RESUMEN
Heavy metal migration in soil poses a serious threat to the soil and groundwater. Understanding the migration pattern of heavy metals (HMs) under different factors could provide a more reasonable position for pollution evaluation and targetoriented treatment of soil heavy metal. In this study, the migration behavior of Pb and Cd in co-contaminated soil under different pH and ionic strength (NaCl concentration) was simulated using convective dispersion equation (CDE). We predicted the migration trends of Pb and Cd in soils after 5, 10, and 20 years via PHREEQC. The results showed that the migration time of Cd in the soil column experiment was about 60 days faster than that of Pb, and the migration trend was much steeper. The CDE was proved to describe the migration behavior of Pb and Cd (R2 > 0.75) in soil. The predicted results showed that Cd migrated to 15-20 cm of soil within 7 years and Pb stayed mainly in the top 0-6 cm of soil within 5 years as the duration of irrigation increased. Overall, our study is expected to provide new insight into the migration of heavy metal in soil ecosystems and guidance for reducing risk of heavy metal in the environment.
RESUMEN
Recently, perovskite solar cells (PSCs) based on quasi-two-dimensional (quasi-2D) perovskites have drawn more attention due to their excellent stability, although their efficiencies are still lower than those of 3D ones. Here we applied post-treatment of 2D perovskite GAMA5Pb5I16 (GA = guanidinium, MA = methylammonium) films with acetaminophen (AMP) to improve their performance. The efficiency of the solar cells with 2 mg/mL AMP post-treatment increased to 18.01% from 16.72% for those without post-treatment. The efficiency improvement results from the enlarged grain size, reduced trap state density, and better energy level matching after AMP post-treatment. In addition, the stability of the solar cells is improved. The solar cells with AMP post-treatment maintain 91% of the original power conversion efficiency value after aging for 30 days in the atmosphere. This work opens a new approach for the efficiency and stability enhancement of quasi-2D PSCs.
RESUMEN
Poor stability retards the industrialization of perovskite solar cells (PSCs). One of the effective ways to solve this issue is to modify the perovskite surface to improve the efficiency and stability of the PSCs. Herein, we synthesized CuFeS2 nanocrystals and applied them to modify the perovskite surface. The efficiency of the PSCs with CuFeS2 modification is improved to 20.17% from 18.64% for the control devices. Some investigations demonstrate that the CuFeS2 modification passivates the perovskite surface defects and induces better energy band arrangement. Furthermore, the stability of the PSCs with CuFeS2 modification is improved compared with the devices without CuFeS2 modification. The efficiency of the PSCs with CuFeS2 modification maintains 93% of its initial value, whereas that of the devices without CuFeS2 modification decreases to 61% of the initial value. This work demonstrates that CuFeS2 is a novel material used as a modification layer to enhance the efficiency and stability of the PSCs.
RESUMEN
Potentially toxic elements (PTEs) in the dustfall-soil-crop system pose a serious threat to the ecological environment and agricultural production. However, there is still a knowledge gap in terms of better understanding the distinctive sources of PTEs by integrating various models and technologies. In this study, we comprehensively investigated the concentrations, distribution, and sources of seven PTEs in a dustfall-soil-crop system (424 samples in total) near a typical non-ferrous mining area, using absolute principal component score/multiple linear regression (APCS/MLR) combined with X-ray diffraction (XRD) and microscopy techniques. Our results showed that the mean values of As, Cd, Cr, Cu, Ni, Pb, and Zn in the soils were 211, 14, 105, 91, 65, 232, and 325 mg/kg, respectively. These values were significantly higher than the background soil values in Yunnan. Except for Ni and Cr, all elements in the soil were significantly higher than the screening values of agricultural lands in China. The spatial distribution of PTE concentrations was similar among the three media. The ACPS/MLR, XRD, and microscopy analyses further indicated that soil PTEs mainly originated from industrial activities (37 %), vehicle emissions and agricultural activities (29 %), respectively. Dustfall PTEs mainly originated from vehicle emissions and industrial activities, accounting for 40 % and 37 %, respectively. Crop PTEs mainly originated from vehicle emissions and soil (57 %), and agricultural activities (11 %), respectively. PTEs seriously threaten the safety of agricultural products and the ecological environment once they settle from the atmosphere to soil and crop leaves, further accumulate in crops, and spread through the food chain. Therefore, our study provides scientific evidence for government regulators to control PTE pollution and reduce their environmental risks in dustfall-soil-crop systems.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Suelo , Metales Pesados/análisis , China , Emisiones de Vehículos/análisis , Monitoreo del Ambiente/métodos , Contaminantes del Suelo/análisis , Medición de RiesgoRESUMEN
More accurate source analysis of potentially toxic elements (PTEs) in atmospheric fallout that endanger biodiversity and human health remains needed. This study determined the concentrations of seven PTEs, including Pb, Cd, As, Cu, Zn, Ni, and Cr, by inductively coupled plasma mass spectrometry (ICP-MS), and the sources of PTE pollution were quantified using multivariate statistical analysis, including principal component analysis (PCA), cluster analysis (CA), and Pearson correlation analysis, and Moran index was applied for mutual verification and supplementation. PCA and CA revealed that the same mixed sources of Pb, Cd, As, Cu, and Zn were found in the atmospheric dust fall in the study area, while Ni and Cr had the same source of pollution. Pearson correlation analysis provided that there were strong correlations between Pb-Cd, Pb-As, Pb-Cu, Cd-As, Cd-Cu, As-Cu, and Ni-Cr, indicating commonality between the two sources of heavy metal pollution. Additionally, the Moran index showed that strong spatial correlations were observed between Pb, Cd, As, Cu, and Zn, whose sources were mainly related to non-ferrous metal processing smelter smelting slag sites and an environmental company in the study area. However, no spatial correlation was found between Ni and Cr, which mainly originated from the local geological background.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Humanos , Monitoreo del Ambiente/métodos , Cadmio/análisis , Plomo/análisis , Medición de Riesgo , Metales Pesados/análisis , China , Contaminantes del Suelo/análisis , Suelo/químicaRESUMEN
In this paper, N-doped TiO2 (N-TiO2) nanorod arrays were synthesized with hydrothermal method, and perovskite solar cells were fabricated using them as electron transfer layer. The solar cell performance was optimized by changing the N doping contents. The power conversion efficiency of solar cells based on N-TiO2 with the N doping content of 1% (N/Ti, atomic ratio) has been achieved 11.1%, which was 14.7% higher than that of solar cells based on un-doped TiO2. To get an insight into the improvement, some investigations were performed. The structure was examined with X-ray powder diffraction (XRD), and morphology was examined by scanning electron microscopy (SEM). Energy dispersive spectrometer (EDS) and Tauc plot spectra indicated the incorporation of N in TiO2 nanorods. Absorption spectra showed higher absorption of visible light for N-TiO2 than un-doped TiO2. The N doping reduced the energy band gap from 3.03 to 2.74 eV. The photoluminescence (PL) and time-resolved photoluminescence (TRPL) spectra displayed the faster electron transfer from perovskite layer to N-TiO2 than to un-doped TiO2. Electrochemical impedance spectroscopy (EIS) showed the smaller resistance of device based on N-TiO2 than that on un-doped TiO2.
RESUMEN
The vitamin B12 molecule has long fascinated chemists because of its exclusive complex structure and unusual reactivities in biological systems. In order to achieve a better understanding of the structural attribute of the Vitamin B12 molecule when it interacted with metal, in the present paper, the vitamin B12 molecules adsorbed on variation of copper electrode potential from 0 to -1.0 V was studied by surface-enhanced Raman spectroscopy (SERS). An excellent SERS substrate was obtained with insitu electrochemical oxidation-reduction cycle (ORC), and its surface roughness was characterized by atomic force microscope (AFM). Assignments of Raman peaks observed by normal Raman spectrum (NRS) and SERS spectra of vitamin B12 molecule were given based on previous literatures. It was found that the potential-dependent relative intensity changed in SERS spectra which depended on the vitamin B12 molecular orientation with respect to the copper surface according to the surface selection rule (SSR). It was concluded that the corrin ring was adsorbed in tilt form on copper surface and the Co-CN group was farther away from the copper surface at higher potentials. With the decrease in potential, the tilt angle between the corrin ring and copper surface became smaller, then the Co-N group and 5,6 dimethylbenzimidazole group got close to the copper surface. The results offered an important structural attribute of vitamin B12 molecule when it interacted with copper electrode for the first time, and supplied a meaningful reference for the electrochemical bioactivity of the vitamin B12 molecule.
Asunto(s)
Espectrometría Raman , Vitamina B 12/análisis , Adsorción , Cobre , Electrodos , Oxidación-Reducción , Propiedades de SuperficieRESUMEN
The images of post atmospheric correction reflectance (PAC), top of atmosphere reflectance (TOA), and digital number (DN) of a SPOT5 HRG remote sensing image of Nanjing, China were used to derive four vegetation indices (VIs), i. e., normalized difference vegetation index (NDVI), transformed vegetation index (TVI), soil-adjusted vegetation index (SAVI), and modified soil-adjusted vegetation index (MSAVI), and 36 VI-VFC relationship models were established based on these VIs and the VFC data obtained from ground measurement. The results showed that among the models established, the cubic polynomial models based on NDVI and TVI from PAC were the best, followed by those based on SAVI and MSAVI from DN, with the accuracy being slightly higher than that of the former two models when VFC > 0.8. The accuracy of these four models was higher in middle-densely vegetated areas (VFC = 0.4-0.8) than in sparsely vegetated areas (VFC = 0-0.4). All the established models could be used in other places via the introduction of calibration models. In VI-VFC modeling, using VIs derived from different radiometric correction levels of remote sensing image could help mining valuable information from remote sensing image, and thus, improving the accuracy of VFC estimation.