A modeling method for thermal steady-state simulation of the four-layer printed circuit board.

Thermal simulation of a Printed Circuit Board (PCB) can help identify potential overheating risks in the circuit. The proposed modeling method combines analytical temperature solutions and numerical approximations. Only Fourier-series analytical solutions related to the prepreg-layer surfaces need to be calculated, rather than the entire structure. Heat transfer through the lateral sides of a PCB is approximately considered as part of the compensated heat flux of the insulating-layer surface boundaries. Heat diffusion within or between metal layers is numerically approximated using the finite volume method. The core layer is treated as "thermally-thick". Temperature-dependent boundary conditions are considered through iterations. A test solver was developed based on the method. The modeling accuracy was validated by comparison with COMSOL Multiphysics for a four-layer structure with a moderate degree of discretization. Additionally, a PCB for generating DC 3.3V was designed, tested, and modeled, with the modeling results confirmed by the thermal images. The electro-thermal analysis of the distribution of electric potential and Joule heating in traces and vias was integrated into the PCB model. The layout maps of the PCB were further adjusted to reduce Joule heating in the output circuit, and the improvement on reducing the IR drop and hotspot temperature was examined.

MXenes for Wearable Physical Sensors toward Smart Healthcare.

The gradual rise of personal healthcare awareness is accelerating the deployment of wearable sensors, whose ability of acquiring physiological vital signs depends on sensing materials. MXenes have distinct chemical and physical superiorities over other 2D nanomaterials for wearable sensors. This review presents a comprehensive summary of the latest advancements in MXenes-based materials for wearable physical sensors. It begins with an introduction to special structural features of MXenes for sensing performance, followed by an in-depth exploration of versatile functionalities. A detailed description of different sensing mechanisms is also included to illustrate the contribution of MXenes to the sensing performance and its improvement. In addition, the real-world applications of MXenes-based physical sensors for monitoring different physiological signs are included as well. The remaining challenges of MXenes-based materials for wearable physical sensors and their promising opportunities are finally narrated, in conjunction with a prospective for future development.

Characteristics and performance of algal-bacterial granular sludge in photo-sequencing batch reactors under various substrate loading rates.

The algae-bacterial granular sludge (ABGS) technology has garnered significant attention due to its remarkable attributes of low carbon emissions. To investigate the performance of the ABGS system under various substrate loading rates, the parallel photo-sequencing batch reactors (P1 and P2) were set up. The results indicated that chlorophyll-a content and extracellular polymeric substance content were measured at 10.7 ± 0.3 mg/L and 61.4 ± 0.7 mg/g SS in P1 under relatively low substrate loading rate (0.9 kg COD/m3/d and 0.09 kg N/m3/d). Moreover, kinetic study revealed that the maximal specific P uptake rate for P1 reached 0.21 mg P/g SS/h under light conditions, and it achieved 0.078 mg P/g SS/h under dark conditions, highlighting the significant role on phosphorus removal played by algae in the ABGS system. The microbial analysis and scanning electron microscopy confirmed that filamentous algae predominantly colonize the surface in P1, whereas spherical bacteria dominate the surface of granular sludge in P2. Additionally, a diverse array of microorganisms including bacteria, algae, and metazoa such as Rotifers and Nematodes were observed in both systems, providing evidence for the establishment of a symbiotic system. This study not only confirmed the ability of ABGS for efficient N and P removal under different substrate loading conditions but also highlighted its potential to enhance the ecological diversity of the reaction system.

Biological performance of a bioabsorbable magnesium-magnesium phosphate cement interbody fusion cage in a porcine lumbar interbody fusion model: a feasibility study.

PURPOSE: The aim of the study was to evaluate the feasibility of a bioabsorbable cage consisting of magnesium and magnesium phosphate cement (MPC) in a porcine lumbar interbody fusion model. METHODS: Twelve male Ba-Ma mini pigs underwent lumbar discectomy and fusion with an Mg-MPC cage or a PEEK cage at the L3/L4 and L4/L5 level. Computed tomography (CT) scans were made to evaluate the distractive property by comparing average disc space height (DSH) before and at 6, 12, and 24 weeks after the operation. After the lumbar spines were harvested at 6 or 24 weeks after the operation, micro-CT examination was conducted to analyze the fusion rate, and stiffness of motion segments was investigated through mechanical tests. A histological study was performed to evaluate the tissue type, inflammation, and osteolysis in the intervertebral space. RESULTS: CT scans showed no significant difference between the two groups in average DSH at each time point. Micro-CT scans revealed an equal fusion rate in both groups (0% at 6 weeks, 83.3% at 24 weeks). Both groups showed time-dependent increases in stability, the Mg-MPC cages achieved an inferior stiffness at 6 weeks and a comparable stiffness at 24 weeks. Histologic evaluation showed the presence of newly formed bone in both groups. However, empty spaces were observed at the interface or around the Mg-MPC cages. CONCLUSION: Compared with the PEEK cages, the Mg-MPC cages achieved comparable distraction, fusion rate, and spinal stability at 24 weeks after the operation. However, due to inferior stiffness at the early stage and fast degradation, further modification of material composition and design are necessary.

[The Optimal Storage Condition and Storage Time of Umbilical Cord Blood from Collection to Preparation].

OBJECTIVE: To explore the optimal storage condition and time of umbilical cord blood from collection to preparation. METHODS: Collect cord blood samples from 30 healthy newborns, with each new born's umbilical cord blood was divided into two parts on average. One part was stored in cold storage (4 ℃) and the other was stored at room temperature (20-24 ℃). Samples were taken at 24, 36, 48, 60 and 72 h, respectively, total nucleated cells (TNC) count and TNC viability was analyzed. Flow cytometry was used to detect the ratio of viable CD34+ cells to viable CD45+ cells and viability of CD34+ cells, and colony-forming unit-granulocyte-macrophage (CFU-GM) count was performed by hematopoietic progenitor cell colony culture. The change trend of each index over time was observed, and the differences in each index was compared between cold storage and room temperature storage under the same storage time. RESULTS: The TNC count (r 4 ℃=-0.9588， r 20-24 ℃=-0.9790), TNC viability (r 4 ℃=-0.9941， r 20-24 ℃=-0.9970), CD34+ cells viability (r 4 ℃=-0.9932， r 20-24 ℃=-0.9828) of cord blood stored in cold storage (4 ℃) and room temperature storage (20-24 ℃) showed a consistent downward trend with the prolongation of storage time. The percentage of viable CD34+ cells (r 4 ℃=0.9169， r 20-24 ℃=0.7470) and CFU-GM count (r 4 ℃=-0.2537， r 20-24 ℃=-0.8098) did not show consistent trends. When the storage time was the same, the TNC count, TNC viability, CD34+ cells viability and CFU-GM count of cord blood stored in cold storage were higher than those stored at room temperature. Under the same storage time (24, 36, 48, 60 or 72 h), TNC viability in room temperature storage was significantly lower than that in cold storage (P <0.001), but TNC count, percentage of viable CD34+ cells and CFU-GM count were not significantly different between room temperature storage and cold storage. When stored at room temperature for 24 h and 36 h, the viability of CD34+ cells was significantly lower than that in cold storage (P <0.001, P <0.01), when the storage time for 48, 60 and 72 h, there was no significant difference in the CD34+ cells viability between room temperature storage and cold storage. CONCLUSION: It is recommended that cord blood be stored in cold storage (4 ℃) from collection to preparation, and processed as soon as possible.

Scalable and Multifunctional Polyurethane/MXene/Carbon Nanotube-Based Fabric Sensor toward Baby Healthcare.

Continuous monitoring of physiological health status and effective protection against external hazards is an indispensable aspect of healthcare management for critically vulnerable populations, particularly for infants or babies. So, the exploration of all-in-one devices remains critical to avoiding their injury and illness. The integration of multiple properties such as sensing, electromagnetic protection, warming/cooling, and water/bacterial repellence into a common fabric is no doubt a promising solution to coping with diverse application scenarios. However, achieving simultaneous integration in an effective and durable fashion faces huge challenges. Herein, multifunctional fabric was achieved by sequentially coating MXene, carbon nanotubes (CNTs), and self-healing polyurethane (PU) onto cotton fabric. The outstanding conductivity of MXene and CNTs as well as the self-healing ability of PU synergistically enable a flexible, breathable, protective, and sensing fabric with a good durability. It could detect the body motions like bending of the finger, elbow, wrist, and knee, with a high gauge factor of 8.78 and fast response. Moreover, this sensing fabric could protect the wearers against electromagnetic waves and bacteria, delivering a minimum reflection loss of -57.6 dB at 7.6 GHz and high bacterial inhibition efficiency due to the incorporation of MXene and polyethylenimine. Besides, the electrothermal performance of carbonaceous materials enables them to act as a heater for body warmth. The synergistic design of this multifunctional textile offers a promising strategy for producing advanced smart textiles, holding great promise in infant or baby healthcare.

Biocompatible Silica-Coated Europium-Doped CsPbBr3 Nanoparticles with Luminescence in Water for Zebrafish Bioimaging.

Cesium lead halide (CsPbX3, X = Br, Cl, and I) nanocrystals (NCs) are widely concerned and applied in many fields due to the excellent photoelectric performance. However, the toxicity of Pb and the loss of luminescence in water limit its application in vivo. A stable perovskite nanomaterial with good bioimaging properties is developed by incorporating europium (Eu) in CsPbX3 NCs followed with the surface coating of silica (SiO2) shell (CsPbX3:Eu@SiO2). Through the surface coating of SiO2, the luminescence stability of CsPbBr3 in water is improved and the leakage of Pb2+ is significantly reduced. In particular, Eu doping inhibits the photoluminescence quantum yield reduction of CsPbBr3 caused by SiO2 coating, and further reduces the release of Pb2+. CsPbBr3:Eu@SiO2 nanoparticles (NPs) show efficient luminescence in water and good biocompatibility to achieve cell imaging. More importantly, CsPb(ClBr)3:Eu@SiO2 NPs are obtained by adjusting the halogen components, and green light and blue light are realized in zebrafish imaging, showing good imaging effect and biosafety. The work provides a strategy for advanced perovskite nanomaterials toward biological practical application.

An Evidence Map of Clinical Practice Guideline Recommendations and Quality on Venous Leg Ulcer.

Significance: Venous leg ulcers (VLUs) are the most common venous disease, mainly presenting as open skin lesions on the legs or feet and are an important concern in clinical care settings. Recent Advances: Comprehensive tactics were employed to search electronic databases PubMed, Embase, guideline databases, and society websites were searched for Clinical Practice Guidelines (CPGs) on VLU care. The basic information, recommendations for the VLUs, methodological quality, and reporting quality of VLU's CPGs were extracted and captured in Excel. The quality of each CPG was independently assessed by four researchers using AGREE II instrument and the RIGHT checklist. Critical Issues: This study included 19 CPGs with a combined 23 recommendations. The assessment of VLUs was summarized based on the recommendations of VLUs in 11 major items; six on VLU's diagnosis and six on therapeutic strategies of VLUs. The identified CPGs were of mixed quality, and the highest score based on the scope and purpose was 82.85 ± 11.66, whereas the lowest mean score based on the editorial independence by AGREE II was 59.93 ± 21.50. Regarding the RIGHT checklist, field one (basic information) had the highest reporting rate (84.33%), whereas field five (review and quality assurance) had the lowest quality of CPGs (41.11%). Future Directions: This evidence map provided new perspectives in the presentation of evidence. In addition, the evidence map collected and evaluated the characteristics of published CPGs. Thus, the evidence map enhances our knowledge and promotes the development of trustworthy CPGs for VLUs.

Evidence mapping of clinical practice guidelines on nutritional management for pressure injuries and their quality.

CONTEXT: The safety and efficacy of nutritional management for pressure injuries (PIs) have been the subjects of ongoing interest. Some evidence demonstrated that nutrition is essential for skin and tissue viability, supporting tissue repair for healing the pressure injury. OBJECTIVE: This investigation aimed to systematically review clinical practice guidelines (CPGs) for the nutritional management of PIs and furnish an evidence map to assess research trends and CPG gaps. METHODS: The PubMed, Embase, and guidelines databases, and society websites were searched for CPGs for the nutritional management of PIs. The basic recommendations for the nutritional management of PIs, method quality, and reporting CPGs quality were identified and imported into Excel. Four researchers independently elucidated each CPG's quality via the Appraisal of Guidelines for Research & Evaluation (AGREE) II instrument and the Reporting Items for Practice Guidelines in Healthcare (RIGHT) checklist. All bubble charts were generated using Excel software. RESULTS: This review included 12 CPGs with a combined 23 recommendations. The nutrition screening and assessment were summarized on the basis of the PI recommendations for 6 major items, 12 items on nutrition management, and 3 on PI education. The assessed CPGs had mixed quality, and the highest score ± standard deviation based on the clarity of presentation was 83.46 ± 7.62, whereas the lowest mean score based on AGREE II applicability was 53.31 ± 16.90. Field 1 (basic information) in the RIGHT checklist had the greatest reporting rate (68.06%), whereas field 5 (review and quality assurance) had the lowest CPGs quality (41.67%). CONCLUSION: This investigation furnishes an evidence map and provides new perspectives on the CPGs for the nutritional management of PIs. However, the CPGs included still need improvement, especially in the applicability and editorial independence domains.

Prediction of phase transition and time-varying dynamics of the (2+1)-dimensional Boussinesq equation by parameter-integrated physics-informed neural networks with phase domain decomposition.

A meaningful topic that needs to be explored in the field of nonlinear waves is whether a neural network can reveal the phase transition of different types of waves and novel dynamical properties. In this paper, a physics-informed neural network (PINN) with parameters is used to explore the phase transition and time-varying dynamics of nonlinear waves of the (2+1)-dimensional Boussinesq equation describing the propagation of gravity waves on the surface of water. We embed the physical parameters into the neural network for this purpose. Via such algorithm, we find the exact boundary of the phase transition that distinguishes the periodic lump chain and transformed wave, and the inexact boundaries of the phase transition for various transformed waves are detected through PINNs with phase domain decomposition. In particular, based only on the simple soliton solution, we discover types of nonlinear waves as well as their interesting time-varying properties for the (2+1)-dimensional Boussinesq equation. We further investigate the stability by adding noise to the initial data. Finally, we perform the parameters discovery of the equation in the case of data with and without noise, respectively. Our paper introduces deep learning into the study of the phase transition of nonlinear waves and paves the way for intelligent explorations of the unknown properties of waves by means of the PINN technique with a simple solution and small data set.

Ternary Rare Earth Alloy Pt3-xIrxSc Nanoparticles Modulate Negatively Charged Pt via Charge Transfer To Facilitate pH-Universal Hydrogen Evolution.

Rare earth (RE) elements possess electronic configurations that can provide additional pathways for tailoring the electronic structures of active elements through alloying, making it an important area of exploration in electrocatalysis. However, the large negative redox potential between RE and Pt has hindered the development of RE nanoalloys. In this study, a solid-phase synthesis strategy was employed to synthesize ternary Pt3-xIrxSc nanoparticles (NPs). By leveraging the electronegativity difference between Pt (2.28), Ir (2.20), and Sc (1.36), a charge-balance strategy was implemented to stabilize and enhance the catalytic performance of the alloy. The electron transfer from Sc to Pt/Ir results in the latter being negatively charged, and the Ir modifies the electron density of Pt, enabling favorable adsorption of active H species during the hydrogen evolution reaction (HER). Pt2IrSc exhibits enhanced HER activity at all pH values, achieving low overpotentials at 10 mA cm-2 of only 13, 18, and 25 mV in 0.5 M H2SO4, 1 M PBS, and 1 M KOH, respectively. This electrocatalyst also exhibits robust electrocatalytic stability even after 20,000 cycles. This work represents an application of the charge balance strategy to RE nanoalloys, and it is expected to inspire the design and synthesis of highly reactive RE nanoalloys.

Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment.

Maximizing the utilization of industrial by-products, such as iron ore tailings (IOTs) and coal fly ash (CFA), is crucial toward sustainable development. This study provides a meticulous insight into the optimization, mechanism, and assessment of the co-utilization of IOTs and CFA for the preparation of porous ceramsite. Micro-CT results revealed that the prepared ceramsite exhibited an exceptional porosity, peaking at 56.98%, with a wide range of pore diameters (3.55-959.10 µm) under optimal conditions (IOTs content at 76%, preheating at 550 °C for 15 min, and sintering at 1177 °C for 14 min), while maintaining good mechanical properties (water adsorption of 1.28%, comprehensive strength of 8.75 MPa, apparent density of 1.37 g/cm3, and bulk density of 0.62 g/cm3). The primary parameters affecting the porosity were identified and ranked as follows: sintering temperature > IOTs content > sintering time. The formation and growth of pores could be attributed to the equilibrium relationship between the liquid-phase surface tension and the gas expansion force, accompanied by pore wall thinning and pore merging. Notably, the prepared ceramsite is both ecologically feasible and economically rewarding, boasting a profit margin of 9.47 $/ton. The comprehensive life cycle assessment (LCA) conducted further highlights the potential of its large-scale implementation for promoting sustainable development. This study provides an innovative strategy for the co-utilization of IOTs and CFA, with advantages such as cost-effectiveness, ecological feasibility and scalability of production.

A swarm of helical photocatalysts with controlled catalytic inhibition and acceleration by magneto-optical stimuli.

Highly persistent and toxic organic pollutants increasingly accumulate in freshwater resources, exacerbating the human water scarcity crisis. Developing novel microrobots with high catalytic performance, high mobility, and recycling capability integrated to harness energy from the surrounding environment to degrade pollutants effectively remains a challenge. Here, we report a kind of Spirulina (SP)-based magnetic photocatalytic microrobots with a substantially decreased band gap than that of pure photocatalysts, facilitating the generation of stable holes and electrons. Under sunlight irradiation, the degradation rate of rhodamine B (RhB) by the microrobots could be increased by 7.85 times compared with that of pure BiOCl, indicating its excellent photocatalytic performance. In addition, the microrobots can swarm in a highly controllable manner to the targeted regions and perform selective catalytic degradation of organic pollutants in specific areas by coupling effect of light and magnetic field. Importantly, the catalytic capability of the swarming microrobots can be activated by light stimulus whereas inhibited by magneto-optical stimuli, with a rate constant 2.15 times lower than that of pure light stimulation. The biohybrid and magneto-optical responsive microrobots offer a potential platform for selective pollutants catalysis at assigned regions in wastewater treatment plants.

Folic Acid Protects against Ethanol-Induced Hepatic Mitophagy Imbalance by ROS Scavenging and Attenuating the Elevated Hcy Levels.

Ample evidence indicates that ethanol-induced oxidative stress and mitochondrial dysfunction are central to the pathogenesis of alcoholic liver disease (ALD). As an adaptive quality control mechanism, mitophagy removes dysfunctional mitochondria to avert hepatic lesions in ALD. Folic acid exhibits potential radical scavenging properties and has been proven to ameliorate mitochondrial disorder in oxidative stress-related diseases. In this study, we aimed to uncover the mitophagy regulatory effects of folic acid in a 10w alcohol C57BL/6J mice feeding model (56% v/v) and L02 cells model cultured with ethanol (2.5% v/v). The results showed that folic acid alleviates ethanol-induced liver injury, decreasing oxidative stress and restoring liver enzyme. Furthermore, folic acid improved the mitochondrial function and inhibited ethanol-activated mitophagy through decreasing PINK1-Parkin and Drp1 expression, which inhibited the release of mitochondrial cytochrome C to the cytoplasm, preventing hepatocyte apoptosis. Intriguingly, folic acid attenuates the elevated hepatic homocysteine (Hcy) level. Additionally, the pretreatment of L02 cells with folic acid also ameliorated Hcy-induced oxidative damage, mitochondrial fission, and mitophagy. In summary, these results suggest that folic acid has beneficial effects in mitophagy remodeling by ROS scavenging and facilitating Hcy metabolism and could be developed as a potential therapeutic agent against ALD.

Fucoidan from Saccharina japonica Alleviates Hyperuricemia-Induced Renal Fibrosis through Inhibiting the JAK2/STAT3 Signaling Pathway.

Fucoidan is a native sulfated polysaccharide mainly isolated from brown seaweed, with diverse pharmacological activities, such as anti-inflammatory and antifibrosis. Hyperuricemia (HUA) is a common metabolic disease worldwide and mainly causes hyperuricemic nephropathy, including chronic kidney disease and end-stage renal fibrosis. The present study investigated the protective function of fucoidan in renal fibrosis and its pharmacological mechanism. The renal fibrotic model was established with the administration of potassium oxonate for 10 weeks. The protein levels of related factors were assessed in HUA mice by an enzyme-linked immunosorbent assay (ELISA) and western blotting. The results showed that fucoidan significantly reduced the levels of serum uric acid, blood urea nitrogen (BUN), α-smooth muscle actin (α-SMA), and collagen I, and improved kidney pathological changes. Furthermore, renal fibrosis had been remarkably elevated through the inhibition of the epithelial-to-mesenchymal transition (EMT) progression after fucoidan intervention, suppressing the Janus kinase 2 (JAK2) signal transducer and activator of transcription protein 3 (STAT3) signaling pathway activation. Together, this study provides experimental evidence that fucoidan may protect against hyperuricemia-induced renal fibrosis via downregulation of the JAK2/STAT3 signaling pathway.

Dietary Folic Acid Supplementation Attenuates Maternal High-Fat Diet-Induced Fetal Intrauterine Growth Retarded via Ameliorating Placental Inflammation and Oxidative Stress in Rats.

The placenta is particularly susceptible to inflammation and oxidative stress, leading to placental vascular dysfunction and placental insufficiency, which is associated with fetal intrauterine growth restriction (IUGR). It is unknown whether folic acid (FA) supplementation can alleviate high-fat diet-induced IUGR in rats by improving placental function. In this study, pregnant rats were randomized into one of four diet-based groups: (1) control diet (CON), (2) control diet supplemented with FA, (3) high-fat diet (HFD), and (4) high-fat diet supplemented with FA (HFD + FA). Dams were sacrificed at gestation day 18.5 (GD18.5). The results indicated that dietary FA supplementation normalized a maternal HFD-induced decrease in fetal weight. The decrease in placental efficiency, labyrinth zone (LZ) area, blood sinusoid area, vascular density, and the levels of angiogenesis factors induced by a maternal HFD were alleviated by the addition of FA, suggesting that FA supplementation can alleviate placental vascular dysplasia. Furthermore, FA supplementation increased the protein expressions of SIRT1, inhibited NF-κB transcriptional activation, attenuated the levels of NF-κB/downstream pro-inflammatory cytokines, induced Nrf2 activation, and increased downstream target protein expression. In conclusion, we found that dietary FA supplementation during pregnancy could improve maternal HFD-induced IUGR by alleviating placental inflammation and oxidative stress, which may be associated with the regulation of SIRT1 and its mediated NF-κB and Nrf2 signaling pathways.

The ER calcium channel Csg2 integrates sphingolipid metabolism with autophagy.

Sphingolipids are ubiquitous components of membranes and function as bioactive lipid signaling molecules. Here, through genetic screening and lipidomics analyses, we find that the endoplasmic reticulum (ER) calcium channel Csg2 integrates sphingolipid metabolism with autophagy by regulating ER calcium homeostasis in the yeast Saccharomyces cerevisiae. Csg2 functions as a calcium release channel and maintains calcium homeostasis in the ER, which enables normal functioning of the essential sphingolipid synthase Aur1. Under starvation conditions, deletion of Csg2 causes increases in calcium levels in the ER and then disturbs Aur1 stability, leading to accumulation of the bioactive sphingolipid phytosphingosine, which specifically and completely blocks autophagy and induces loss of starvation resistance in cells. Our findings indicate that calcium homeostasis in the ER mediated by the channel Csg2 translates sphingolipid metabolism into autophagy regulation, further supporting the role of the ER as a signaling hub for calcium homeostasis, sphingolipid metabolism and autophagy.

Repurposing of steel rolling sludge: Solvent-free preparation of α-Fe2O3 nanoparticles and its application for As(III/V)-containing wastewater treatment.

Steel rolling sludge (SRS) is the by-product of metallurgical industry with abundant iron content, which needs to be utilized for producing high value-added products. Herein, cost-effective and highly adsorbent α-Fe2O3 nanoparticles were prepared from SRS via a novel solvent-free method and applied to treat As(III/V)-containing wastewater. The structure of the prepared nanoparticles was observed to be spherical with a small crystal size (12.58 nm) and high specific surface area (145.03 m2/g). The nucleation mechanism of α-Fe2O3 nanoparticles and the effect of crystal water were investigated. More importantly, compared with the traditional methods of preparation cost and yield, this study was found to have excellent economic benefits. The adsorption results indicated that the adsorbent could effectively remove arsenic over a wide pH range, and the optimal performance of nano adsorbent for As(III) and As(V) removal was observed at pH 4.0-9.0 and 2.0-4.0, respectively. The adsorption process was consistent with pseudo-second-order kinetic and Langmuir isothermal model. The maximum adsorption capacity (qm) of adsorbent for As(III) and As(V) was 75.67 mg/g and 56.07 mg/g, respectively. Furthermore, α-Fe2O3 nanoparticles exhibited great stability, and qm remained at 64.43 mg/g and 42.39 mg/g after five cycles. Particularly, the As(III) was removed by forming inner-sphere complexes with the adsorbent, and it partially oxidized to As(V) during this process. In contrast, the As(V) was removed by electrostatic adsorption and reaction with -OH on the adsorbent surface. Overall, resource utilization of SRS and the treatment of As(III)/(V)-containing wastewater in this study are in line with the current developments in the environmental and waste-to-value research.

High-breathable, antimicrobial and water-repellent face mask for breath monitoring.

Face masks with multiple functionalities and exceptional durability have attracted increasing interests during the COVID-19 pandemic. How to integrate the antibacterial property, comfortability during long-time wearing, and breath monitoring capability together on a face mask is still challenging. Here we developed a kind of face mask that assembles the particles-free water-repellent fabric, antibacterial fabric, and hidden breath monitoring device together, resulting in the highly breathable, water-repellent, and antibacterial face mask with breath monitoring capability. Based on the rational design of the functional layers, the mask shows exceptional repellency to micro-fogs generated during breathing while maintaining high air permeability and inhibiting the passage of bacteria-containing aerogel. More importantly, the multi-functional mask can also monitor the breath condition in a wireless and real-time fashion, and collect the breath information for epidemiological analysis. The resultant mask paves the way to develop multi-functional breath-monitoring masks that can aid the prevention of the secondary transmission of bacteria and viruses while preventing potential discomfort and face skin allergy during long-period wearing.

Evaluation of novel anti-CEACAM6 antibody-based conjugates for radioimmunotheranostics of pancreatic ductal adenocarcinoma.

BACKGROUND: Pancreatic ductal adenocarcinoma (PDAC) is a highly malignant solid tumor that lacks early diagnostic methods. Recently, targeted immunotherapy and radiotherapy have been integrated with radionuclide-antibody conjugate drugs, which can be used for targeted diagnosis and dynamic imaging of tumors. CEACAM6 is overexpressed in pancreatic tumors and is a potential theranostic target for PDAC. We aimed to develop a novel targeted carrier for theranostics of PDAC and other solid tumors. METHODS: Based on camelid heavy-chain-only antibodies, we developed a CEACAM6-targeting recombinant antibody NY004, and evaluated it as a novel antibody-carrier for imaging and therapy of cancer in tumor models. We labeled NY004 with theranostic nuclides and applied this self-developed antibody platform in diagnostic imaging and antitumor assessment in PDAC models. RESULTS: Through microPET, IHC, and biodistribution assays, targeting and biodistribution of [89Zr]-NY004 in solid tumors including PDAC was examined, and the investigated tumors were all CEACAM6-positive malignancies. We found that NY004 was suitable for use as a drug carrier for radioimmunotheranostics. Our study showed that NY004 was characterized by high targeted uptake and a long retention time in PANC-1 tumors (up to 6 days post-injection), with good specificity and high imaging efficiency. Therapeutic evaluation of the radionuclide-labeled antibody drug [177Lu]-NY004 in PDAC tumor-bearing model revealed that NY004 had high and prolonged uptake in tumors, relatively low non-target organ uptake, and good anti-tumor efficacy. CONCLUSION: As a drug platform for radiotheranostics, CEACAM6-specific antibody NY004 met the requirements of easy-labeling, targeting specificity, and effective persistence in pancreatic adenocarcinoma tissues. KEY POINTS: • [89Zr]-NY004 has good specificity and high imaging efficiency, and is characterized by high tumor-targeting uptake and a long tumor retention time as a PET molecular imaging tracer. • Therapeutic radionuclide-conjugated antibody drug [177Lu]-NY004 has high uptake and prolonged uptake duration in tumors, low non-target organ uptake, and significant tumor-inhibiting efficacy in PDAC model. • The self-developed antibody structure NY004 is a promising drug platform for radioimmunotheranostics of CEACAM6-positive tumors including pancreatic ductal adenocarcinoma.