RESUMEN
Zinc (Zn) metal anodes suffer from the dendrite growth and hydrogen evolution reaction (HER) in classical aqueous electrolytes, which severely limit their lifespan. We propose a rational design of AgxZny protective coatings with selective binding to Zn2+ against H+ to simultaneously regulate the Zn growth pattern and the HER kinetics. We further demonstrate that by tuning the composition of the AgxZny coating the Zn deposition behavior can be readily tuned from the conventional plating/stripping (on Zn-AgZn3 coating) to alloying/dealloying (on Ag-AgZn coating), resulting in precise control of the Zn growth pattern. Moreover, the synergy of Ag and Zn further suppresses the competitive HER. As a result, the modified Zn anodes possess a significantly enhanced lifespan. This work provides a new strategy for enhancing the stability of Zn and potentially other metal anodes by precisely manipulating the binding strength of protons and metal charge carriers in aqueous batteries.
RESUMEN
Fe2O3 is one of the most common anode materials beyond carbons but suffers from unsatisfactory capacity and poor stability, which are associated with the insufficient utilization of active material and the structural instability caused by the phase transformation. In this work, we report an effective strategy to overcome the above issues through electronic structure optimization by constructing delicately designed Fe2O3@VN core-shell structure. The Fe2O3@VN/CC exhibits a much higher areal capacity of 254.8 mC cm-2 at 5 mA cm-2 (corresponding to 318.5 mF cm-2, or 265.4 F g-1) than the individual VN (48 mC cm-2, or 60 mF cm-2) or Fe2O3/CC (93.36 mC cm-2, or 116.7 mF cm-2), along with enhanced stability. Moreover, the assembled asymmetric supercapacitor devices based on Fe2O3@VN/CC anode and RuO2/CC cathode show a high stack energy density of 0.5 mWh cm-3 at a power density of 12.28 mW cm-3 along with good stability (80% capacitance retention after 14000 cycles at 10 mA cm-2). This work not only establishes the Fe2O3@VN as a high-performance anode material but also suggests a general strategy to enhance the electrochemical performance of traditional anodes that suffer from low capacity (capacitance) and poor stability.
RESUMEN
Secondary aqueous zinc-ion batteries (ZIBs) are considered as one of the promising energy storage devices, but their widespread application is limited by the Zn dendrite issues. In this work, we propose a rational design of surface protective coatings to solve this problem. Specifically, a silver (Ag) nanoparticle embedded amorphous AlN matrix (AlN/Ag) protective layer is developed. The former would alloy in situ with Zn to form AgZn3 alloy sites, which subsequently induce the Zn deposition with preferred (002) facets. The latter can effectively alleviate the structural expansion during repeated Zn plating/stripping. Consequently, the delicately designed AlN/Ag@Zn anode delivers an enhanced stability with a long lifespan of more than 2600 h at 1 mA cm-2 and 1 mAh cm-2. Moreover, the AlN/Ag@Zn||Mn1.4V10O24·nH2O full batteries can be operated for over 8000 cycles under 5 A g-1. Our work not only suggests a promising Zn anode protective coating but also provides a general strategy for the rational design of surface protective layers for metal anodes.
RESUMEN
Rechargeable zinc-ion batteries (ZIBs) have shown great potential as an alternative to lithium-ion batteries. The ZIBs utilize Zn metal as the anode, which possesses many advantages such as low cost, high safety, eco-friendliness, and high capacity. However, on the other hand, the Zn anode also suffers from many issues, including dendritic growth, corrosion, and passivation. These issues are largely related to the surface and interface properties of the Zn anode. Many efforts have therefore been devoted to the modification of the Zn anode, aiming to eliminate the above-mentioned problems. This review gives a comprehensive summary on the mechanism behind these issues as well as the recent progress on Zn anode modification with focus on the strategies of surface and interface engineering, covering the design and application of both the Zn anode supports and surface protective layers, along with abundant examples. In addition, the promising research directions and perspective on these strategies are also presented.
RESUMEN
The uncontrolled zinc dendrite growth during plating leads to quick battery failure, which hinders the widespread applications of aqueous zinc-ion batteries. The growth of Zn dendrites is often promoted by the "tip effect". In this work, we propose a generate strategy to eliminate the "tip effect" by utilizing the electrostatic shielding effect, which is achieved by coating Zn anodes with magnetron sputtered Al-based alloy protective layers. The Al can form a surface insulating Al2O3 layer and by manipulating the Al content of Zn-Al alloy films, we are able to control the strength of the electrostatic shield, therefore realizing a long lifespan of Zn anodes up to 3000 h at a practical operating condition of 1.0 mA cm-2 and 1.0 mAh cm-2. In addition, the concept can be extended to other Al-based systems such as Ti-Al alloy and achieve enhanced stability of Zn anodes, demonstrating the generality and efficacy of our strategy.
