Photothermal switch by gallic acid-calcium grafts synthesized by coordination chemistry for sequential treatment of bone tumor and regeneration.

The residual bone tumor and defects which is caused by surgical therapy of bone tumor is a major and important problem in clinicals. And the sequential treatment for irradiating residual tumor and repairing bone defects has wildly prospects. In this study, we developed a general modification strategy by gallic acid (GA)-assisted coordination chemistry to prepare black calcium-based materials, which combines the sequential photothermal therapy of bone tumor and bone defects. The GA modification endows the materials remarkable photothermal properties. Under the near-infrared (NIR) irradiation with different power densities, the black GA-modified bone matrix (GBM) did not merely display an excellent performance in eliminating bone tumor with high temperature, but showed a facile effect of the mild-heat stimulation to accelerate bone regeneration. GBM can efficiently regulate the microenvironments of bone regeneration in a spatial-temporal manner, including inflammation/immune response, vascularization and osteogenic differentiation. Meanwhile, the integrin/PI3K/Akt signaling pathway of bone marrow mesenchymal stem cells (BMSCs) was revealed to be involved in the effect of osteogenesis induced by the mild-heat stimulation. The outcome of this study not only provides a serial of new multifunctional biomaterials, but also demonstrates a general strategy for designing novel blacked calcium-based biomaterials with great potential for clinical use.

An update on the role of ferroptosis in the pathogenesis of osteoporosis.

Ferroptosis is a novel form of programmed cell death, distinguished from apoptosis, autophagy, and programmed necrosis and has received much attention since it was defined in 2012. Ferroptotic cells physiologically exhibit iron metabolism dysregulation, oxidative stress, and lipid peroxidation. Morphologically, they show plasma membrane disruption, cytoplasmic swelling, and mitochondrial condensation. Osteoporosis is taken more and more seriously as the proportion of the aging population continues to increase globally. Interestingly, ferroptosis has been demonstrated to be involved in the development and progression of osteoporosis in many extant studies. The review summarizes iron metabolism, lipid peroxidation, and the different regulatory signals in ferroptosis. Changes in signaling mechanisms within osteoblasts, osteoclasts, and osteocytes after ferroptosis occur are explained here. Studies showed ferroptosis play an important role in different osteoporosis models (diabetes osteoporosis, postmenopausal osteoporosis, glucocorticoid-induced osteoporosis). Inhibitors and EC (Exos) targeting ferroptosis could ameliorate bone loss in osteoporotic mice by protecting cells against lipid peroxidation. Shortly, we hope that more effective and appropriate clinical therapy means will be utilized in the treatment of osteoporosis.

Natural Affinity Driven Modification by Silicene to Construct a "Thermal Switch" for Tumorous Bone Loss.

Tumorous bone defects present significant challenges for surgical bio-reconstruction due to the dual pathological conditions of residual tumor presence and extensive bone loss following excision surgery. To address this challenge, a "thermal switch" smart bone scaffold based on the silicene nanosheet-modified decalcified bone matrix (SNS@DBM) is developed by leveraging the natural affinity between collagen and silicene, which is elucidated by molecular dynamics simulations. Benefitting from its exceptional photothermal ability, biodegradability, and bioactivity, the SNS@DBM "thermal switch" provides an integrated postoperative sequential thermotherapy for tumorous bone loss by exerting three levels of photothermal stimulation (i.e., strong, moderate, and nonstimulation). During the different phases of postoperative bioconstruction, the SNS@DBM scaffold realizes simultaneous residual tumor ablation, tumor recurrence prevention, and bone tissue regeneration. These biological effects are verified in the tumor-bearing nude mice of patient-derived tissue xenografts and critical cranium defect rats. Mechanism research prompts moderate heat stimulus generated by and coordinating with SNSs can upregulate osteogenic genes, promote macrophages M2 polarization, and intensify angiogenesis of H-type vessels. This study introduces a versatile approach to the management of tumorous bone defects.

In vitro and in vivo biocompatibility assessment of chalcogenide thermoelectrics as implants.

The ability of thermoelectric materials to generate electricity in response to local temperature gradients makes them a potentially promising solution for the regulation of cellular functions and reconstruction of tissues. Biocompatibility of implants is a crucial attribute for the successful integration of thermoelectric techniques in biomedical applications. This work focuses on the in vitro and in vivo evaluation of biocompatibility for 12 typical chalcogenide thermoelectrics, which are composed of biocompatible elements. Ag2Se, SnSe, Bi2Se3, Bi2Te2.88Se0.12 and Bi2Te3, each with a released ion concentration lower than 10 ppm in extracts, exhibited favorable biocompatibility, including cell viability, adhesion, and hemocompatibility, as observed in initial in vitro assessments. Moreover, in vivo biocompatibility assessment, achieved by hematological and histopathological analyses in the rat subcutaneous model, further substantiated the biocompatibility of Ag2Se, Bi2Se3, and Bi2Te3, with each possessing superior thermoelectric performance at room temperature. This work offers robust evidence to promote Ag2Se, Bi2Se3, and Bi2Te3 as potential thermoelectric biomaterials, establishing a foundation for their future applications in biomedicine.

Cut-off points for knee extension strength: identifying muscle weakness in older adults.

PURPOSE: Generalized muscle weakness is the primary characteristic of sarcopenia. Handgrip strength (HGS) is widely employed to detect muscle weakness. However, knee extension strength (KES) declines much earlier and more pronounced than HGS, and there is a stronger correlation between KES and functional performance. Therefore, KES may be a more appropriate proxy for identifying muscle weakness compared to HGS. The purpose of this review was to clarify the KES measurement towards a standardized approach and summarize the cut-off points for KES. METHODS: A literature search was conducted in Web of Science, PubMed, Elsevier, Scopus and Medline databased up to July 10th, 2023. RESULTS: A total of 12 articles were ultimately included in this review, which proposed various cut-off points for KES. Notably, these studies exhibited high heterogeneities, including diverse living settings for participants, KES measurement, methods for KES normalization, methodologies for determining cut-off points and study designs. CONCLUSIONS: No consensus on cut-off points for KES was reached due to the heterogeneities in KES measurement and normalized methods among studies. To enhance the comparability among studies and facilitate the sarcopenia screening framework, a standardized approach for KES measurement and KES normalization are needed. Regarding KES measurement, the hand-held dynamometer-based isometric KES is easy to access and ideally suited for both clinical and community settings, while isokinetic KES, representing the gold standard, is preferred for research settings. Additionally, it is suggested to normalize isometric KES to body weight (BW), while normalizing isokinetic KES to allometrically scaled BW.

Neuromuscular electrical stimulation improves frontal ankle motor control in individuals with chronic ankle instability during drop-landing.

OBJECTIVE: This study investigated the effect of neuromuscular electrical stimulation (NMES) on the frontal ankle motor control in individuals with chronic ankle instability (CAI) during drop-landing. DESIGN: This was a randomized, controlled, double-blind trial. Thirty-six individuals with CAI were randomly assigned to each group. Participants received 6-week NMES intervention and sham stimulation in the NMES and control groups, respectively. Data was collected at week0 and week6. A mixed-effects model and analysis of covariance were employed to investigate the between-group differences in continuous and discrete outcome variables at week6, with the outcome variables at week0 as covariates. RESULTS: Compared to control group, NMES group exhibited a 2.66° (2.45, 2.86) reduction in frontal ankle inversion angle, a 47.41°/s (-16.05, -78.77) decrease in peak ankle inversion angular velocity, and a 0.43 Nm/kg (0.18, 0.68) increase in peak ankle eversion moment during drop-landing at week6. CONCLUSION: Applying 6-week NMES to the fibularis longus resulted in decreased ankle inversion angle and ankle inversion angular velocity, and increased peak ankle eversion moment during drop-landing. Consequently, NMES could be considered an effective modality for individuals with CAI to enhance the frontal ankle movement patterns and overall ankle motor control.

Metal-Phenolic Networks-Reinforced Extracellular Matrix Scaffold for Bone Regeneration via Combining Radical-Scavenging and Photo-Responsive Regulation of Microenvironment.

The limited regulation strategies of the regeneration microenvironment significantly hinder bone defect repair effectiveness. One potential solution is using biomaterials capable of releasing bioactive ions and biomolecules. However, most existing biomaterials lack real-time control features, failing to meet high regulation requirements. Herein, a new Strontium (Sr) and epigallocatechin-3-gallate (EGCG) based metal-phenolic network with polydopamine (PMPNs) modification is prepared. This material reinforces a biomimetic scaffold made of extracellular matrix (ECM) and hydroxyapatite nanowires (nHAW). The PMPNs@ECM/nHAW scaffold demonstrates exceptional scavenging of free radicals and reactive oxygen species (ROS), promoting HUVECs cell migration and angiogenesis, inducing stem cell osteogenic differentiation, and displaying high biocompatibility. Additionally, the PMPNs exhibit excellent photothermal properties, further enhancing the scaffold's bioactivities. In vivo studies confirm that PMPNs@ECM/nHAW with near-infrared (NIR) stimulation significantly promotes angiogenesis and osteogenesis, effectively regulating the microenvironment and facilitating bone tissue repair. This research not only provides a biomimetic scaffold for bone regeneration but also introduces a novel strategy for designing advanced biomaterials. The combination of real-time photothermal intervention and long-term chemical intervention, achieved through the release of bioactive molecules/ions, represents a promising direction for future biomaterial development.

Rehabilitation exercise-driven symbiotic electrical stimulation system accelerating bone regeneration.

Electrical stimulation can effectively accelerate bone healing. However, the substantial size and weight of electrical stimulation devices result in reduced patient benefits and compliance. It remains a challenge to establish a flexible and lightweight implantable microelectronic stimulator for bone regeneration. Here, we use self-powered technology to develop an electric pulse stimulator without circuits and batteries, which removes the problems of weight, volume, and necessary rigid packaging. The fully implantable bone defect electrical stimulation (BD-ES) system combines a hybrid tribo/piezoelectric nanogenerator to provide biphasic electric pulses in response to rehabilitation exercise with a conductive bioactive hydrogel. BD-ES can enhance multiple osteogenesis-related biological processes, including calcium ion import and osteogenic differentiation. In a rat model of critical-sized femoral defects, the bone defect was reversed by electrical stimulation therapy with BD-ES and subsequent bone mineralization, and the femur completely healed within 6 weeks. This work is expected to advance the development of symbiotic electrical stimulation therapy devices without batteries and circuits.

Comparative study of three different fixation techniques for the treatment of Neer type IIb distal clavicle fractures: A retrospective cohort study.

Background: Recently, a locking plate (LP) combined with a suture button was applied for distal clavicle Neer type IIb fractures. However, to our knowledge, there is limited information on clinical outcomes surrounding locking plates combined with a suture button in the treatment of Neer type IIb distal clavicle fractures. The aim of this study was to compare the outcomes among three different fixation techniques for the treatment of Neer type IIb distal clavicle fractures. Methods: We performed a retrospective cohort study of 53 patients with Neer type IIb distal clavicle fractures who were treated with a hook plate (HP group, 16 patients), a locking plate alone (LP group, 18 patients), or a locking plate with a suture button (LPSB group, 19 patients) in our hospital between March 2014 and August 2019. The clinical and radiological outcomes were evaluated, including union time, postoperative complications, and function of the shoulder joint. Results: The follow-up period was at least 2 years for all patients. All patients in the LPSB group achieved bone healing at the final follow-up. No significant differences were observed, including age, sex, side, time to surgery, duration of surgery, and mean follow-up period among the three groups (p > 0.05). The union time was shorter in the LPSB group than in the other two groups (p < 0.05). Postoperative complications were lower in the LPSB group than in the other two groups (p < 0.05). The visual analog scale score and Constant-Murley score in the LPSB group were better than those in the other groups at 3 and 6 months postoperatively (p < 0.05). Conclusion: Compared with HP and LP alone, LPSB yields better clinical outcomes and lower complication rates in the treatment of Neer type IIb distal clavicle fractures.

Treatment of acetabular fracture involving anterior and posterior columns using a single pararectus approach: surgical experience and preliminary results.

PURPOSE: This study aims to evaluate the efficacy of single pararectus approach in patients confirmed with acetabular fracture involving anterior and posterior columns. METHODS: A total of 58 patients confirmed with acetabular fracture involving anterior and posterior columns and treated at our hospital between January 2015 and January 2020 were retrospectively analyzed. A single pararectus approach was applied for all patients. Routine X-rays were performed at follow-up of one, three, six, 12, and 18 months, and three-dimensional CT scans were added at six and 18 months. Fracture reduction quality was assessed using the Matta score system, and functional assessment used the Modified Merle D'Aubigné and Postel score system. Post-operative complications, including fat liquefaction and deep vein thrombosis, were recorded and analyzed. RESULTS: The median operation time was 186 min while the intra-operative blood loss was 421 mL. The rate of good-to-excellent reduction was 94.8%, and the rate of good-to-excellent hip function score reached 93.1%. Seven patients presented with post-operative complications, including three intra-operative small vascular injuries, two peritoneal small perforations, one fat liquefaction, and one deep vein thrombosis. CONCLUSION: Using a single pararectus approach is convenient and effective for treating acetabular fracture involving anterior and posterior columns, especially those involving the quadrilateral area. TRIAL REGISTRATION: ChiCTR, ChiCTR2100054604. Registered 21 December 2022. Retrospectively registered, http://www.chictr.org.cn/showproj.aspx?proj=144783 .

Intra-articular injection of placental mesenchymal stromal cells ameliorates pain and cartilage anabolism/catabolism in knee osteoarthritis.

Background: Knee Osteoarthritis (kOA), the most common joint degenerative disorder, lacks effective therapeutics. Placenta-derived mesenchymal stromal cells (PMSCs) are effective in tissue repairing and generation, which have potential in treating kOA. This study aimed to determine the anti-kOA efficacy of PMSCs and to explore its action mode. Methods: Flow cytometry and three-line differentiation were performed for identification of PMSCs. In vivo, a rat kOA model established by anterior cruciate ligament transection (ACLT) surgery was used to evaluate the efficacy of PMSCs. Histopathological HE and SO staining with Osteoarthritis Research Society International scoring were conducted, and cartilage expressions of MMP13 and Col2 were measured by immunohistochemistry. Pain behavior parameters by mechanical withdrawal threshold (MWT) and thermal withdrawal latency (TWL), were measured. In vitro, wound healing and cell immunofluorescence assays were conducted to detect the proliferation and migration ability of chondrocytes treated with PMSCs conditioned medium (PMSCs-CM). Quantitative real-time PCR (qRT-PCR) and Western blot (WB) assays were applied to explore the molecular action of PMSCs on chondrocytes. Results: The results of flow cytometry indicated that the surface markers of PMSCs (CD73 > 95%, CD90 > 95%, and CD34 < 2%) were consistent with the typical mesenchymal stromal cells. The in vivo data showed that PMSCs significantly reversed the kOA progression by protection of cartilage, regulation of anabolic (Col2) and catabolic (MMP13) expressions, and relief of pain symptoms. The in vitro data showed that PMSCs promoted chondrocyte proliferation and migration and significantly restored the IL-1ß-induced abnormal gene expressions of Col2, Mmp13, Adamts4, Adamts5 and Sox9 and also restored the abnormal protein expressions of Col2, Mmp13 and Sox9 of chondrocytes. The molecular actions of PMSCs on chondrocytes in nested co-culture way or in conditioned medium way were similar, confirming a paracrine-based mode of action. Conclusion: This study demonstrated PMSCs' anti-kOA efficacy and its paracrine-based action mode, providing novel knowledge of PMSCs and suggesting it as a promising cell therapy for treatment of kOA.

[A multicenter retrospective study assessing pelvic unlocking closed reduction device for reducing unstable pelvic posterior ring disruption].

Objective: To explore the application value and effectiveness of pelvic unlocking closed reduction device for the treatment of unstable pelvic posterior ring disruption. Methods: A retrospective analysis of clinical data of 243 cases of unstable pelvic posterior ring disruption treated with pelvic unlocking closed reduction device in 13 orthopaedic trauma centers across the country between December 2018 and June 2020 was performed. There were 139 males and 104 females; the age ranged from 18 to 92 years, with an average age of 48.5 years. The cause of injury included 132 cases of traffic accident injuries, 102 cases of falling from height, and 9 cases of crushing injuries. According to AO/Orthopaedic Trauma Association (AO/OTA) classification, there were 5 cases of type 61-B1, 13 cases of type 61-B2, 32 cases of type 61-C1.1, 47 cases of type 61-C1.2, 89 cases of type 61-C1.3, 35 cases of type 61-C2, and 22 cases of type 61-C3. The time from injury to operation was 2-121 days, with a median of 10 days. Preoperative preparation time, installation time of unlocking closed reduction device, fracture reduction time, intraoperative fluoroscopy times, intraoperative blood loss, and surgical complications were recorded, and Matta scoring standard was used to evaluate the quality of fracture reduction. According to Matta evaluation results, the patients were divided into two subgroups: excellent-good group and fair-poor group. The differences in gender, age, time from injury to operation, AO/OTA classification, and perioperative clinical indicators were compared between the two groups, and the effects of baseline data and perioperative indicators on the quality of fracture reduction were studied. Results: Pelvic unlocking closed reduction device did not interfere with the display of the pelvic structure and fracture displacement direction during the intraoperative fluoroscopy, effectively correcting the displacement of the pelvic ring. The preoperative preparation time was 17-60 minutes, with an average of 30 minutes; installation time of unlocking closed reduction device was 10-32 minutes, with an average of 21 minutes; intraoperative fracture reduction time was 15-205 minutes, with an average of 49.2 minutes; intraoperative fluoroscopy times were 41-420 times, with an average of 132 times; intraoperative blood loss was 40-1 500 mL, with an average of 71.5 mL. The reduction quality of pelvic fracture was evaluated according to Matta score immediately after operation. The results were excellent in 153 cases, good in 61 cases, fair in 24 cases, and poor in 5 cases. The excellent and good rate was 88.1%. Further subgroup analysis showed that there was no significant difference in other indexes ( P>0.05) between the excellent-good group and the fair-poor group except for the time from injury to operation and AO/OTA classification ( P<0.05). Among them, the excellent-good reduction rate was 92.2% (119/129) in patients with injury-to-operation time less than 10 days, and the fair-poor reduction rate was 25.7% (9/35) and 40.9% (9/22) in patients with AO/OTA 61-C2 and 61-C3 types, respectively. There was no surgery-related complication due to the application of the pelvic unlocked reduction device, no secondary iliac fractures, vascular, or nerve injuries, and postoperative CT showed that all channel screws were located in the osseous channel. Conclusion: The pelvic unlocking reduction device can effectively help to reduce the unstable pelvic posterior ring and maintain reduction, meet the needs of different projection angles of pelvic fracture with intraoperative C-arm fluoroscopy. The system facilitate the operation of pelvic reduction and precise fixation.

Calcium Phosphate-Based Biomaterials for Bone Repair.

Traumatic, tumoral, and infectious bone defects are common in clinics, and create a big burden on patient's families and society. Calcium phosphate (CaP)-based biomaterials have superior properties and have been widely used for bone defect repair, due to their similarities to the inorganic components of human bones. The biological performance of CaPs, as a determining factor for their applications, are dependent on their physicochemical properties. Hydroxyapatite (HAP) as the most thermally stable crystalline phase of CaP is mostly used in the form of ceramics or composites scaffolds with polymers. Nanostructured CaPs with large surface areas are suitable for drug/gene delivery systems. Additionally, CaP scaffolds with hierarchical nano-/microstructures have demonstrated excellent ability in promoting bone regeneration. This review focuses on the relationships and interactions between the physicochemical/biological properties of CaP biomaterials and their species, sizes, and morphologies in bone regeneration, including synthesis strategies, structure control, biological behavior, and the mechanisms of CaP in promoting osteogenesis. This review will be helpful for scientists and engineers to further understand CaP-based biomaterials (CaPs), and be useful in developing new high-performance biomaterials for bone repair.

[TiRobot-assisted surgery by O-arm navigation system for percutaneous minimally invasive treatment of posterior pelvic ring injury].

Objective: To evaluate the effectiveness of TiRobot-assisted surgery by O-arm navigation system for percutaneous minimally invasive treatment of posterior pelvic ring injury. Methods: The clinical data of 76 patients with posterior pelvic ring injury between January 2016 and June 2021 were retrospectively analyzed. Among them, 45 cases were treated with minimally invasive percutaneous sacroiliac screw fixation assisted by TiRobot and O-arm navigation system (study group), 31 cases were treated with minimally invasive percutaneous sacroiliac screw fixation under the guidance of C-arm X-ray machine (control group). There was no significant difference in gender, age, cause of injury, Tile classification, time from injury to operation between the two groups ( P>0.05). The operation time, intraoperative blood loss, the times of nail track adjustment, and intraoperative fluoroscopy times were recorded. The quality of fracture reduction was evaluated by Matta score. At last follow-up, Majeed score was used to evaluate the recovery of pelvic function. Results: A total of 72 screws were implanted in the study group, with a median of 1 (1, 2) screws per patient. In the control group, 47 screws were implanted, with a median of 1 (1, 2) screws per patient. There was no significant difference in the number of screws between the two groups ( Z=-0.392, P=0.695). The operation time, intraoperative blood loss, times of nail track adjustment, and intraoperative fluoroscopy times in the study group were significantly less than those in the control group ( P<0.05). All patients were followed up 6-24 months (mean, 14 months). No serious complications was found after operation and during follow-up. Matta score was used to evaluate the quality of fracture reduction at 1 week after operation, and there was no significant difference between the two groups ( Z=-1.135, P=0.256). At last follow-up, there was no significant difference of Majeed score between the two groups ( Z=-1.279, P=0.201). Conclusion: TiRobot-assisted surgery by O-arm navigation system is a reliable surgical method for the treatment of posterior pelvic ring injury, which can reduce the operation time and fluoroscopy times when compared with the traditional operation under the guidance of C-arm X-ray machine. The safety, accuracy, and efficiency of the operation were improved.

O-Arm-Navigated, Robot-Assisted Versus Conventional CT Guided Radiofrequency Ablation in Treatment of Osteoid Osteoma: A Retrospective Cohort Study.

Background: Osteoid osteoma is a common benign bone tumor, and clinically there is severe local pain that typically worsens at night. The conventional CT-guided radiofrequency ablation (RFA) was widely used in the treatment of osteoid osteoma (OO), which could result in some radiation-related and imprecise complications due to the overdose of radiation exposure. This study aimed to compare the surgical effect of robot-assisted RFA with O-arm navigation and conventional CT-guided RFA in the treatment of OO. Methods: Sixty-two patients who underwent robot-assisted RFA with O-arm navigation (Robot-RFA, n = 24) or CT-guided RFA (CT-RFA, n = 38) were included in this retrospective cohort study. The mean follow-up time was 23.3 months. The intra-operative data, primary technical success rate, visual analog scale (VAS), and post-operative complications were analyzed. Results: Primary technical success was obtained in 23 patients who had robot-assisted RFA, and 35 patients who had conventional CT-guided RFA. One patient in Robot-RFA group and three patients in CT-RFA group with pain recurrence received repeat-RFA and had a secondary success. Mean operation time and dose of radiation exposure were lower in Robot-RFA group than that in CT-RFA group. The Robot-RFA group took fewer K-wire adjustment times for each patient than the CT-RFA group. There was a statistically significant difference in the mean operation time, dose of radiation exposure, and K-wire adjustment times between the groups (p < 0.05). No complications associated with the procedure were reported in the two groups during the follow-up period. Conclusion: Robot-assisted RFA with O-arm navigation is a safer and more precise strategy in the treatment of osteoid osteoma with less operation time and radiation exposure compared with the conventional CT-guided radiofrequency ablation.

Donut-like MOFs of copper/nicotinic acid and composite hydrogels with superior bioactivity for rh-bFGF delivering and skin wound healing.

BACKGROUND: Skin injury and the resultant defects are common clinical problems, and usually lead to chronic skin ulcers and even life-threatening diseases. Copper, an essential trace element of human body, has been reported to promote the regeneration of skin by stimulating proliferation of endothelial cell and enhance angiogenesis. RESULTS: Herein, we have prepared a new donut-like metal-organic frameworks (MOF) of copper-nicotinic acid (CuNA) by a simple solvothermal reaction. The rough surface of CuNA is beneficial for loading/release basic fibroblast growth factor (bFGF). The CuNAs with/without bFGF are easily processed into a light-responsive composite hydrogel with GelMA, which not only show excellent mechanical properties, but also display superior biocompatibility, antibacterial ability and bioactivity. Moreover, in the in vivo full-thickness defect model of skin wound, the resultant CuNA-bFGF@GelMA hydrogels significantly accelerate the wound healing, by simultaneously inhibiting the inflammatory response, promoting the new blood vessels formation and the deposition of collagen and elastic fibers. CONCLUSIONS: Considering the superior biocompatibility, antibacterial ability and bioactivity, the CuNA and its composite light-responsive hydrogel system will be promising in the applications of skin and even other tissue regeneration.

Anterior positioning screw in proximal femoral plating restricts posterior tilt of retroverted femoral neck fractures: a retrospective cohort study.

BACKGROUND: Preoperative posterior tilt is a risk factor for fixation failure in femoral neck fractures. This study aimed to evaluate the configuration of anterior positioning screw in proximal femoral plating in the treatment of retroverted femoral neck fractures in terms of resisting posterior tilt. METHODS: We retrospectively analyzed patients with retroverted femoral neck fractures who were fixed by proximal femoral plating from January 2014 to August 2019. All patients were divided into two groups according to screw configuration: anterior long-threaded screw (ALTS, n = 36) and normally short-threaded screws (NTS, n = 46). Baseline characteristics were reviewed and radiological and clinical outcomes were analyzed. Logistic regression analysis was used to identify risk factors for developing posterior tilt. RESULTS: Age, gender, Garden classification, posterior comminution, and reduction quality showed no significant difference between the groups. Increased posterior tilt was lower in the ALTS group (3.2°, 2.1-4.3°) than that in the NTS group (5.3°, 4.2-8.3°) (p < 0.001), and the percentage of people with > 5° of posterior tilt was also lower in the ALTS group (5, 13.9% vs. 24, 52.2%; p < 0.001). Femoral neck shortening (FNS) was lower in the ALTS group (3.1 (2.1-4.7) mm vs. 4.3 (3.1-6.3) mm, p = 0.003), though not statistically significant when using 5 mm as the cut-off value. Harris Hip Score in the ALTS group was higher than that in the NTS group (87.0, 84.0-90.0 vs. 82.0, 76.0-84.5; p < 0.001). Postoperative complications including delayed union, nonunion, and avascular necrosis were comparable between the groups. Multivariable analysis identified posterior comminution (OR 15.9, 95% CI 3.6-70.3, p < 0.001), suboptimal reduction quality (OR 12.0, 95% CI 2.6-56.1, p = 0.002), and NTS configuration (reference: ALTS configuration) (OR 21.9, 95% CI 4.1-116.4, p < 0.001) as risk factors for developing posterior tilt. CONCLUSIONS: Configuration of anterior positioning screw in proximal femoral plating provides better resistance against posterior tilt in the fixation of retroverted femoral neck fractures. Also, posterior comminution, suboptimal reduction, and NTS configuration (reference: ALTS) are risk factors for developing posterior tilt. TRIAL REGISTRATION: The trial registration number was ChiCTR2000039482 .

Configuration of short- and long-threaded cannulated screws in proximal femoral plating decreases varus collapse of femoral neck fractures: A retrospective cohort study.

OBJECTIVES: Proximal femoral plating serves as a good alternative for the fixation of femoral neck fractures, but fixation loss still occurs. This study aimed to evaluate the effect of a hybrid configuration of short- and long-threaded cannulated screws in proximal femoral plating in terms of decreasing varus collapse of femoral neck fractures. MATERIALS AND METHODS: We retrospectively analyzed 86 patients with femoral neck fractures who were fixed by proximal femoral plating from January 2015 to June 2019. These patients were divided into two groups according to screw configuration: short- and long-threaded cannulated screws (SLTS, n = 38) and short-threaded cannulated screws (STS, n = 48). Radiological and clinical outcomes including screw withdraw, nonunion, avascular necrosis, caput-collum-diaphysis (CCD) angle, amount of femoral neck shortening (FNS), and Harris Hip Score (HHS) were compared between the groups. RESULTS: Preoperative characteristics including age, gender, Garden type, duration of surgery, and reduction quality were not significantly different between the two groups (p > 0.05). Less decreased CCD angle was observed in the SLTS group (-0.4° (-1.4 - 1.8)) compared with that in the STS group (7.9° (6.3 - 11.0)) (p < 0.001). The SLTS group also presented with fewer amount of FNS (3.2 (2.7 - 3.8) mm vs. 5.1 (4.2 - 5.9) mm, p < 0.001). Bone union was achieved in all patients and no avascular necrosis was observed during the follow-up. The HHS was higher in the SLTS group (86.4 ± 5.1) than that in the STS group (81.5 ± 4.5) (p < 0.001). CONCLUSION: The hybrid configuration of short- and long-threaded screws in proximal femoral plating offers better resistance against varus collapse and yields better functional outcomes in femoral neck fractures.

Hybrid locked medial plating in dual plate fixation optimizes the healing of comminuted distal femur fractures: A retrospective cohort study.

OBJECTIVES: Dual plate fixation has been reported to be effective in the treatment of comminuted distal femur fractures (DFFs). However, optimized use of the medial plate and screws is less studied. This study aimed to evaluate the effect of a hybrid configuration of the medial plate in dual plate fixation of comminuted DFFs in promoting fracture healing. MATERIALS AND METHODS: We retrospectively analyzed 62 patients with comminuted DFFs (AO/OTA 33-A3/33-C2/33-C3) from January 2015 to March 2020, who were either fixed with lateral locked plating augmented with hybrid locked medial plating (LP-HLMP, n = 32) or lateral locked plating (LLP, n = 30) alone. Specifically, compression screws were applied in the middle of the medial plate and flanked by locking ones at both ends. Baseline characteristics, radiological and clinical outcomes were reviewed and analyzed. Multivariate logistic regression analysis was used to identify predictive factors for early fracture healing, and risk factors for delayed union/nonunion. RESULTS: Demographics including age, gender, smoking, diabetes, and injury mechanism were comparable between the two groups. Reduction quality was better in the LP-HLMP group (p < 0.001). Although the LP-HLMP group experienced longer duration of surgery (125 min vs. 100 min, p < 0.001), sign of healing at 3 months was more obvious in this group (75%, 24/32 vs. 30%, 9/30; p < 0.001). The LP-HLMP group also presented with higher union rate (93.8%, 30/32 vs. 56.7%, 17/30; p = 0.001) and lower reoperation rate (0%, 0/32 vs. 13.3%, 4/30; p = 0.049). Kolment score showed no statistical significance between the two groups. Multivariate analysis revealed that younger age (< 60 years) (OR 5.99, 95%CI 1.16 - 31.03; p = 0.001) and LP-HLMP fixation (OR 45.90, 95% CI 4.78 - 440.56; p = 0.001) predict early healing; while smoking (OR 17.80, 95% CI 2.41 - 131.49; p = 0.01) and fracture translation (OR 3.49, 95% CI 1.46 - 8.32; p = 0.01) were identified as risk factors for delayed union/nonunion. CONCLUSION: Hybrid locked medial plating in this study favors the healing of comminuted DFFs and reduces reoperation. Additionally, smoking and suboptimal reduction (translation) predict delayed union/nonunion.