[Status and pathways of factors influencing physical activity time among elementary and junior high school students in Beijing].

OBJECTIVE: To describe the current distribution of daily physical activity time among elementary and junior high school students in Beijing, and to analyze the influencing factors and pathways at the individual, family, school and community levels. METHODS: Data were drawn upon from a cross-sectional investigation in Beijing in 2023, and a total of 3 157 elementary and junior high school students were included in the final analysis. Questionnaire was used to collect data on basic characteristics, overall and in-school physical activity time per day, the number of sports mastered, perceived physical activity benefits and barriers scales, perceived family, school, and community physical activity supportive environment scales. Log-binomial regression model was used to analyze the associations between physical activity time and influencing factors, and structural equation modeling was used for the path analysis of the influencing factors. RESULTS: The reported rates of ≥2 hours of overall physical activity per day and ≥1 hour of physical activity in school per day among elementary and junior high school students in Beijing in 2023 were 33.1% and 64.8%, respectively. The associations between the number of sports mastered by students and the reported rate of ≥2 hours of overall physical activity per day showed a typical dose-response relationship (P-trend<0.001). The perceived physical activity benefits-to-barriers ratio (PR=1.24, 95%CI: 1.20-1.28), scores of perceived family, school, and community physical acti-vity supportive environment scales were all positively associated with the reported rate of ≥2 hours of overall physical activity per day (PR=1.51, 95%CI: 1.38-1.66; PR=1.50, 95%CI: 1.37-1.64; PR=1.21, 95%CI: 1.16-1.27). The structural equation modeling showed that the number of sports mastered by the students (ß=0.11, P<0.001), perceived physical activity benefits-to-barriers ratios (ß=0.15, P<0.001), and scores of supportive environment scales consisting of family, school, and community (ß=0.13, P<0.001) were associated with the reported rates of ≥2 hours of overall physical activity per day directly. In addition, the scores of supportive environment scales could indirectly influence the reported rates of ≥2 hours of overall physical activity per day by influencing the number of sports mastered by the students (ß=0.21, P<0.001) and the perceived physical activity benefits-to-barriers ratio (ß=0.56, P<0.001), while the number of sports mastered by the students could indirectly influence the reported rates of ≥2 hours of overall physical activity per day by influencing the perceived physical activity benefits-to-barriers ratios (ß=0.05, P=0.003). The influencing factors and pathways of the reported rates of ≥1 hour of physical activity in school per day were similar with those of the reported rates of ≥2 hours of overall physical activity per day described above. CONCLUSION: The daily physical activity time among elementary and junior high school students in Beijing in 2023 fell short of meeting the national requirement. There was a need to build a supportive environment consisting of family, school, and community for physical activity, to promote the students ' sports skills, to establish the idea of independent physical activity, and to ensure that primary and secondary school students were given one hour of physical activity time every day, both inside and outside the school.

Secular trend and projection of overweight and obesity among Chinese children and adolescents aged 7-18 years from 1985 to 2019: Rural areas are becoming the focus of investment.

BACKGROUND: The urban-rural disparities in overweight and obesity among children and adolescents are narrowing, and there is a need for long-term and updated data to explain this inequality, understand the underlying mechanisms, and identify priority groups for interventions. METHODS: We analyzed data from seven rounds of the Chinese National Survey on Students Constitution and Health (CNSSCH) conducted from 1985 to 2019, focusing on school-age children and adolescents aged 7-18 years. Joinpoint regression was used to identify inflection points (indicating a change in the trend) in the prevalence of overweight and obesity during the study period, stratified by urban/rural areas and sex. Annual percent change (APC), average annual percent change (AAPC), and 95% confidence interval (CI) were used to describe changes in the prevalence of overweight and obesity. Polynomial regression models were used to predict the prevalence of overweight and obesity among children and adolescents in 2025 and 2030, considering urban/rural areas, sex, and age groups. RESULTS: The prevalence of overweight and obesity in urban boys and girls showed an inflection point of 2000, with AAPC values of 10.09% (95% CI: 7.33-12.92%, t = 7.414, P <0.001) and 8.67% (95% CI: 6.10-11.30%, t = 6.809, P <0.001), respectively. The APC for urban boys decreased from 18.31% (95% CI: 4.72-33.67%, t = 5.926, P = 0.027) to 4.01% (95% CI: 1.33-6.75%, t = 6.486, P = 0.023), while the APC for urban girls decreased from 13.88% (95% CI: 1.82-27.38%, t = 4.994, P = 0.038) to 4.72% (95% CI: 1.43-8.12%, t = 6.215, P = 0.025). However, no inflection points were observed in the best-fit models for rural boys and girls during the period 1985-2019. The prevalence of overweight and obesity for both urban and rural boys is expected to converge at 35.76% by approximately 2027. A similar pattern is observed for urban and rural girls, with a prevalence of overweight and obesity reaching 20.86% in 2025. CONCLUSIONS: The prevalence of overweight and obesity among Chinese children and adolescents has been steadily increasing from 1985 to 2019. A complete reversal in urban-rural prevalence is expected by 2027, with a higher prevalence of overweight and obesity in rural areas. Urgent action is needed to address health inequities and increase investments, particularly policies targeting rural children and adolescents.

Efficient energy transport throughout conical implosions.

The double-cone ignition (DCI) scheme has been proposed as one of the alternative approaches to inertial confinement fusion, based on direct-drive and fast-ignition, in order to reduce the requirement for the driver energy. To evaluate the conical implosion energetics from the laser beams to the plasma flows, a series of experiments have been systematically conducted. The results indicate that 89%-96% of the laser energy was absorbed by the target, with moderate stimulated Raman scatterings. Here 2%-6% of the laser energy was coupled into the plasma jets ejected from the cone tips, which was mainly restricted by the mass reductions during the implosions inside the cones. The supersonic dense jets with a Mach number of 4 were obtained, which is favorable for forming a high-density, nondegenerated plasma core after the head-on collisions. These findings show encouraging results in terms of energy transport of the conical implosions in the DCI scheme.

Robust Superhydrophobic Composite Fabric with Self-Healing and Chemical Durability.

Superhydrophobic fabrics with multiple functions have become a research hotspot. However, it is challenging to make self-healing mechanically robust and eco-friendly superhydrophobic fabrics, which are limited by complex fabrication processes and excessive use of environmentally unfriendly solvents during fabrication. Herein, inspired by the secretion of a waxy substance from the surface of lotus leaves to restore water repellency, self-healing superhydrophobic composite fabrics (as-synthesized PA66/6-PET@Tico) are obtained by constructing a papillary TiO2 and tentacle-like fluorinated acrylate polymer (FCB015) coating on polyester-nylon composite fabrics using two-step hydrothermal method. The result indicates that PA66/6-PET@Tico with hierarchical micro/nanostructure exhibits excellent superhydrophobic and self-healing properties. Compared with FCB015 coated fabric, the contact angles (CA) of water and soybean oil rise to 172.2° and 166.8° from 137.4° and 98.8°, respectively. After mechanical abrasion, PA66/6-PET@Tico recovers a water contact angle (WCA) of 165.6° at room temperature. The WCA remains higher than 155° after 18 h of chemical corrosion. Furthermore, the bacterial inhibition rates of PA66/6-PET@Tico for Staphylococcus Aureus and Escherichia Coli are 99.90 and 98.38%, respectively. In this work, a new idea is proposed for designing a simple and effective self-healing superhydrophobic coating, expecting to promote the large-scale industrial production and application of functional surfaces.

Genomic characterization and pathogenicity of a novel fowl adenovirus serotype 11 isolated from chickens with inclusion body hepatitis in China.

Fowl adenovirus serotype 11 (FAdV-11) is one of the primary causative agents of inclusion body hepatitis (IBH), which causes substantial economic losses in the world poultry industry. In this study, we characterized the genome of the fowl adenovirus serotype 11 (FAdV-11) isolate FJSW/2021. The full genome of FJSW/2021 was 44, 154 base pairs (bp) in length and had a similar organization to that of previously reported FAdV-11 isolates. Notably, compared with those of other reported FAdV-11 strains, the preterminal protein (pTP) of FAdV-11 FJSW/2021 has six amino acid (aa) insertions (S-L-R-I-I-C) between 470 and 475 and one aa mutation of L476F; moreover, the tandem repeat (TR) regions of TR1 and TR2 were 33 bp (1 repeat) and 1,080 bp (8 repeats) shorter than those of the Canadian nonpathogenic isolate ON NP2, respectively. The pathogenicity of FJSW/2021 was studied in 10-day-old specific pathogen-free chicken embryos following allantoic cavity inoculation and in 1-day-old, 1-wk-old and 2-wk-old SPF chickens following intramuscular inoculation with 107 TCID50 of the virus. The results showed that FJSW/2021 can induce typical severe IBH in chicks less than 2 wk old. These findings highlighted the genetic differences between the pathogenic and non-pathogenic FAdV-11 isolates. The data will provide guidance for identifying the virulence factors of FAdV-11 strains. The animal challenge model developed in our study will allow precise evaluation of the efficacy of potential FAdV-11 vaccine candidates.

Role of EPAC1 in chronic pain.

Chronic pain usually lasts over three months and commonly occurs in chronic diseases (cancer, arthritis, and diabetes), injuries (herniated discs, torn ligaments), and many major pain disorders (neuropathic pain, fibromyalgia, chronic headaches). Unfortunately, there is currently a lack of effective treatments to help people with chronic pain to achieve complete relief. Therefore,it is particularly important to understand the mechanism of chronic pain and find new therapeutic targets. The exchange protein directly activated by cyclic adenosine monophosphate(cAMP) (EPAC) has been recognized for its functions in nerve regeneration, stimulating insulin release, controlling vascular pressure, and controlling other metabolic activities. In recent years, many studies have found that the subtype of EPAC, EPAC1 is involved in the regulation of neuroinflammation and plays a crucial role in the regulation of pain, which is expected to become a new therapeutic target for chronic pain. This article reviews the major contributions of EPAC1 in chronic pain.

Extranodal nasal-type NK/T-cell lymphoma with CD20 positive: A case report and review of literature.

ABSTRACT: Extranodal nasal-type natural killer (NK)/T-cell lymphoma is a type of non-Hodgkin lymphoma. Neoplastic lymphocytes are positive for CD4, CD56, and CD20, a specific B-cell marker. CD20 positive NK/T-cell lymphoma is rare, with only nine reported cases. This paper reports a case of nasal-type NK/T-cell lymphoma with CD20 positivity in a 47-year-old woman. The patient presented with bilateral nasal congestion and bloody nasal cavity secretions for 2 months. Computed tomography revealed thickening of the nasal mucosa and posterior wall of the nasopharyngeal crest, and the left and right cervical lymph nodes were enlarged. On histopathology, the lesion was composed of medium-sized atypical lymphoid cells and vascular infringement. Immunohistochemical staining showed that the tumor cells were positive for CD20, CD3, CD56, and Epstein-Barr virus (EBV)-encoded RNA in situ hybridization. The patient was treated with radiotherapy for 2 months and is currently well.

Low-temperature superelastic, anisotropic, silane-crosslinked sodium alginate aerogel for thermal insulation.

Bio-aerogels have attracted much attention owing to their remarkable properties, but their brittle and poor elasticity has limited their further applications. Here, we propose a strategy of in-situ silanization crosslinking combined with unidirectional freeze casting (SUFC) to prepare superelastic sodium alginate (SA) aerogels. The resulting aerogel was ultra-light (0.048 g/cm3), high porosity (96.86 %), and self-extinguishing from fire. Aerogels exhibited anisotropic properties, such as low-temperature elasticity (500 g compression at -70 °C 10-cycle, 99.6 % recovery), exceptional fatigue resistance (100-cycle at 50 % strain), and excellent thermal insulation (0.0696 W·m-1·K-1). Thus, the SUFC strategy provides considerable freedom for constructing multi-material, lamellar/honeycomb structured alginate-based aerogels, which pave the way to thermal insulation development at low temperatures.

Bilayer fiber membrane electrospun from polylactic acid/alginate/bromelain and polylactic acid for enhancing the functionality of tea bags.

Tea bags have been extensively used in the food industry and daily life as an efficient way to pack tea. However, the large pores of the commercial tea bags not only lead to the inner contents of tea bag susceptible to bacteria and moisture but also result in the faster water infusion which is undesired during tea brewing. In this study, the polylactic acid (PLA)-PLA/sodium alginate (SA)/bromelain (BL) bilayer fiber membrane imitating the asymmetric wetting structure of lotus leaf blades was fabricated to avoid the above disadvantages of commercial tea bag. The PLA/SA/BL skin-core nanofiber membrane which imitating the skin-core structure of lotus leaf stems was first prepared as the hydrophilic and support layer, then a hydrophobic PLA layer was deposited on top via electrospinning. The PLA-PLA/SA/BL bilayer fiber membrane had a breaking strength of 5.5 MPa and started to decompose at 260 °C. Using this bilayer membrane, tea bags were designed with a novel structure where the hydrophobic PLA layer was placed in the same direction. The novel structure endow the those tea bags a slow and directional water transfer property. Therefore, the PLA-PLA/SA/BL bilayer fiber membrane has great potential for applications as tea bags.

A qualitative study of improving megavoltage computed tomography image quality and maintaining dose accuracy using cycleGAN-based image synthesis.

BACKGROUND: Due to inconsistent positioning, tumor shrinking, and weight loss during fractionated treatment, the initial plan was no longer appropriate after a few fractional treatments, and the patient will require adaptive helical tomotherapy (HT) to overcome the issue. Patients are scanned with megavoltage computed tomography (MVCT) before each fractional treatment, which is utilized for patient setup and provides information for dose reconstruction. However, the low contrast and high noise of MVCT make it challenging to delineate treatment targets and organs at risk (OAR). PURPOSE: This study developed a deep-learning-based approach to generate high-quality synthetic kilovoltage computed tomography (skVCT) from MVCT and meet clinical dose requirements. METHODS: Data from 41 head and neck cancer patients were collected; 25 (2995 slices) were used for training, and 16 (1898 slices) for testing. A cycle generative adversarial network (cycleGAN) based on attention gate and residual blocks was used to generate MVCT-based skVCT. For the 16 patients, kVCT-based plans were transferred to skVCT images and electron density profile-corrected MVCT images to recalculate the dose. The quantitative indices and clinically relevant dosimetric metrics, including the mean absolute error (MAE), structural similarity index measure (SSIM), peak signal-to-noise ratio (PSNR), gamma passing rates, and dose-volume-histogram (DVH) parameters (Dmax , Dmean , Dmin ), were used to assess the skVCT images. RESULTS: The MAE, PSNR, and SSIM of MVCT were 109.6 ± 12.3 HU, 27.5 ± 1.1 dB, and 91.9% ± 1.7%, respectively, while those of skVCT were 60.6 ± 9.0 HU, 34.0 ± 1.9 dB, and 96.5% ± 1.1%. The image quality and contrast were enhanced, and the noise was reduced. The gamma passing rates improved from 98.31% ± 1.11% to 99.71% ± 0.20% (2 mm/2%) and 99.77% ± 0.18% to 99.98% ± 0.02% (3 mm/3%). No significant differences (p > 0.05) were observed in DVH parameters between kVCT and skVCT. CONCLUSION: With training on a small data set (2995 slices), the model successfully generated skVCT with improved image quality, and the dose calculation accuracy was similar to that of MVCT. MVCT-based skVCT can increase treatment accuracy and offer the possibility of implementing adaptive radiotherapy.

Guar-based aerogels with oriented lamellar structure and lightweight properties for flame-retardant and thermal insulation.

In this study, a multi-functional guar gum aerogel with the oriented lamellar structure, which introduced sodium silicate (Na2O·nSiO2) and phytic acid (PA) as thermal insulation additives and flame-retardant agents, respectively, was fabricated via freeze drying. Our aerogel's chemical structure, morphology, and thermal and mechanical properties were analyzed. The oriented lamellar structure was attributed to the orientated growth of ice crystals, which was induced by the "silicate-guar, guar-phytate, and phytate-silicate" multiple hydrogen bonds formed between Na2O·nSiO2, PA, and guar gum. The density of the sample with 2 wt% PA could reach 0.0335 g·cm-3, and the porosity was 5 %, along with a specific pore volume of 0.8144 cm3·g-1. The mechanical properties and thermal insulation performed significant differences in the radial and axial direction of the oriented lamella (nearly 100 % resilience while 50 % deformation quantity and 0.0235 W/(m*K) of thermal conductivity in the radial direction, up to 0.079 MPa of compressive strength in the axial direction). The presence of PA attached a good flame-retardant ability to our aerogel (The Limiting Oxygen Index (LOI) was 30.77 %). This work provides a novel and promising method for developing anisotropic aerogel with excellent potential in building energy efficiency and flame-retardant.

A Novel Kunitz-Type Serine Protease Inhibitor (HcKuSPI) is Involved in Antibacterial Defense in Innate Immunity and Participates in Shell Formation of Hyriopsis cumingii.

Serine protease inhibitors (SPIs) are abundantly reported for its inhibition against specific proteases involved in the immune responses, but SPI data related to calcareous shells are scarce. Previously, our research group has reported the proteome analysis of non-nucleated pearl powder, and a candidate matrix protein containing two Kunitz domains in the acid soluble fraction caught our attention. In the present study, the full-length cDNA sequence of HcKuSPI was obtained from Hyriopsis cumingii. HcKuSPI was specifically expressed in the mantle, with hybridization signals mainly concentrated to dorsal epithelial cells at the mantle edge and weak signals at the mantle pallium, suggesting HcKuSPI was involved in shell formation. HcKuSPI expression in the mantle was upregulated after Aeromonas hydrophila and Staphylococcus aureus challenge to extrapallial fluids (EPFs). A glutathione S transferase (GST)-HcKuSPI recombinant protein showed strong inhibitory activity against the proteases, trypsin and chymotrypsin. Moreover, HcKuSPI expression in an experimental group was significantly higher when compared with a control group during pellicle growth and crystal deposition in shell regeneration processes, while the organic shell framework of newborn prisms and nacre tablets was completely destroyed after HcKuSPI RNA interference (RNAi). Therefore, HcKuSPI secreted by the mantle may effectively neutralize excess proteases and bacterial proteases in the EPF during bacterial infection and could prevent matrix protein extracellular degradation by suppressing protease proteolytic activity, thereby ensuring a smooth shell biomineralization. In addition, GST-HcKuSPI was also crucial for crystal morphology regulation. These results have important implications for our understanding of the potential roles of SPIs during shell biomineralization.

3D-Printed Flat-Bone-Mimetic Bioceramic Scaffolds for Cranial Restoration.

The limitations of autologous bone grafts necessitate the development of advanced biomimetic biomaterials for efficient cranial defect restoration. The cranial bones are typical flat bones with sandwich structures, consisting of a diploe in the middle region and 2 outer compact tables. In this study, we originally developed 2 types of flat-bone-mimetic ß-tricalcium phosphate bioceramic scaffolds (Gyr-Comp and Gyr-Tub) by high-precision vat-photopolymerization-based 3-dimensional printing. Both scaffolds had 2 outer layers and an inner layer with gyroid pores mimicking the diploe structure. The outer layers of Gyr-Comp scaffolds simulated the low porosity of outer tables, while those of Gyr-Tub scaffolds mimicked the tubular pore structure in the tables of flat bones. The Gyr-Comp and Gyr-Tub scaffolds possessed higher compressive strength and noticeably promoted in vitro cell proliferation, osteogenic differentiation, and angiogenic activities compared with conventional scaffolds with cross-hatch structures. After implantation into rabbit cranial defects for 12 weeks, Gyr-Tub achieved the best repairing effects by accelerating the generation of bone tissues and blood vessels. This work provides an advanced strategy to prepare biomimetic biomaterials that fit the structural and functional needs of efficacious bone regeneration.

Association Between Combinations of 24-Hour Movement Behaviors and Depression Among Adolescents - Inner Mongolia Autonomous Region, China, 2019-2021.

What is already known about this topic?: In recent years, there has been growing concern regarding the escalating rates of depression among adolescents. While certain individual behaviors have been suggested as potential protective factors for mental health, there is a scarcity of research examining the collective influence of 24-hour movement behaviors. What is added by this report?: This research documented the prevalence of adolescent depression, along with the rates of adherence to 24-hour movement behavior guidelines encompassing moderate to vigorous physical activity, screen time, and sleep time, in the years 2019, 2020, and 2021. A significant correlation was observed between levels of depression and combined health behaviors. Of particular note was the finding that adherence to the "screen+sleep time" recommendation was linked with the lowest risk of depression. What are the implications for public health practice?: A comprehensive intervention that targets three 24-hour movement behaviors should be accentuated, with the combination of "sleep and screen time" potentially offering the most effective approach to managing depression.

Assessing the long-term impact of cascade hydropower development on the inundation patterns of floodplain wetlands.

The inundation process of floodplain wetlands plays a crucial role in maintaining the balance of river ecosystems, which are highly sensitive to hydrological alteration. Nevertheless, the specific mechanisms through which these hydrological changes affect the inundation patterns of floodplain wetlands are still unclear. This study aimed to investigate the impact mechanism of cascade hydropower development on the inundation process of floodplain wetlands. Multitemporal remote sensing datasets and long-term hydrometeorological data series were utilized in this study. By employing the water appearance frequency (WAF) index, wetland hydrological stability assessment, and wavelet analysis, the inundation changes in floodplain wetlands and the underlying hydrological driving mechanisms were examined. The results revealed significant alterations in the inundation frequency of floodplain wetlands due to the construction of upstream dams. Specifically, the construction of the Danjiangkou and Wangfuzhou dams led to an increase in the total inundated area of Part A (16.09 km2) and Part B (76.93 km2), respectively. Conversely, the moderate frequency inundation zone in Part C decreased (26.7 km2) after the construction of the Cuijiaying Dam. The typical floodplain wetland 7 shifted from high to low (8.94 km2) stability after the construction of the Cuijiaying Dam. Furthermore, the cascade hydropower dam construction resulted in increased fluctuations in downstream water discharge. This study provides an effective approach to understanding the impact of cascade hydropower dams on the inundation process of floodplain wetlands.

An artificial intelligence method for predicting postoperative urinary incontinence based on multiple anatomic parameters of MRI.

Background: Deep learning methods are increasingly applied in the medical field; however, their lack of interpretability remains a challenge. Captum is a tool that can be used to interpret neural network models by computing feature importance weights. Although Captum is an interpretable model, it is rarely used to study medical problems, and there is a scarcity of data regarding MRI anatomical measurements for patients with prostate cancer after undergoing Robotic-Assisted Radical Prostatectomy (RARP). Consequently, predictive models for continence that use multiple types of anatomical MRI measurements are limited. Methods: We explored the energy efficiency of deep learning models for predicting continence by analyzing MRI measurements. We analyzed and compared various statistical models and provided reference examples for the clinical application of interpretable deep-learning models. Patients who underwent RARP at our institution between July 2019 and December 2020 were included in this study. A series of clinical MRI anatomical measurements from these patients was used to discover continence features, and their impact on continence was primarily evaluated using a series of statistical methods and computational models. Results: Age and six other anatomical measurements were identified as the top seven features of continence by the proposed model UINet7 with an accuracy of 0.97, and the first four of these features were also found by primary statistical analysis. Conclusions: This study fills the gaps in the in-depth investigation of continence features after RARP due to the limitations of clinical data and applicable models. We provide a pioneering example of the application of deep-learning models to clinical problems. The interpretability analysis of deep learning models has the potential for clinical applications.

Association Between Urinary Bisphenols and Body Composition Among American Adults: Cross-Sectional National Health and Nutrition Examination Survey Study.

BACKGROUND: Bisphenol A (BPA), bisphenol S (BPS), and bisphenol F (BPF) are widely used in various consumer products. They are environmental contaminants with estrogenic properties that have been linked to various health outcomes. Understanding their impact on body composition is crucial for identifying potential health risks and developing preventive strategies. However, most current studies have only focused on their relationship with BMI. OBJECTIVE: This study aimed to investigate the association between urinary levels of BPA, BPS, and BPF and body composition, including BMI, lean mass, and fat mass, in a large population-based sample. METHODS: We conducted a cross-sectional analysis using data from the National Health and Nutrition Examination Survey 2003-2016. Body composition data were assessed using dual-energy X-ray absorptiometry, which provided precise measurements of lean mass, fat mass, and other indicators. We used multivariate linear regression models to estimate the associations, adjusting for potential confounders such as age, gender, race, socioeconomic factors, and lifestyle variables. RESULTS: The results revealed significant associations between bisphenol exposure and body composition. After adjusting for covariates, BPS showed a positive association with BMI, with quartiles 3 and 4 having 0.91 (95% CI 0.34-1.48) and 1.15 (95% CI 0.55-1.74) higher BMI, respectively, compared with quartile 1 (P<.001). BPA was negatively associated with total lean mass (TLM) and appendicular lean mass, with quartiles 2, 3, and 4 having -7.85 (95% CI -11.44 to -4.25), -12.33 (95% CI -16.12 to -8.54), and -11.08 (95% CI -15.16 to -7.01) lower TLM, respectively, compared with quartile 1 (P<.001). BPS was negatively associated with TLM, with quartiles 3 (ß=-10.53, 95% CI -16.98 to -4.08) and 4 (ß=-11.14, 95% CI -17.83 to -4.45) having significantly lower TLM (P=.005). Both BPA and BPS showed a positive dose-response relationship with trunk fat (BPA: P=.002; BPS: P<.001) and total fat (BPA: P<.001; BPS: P=.01). No significant association was found between BPF and any body composition parameter. CONCLUSIONS: This large-sample study highlights the associations between urinary levels of BPA and BPS and alterations in body composition, including changes in lean mass, fat mass, and regional fat distribution. These findings underscore the importance of understanding the potential health risks associated with bisphenol exposure and emphasize the need for targeted interventions to mitigate adverse effects on body composition.

Fabrication of 3D printed Ca3Mg3(PO4)4-based bioceramic scaffolds with tailorable high mechanical strength and osteostimulation effect.

Calcium, magnesium and phosphate are predominant constituents in the human bone. In this study, magnesium-calcium phosphate composite bioceramic scaffolds were fabricated utilizing Mg3(PO4)2 and ß-Ca3(PO4)2 as starting materials, and their pore structure was constructed by 3D printing. The porosity and compressive strength of the composite bioceramic scaffolds could be adjusted by altering the sintering temperature and the formula of starting materials. The composite bioceramic scaffolds prepared from 60 wt% Mg3(PO4)2 and 40 wt% ß-Ca3(PO4)2 were dominated by the Ca3Mg3(PO4)4 phase, and this Ca3Mg3(PO4)4-based bioceramic scaffolds possessed the highest compressive strength (12.7 - 92.4 MPa). Moreover, the Ca3Mg3(PO4)4-based bioceramic scaffolds stimulated cellular growth and osteoblastic differentiation of bone marrow stromal cells. The Ca3Mg3(PO4)4-based bioceramic scaffolds as bone regenerative biomaterials are flexible to the requirement of bone defects at various sites.

Guar gum-based multilayer fiber membranes inspired by plant transpiration for enhancing the functionality of dry facial masks.

As more eco-friendly and economical choice for wet facial masks, dry facial masks have always had the problem of cumbersome application process and poor water retention property. In this study, based on the mechanism of directional water transport of Janus membrane and plant transpiration, the hydrophobic polylactic acid (PLA) nanofiber layer and the superhydrophilic guar gum (GG) nanofiber layer were prepared on both sides of the silk facial mask (SM) by electrospinning to obtain the guar gum-based bionic Janus directional water transport facial mask (G-DFM). The results showed that the directional water transport function improved the facial mask's water retention by 37 %, and the nicotinamide (NAM) encapsulated in the GG layer gave the facial mask excellent whitening and antibacterial properties. The GG layer could be directed to swell after absorbing water to form the "gel-like", which ensured that the G-DFM could continue to release NAM during its work and would enhance the attachment between the G-DFM and the skin. G-DFM not only retained the advantages of SM but also expanded the functions that SM did not have, providing an idea for designing more practical and ideal facial masks in the future.

Associations between combinations of 24-h movement behaviors and physical fitness among Chinese adolescents: Sex and age disparities.

OBJECTIVE: To analyze the relationship between 24-h movement behaviors and adolescents' physical fitness, with sex difference and age disparity explored specifically. METHODS: A total of 135 852 Chinese adolescents aged 13-22 years were included in this cross-sectional study. Self-reported 24-h movement behavioral times, including moderate to vigorous physical activity (MVPA), recreational screen, and sleep, were identified as meeting guidelines based on Canadian recommendations. Physical fitness indicator (PFI) was calculated through sex- and age-specific z scores of body mass index, forced vital capacity, 50 m dash, sit-and-reach, standing long jump, body muscle strength, and endurance running, and then classified as: low level (<20th), middle level (20th-80th), and high level (>80th). Mixed effect logistic regression was applied to analyze the association, and interaction terms were constructed to prove the sex and age disparities. RESULTS: Only 12.4% of adolescents aged 13-22 years met all three recommendations. The number of meeting guidelines exhibited a typical dose-response relationship with high level PFI (OR = 1.22 [95% CI: 1.19-1.25]), and in detail, meeting MVPA + recreational screen (OR = 2.29 [95% CI: 2.09-2.51]) or MVPA-only (OR = 2.16 [95% CI: 1.93-2.41]) guidelines were better associated with high-level PFI. Besides, meeting MVPA-only guideline was proved with stronger association with high-level PFI for boys (p-interaction = 0.005). The dose-response relationship in boys of the number of guidelines met with PFI was stronger in 19- to 22-year-olds (p-interaction <0.001) and 16- to 18-year-olds (p-interaction = 0.001) than that in 13- to 15-year-olds. CONCLUSION: The prevalence of meeting 24-h movement behaviors guidelines among Chinese adolescents aged 13-22 years was relatively low. It was associated with adolescents' physical fitness, with meeting MVPA + recreational screen or MVPA-only guidelines bringing greater benefits, and sex difference and age disparity existing.