RESUMEN
Large-area flexible transparent conductive films (TCFs) are highly desired for future electronic devices. Nanocarbon TCFs are one of the most promising candidates, but some of their properties are mutually restricted. Here, a novel carbon nanotube network reorganization (CNNR) strategy, that is, the facet-driven CNNR (FD-CNNR) technique, is presented to overcome this intractable contradiction. The FD-CNNR technique introduces an interaction between single-walled carbon nanotube (SWNT) and Cuâ-O. Based on the unique FD-CNNR mechanism, large-area flexible reorganized carbon nanofilms (RNC-TCFs) are designed and fabricated with A3-size and even meter-length, including reorganized SWNT (RSWNT) films and graphene and RSWNT (G-RSWNT) hybrid films. Synergistic improvement in strength, transmittance, and conductivity of flexible RNC-TCFs is achieved. The G-RSWNT TCF shows sheet resistance as low as 69 Ω sq-1 at 86% transmittance, FOM value of 35, and Young's modulus of ≈45 MPa. The high strength enables RNC-TCFs to be freestanding on water and easily transferred to any target substrate without contamination. A4-size flexible smart window is fabricated, which manifests controllable dimming and fog removal. The FD-CNNR technique can be extended to large-area or even large-scale fabrication of TCFs and can provide new insights into the design of TCFs and other functional films.
RESUMEN
High-efficiency extraction of long single-wall carbon nanotubes (SWCNTs) with excellent optoelectronic properties from SWCNT solution is critical for enabling their application in high-performance optoelectronic devices. Here, a straightforward and high-efficiency method is reported for length separation of SWCNTs by modulating the concentrations of binary surfactants. The results demonstrate that long SWCNTs can spontaneously precipitate for binary-surfactant but not for single-surfactant systems. This effect is attributed to the formation of compound micelles by binary surfactants that squeeze the free space of long SWCNTs due to their large excluded volumes. With this technique, it can readily separate near-pure long (≥500 nm in length, 99% in content) and short (≤500 nm in length, 98% in content) SWCNTs with separation efficiencies of 26% and 64%, respectively, exhibiting markedly greater length resolution and separation efficiency than those of previously reported methods. Thin-film transistors fabricated from extracted semiconducting SWCNTs with lengths >500 nm exhibit significantly improved electrical properties, including a 10.5-fold on-state current and 14.7-fold mobility, compared with those with lengths <500 nm. The present length separation technique is perfectly compatible with various surfactant-based methods for structure separations of SWCNTs and is significant for fabrication of high-performance electronic and optoelectronic devices.
RESUMEN
Objective: To analyze the application effect of damage control surgery (DCS) combined with seamless integrated rescue mode in emergency treatment of severe thoracic and abdominal trauma. Methods: The clinical data of 90 patients with severe thoracic and abdominal trauma admitted to the emergency room of our hospital from September 2020 to September 2021 were selected for the retrospective analysis. According to the different treatment methods, they were divided into the experimental group (EG) and the control group (CG), with 45 cases in each group. The CG was treated with seamless integrated rescue mode, and the EG received the DCS combined with seamless integrated rescue mode. The mortality, complication rate, mixed venous oxygen saturation (SvO2), cardiac index (CI), central venous pressure (CVP), prothrombin time (PT), active partial thromboplastin time (APTT), the content of arterial blood lactate (ABL), C-reactive protein (CRP), interleukin-6 (IL-6) and interleukin-10 (IL-10) were compared between the two groups. Results: Compared with the CG, after intervention, the levels of SvO2, CI, CVP, APTT and IL-10 in the EG were signally higher (all P < .05), while the levels of PT, ABL, CRP and IL-6 in the EG were memorably lower (all P < .05), and the mortality and complication rate in the EG were notably lower (all P < .05). Conclusion: The application of DCS combined with seamless integrated rescue mode in emergency treatment of patients with severe thoracic and abdominal trauma can effectively reduce the mortality of patients, improve their coagulation dysfunction, decrease the level of inflammatory factors and reduce the occurrence of complications, with a positive significance for improving disease prognosis.
Asunto(s)
Interleucina-10 , Interleucina-6 , Humanos , Estudios Retrospectivos , Pronóstico , Proteína C-Reactiva , Tratamiento de UrgenciaRESUMEN
High-purity enantiomer separation of chiral single-wall carbon nanotubes (SWCNTs) remains a challenge compared with electrical type and chirality separations due to the limited selectivities for both chirality and handedness, which is important for an exploration of their properties and practical applications. Here, we performed length fractionation for enantiomer-purified SWCNTs and found a phenomenon in which the enantioselectivities were higher for longer nanotubes than for shorter nanotubes due to length-dependent interactions with the gel medium, which provided an effective strategy of controlling nanotube length for high-purity enantiomer separation. Furthermore, we employed a gentler pulsed ultrasonication instead of traditional vigorous ultrasonication for preparation of a low-defect long SWCNT dispersion and achieved the enantiomer separation of single-chirality (6,5) SWCNTs with an ultrahigh enantiomeric purity of up to 98%, which was determined by using the linear relationship between the normalized circular dichroism intensity and the enantiomeric purity. Compared with all results reported previously, the present enantiomeric purity was significantly higher and reached the highest level reported to date. Due to the ultrahigh selectivity in both chirality and handedness, the two obtained enantiomers exhibited perfect symmetry in their circular dichroism spectra, which offers standardization for characterizations and evaluations of SWCNT enantiomers.
RESUMEN
Industrial production of single-chirality carbon nanotubes is critical for their applications in high-speed and low-power nanoelectronic devices, but both their growth and separation have been major challenges. Here, we report a method for industrial separation of single-chirality carbon nanotubes from a variety of raw materials with gel chromatography by increasing the concentration of carbon nanotube solution. The high-concentration individualized carbon nanotube solution is prepared by ultrasonic dispersion followed by centrifugation and ultrasonic redispersion. With this technique, the concentration of the as-prepared individualized carbon nanotubes is increased from about 0.19 mg/mL to approximately 1 mg/mL, and the separation yield of multiple single-chirality species is increased by approximately six times to the milligram scale in one separation run with gel chromatography. When the dispersion technique is applied to an inexpensive hybrid of graphene and carbon nanotubes with a wide diameter range of 0.8-2.0 nm, and the separation yield of single-chirality species is increased by more than an order of magnitude to the sub-milligram scale. Moreover, with present separation technique, the environmental impact and cost of producing single-chirality species are greatly reduced. We anticipate that this method promotes industrial production and practical applications of single-chirality carbon nanotubes in carbon-based integration circuits.
RESUMEN
A high-temperature accelerometer plays an important role for ensuring normal operation of equipment in aerospace, such as monitoring and identifying abnormal vibrations of aircraft engines. Phase transitions of piezoelectric crystals, mechanical failure and current leakage of piezoresistive/capacitive materials are the prominent inherent limitations of present high-temperature accelerometers working continuously above 973 K. With the rapid development of aerospace, it is a great challenge to develop a new type of vibration sensor to meet the crucial demands at high temperature. Here we report a high-temperature accelerometer working with a contact resistance mechanism. Based on the improved graphene aerogel (GA) prepared by a modulated treatment process, the accelerometer can operate continuously and stably at 1073 K and intermittently at 1273 K. The developed sensor is lightweight (sensitive element <5 mg) and has high sensitivity (an order of magnitude higher than MEMS accelerometers) and wide frequency response range (up to 5 kHz at 1073 K) with marked stability, repeatability and low nonlinearity error (<1%). These merits are attributed to the excellent and stable mechanical properties of the improved GA in the range of 299-1073 K. The accelerometer could be a promising candidate for high-temperature vibration sensing in space stations, planetary rovers and others.
RESUMEN
Establishing the relationship between the electrical transport properties of single-wall carbon nanotubes (SWCNTs) and their structures is critical for the design of high-performance SWCNT-based electronic and optoelectronic devices. Here, we systematically investigated the effect of the chiral structures of SWCNTs on their electrical transport properties by measuring the performance of thin-film transistors constructed by eleven distinct (n, m) single-chirality SWCNT films. The results show that, even for SWCNTs with the same diameters but different chiral angles, the difference in the on-state current or carrier mobility could reach an order of magnitude. Further analysis indicates that the electrical transport properties of SWCNTs have strong type and family dependence. With increasing chiral angle for the same-family SWCNTs, Type I SWCNTs exhibit increasing on-state current and mobility, while Type II SWCNTs show the reverse trend. The differences in the electrical properties of the same-family SWCNTs with different chiralities can be attributed to their different electronic band structures, which determine the contact barrier between electrodes and SWCNTs, intrinsic resistance and intertube contact resistance. Our present findings provide an important physical basis for performance optimization and application expansion of SWCNT-based devices.
RESUMEN
Although individual carbon nanotubes (CNTs) are superior to polymer chains, the mechanical and thermal properties of CNT fibers (CNTFs) remain inferior to synthetic fibers because of the failure of embedding CNTs effectively in superstructures. Conventional techniques resulted in a mild improvement of target properties while degrading others. Here, a double-drawing technique is developed to rearrange the constituent CNTs. Consequently, the mechanical and thermal properties of the resulting CNTFs can simultaneously reach their highest performances with specific strength ~3.30 N tex-1 (4.60 GPa), work of rupture ~70 J g-1, and thermal conductivity ~354 W m-1 K-1 despite starting from low-crystallinity materials (IG:ID ~ 5). The processed CNTFs are more versatile than comparable carbon fiber, Zylon and Dyneema. On the basis of evidence of load transfer efficiency on individual CNTs measured with in situ stretching Raman, we find that the main contributors to property enhancements are the increasing of the effective tube contribution.
RESUMEN
Structural control of single-wall carbon nanotubes (SWCNTs) with uniform properties is critical not only for their property modulation and functional design but also for applications in electronics, optics, and optoelectronics. To achieve this goal, various separation techniques have been developed in the past 20 years through which separation of high-purity semiconducting/metallic SWCNTs, single-chirality species, and even their enantiomers have been achieved. This progress has promoted the property modulation of SWCNTs and the development of SWCNT-based optoelectronic devices. Here, the recent advances in the structure separation of SWCNTs are reviewed, from metallic/semiconducting SWCNTs, to single-chirality species, and to enantiomers by several typical separation techniques and the application of the corresponding sorted SWCNTs. Based on the separation procedure, efficiency, and scalability, as well as, the separable SWCNT species, purity, and quantity, the advantages and disadvantages of various separation techniques are compared. Combined with the requirements of SWCNT application, the challenges, prospects, and development direction of structure separation are further discussed.
RESUMEN
As possible alternatives to traditional thermoelectric (TE) materials, carbon nanomaterials and their hybrid materials have great potential in the future application of flexible and lightweight temperature detection. In this work, an integrated, highly flexible, and tailorable TE temperature detector with high performance has been fabricated based on a continuous single-walled carbon nanotube (SWCNT) fiber. The detector consists of more than one pairs of thermocouples composed of p-type SWCNT fiber and n-type SWCNT hybrid fiber in situ doped by polyethylenimine. Due to the node contact mechanism of the detection, the sensitivity of the detector can be improved with the increase of the number of p-n thermocouples, independent of the length of the thermocouple. The temperature detection process of the detector has been studied in detail. In particular, the integrated and flexible detector can be divided into several sub-detectors easily by cutting, illustrating the prospect of large-scale preparation of this kind of novel temperature detectors. Its high flexibility ensures the detector to maintain excellent detection performance after 15 000 bending circles. Furthermore, the as-designed TE type temperature detector demonstrates a great application promise for real-time temperature detection and temperature change sensing even in complex surface and harsh environment.
RESUMEN
Mass production of zigzag and near-zigzag single-wall carbon nanotubes (SWCNTs), whether by growth or separation, remains a challenge, which hinders the disclosure of their previously unknown property and practical applications. Here, we report a method to separate SWCNTs by chiral angle through temperature control of a binary surfactant system of sodium cholate (SC) and SDS in gel chromatography. Eleven types of single-chirality SWCNT species with chiral angle less than 20° were efficiently separated including multiple zigzag and near-zigzag species. Among them, (7, 3), (8, 3), (8, 4), (9, 1), (9, 2), (10, 2), and (11, 1), were produced on the submilligram scale. The spectral detection results indicate that lowering the temperature induced selective adsorption and reorganization of the SC/SDS cosurfactants on SWCNTs with different chiral angles, amplifying their interaction difference with gel. We believe that this work is an important step toward industrial separation of single-chirality zigzag and near-zigzag SWCNTs.
RESUMEN
The inorganic CsPbI2Br perovskite faces serious challenges of low phase stability and high moisture sensitivity. The moisture controllable process of a hole-transporting layer (HTL) is crucial for the development of stable and efficient inorganic perovskite solar cells (IPSCs). In this work, we proposed an oxidization-free spiro-OMeTAD hole-transport layer (HTL) with a preoxidized spiro-OMeTAD solution to prevent moisture and completely avoid the phase transition of CsPbI2Br from the α-phase to ß-phase. The oxidization-free HTL exhibited improved surface hydrophobic properties, smoother morphology, and optimized energy-level alignment compared with a traditional HTL. As a result, the CsPbI2Br-based IPSCs achieved an efficiency of up to 14.2 and 86.6% of the initial power conversion efficiency (PCE) with 2000 h storage. Meanwhile, this oxidization-free HTL was applied in CH3NH3PbI3-based PSCs and obtained 13.8% PCE enhancement, which proved the universality of the solution preoxidization tactic. We believe that the oxidization-free HTL could be an efficient strategy to replace traditional HTLs and can be widely used in perovskite solar cells, especially in moisture-sensitive PSCs.
RESUMEN
Passivation of electronic defects on the surface and at grain boundaries (GBs) of perovskite films has become one of the most effective tactics to suppress charge recombination in perovskite solar cells. It is demonstrated that trap states can be effectively passivated by Lewis acid or base functional groups. In this work, nicotinamide (NTM, commonly known as vitamin B3 or vitamin PP) serving as a Lewis base additive is introduced into the PbI2 and/or FAI: MABr: MACl precursor solution to obtain NTM modified perovskite films. It has been found that the NTM in the perovskite film can well passivate surface and GBs defects, control the film morphology and enhance the crystallinity via its interaction with a lone pair of electrons in nitrogen. In the presence of the NTM additive, we obtained enlarged perovskite crystal grain about 3.6 µm and a champion planar perovskite solar cell with efficiency of 21.72% and negligible hysteresis. Our findings provide an effective route for crystal growth and defect passivation to bring further increases on both efficiency and stability of perovskite solar cells.
RESUMEN
We quantitatively analyze the effect of reabsorption on the Raman spectroscopy of (10, 3) and (8, 3) single-chirality single-wall carbon nanotube (SWCNT) solutions by varying the detection depth in confocal micro-Raman measurements and SWCNT concentration the in sample solution. The increase of the detection depth and concentration of SWCNTs enhances the reabsorption effect and decreases the intensities of the Raman features. More importantly, reabsorption exhibits different effects on different Raman features such as the radial breathing mode (RBM) and G+ band, strongly depending on the resonance degree of the scattered light energy and the interband transition of SWCNTs. When (10, 3) SWCNTs are excited with a 633 nm laser, the scattered light from RBM has stronger resonance with the interband transition of the SWCNTs than that from the G+ band, leading to a faster reduction in the RBM intensity and a lower intensity ratio of RBM to the G+ band. In contrast, when (8, 3) SWCNTs are excited with a 633 nm laser, reabsorption has the same effect on the RBM and G+ band intensities and thus maintains a constant intensity ratio of RBM to the G+ band. Furthermore, we precisely establish a quantitative relationship of the intensities of the Raman features such as RBM, the G+ band and their intensity ratio as a function of the focal depth and SWCNT concentration by theoretical calculations and numerical simulation, which reproduces the experimental results well. These results are very useful in the precise analysis of the Raman spectroscopy of SWCNTs and thus their applications in molecular detection and imaging.
RESUMEN
Single-walled carbon nanotube (SWCNT) films are promising materials as flexible transparent conductive films (TCFs). Here, inspired by the extrusion blown plastic film technique and the SWCNT synthesis approach by floating catalyst chemical vapor deposition (FCCVD), a novel blown aerosol chemical vapor deposition (BACVD) method is reported to directly and continuously produce freestanding SWCNT TCFs at several hundred meters per hour. The synthesis mechanism, involving blowing a stable aerosol bubble and transforming the bubble into an aerogel, is investigated, and a general phase diagram is established for this method. For the SWCNT TCFs via BACVD, both carbon conversion efficiency and SWCNT TCF yield can reach three orders of magnitude higher than those with the conventional FCCVD. The film displays a sheet resistance of 40 ohm sq-1 at 90% transmittance after being doped, representing the record performance based on large-scale SWCNT films. Transparent, flexible, and stretchable electrodes based on BACVD films are demonstrated. Moreover, this high-throughput method of producing SWCNT TCFs can be compatible with the roll-to-roll process for mass production of flexible displays, touch screens, solar cells, and solid-state lighting, and is expected to have a broad and long-term impact on many fields from consumer electronics to energy conversion and generation.
RESUMEN
One of the critical challenges for semiconductor photocatalysis is the high efficiency utilization of solar energy. For plasmonic metal-semiconductor photocatalysts, the photocatalytic activity over an extended wavelength range for a photoresponsive semiconductor could be significantly improved either via the direct electron transfer (DET) or via the plasmon-induced resonant energy transfer (PIRET). Still, the narrow spectral overlap of plasmon and the semiconductor band edge is a key factor in restricting the development of PIRET. Herein, we have introduced a simple and versatile strategy to realize a broad spectral overlap by creating multipolar plasmon resonances near the semiconductor band edge. Cu2O coated Au/Ag nanorods (NRs) were prepared using a facile wet chemistry method. Transverse plasmon modes of Au/Ag/Cu2O NRs can split into dipole and octupole plasmon modes. The core aspect ratio and shell thickness could be used to regulate these two modes for extending the spectral overlap of plasmon resonance and the Cu2O band edge. Au/Ag/Cu2O NRs were found to display enhanced visible light photocatalytic activity compared to spherical Au/Ag/Cu2O nanoparticles. The enhancement mechanism was ascribed to both dipole and octupole plasmon modes boosting electron-hole separation in Cu2O via PIRET as confirmed by transient absorption measurements.
RESUMEN
An all-carbon pressure sensor is designed and fabricated based on reduced graphene oxide (rGO) nanomaterials. By sandwiching one layer of superelastic rGO aerogel between two freestanding high-conductive rGO thin papers, the sensor works based on the contact resistance at the aerogel-paper interfaces, getting rid of the alien materials such as polymers and metals adopted in traditional sensors. Without the limitation of alien materials, the all-carbon sensors demonstrate an ultrawide detecting range (0.72 Pa-130 kPa), low energy consumption (≈0.58 µW), ultrahigh sensitivity (349-253 kPa-1 ) at low-pressure regime (<1.4 Pa), fast response time (8 ms at 1 kPa), high stability (10 000 unloading-loading cycles between 0 and 1 kPa), light weight (<10 mg), easily scalable fabrication process, and excellent chemical stability. These merits enable them to detect real-time human physiological signals and monitor the weights of various droplets of not only water but also hazardous chemical reagents including strong acid, strong alkali, and organic solvents. This shows their great potential applications in real-time health monitoring, sport performance detecting, harsh environment-related robotics and industry, and so forth.
RESUMEN
Efficient electron transport layers (ETLs) are the crucial issue for electron transport and hole blocking in organic-inorganic hybrid perovskite solar cells (PSCs). To date, most of the reported effective ETLs have comprised TiO2, which exhibits limited electron mobility and numerous defect states and restricts the enhancement of the performance of PSCs. Hence, the investigation of effective tactics for improving the electronic properties of TiO2 is critical for the fabrication of high-efficiency devices. In this study, a cerium doping method was adopted in mesoporous TiO2, which was prepared via a traditional one-step hydrothermal process, to improve its electron transport properties by recombining nanocrystals and optimizing the negative flat band potential of TiO2. Continuous, aligned and regulated recombined crystals of mesoporous TiO2 were obtained with optimized pathways of electron transport from the ETL to the FTO layer. Moreover, a small amount of Ti4+ ions was replaced by Ce4+ ions in the TiO2 lattice, which led to deformation of the TiO2 lattice and influenced the growth process of TiO2 grains. With an optimized mole proportion of Ce element in the TiO2 precursor, the power conversion efficiency (PCE) of perovskite solar cells was typically boosted to 17.75% in comparison with 15.92% in the case of undoped TiO2.
RESUMEN
The aim of this study is to improve the quality of testing for glucose-6-phosphate dehydrogenase (G6PD) deficiency through evaluation and analysis of the laboratory tests for G6PD activity. External quality assessment (EQA) was carried out twice per year with five samples each from 2014 to 2016. Samples were used for quantitative and qualitative assays. Quantitative results were collected, qualitative results were determined with reference values, and information about methods, reagents and instruments from participating laboratories within the required time. Laboratory performance scores, coefficient of variation (CV), and the rates of false negative and positive results were calculated. As a result, a total of 2,834 cases of negative quality control (QC) samples and 2,451 cases of positive QC samples were assessed, where the rates of false negative and false positive results were 1.31% (37/2,834) and 1.34% (33/2,451), respectively. Quantitative results indicated an increasing trend in testing quality, which were consistent with conclusions based on the comparison of EQA full-score and acceptable ratio in six assessments. The 2nd assay in 2016 had the best full-score ratio of 68.9% (135/196) and best acceptable ratio of 84.2% (165/196). There was a decreasing trend in the average CV of six reagents produced in China, and the range of average CV increased to 14.6-23.6% in 2016. The average CV of low level and high level samples was 22.5% and 15.3%, respectively, demonstrating that samples with low G6PD activity have greater interlaboratory CV values. In conclusion, laboratories improved their testing quality and provided better diagnostic service for G6PD deficiency in areas with high incidence after participation in the EQA program in the Guangxi region.
RESUMEN
The electrical characteristics of carbon nanotube (CNT) thin-film transistors (TFTs) strongly depend on the properties of the gate dielectric that is in direct contact with the semiconducting CNT channel materials. Here, we systematically investigated the dielectric effects on the electrical characteristics of fully printed semiconducting CNT-TFTs by introducing the organic dielectrics of poly(methyl methacrylate) (PMMA) and octadecyltrichlorosilane (OTS) to modify SiO2 dielectric. The results showed that the organic-modified SiO2 dielectric formed a favorable interface for the efficient charge transport in s-SWCNT-TFTs. Compared to single-layer SiO2 dielectric, the use of organic-inorganic hybrid bilayer dielectrics dramatically improved the performances of SWCNT-TFTs such as mobility, threshold voltage, hysteresis and on/off ratio due to the suppress of charge scattering, gate leakage current and charge trapping. The transport mechanism is related that the dielectric with few charge trapping provided efficient percolation pathways for charge carriers, while reduced the charge scattering. High density of charge traps which could directly act as physical transport barriers and significantly restrict the charge carrier transport and, thus, result in decreased mobile carriers and low device performance. Moreover, the gate leakage phenomenon is caused by conduction through charge traps. So, as a component of TFTs, the gate dielectric is of crucial importance to the manufacture of high quality TFTs from the aspects of affecting the gate leakage current and device operation voltage, as well as the charge carrier transport. Interestingly, the OTS-modified SiO2 allows to directly print horizontally aligned CNT film, and the corresponding devices exhibited a higher mobility than that of the devices with the hybrid PMMA/SiO2 dielectric although the thickness of OTS layer is only â¼2.5 nm. Our present result may provide key guidance for the further development of printed nanomaterial electronics.