RESUMEN
Producing valuable chemicals like ethylene via catalytic carbon monoxide conversion is an important nonpetroleum route. Here we demonstrate an electrochemical route for highly efficient synthesis of multicarbon (C2+) chemicals from CO. We achieve a C2+ partial current density as high as 4.35 ± 0.07 A cm-2 at a low cell voltage of 2.78 ± 0.01 V over a grain boundary-rich Cu nanoparticle catalyst in an alkaline membrane electrode assembly (MEA) electrolyzer, with a C2+ Faradaic efficiency of 87 ± 1% and a CO conversion of 85 ± 3%. Operando Raman spectroscopy and density functional theory calculations reveal that the grain boundaries of Cu nanoparticles facilitate CO adsorption and C - C coupling, thus rationalizing a qualitative trend between C2+ production and grain boundary density. A scale-up demonstration using an electrolyzer stack with five 100 cm2 MEAs achieves high C2+ and ethylene formation rates of 118.9 mmol min-1 and 1.2 L min-1, respectively, at a total current of 400 A (4 A cm-2) with a C2+ Faradaic efficiency of 64%.
RESUMEN
The lifetime of hydroxyl radicals (â OH) in the fuel cell catalyst layer remains uncertain, which hampers the comprehension of radical-induced degradation mechanisms and the development of longevity strategies for proton-exchange membrane fuel cells (PEMFCs). In this study, we have precisely determined that the lifetime of â OH radicals can extend up to several seconds in realistic fuel cell catalyst layers. This finding reveals that â OH radicals are capable of carrying out long-range attacks spanning at least a few centimeters during PEMFCs operation. Such insights hold great potential for enhancing our understanding of radical-mediated fuel cell degradation processes and promoting the development of durable fuel cell devices.
RESUMEN
Electrocatalytic acetylene semi-hydrogenation (EASH) offers a promising and environmentally friendly pathway for the production of C2H4, a widely used petrochemical feedstock. While the economic feasibility of this route has been demonstrated in three-electrode systems, its viability in practical device remains unverified. In this study, we designed a highly efficient electrocatalyst based on a PdCu alloy system utilizing the hydrogen spillover mechanism. The catalyst achieved an operational current density of 600 mA cm-2 in a zero-gap membrane electrode assembly (MEA) reactor, with the C2H4 selectivity exceeding 85%. This data confirms the economic feasibility of EASH in real-world applications. Furthermore, through in situ Raman spectroscopy and theoretical calculations, we elucidated the catalytic mechanism involving interfacial hydrogen spillover. Our findings underscore the economic viability and potential of EASH as a greener and scalable approach for C2H4 production, thus advancing the field of electrocatalysis in sustainable chemical synthesis.
RESUMEN
Electrochemical conversion of alkanes to high value-added oxygenated products under a mild condition is of significance. Herein, we effectively couple the electrocatalysis of H2 O2 with the thermo-catalysis of propane oxidation in the cathode of proton exchange membrane fuel cell. Specifically, H2 O2 is in-situ generated on the nitric acid-treated carbon black (C-acid) via 2e- process of oxygen reduction reaction, and then transports to the Fe active sites of MIL-53 (Al, Fe) metal-organic frameworks for propane oxidation. Based on this strategy, the space-time yield of C3 oxygenated products of propane oxidation reaches 2.65â µmol h-1 cm-2 , which represents a new benchmark for electrochemical alkane oxidation in the fuel-cell-type electrolyzer. This study highlights the importance of multifunctional composite catalysts in the field of electrosynthesis.
RESUMEN
Demetalation, caused by the electrochemical dissolution of metal atoms, poses a significant challenge to the practical application of single-atom catalytic sites (SACSs) in proton exchange membrane-based energy technologies. One promising approach to inhibit SACS demetalation is the use of metallic particles to interact with SACSs. However, the mechanism underlying this stabilization remains unclear. In this study, we propose and validate a unified mechanism by which metal particles can inhibit the demetalation of Fe SACSs. Metal particles act as electron donors, decreasing the Fe oxidation state by increasing the electron density at the FeN4 position, thereby strengthening the Fe-N bond, and inhibiting electrochemical Fe dissolution. Different types, forms, and contents of metal particles increase the Fe-N bond strength to varying extents. A linear correlation between the Fe oxidation state, Fe-N bond strength, and electrochemical Fe dissolution amount supports this mechanism. Our screening of a particle-assisted Fe SACS led to a 78% reduction in Fe dissolution, enabling continuous operation for up to 430 h in a fuel cell. These findings contribute to the development of stable SACSs for energy applications.
RESUMEN
The detailed structure of the water layer in the inner Helmholtz plane of a solid/aqueous solution interface is closely related to the electrochemical and catalytic performances of electrode materials. While the applied potential can have a great impact, specifically adsorbed species can also influence the interfacial water structure. With the specific adsorption of p-nitrobenzoic acid on the Au(111) surface, a protruding band above 3600 cm-1 appears in the electrochemical infrared spectra, indicating a distinct interfacial water structure as compared to that on bare metal surfaces, which displays a potential-dependent broad band in the range of 3400-3500 cm-1. Although three possible structures have been guessed for this protruding infrared band, the band assignment and interfacial water structure remain ambiguous in the past two decades. Herein, by combining surface-enhanced infrared absorption spectroscopy and our newly developed quantitative computational method for electrochemical infrared spectra, the protruding infrared band is clearly assigned to the surface-enhanced stretching mode of water molecules hydrogen-bonded to the adsorbed p-nitrobenzoate ions. Water molecules, meanwhile, are hydrogen-bonded with themselves to form chains of five-membered rings. Based on the reaction free energy diagram, we further demonstrate that both hydrogen-bonding interactions and coverages of specifically adsorbed p-nitrobenzoate play an important role in determining the structure of the water layer in the Au(111)/p-nitrobenzoic acid solution interface. Our work sheds light on structural studies of the inner Helmholtz plane under specific adsorptions, which advances the understanding of structure-property relationships in electrochemical and heterogeneous catalytic systems.
RESUMEN
Proton transfer is crucial for electrocatalysis. Accumulating cations at electrochemical interfaces can alter the proton transfer rate and then tune electrocatalytic performance. However, the mechanism for regulating proton transfer remains ambiguous. Here, we quantify the cation effect on proton diffusion in solution by hydrogen evolution on microelectrodes, revealing the rate can be suppressed by more than 10 times. Different from the prevalent opinions that proton transport is slowed down by modified electric field, we found water structure imposes a more evident effect on kinetics. FTIR test and path integral molecular dynamics simulation indicate that proton prefers to wander within the hydration shell of cations rather than to hop rapidly along water wires. Low connectivity of water networks disrupted by cations corrupts the fast-moving path in bulk water. This study highlights the promising way for regulating proton kinetics via a modified water structure.
RESUMEN
OBJECTIVE: Arthroscopic release is effective for patients with shoulder stiffness, but the traditional inside-out procedure cannot effectively alleviate the mobility of some severe stiff shoulder and even cause itrogenic injuries sometimes. The aim of this study is to evaluate the clinical efficacy and advantages of a modified outside-in shoulder release approach for severe shoulder stiffness. METHODS: Included in this retrospective study were 15 patients (five male and 10 female) with severe shoulder stiffness who underwent modified outside-in shoulder release surgery at our hospital between June 2019 and March 2021. Of them, 10 patients had a primary frozen shoulder and five had secondary shoulder stiffness, involving the right shoulder in six cases and the left shoulder in nine cases. The mean age of the 15 patients was 56.7 (34-69) years. The patients were instructed to exercise passively from second-day post-operation and enhance the rehabilitation exercise gradually. All patients received a range of motion (ROM) examination before and after surgery. The American Shoulder and Elbow Surgeon's Score (ASES), Constant Score (CS), and Visual Analog Scale (VAS) score for pain were recorded. All data were tested by normal distribution first and then by paired T test, otherwise by Wilcoxon rank sum test. RESULTS: The mean follow-up period was 18.2 (12-33) months. Compared with the preoperative value, the mean ASES score at the final follow-up improved from 38.4 ± 7.37 to 88.13 ± 6.33 points; the mean CS score from 43.27 ± 6.71 to 78.74 ± 6.93 points; the mean VAS score from 5.07 ± 1.03 to 0.81 ± 0.83 points; forward flexion from 81.93° ± 11.45° to 156.73° ± 9.12°; abduction from 65.93° ± 16.82° to 144.80° ± 8.83°; neutral external rotation from 13.53° ± 10.38° to 51.20° ± 4.77°; internal rotation from the buttock to waist (L3), all showing a significant difference (P < 0.0001). No serious complication was observed in any patient during the postoperative follow-up periods. CONCLUSION: The present study has demonstrated that the modified arthroscopic outside-in shoulder release approach can improve ROM of patients and alleviate pain effectively, proving it to be an appropriate surgical option for the treatment of severe shoulder stiffness.
Asunto(s)
Artropatías , Articulación del Hombro , Humanos , Masculino , Femenino , Persona de Mediana Edad , Anciano , Hombro , Estudios Retrospectivos , Articulación del Hombro/cirugía , Artroscopía/métodos , Liberación de la Cápsula Articular/métodos , Resultado del Tratamiento , Rango del Movimiento ArticularRESUMEN
Partial-thickness rotator cuff tears are common diseases causing pain and disability. Among the different surgical methods, the transtendon repair technique is recommended due to its biomechanically superiority. However, this technique has a high learning curve and is time-consuming. In this Technical Note, we introduce a safer and more effective modified transtendon repair technique. Our switching-scope technique sets a switching stick into the glenohumeral joint through the posterior portal and is used as a guide for switching the arthroscope between the subacromial and articular spaces. This technique can reduce surgical time and overcome the disadvantage of vision limitation in articular-sided transtendon repair.
RESUMEN
Interfacial pH is critical to electrocatalytic reactions involving proton-coupled electron transfer (PCET) processes, and maintaining an optimal interfacial pH at the electrochemical interface is required to achieve high activity. However, the interfacial pH varies inevitably during the electrochemical reaction owing to slow proton transfer at the interfacial layer, even in buffer solutions. It is therefore necessary to find an effective and general way to promote proton transfer for regulating the interfacial pH. In this study, we propose that promoting proton transfer at the interfacial layer can be used to regulate the interfacial pH in order to enhance electrocatalytic activity. By adsorbing a bifunctional 4-mercaptopyridine (4MPy) molecule onto the catalyst surface via its thiol group, the pyridyl group can be tethered on the electrochemical interface. The pyridyl group acts as both a good proton acceptor and donor for promoting proton transfer at the interfacial layer. Furthermore, the pK a of 4MPy can be modulated with the applied potentials to accommodate the large variation of interfacial pH under different current densities. By in situ electrochemical surface-enhanced Raman spectroscopy (in situ EC-SERS), we quantitatively demonstrate that proton transfer at the interfacial layer of the Pt catalyst coated with 4MPy (Pt@4MPy) remains ideally thermoneutral during the H+ releasing electrocatalytic oxidation reaction of formic acid (FAOR) at high current densities. Thus, the interfacial pH is controlled effectively. In this way, the FAOR apparent current measured from Pt@4MPy is twice that measured from a pristine Pt catalyst. This work establishes a general strategy for regulating interfacial pH to enhance the electrocatalytic activities.
RESUMEN
The rational design of non-Pt oxygen reduction reaction (ORR) catalysts and catalyst layers in fuel cells is largely impeded by insufficient knowledge of triple-phase boundaries (TPBs) in the micropore and mesopore ranges. Here, we developed a size-sensitive molecular probe method to resolve the TPB of Fe/N/C catalyst layers in these size ranges. More than 70% of the ORR activity was found to be contributed by the 0.8- to 2.0-nanometer micropores of Fe/N/C catalysts, even at a low micropore area fraction of 29%. Acid-alkaline interactions at the catalyst-polyelectrolyte interface deactivate the active sites in mesopores and macropores, resulting in inactive TPBs, leaving micropores without the interaction as the active TPBs. The concept of active and inactive TPBs provides a previously unidentified design principle for non-Pt catalyst and catalyst layers in fuel cells.
RESUMEN
Electrochemical conversion of propene is a promising technique for manufacturing commodity chemicals by using renewable electricity. To achieve this goal, we still need to develop high-performance electrocatalysts for propene electrooxidation, which highly relies on understanding the reaction mechanism at the molecular level. Although the propene oxidation mechanism has been well investigated at the solid/gas interface under thermocatalytic conditions, it still remains elusive at the solid/liquid interface under an electrochemical environment. Here, we report the mechanistic studies of propene electrooxidation on PdO/C and Pd/C catalysts, considering that the Pd-based catalyst is one of the most promising electrocatalytic systems. By electrochemical in situ attenuated total reflection Fourier transform infrared spectroscopy, a distinct reaction pathway was observed compared with conventional thermocatalysis, emphasizing that propene can be dehydrogenated at a potential higher than 0.80 V, and strongly adsorb via µ-CâCHCH3 and µ3-η2-CâCHCH3 configuration on PdO and Pd, respectively. The µ-CâCHCH3 is via bridge bonds on adjacent Pd and O atoms on PdO, and it can be further oxidized by directly taking surface oxygen from PdO, verified by the H218O isotope-edited experiment. A high surface oxygen content on PdO/C results in a 3 times higher turnover frequency than that on Pd/C for converting propene into propene glycol. This finding highlights the different reaction pathways under an electrochemical environment, which sheds light on designing next-generation electrocatalysts for propene electrooxidation.
RESUMEN
A bicyclic pyrone-type species on oxygen-doped carbon catalysts was identified as the active site for the oxygen reduction reaction in acidic solution. It has much higher activity than that of typical nitrogen-doped carbon catalysts (0.219 e s-1 site-1vs. 0.021-0.088 e s-1 site-1 at 0.6 VRHE). The ortho-carbon atom in the carbonyl ring of the pyrone-type species was revealed as the reactive site by theoretical calculations.
Asunto(s)
Carbono , Pironas , Carbono/química , Dominio Catalítico , Oxidación-Reducción , Oxígeno/químicaRESUMEN
The oxygen reduction reaction (ORR) activity of the Fe/N/Carbon catalysts derived from the pyrolysis of zeolitic-imidazolate-framework-8 (ZIF-8) has been still lower than that of commercial Pt-based catalysts utilized in the proton exchange membrane fuel cells (PEMFCs) due to low density of accessible active sites. In this study, an efficient carbon-supporting strategy is developed to enhance the ORR efficiency of the ZIF-derived Fe/N/Carbon catalysts by increasing the accessible active site density. The enhancement lies in (i) improving the accessibility of active sites via converting dodecahedral particles to graphene-like layered materials and (ii) enhancing the density of FeNx active sites via suppressing the formation of nanoparticles as well as providing extra spaces to host active sites. The optimized and efficient Fe/N/Carbon catalyst shows a half-wave potential (E1/2) of 0.834 V versus reversible hydrogen electrode in acidic media and produces a peak power density of 0.66 W cm-2 in an air-fed PEMFC at 2 bar backpressure, outperforming most previously reported Pt-free ORR catalysts. Finally, the general applicability of the carbon-supporting strategy is confirmed using five different commercial carbon blacks. This work provides an effective route to derive Fe/N/Carbon catalysts exhibiting a higher power density in PEMFCs.
RESUMEN
CO poisoning of Pt-group metal catalysts is a long-standing problem, particularly for hydrogen oxidation reaction in proton exchange membrane fuel cells. Here, we report a catalyst of Ru oxide-coated Ru supported on TiO2 (Ru@RuO2/TiO2), which can tolerate 1-3% CO, enhanced by about 2 orders of magnitude over the classic PtRu/C catalyst, for hydrogen electrooxidation in a rotating disk electrode test. This catalyst can work stably in 1% CO/H2 for 50 h. About 20% of active sites can survive even in a pure CO environment. The high CO tolerance is not via a traditional bifunctional mechanism, i.e., oxide promoting CO oxidation, but rather via hydrous metal oxide shell blocking CO adsorption. An ab initio molecular dynamics (AIMD) simulation indicates that water confined in grain boundaries of the Ru oxide layer and Ru surface can suppress the diffusion and adsorption of CO. This oxide blocking layer approach opens a promising avenue for the design of high CO-tolerant electrocatalysts for fuel cells.
RESUMEN
The impact of pore structure on the two-electron oxygen reduction reaction (ORR) in nitrogen-doped carbon materials is currently under debate, and previous studies are mainly limited to the rotating ring-disk electrode (RRDE) rather than the practical flow cell (FC) system. In this study, assisted by a group of reliable pore models, the impact of two pore structure parameters, that is, Brunauer-Emmett-Teller surface area (SBET ) and micropore surface fraction (fmicro ), on ORR activity and selectivity are investigated in both RRDE and FC. The ORR mass activity correlates positively to the SBET in the RRDE and FC because a higher SBET can host more active sites. The H2 O2 selectivity is independent of fmicro in the RRDE but correlates negatively to fmicro in the FC. The inconsistency results from different states of the electrode in the RRDE and the FC. These insights will guide the design of carbon materials for H2 O2 synthesis.
Asunto(s)
Carbono , Nitrógeno , Carbono/química , Electrodos , Electrones , Nitrógeno/química , Oxidación-Reducción , Oxígeno/químicaRESUMEN
We synthesized Cu single atoms embedded in a N-doped porous carbon catalyst with a high Faradaic efficiency of 93.5% at -0.50 V (vs. RHE) for CO2 reduction to CO. The evolution of Cu single-atom sites to nanoclusters of about 1 nm was observed after CO2 reduction at a potential lower than -0.30 V (vs. RHE). The DFT calculation indicates that Cu nanoclusters improve the CO2 activation and the adsorption of intermediate *COOH, thus exhibiting higher catalytic activity than CuNx sites. The structural instability observed in this study helps in understanding the actual active sites of Cu single atom catalysts for CO2 reduction.
RESUMEN
The rapid progress of proton exchange membrane fuel cells (PEMFCs) and alkaline exchange membrane fuel cells (AMFCs) has boosted the hydrogen economy concept via diverse energy applications in the past decades. For a holistic understanding of the development status of PEMFCs and AMFCs, recent advancements in electrocatalyst design and catalyst layer optimization, along with cell performance in terms of activity and durability in PEMFCs and AMFCs, are summarized here. The activity, stability, and fuel cell performance of different types of electrocatalysts for both oxygen reduction reaction and hydrogen oxidation reaction are discussed and compared. Research directions on the further development of active, stable, and low-cost electrocatalysts to meet the ultimate commercialization of PEMFCs and AMFCs are also discussed.
RESUMEN
OBJECTIVE: To evaluate the early clinical and radiographic results of arthroscopic Latarjet procedure using screw or suture-button fixation in patients with recurrent anterior shoulder dislocation. METHODS: Twelve patients who underwent arthroscopic Latarjet procedure between January 2015 and December 2018 at our institution were retrospectively studied. Data of the patients' history, including age, gender, side of affected arm, body mass index (BMI), and the number of dislocations since fist dislocation were collected. Preoperative and postoperative clinical follow-up data were evaluated using Walch-Duplay score, American Shoulder and Elbow Society (ASES) score, and modified Rowe score. Active external rotation and active internal rotation at 90° of abduction as well as active elevation were evaluated preoperatively and postoperatively. The position and healing condition of the transferred coracoid bony graft were also assessed using computed tomography (CT) and Mimics 19.0 software. RESULTS: Mean follow-up was 24.9 months (range, 13 to 53 months) of all patients. At final follow-up, the average ASES score (preoperative vs postoperative values) had improved from 68.9 ± 7.9 to 91.1 ± 6.1 in screw fixation group and 68.9 ± 8.9 to 87.5 ± 6.7 in suture-button fixation group; the average Rowe score (preoperative vs postoperative values) had improved from 25.0 ± 8.4 to 92.5 ± 4.2 in screw fixation group and 21.7 ± 13.7 to 93.3 ± 4.1 in suture-button fixation group; the average of Walch-Duplay score (preoperative vs postoperative values) had improved from 12.5 ± 15.1 to 91.7 ± 4.1 in screw fixation group and 18.3 ± 20.7 to 88.3 ± 7.5 in button fixation group. The forward flexion was 175.0° ± 8.4° preoperatively and 178.3° ± 4.1° postoperatively in screw fixation group while 174.8° ± 10.2° preoperatively and 175.0° ± 5.5° postoperatively in suture-button fixation group. The active external rotation was 77.5° ± 5.2° preoperatively and 71.7° ± 4.1° postoperatively in screw fixation group while 72.5° ± 6.9° preoperatively and 68.3° ± 7.5° postoperatively in suture-button fixation group. The average of active internal rotation was 66.7° ± 6.1° preoperatively and 67.5° ± 6.1° postoperatively in screw fixation group while 68.3° ± 11.3° preoperatively and 66.7° ± 7.5° postoperatively in suture-button fixation group. In postoperative CT scan, 91.7% grafts midline center were located at or under the equator in the en face view; 75% of the bone blocks were flush to the glenoid face in the axial view, with only two grafts exhibiting slight medial placement in screw fixation group (33.3%) and one graft exhibiting slight lateral placement in suture-button fixation group (16.7%). All grafts achieved bone union. Graft absorption mostly occurred outside of the "best-fit" circle. The average bony absorption rates of the coracoid grafts were 25.2% and 10.18% in screw fixation group and suture-button fixation group, respectively, at 6 months postoperative follow-up. CONCLUSION: Both suture-button fixation and screw fixation techniques in arthroscopic Latarjet procedure revealed excellent clinical outcomes with low complication rates in the early follow-up. The suture-button fixation exhibited a flexible fixation pattern that allowed for self-correction to some extent, even slight lateralization could finally remodel over time.
Asunto(s)
Artroscopía/métodos , Tornillos Óseos , Inestabilidad de la Articulación/cirugía , Procedimientos Ortopédicos/métodos , Luxación del Hombro/cirugía , Técnicas de Sutura , Adolescente , Adulto , Humanos , Masculino , Dimensión del Dolor , Rango del Movimiento Articular , Estudios Retrospectivos , Encuestas y Cuestionarios , Adulto JovenRESUMEN
In this study, puerariae slag (PS) was evaluated as a renewable raw material for acetone-butanol-ethanol (ABE) fermentation. To accelerate the hydrolysis of PS, the method of ultrasound-assisted dilute acid hydrolysis (UAAH) was used. With this effort, 0.69 g reducing sugar was obtained from 1 g raw material under the optimal pretreatment condition. Subsequently, the butanol and total solvent production of 8.79 ± 0.16 g/L and 12.32 ± 0.26 g/L were obtained from the non-detoxified diluted hydrolysate, and the yield and productivity of butanol were 0.19 g/g and 0.12 g/L/h, respectively. Additionally, the changes in the structure of PS after different pretreatment methods were observed using SEM and FT-IR. UAAH resulted in more severe and distinct damage to the dense structure of PS. This study suggests that the UAAH is an attainable but effective pretreatment method, thereby is a promising technique for lignocellulose hydrolysis and improve butanol production.