RESUMEN
High phosphate concentrations in natural waters are associated with eutrophication problems that negatively affect the fauna and flora of ecosystems. As an alternative solution to this problem, we evaluated the adsorptive capacity of the fruit peel ash (PPA) of Caryocar coriaceum Wittm and its efficiency in removing phosphate (PO43-) from aqueous solutions. PPA was produced under an oxidative atmosphere and calcinated at 500 °C. The XRF and EDS analyses of PPA after contact with an aqueous PO43- solution showed an increase in its PO43- content, thus confirming the adsorption of PO43-. The Elovich and Langmuir models are the ones fitting the kinetics and the equilibrium state of the process, respectively. The highest PO43- adsorption capacity was approximately 79.50 mg g-1 at 10 °C. PO43- adsorption by PPA is a spontaneous, favorable, and endothermic process involving structural changes. The highest removal efficiency was 97.08% using a 100 mg.L-1 PO43- solution. In sight of this, PPA has shown potential as an excellent natural bioadsorbent.
RESUMEN
Methylene Blue (MB) is a dye widely used in the industrial sector and in human and veterinary pharmacology. This dye, if improperly disposed of, can cause a significant environmental impact due to its low biodegradability, as it is a stable and complex substance. Additionally, it may affect human health and generate highly toxic byproducts. Hence, the purpose of this work is to assess the removal efficiency of MB from a synthetic effluent using a ionic flocculation process. Such a process consists of the dissolution of a biodegradable anionic surfactant (obtained from soybean oil used for frying food) in the synthetic effluent and the subsequent addition of calcium to the system. The addition of Ca leads to the formation of insoluble surfactant flocs with a high capacity to adsorb organic pollutants. The FTIR testing showed the presence of OH- and C=O groups in the surfactant flocs, which favor the removal of MB by an adsorption process. The maximum adsorption capacity of MB was 101.38 mg g-1. The process is in fact a chemisorption and has an exothermic nature. Desorption studies showed a desorption efficiency of up to 47.81% using an ethanol 1:2 solution. An MB removal efficiency of up to 93.71% was attained in just 0.5 min for an initial MB concentration of 100 mg L-1, showing that ionic flocculation is a very fast and effective process for the treatment of effluents.