Composite Foams of the Graphitic Carbon Nitride@Carbon Nanofibrils Conferred a Superamphiphilic Property and Reinforced Thermal Stability.

Herein, we demonstrated the preparation of novel three-dimensional (3D) superamphiphilic g-C3N4@carbon nanofibers foam (g-C3N4@CNFs) via a two-step approach: liquid nitrogen treatment-freeze-drying; the foams possessed good thermal stability. In this approach, melamine acted as a nitrogen source, and nanofibrillated cellulose (NFCs) functioned as a 3D skeleton. The thermal stability of the as-prepared g-C3N4@CNFs-3 foam was much higher than that of g-C3N4@CNFs-1, as indicated by thermogravimetric data, including an increase of the onset weight loss point (Tonset) by 238.6 °C and an improvement of the maximal weight loss rate (Tmax) by 258.8 °C. The combination of g-C3N4 with CNFs conferred a reduction in the heat release rate (ca. -86%) and the total heat release (ca. -75%). Furthermore, the composition of the hydrophilically oxygenated functional groups and hydrophobic triazine domains in g-C3N4@CNFs rendered it a unique amphiphilic property (contact angle close to 0° within 1.0 s for water and 0° within 12 ms for hexane). A high storage capacity for water and various organic solvents of the superamphiphilic g-C3N4@CNFs foam was found, up to 40-50 times its original weight. The discovery of these superamphiphilic foams is of great significance for the development of superwetting materials and may find their applications in oil emulsion purification and catalyst support fields.

CRF07_BC is associated with slow HIV disease progression in Chinese patients.

HIV subtypes convey important epidemiological information and possibly influence the rate of disease progression. In this study, HIV disease progression in patients infected with CRF01_AE, CRF07_BC, and subtype B was compared in the largest HIV molecular epidemiology study ever done in China. A national data set of HIV pol sequences was assembled by pooling sequences from public databases and the Beijing HIV laboratory network. Logistic regression was used to assess factors associated with the risk of AIDS at diagnosis ([AIDSAD], defined as a CD4 count < 200 cells/µL) in patients with HIV subtype B, CRF01_AE, and CRF07_BC. Of the 20,663 sequences, 9,156 (44.3%) were CRF01_AE. CRF07_BC was responsible for 28.3% of infections, followed by B (13.9%). In multivariable analysis, the risk of AIDSAD differed significantly according to HIV subtype (OR for CRF07_BC vs. B: 0.46, 95% CI 0.39─0.53), age (OR for ≥ 65 years vs. < 18 years: 4.3 95% CI 1.81─11.8), and transmission risk groups (OR for men who have sex with men vs. heterosexuals: 0.67 95% CI 0.6─0.75). These findings suggest that HIV diversity in China is constantly evolving and gaining in complexity. CRF07_BC is less pathogenic than subtype B, while CRF01_AE is as pathogenic as B.

Characterization and Recombinant Genotypes of HIV-1 in Gansu Province, China.

It is important to monitor the diversity and evolution of HIV-1 genotypes, especially in some remote and undeveloped regions in China where the diversity and distribution of HIV-1 genotypes are not fully clear. To investigate the genotypes and distribution of HIV-1 in far Northwestern Gansu Province of China, we selected 220 HIV-1-positive plasma samples from the Center for Disease Control and Prevention (CDC) in Gansu from January 2016 to December 2018. The viral load of inclusion samples were over 1,000 copies per milliliter. The gag, pol, and env gene of HIV-1 were amplified by nested reverse transcription-polymerase chain reaction kit, sequenced, and then identified genotypes using HIV-BLAST tool and the neighbor-joining method. One hundred fifty of 220 inclusion samples were successfully determined HIV-1 genotypes. Our results show that circulating recombinant forms (CRF) 07_BC and CRF01_AE are predominant and accounted for 46.7% and 28.0%, respectively. Other HIV-1 subtypes and genotypes included B/B' (6.0%), CRF08_BC (4.0%), and C (1.3%). In addition, we reported CRF65_cpx and CRF55_01B subtypes in Gansu for the first time. Phylogenetic tree analysis showed that the sequences of different samples are scattered in different genotype groups, and no obvious aggregation occurs. Our results indicate the genetic variety and complexity of HIV-1 and provide critical information for HIV/AIDS control and prevention in Gansu Province.

Prevalence of Different Genotypes of HIV-1 in Injection Drug Users in China: A Systematic Review and Meta-Analysis.

BACKGROUND: Since 1981, an increasing trend in HIV has been observed for transmission via injection drug users (IDUs), sexual transmission and mother-to-child transmission. The IDUs are blamed for early increases in HIV-positive cases in China. OBJECTIVE: HIV genotypes of IDUs were comprehensively analysed to trace the source and relationships of the AIDS epidemic in China. METHODS: Relevant databases written in English and Chinese were searched. Overall, 7,149 publications were identified in six databases. After screening 7,104 articles according to the inclusion and exclusion criteria, 45 studies consisting of 2,765 cases were finally identified. A meta-analysis was conducted using R MATLAB software, RevMan and SPSS. Subgroup analyses focused on time frame, region, and location of different genotypes of IDUs in China. RESULTS: There were five dominant HIV-1 genotypes among the 2,765 IDU cases. The proportions of CRF07_BC, CRF01_AE, CRF08_BC, subtype B/B', and subtype C were 45.18% (95% CI: 33.55-57.08%), 16.00% (95% CI: 9.39-23.82%), 13.43% (95% CI: 7.32-20.84%), 3.58% (95% CI: 1.52-6.24%), and 0.90% (95% CI: 0.04-2.43%), respectively. HIV genotypes transmitted among IDUs in China are primarily CRF07-BC, followed by CRF01-AE and CRF08-BC. Across the different time frames and regions, CRF07_BC was the most prevalent HIV-1 genotype among IDUs, while CRF08_BC was the most prevalent genotype in the southwest region. CONCLUSION: Our study reveals that CRF07-BC was the dominant prevalent strain among IDUs from 1991 to 2015 in China, while CRF08-BC was the dominant prevalent strain among IDUs in southwestern China. This systematic review and meta-analysis shows evidence of the comprehensive prevalence of different genotypes, data and characteristics of HIV among IDUs in China.

Design Redox-Sensitive Drug-Loaded Nanofibers for Bone Reconstruction.

Implantation of a scaffold into the body in a safe and convenient manner remains a challenge in the repair of patient bone defect. In the present study, a strategy for fabrication of the redox-sensitive nanofibers with a core-shell structure that can deliver the growth factors in a tunable manner is presented. Poly(ethylene oxide) (PEO) and bone morphogenetic protein 2 (BMP-2) forms the inner core region, and a mixture of poly(epsilon-caprolactone) (PCL) and redox-responsive c-6A PEG-PCL nanogel with -S-S- bond forms the outer shell. The redox-sensitive shell of the nanofibers can respond the change of the GSH (glutathione) concentration and thus regulate the BMP-2 release behavior in vitro and in vivo. In vitro cytotoxicity results indicated that the redox-sensitive nanofiber had good osteoinduction. The in vivo results demonstrated that the nanofibers exhibited a capacity of prompting new bone generation in the bone defect. Therefore, the redox-responsive nanofiber in the present study may be of great potential for application in bone reconstruction.

Bio-inspired microcapsule for targeted antithrombotic drug delivery.

Thrombosis or embolism is the leading cause of death and long-term adult disability worldwide. To reduce the risk of thrombosis and hemorrhaging in patients, a facile and versatile method was developed to fabricate microcapsules for targeted antithrombotic drug delivery. The microcapsules were prepared via oxidative polymerization of dopamine on polystyrene microspheres, followed by immobilization of fibrinogen onto the surface of poly(dopamine) layers. Subsequently, microcapsules were obtained by removing the cores with THF. Nattokinase was loaded into the microcapsules via diffusion. The loading amount was approximately 0.05 mg g-1 at 37 °C, and the loading efficiency was nearly 75%, based on the initial concentration of nattokinase in PBS. The release of nattokinase was a gradual process at 37 °C, and the activity of the targeted activated platelets was highly efficient. The antithrombotic activity of the nattokinase microcapsules was evidenced by the sharp dissolution of fibrin clots and the blood clotting time indexes. A gradual release mechanism of platelet-inspired microcapsules used for targeted antithrombotic therapy was proposed. This strategy for targeted antithrombotic drug delivery, which lowers the demand dose and minimizes side effects while maximizing drug efficacy, provides a potential new way to treat life-threatening diseases caused by vascular disruption.

Introducing multiple bio-functional groups on the poly(ether sulfone) membrane substrate to fabricate an effective antithrombotic bio-interface.

It has been widely recognized that functional groups on biomaterial surfaces play important roles in blood compatibility. To construct an effective antithrombotic bio-interface onto the poly(ether sulfone) (PES) membrane surface, bio-functional groups of sodium carboxylic (-COONa), sodium sulfonic (-SO3Na) and amino (-NH2) groups were introduced onto the PES membrane surface in three steps: the synthesis of PES with carboxylic (-COOH) groups (CPES) and water-soluble PES with sodium sulfonic (-SO3Na) groups and amino (-NH2) groups (SNPES); the introduction of carboxylic groups onto the PES membrane by blending CPES with PES; and the grafting of SNPES onto CPES/PES membranes via the coupling of amino groups and carboxyl groups. The physical/chemical properties and bioactivities were dependent on the proportions of the additives. After introducing bio-functional groups, the excellent hemocompatibility of the modified membranes was confirmed by the inhibited platelet adhesion and activation, prolonged clotting times, suppressed blood-related complement and leukocyte-related complement receptor activations. Furthermore, cell tests indicated that the modified membranes showed better cytocompatibility in endothelial cell proliferation than the pristine PES membrane due to the synergistic promotion of the functional groups. To sum up, these results suggested that modified membranes present great potential in fields using blood-contacting materials, such as hemodialysis and surface endothelialization.

Fabrication of anticoagulation layer on titanium surface by sequential immobilization of poly (ethylene glycol) and albumin.

This paper presents a simple method to sequentially immobilize poly (ethylene glycol) (PEG) and albumin on titanium surface to enhance the blood compatibility. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) analysis indicated that PEG and albumin were successfully immobilized on the titanium surface. Water contact angle results showed a better hydrophilic surface after the immobilization. The immobilized PEG or albumin can not only obviously prevent platelet adhesion and activation but also prolong activated partial thromboplastin time (APTT), leading to the improved anticoagulation. Moreover, immobilization of albumin on PEG-modified surface can further improve the anticoagulation. The approach in the present study provides an effective and efficient method to improve the anticoagulation of blood-contact biomedical devices such as coronary stents.