Hydrogel.

Brachytherapy stands as an essential clinical approach for combating locally advanced tumors. Here, an injectable brachytherapy hydrogel is developed for the treatment of both local and metastatic tumor. Fe-tannins nanoparticles are efficiently and stably radiolabeled with clinical used therapeutic radionuclides (such as 131I, 90Y, 177Lu and 225Ac) without a chelator, and then chemically cross-linked with 4-ArmPEG-SH to form brachytherapy hydrogel. Upon intratumoral administration, magnetic resonance imaging (MRI) signal from ferric ions embedded within the hydrogel directly correlates with the retention dosage of radionuclides, which can real-time monitor radionuclides emitting short-range rays in vivo without penetration limitation during brachytherapy. The hydrogel's design ensures the long-term tumor retention of therapeutic radionuclides, leading to the effective eradication of local tumor. Furthermore, the radiolabeled hydrogel is integrated with an adjuvant to synergize with immune checkpoint blocking therapy, thereby activating potent anti-tumor immune responses and inhibiting metastatic tumor growth. Therefore, this work presents an imageable brachytherapy hydrogel for real-time monitoring therapeutic process, and expands the indications of brachytherapy from treatment of localized tumors to metastatic tumors. This article is protected by copyright. All rights reserved.

Endoscopic closure of large gastric defects with a novel through-the-scope closing device in a porcine model (with videos).

BACKGROUND AND AIM: After endoscopic full-thickness resection (EFTR), defects require a reliable and sustained closure. We present a novel, through-the-scope "bow-tie" (TTS-BT) closing device enabling direct defect closure without scope withdrawal. This preclinical study aimed to evaluate the feasibility and safety of this device for large defect closure after EFTR in a porcine model. METHODS: Exposed EFTR was performed for virtual lesions > 2 cm in the stomach of twelve pigs. Subsequently, TTS-BT closing devices were used for defect closure. Conventional metal clips were used to close any remaining defects. Gastroscopy was performed for 8 weeks to examine the wound sites and the pigs were subsequently sacrificed. After sacrificing the pigs, the wound healing was histologically verified by hematoxylin-eosin (HE) staining. The primary outcome was a successful closure rate, while the secondary outcomes were complete healing rate, closure time, and incidence of adverse events. RESULTS: The median long and short diameters of perforations were 4.0 (3.0-6.0) cm and 3.0 (2.0-4.0) cm, respectively. Defect closure using novel TTS-BT closure devices and conventional metal clips was successfully performed in all pigs. Complete healing was achieved in the defects of 12 pigs. The median closure time was 13 (9-38) minutes. No serious adverse events occurred during the 8-week follow-up. CONCLUSIONS: The novel TTS-BT closure device is feasible and safe for closing large gastric perforations and could be a promising tool for clinical practice.

Near-unity quantum yield and long-term emission stability in halide perovskite nanocrystal glass composite.

Metal halide perovskites are promising optoelectronic materials due to their outstanding luminescent properties. However, the instability of perovskites has long been the bottleneck to their practical applications. Here Cs4PbBr6 nanocrystals based glass composite (Cs4PbBr6 NCs@glass) are successfully prepared, which displays green emission color (520 nm), narrow bandwidth (23 nm) and a near-unity photoluminescence quantum yield (PLQY). The H2O molecules permeating in the lattice of Cs4PbBr6 were found to be a crucial role in the subband energy emission. The Cs4PbBr6 NCs@glass has excellent emission stability; maintains 93 % of initial PL intensity after ultraviolet light irradiation for over 5000 h. In addition, by adjusting the halogen content, we have achieved tunable emission color from blue (450 nm) to green (520 nm) and red (670 nm) on Cs4PbX6 NCs@glass (X = Cl, Br, I), which covers up to 127 % of the National Television Systems Board (NTSC) standard system. Our finding indicates the commercial applications of perovskite materials in lighting and display.

Accelerated Activity-Based Sensing by Fluorogenic Reporter Engineering Enables to Rapidly Determine Unstable Analyte.

Accurate detection of labile analytes through activity based fluorogenic sensing is meaningful but remains a challenge because of nonrapid reaction kinetic. Herein, we present a signaling reporter engineering strategy to accelerate azoreduction reaction by positively charged fluorophore promoted unstable anion recognition for rapidly sensing sodium dithionite (Na2S2O4), a kind of widespread used but harmful inorganic reducing agent. Its quick decomposition often impedes application reliability of traditional fluorogenic probes in real samples because of their slow responses. In this work, four azo-based probes with different charged fluorophores (positive, zwitterionic, neutral, and negative) were synthesized and compared. Among of them, with sequestration effect of positively charged anthocyanin fluorophore for dithionite anion via electrostatic attraction, the cationic probe Azo-Pos displayed ultrafast fluorogenic response (∼2 s) with the fastest response kinetic (kpos' = 0.373 s-1) that is better than other charged ones (kzwi' = 0.031 s-1, kneu' = 0.013 s-1, kneg' = 0.003 s-1). Azo-Pos was demonstrated to be capable to directly detect labile Na2S2O4 in food samples and visualize the presence of Na2S2O4 in living systems in a timely fashion. This new probe has potential as a robust tool to fluorescently monitor excessive food additives and biological invasion of harmful Na2S2O4. Moreover, our proposed accelerating strategy would be versatile to develop more activity-based sensing probes for quickly detecting other unstable analytes of interest.

Polystyrene nanoplastics exacerbate aflatoxin B1-induced hepatic injuries by modulating the gut-liver axis.

Dietary pollution of Aflatoxin B1 (AFB1) poses a great threat to global food safety, which can result in serious hepatic injuries. Following the widespread use of plastic tableware, co-exposure to microplastics and AFB1 has dramatically increased. However, whether microplastics could exert synergistic effects with AFB1 and amplify its hepatotoxicity, and the underlying mechanisms are still unelucidated. Here, mice were orally exposed to 100 nm polystyrene nanoplastics (NPs) and AFB1 to investigate the influences of NPs on AFB1-induced hepatic injuries. We found that exposure to only NPs or AFB1 resulted in colonic inflammation and the impairment of the intestinal barrier, which was exacerbated by combined exposure to NPs and AFB1. Meanwhile, co-exposure to NPs exacerbated AFB1-induced dysbiosis of gut microbiota and remodeling of the fecal metabolome. Moreover, NPs and AFB1 co-exposure exhibited higher levels of systemic inflammatory factors compared to AFB1 exposure. Additionally, NPs co-exposure further exacerbated AFB1-induced hepatic fibrosis and inflammation, which could be associated with the overactivation of the TLR4/MyD88/NF-κB pathway. Notably, Spearman's correlation analysis revealed that the exacerbation of NPs co-exposure was closely associated with microbial dysbiosis. Furthermore, microbiota from NPs-exposed mice (NPsFMT) partly reproduced the exacerbation of NPs on AFB1-induced systemic and hepatic inflammation, but not fibrosis. In summary, our findings indicate that gut microbiota could be involved in the exacerbation of NPs on AFB1-induced hepatic injuries, highlighting the health risks of NPs.

Penifuranone A: A Novel Alkaloid from the Mangrove Endophytic Fungus Penicillium crustosum SCNU-F0006.

One previously undescribed alkaloid, named penifuranone A (1), and three known compounds (2-4) were isolated from the mangrove endophytic fungus Penicillium crustosum SCNU-F0006. The structure of the new alkaloid (1) was elucidated based on extensive spectroscopic data analysis and single-crystal X-ray diffraction analysis. Four natural isolates and one new synthetic derivative of penifuranone A, compound 1a, were screened for their antimicrobial, antioxidant, and anti-inflammatory activities. Bioassays revealed that penifuranone A (1) exhibited strong anti-inflammatory activity in vitro by inhibiting nitric oxide (NO) production in lipopolysaccharide-activated RAW264.7 cells with an IC50 value of 42.2 µM. The docking study revealed that compound 1 exhibited an ideal fit within the active site of the murine inducible nitric oxide synthase (iNOS), establishing characteristic hydrogen bonds.

Complete genome sequencing of Hortaea werneckii M-3 for identifying polyester polyurethane degrading enzymes.

Hortaea werneckii M-3, a black yeast isolated from the marine sediment of the West Pacific, can utilize polyester polyurethane (PU, Impranil DLN) as a sole carbon source. Here, we present the complete genome of Hortaea werneckii M-3 with the focus on PU degradation enzymes. The total genome size is 38,167,921 bp, consisting of 186 contigs with a N50 length of 651,266 bp and a GC content of 53.06%. Genome annotation analysis predicts a total of 13,462 coding genes, which include 99 tRNAs and 105 rRNAs. Some genes encoding PU degrading enzymes including cutinase and urease are identified in this genome. The genome analysis of Hortaea werneckii M-3 will be helpful for further understanding the degradation mechanism of polyester PU by marine yeasts.

Oldest old's travel mode choice and new mobility technology acceptance: case in America and China.

Introduction: The oldest olds (aged 85 and over) are the fastest-growing age segment. However, our understanding of their mobility is limited. To address this gap, we invited 19 U.S. and 30 Chinese "oldest old" to take part in focus groups and complete a mobility questionnaire. We focus on travel mode choice, which includes changes in travel modes, frequency of usage, and perceptions of comfort. Methods: Older adults' familiarity and acceptance of new mobility technologies (e.g., ridesharing, carsharing, and autonomous vehicles) were measured by questionnaire and focus group. Word clouds were also used to illustrate people's reasons for choosing their primary mode of transportation. Results and discussion: The results show that both panels of older adults similarly feel some extent of travel limitations. But the responses among the two groups differ: 18 American participants chose "drive myself" as their primary option a decade ago, while 11 chose it now; no Chinese participants selected it either a decade ago or now. Both currently and 10 years ago, there was a significant difference in mode choice between participants in China and the United States. However, this gap has narrowed over the past decade. Participants in China have significantly changed their transportation preferences compared to 10 years ago, while participants in the US have remained nearly unchanged. American respondents consider "ease" as an important factor, while Chinese respondents pay more attention to "safety" and "no other option to get around" when making travel mode choices. Compared to Chinese participants, American participants were more comfortable with driving an autonomous vehicle. These differences may result from the various developmental stages and transportation policies of the two countries. This study supports the development of new mobility technologies for the oldest old to improve their quality of life.

Axial heteroatom (P, S and Cl)-decorated Fe single-atom catalyst for the oxygen reduction reaction: a DFT study.

An FeN4 single-atom catalyst (SAC) embedded in a graphene matrix is considered an oxygen reduction reaction (ORR) catalyst for its good activity and durability, and decoration on the Fe active site can further modulate the performance of the FeN4 SAC. In this work, the axial heteroatom (L = P, S and Cl)-decorated FeN4 SAC (FeN4L) and pure FeN4 were comparatively studied using density functional theory (DFT) calculations. It was found that the rate-determining step (RDS) in the ORR on pure FeN4 is the reduction of OH to H2O in the last step with an overpotential of 0.58 V. However, the RDS of the ORR for the axial heteroatom-decorated FeN4L is the reduction of O2 to OOH in the first step. The axial P and S heteroatom-decorated FeN4P and FeN4S exhibit lower activity than pure FeN4 since the overpotentials of the ORR on FeN4P and FeN4S are 1.02 V and 1.09 V, respectively. Meanwhile, FeN4Cl exhibits the best activity towards the ORR since it possesses the lowest overpotential (0.51 V). The main reason is that the axial heteroatom decoration alleviates the adsorption of all the species in the whole ORR, thus modulating the free energy in every elementary reaction step. A volcano relationship between the d band center and the ORR activity can be determined among the axial heteroatom-decorated FeN4L SACs. The d band center of the Fe atom in various FeN4L SACs follows the order of FeN4 > FeN4Cl > FeN4S > FeN4P, whereas the overpotential of the ORR on various catalysts follows the order of FeN4Cl > FeN4 > FeN4S ≈ FeN4P. ΔG(*OH) is a simple descriptor for the prediction of the ORR activity of various axial heteroatom-decorated FeN4L, although the RDS in the ORR is either the first step or the last step. This paper provides a guide to the design and selection of the ORR over SACs with different axial heteroatom decorations, contributing to the rational design of more powerful ORR electrocatalysts and achieving advances in electrochemical conversion and storage devices.

Imaging Thermally Fluctuating Néel Vectors in van der Waals Antiferromagnet NiPS3.

Studying antiferromagnetic domains is essential for fundamental physics and potential spintronics applications. Despite their importance, few systematic studies have been performed on antiferromagnet (AFM) domains with high spatial resolution in van der Waals (vdW) materials, and direct probing of the Néel vectors remains challenging. In this work, we found multidomain states in the vdW AFM NiPS3, a material extensively investigated for its unique magnetic exciton. We employed photoemission electron microscopy combined with the X-ray magnetic linear dichroism (XMLD-PEEM) to image the NiPS3's magnetic structure. The nanometer-spatial resolution of XMLD-PEEM allows us to determine local Néel vector orientations and discover thermally fluctuating Néel vectors that are independent of the crystal symmetry even at 65 K, well below the TN of 155 K. We demonstrate that an in-plane orbital moment of the Ni ion is responsible for the weak magnetocrystalline anisotropy. The observed thermal fluctuations of the antiferromagnetic domains may explain the broadening of magnetic exciton peaks at higher temperatures.

Gut Microbiome-Serum Metabolism Revealed the Allergenicity of Ferulic Acid Combined with Glucose-Modified ß-Lactoglobulin.

A novel strategy combining ferulic acid and glucose was proposed to reduce ß-lactoglobulin (BLG) allergenicity and investigate whether the reduction in allergenicity was associated with gut microbiome and serum metabolism. As a result, the multistructure of BLG changed, and the modified BLG decreased significantly the contents of IgE, IgG, IgG1, and mMCP-1 in serum, improved the diversity and structural composition of gut microbiota, and increased the content of short-chain fatty acids (SCFAs) in allergic mice. Meanwhile, allergic mice induced by BLG affected arachidonic acid, tryptophan, and other metabolic pathways in serum, the modified BLG inhibited the production of metabolites in arachidonic acid metabolism pathway and significantly increased tryptophan metabolites, and this contribution helps in reducing BLG allergenicity. Overall, reduced allergenicity of BLG after ferulic acid was combined with glucose modification by regulating gut microbiota, the metabolic pathways of arachidonic acid and tryptophan. The results may offer new thoughts alleviating the allergy risk of allergenic proteins.

Improving Thermal Stability of High-Efficiency Methylammonium-Free Perovskite Solar Cells via Chloride Additive Engineering.

Tin dioxide (SnO2), in perovskite solar cells (PSCs), stands out as the material most suited to the electron transport layer (ETL), yielding advantages with regard to ease of preparation, high mobility, and favorable energy level alignment. Nonetheless, there is a chance that energy losses from defects in the SnO2 and interface will result in a reduction in the Voc. Consequently, optimizing the interfaces within solar cell devices is a key to augmenting both the efficiency and the stability of PSCs. Herein this present study, we introduced butylammonium chloride (BACl) into the SnO2 ETL. The resulting optimized SnO2 film mitigated interface defect density, thereby improving charge extraction. The robust bonding capability of negatively charged Cl- ions facilitated their binding with noncoordinated Sn4+ ions, effectively passivating defects associated with oxygen vacancies and enhancing charge transport within the SnO2 ETL. Concurrently, doped BA+ and Cl- diffused into the perovskite lattice, fostering perovskite grain growth and reducing the defects in perovskite. In comparison to the control device, the Voc saw a 70 mV increase, achieving a champion efficiency of 22.86%. Additionally, following 1000 h of ambient storage, the unencapsulated device based on SnO2 preburied with BACl retained around 90% of its initial photovoltaic conversion efficiency.

Nitrogen migration and transformation during re-suspension and photo-induction in landscape water replenished by reclaimed water.

Sediment re-suspension plays a crucial role in releasing endogenous nitrogen and greenhouse gases in shallow urban waters. However, the impacts of repeated re-suspension and photo-induced processes on migration and transformation from endogenous nitrogen, as well as the emission of greenhouse gases, remain unclear. This study simulated three conditions: re-suspension (Rs), re-suspension combined with ultravioletirradiation (Rs + UV), and ultraviolet irradiation (UV). The findings revealed that both repeated sediment re-suspension and exposure to UV light altered the characteristics of surface sediments. Decrease of convertible nitrogen in sediments, leading to the release of ion-exchangeable nitrogen (IEF-N) into NH4+-N and NO3--N, influenced greenhouse gas production differently under various conditions. The study observed the highest concentration of dissolved N2O in under UV irradiation, positively correlated with NO2--N and NO3--N. Re-suspension increased the turbidity of the overlying water and accelerated nitrification, resulting in the highest NO3--N concentration and the lowest dissolved N2O concentration. Additionally, in the Rs + UV dissolved N2O maintained the higher concentrations than in Rs, with greatest amount of N conversion in surface sediments, and a 59.45% reduction in IEF-N. The production of N2O during re-suspension was mainly positively correlated with NH4+-N in the overlying water. Therefore, this study suggest that repeated re-suspension and light exposure significantly influence nitrogen migration and transformation processes in sediment, providing a theoretical explanation for the eutrophication of water and greenhouse gas emissions.

3D Conjugated Hole Transporting Materials for Efficient and Stable Perovskite Solar Cells and Modules.

The orthogonal structure of the widely used hole transporting material (HTM) 2,2',7,7'-tetrakis(N, N-di-p-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD) imparts isotropic conductivity and excellent film-forming capability. However, inherently weak intra- and inter-molecular π-π interactions result in low intrinsic hole mobility. Herein, a novel HTM, termed FTPE-ST, with a twist conjugated dibenzo(g,p)chrysene core and coplanar 3,4-ethylenedioxythiophene (EDOT) as extended donor units, is designed to enhance π-π interactions, without compromising on solubility. The three-dimensional (3D) configuration provides the material multi-direction charge transport as well as excellent solubility even in 2-methylanisole, and its large conjugated backbone endows the HTM with a high hole mobility. Moreover, the sulfur donors in EDOT units coordinate with lead ions on the perovskite surface, leading to stronger interfacial interactions and the suppression of defects at the perovskite/HTM interface. As a result, perovskite solar cells (PSCs) employing FTPE-ST achieve a champion power conversion efficiency (PCE) of 25.21% with excellent long-time stability, one of the highest PCEs for non-spiro HTMs in n-i-p PSCs. In addition, the excellent film-forming capacity of the HTM enables the fabrication of FTPE-ST-based large-scale PSCs (1.0 cm2) and modules (29.0 cm2), which achieve PCEs of 24.21% (certificated 24.17%) and 21.27%, respectively.

Precision miRNA profiling: Electrochemiluminescence powered by CRISPR-Cas13a and hybridization chain reaction.

The article details a groundbreaking platform for detecting microRNAs (miRNAs), crucial biomolecules involved in gene regulation and linked to various diseases. This innovative platform combines the CRISPR-Cas13a system's precise ability to specifically target and cleave RNA molecules with the amplification capabilities of the hybridization chain reaction (HCR). HCR aids in signal enhancement by creating branched DNA structures. Additionally, the platform employs electrochemiluminescence (ECL) for detection, noted for its high sensitivity and low background noise, making it particularly effective. A key application of this technology is in the detection of miR-17, a biomarker associated with multiple cancer types. It exhibits remarkable detection capabilities, characterized by low detection limits (14.38 aM) and high specificity. Furthermore, the platform's ability to distinguish between similar miRNA sequences and accurately quantify miR-17 in cell lysates underscores its significant potential in clinical and biomedical fields. This combination of precise targeting, signal amplification, and sensitive detection positions the platform as a powerful tool for miRNA analysis in medical diagnostics and research.

Phytic Acid-Promoted Deposition of Gold Nanoparticles with Grafted Cationic Polymer Brushes for the Construction of Synergistic Contact-Killing and Photothermal Bactericidal Coatings.

Medical implants are constantly facing the risk of bacterial infections, especially infections caused by multidrug resistant bacteria. To mitigate this problem, gold nanoparticles with alkyl bromide moieties (Au NPs-Br) on the surfaces were prepared. Xenon light irradiation triggered the plasmon effect of Au NPs-Br to induce free radical graft polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), leading to the formation of poly(DMAEMA) brush-grafted Au NPs (Au NPs-g-PDM). The Au NPs-g-PDM nanocomposites were conjugated with phytic acid (PA) via electrostatic interaction and van der Waals interaction. The as-formed aggregates were deposited on the titanium (Ti) substrates to form the PA/Au NPs-g-PDM (PAP) hybrid coatings through surface adherence of PA and the gravitational effect. Synergistic bactericidal effects of contact-killing caused by the cationic PDM brushes, and local heating generated by the Au NPs under near-infrared irradiation, conferred strong antibacterial effects on the PAP-deposited Ti (Ti-PAP) substrates. The synergistic bactericidal effects reduced the threshold temperature required for the photothermal sterilization, which in turn minimized the secondary damage to the implant site. The Ti-PAP substrates exhibited 97.34% and 99.97% antibacterial and antiadhesive efficacy, respectively, against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), compared to the control under in vitro antimicrobial assays. Furthermore, the as-constructed Ti-PAP surface exhibited a 99.42% reduction in the inoculated S. aureus under in vivo assays. In addition, the PAP coatings exhibited good biocompatibility in the hemolysis and cytotoxicity assays as well as in the subcutaneous implantation of rats.