Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices.

Microfluidics, as an emerging technology, is highly dependent on the evolution of device materials and fabrication techniques. While replica molding of polydimethylsiloxane and hot embossing/injection molding of thermoplastics are most popular, they are either hard to scale up or inappropriate for laboratory-scale prototyping. Recently, photocurable resins, as a huge class of materials, have attracted extensive interest. However, very few of them can now be used in device fabrication due to the challenge in machining these materials. In response, we herein propose a novel concept of composite elastomers, which can covalently link with and consequently offer a flexible support to photocured thin films. This effect would allow most photocurable resins to be used in microfluidic device fabrication, greatly enriching the material choices for diverse applications. Moreover, the whole fabrication process becomes very simple and rapid, with an impressive throughput of at least hundreds of replicas per day. With these features, it is reasonably expected that the composite elastomer-enabled rapid photofabrication method will be very competent for laboratory prototyping, providing not only the ease of fabrication but also a possibility to select the materials specifically for ultimate applications and promising potential for volume production without the redevelopment process. These may offer a good opportunity to narrow the current gap between academic research and industrial practice.

Rapid In Situ Photoimmobilization of a Planar Droplet Array for Digital PCR.

Digital PCR (dPCR) is a powerful technique capable of absolute quantification of nucleic acids with good accuracy. Droplet-based dPCR (ddPCR), among others, is one of the most important dPCR techniques. However, the surface tension-controlled droplets may suffer from fusion/fission due to the vigorous temperature change in PCR thermal cycling. Besides, the free movement of droplets makes them unsuitable for real-time fluorescence monitoring. In this paper, we first developed a photoimmobilized planar droplet array (PIPDA) by using a photocurable polyurethane as the continuous oil phase. It is found that uniform water-in-oil droplets of various sizes can be readily generated, and more importantly, the oil phase can be rapidly solidified in just a few seconds upon exposure to UV irradiation. This process will leave the droplets immobilized in the accommodation chamber as a stable planar array and, thus, effectively prevent the movement, coalescence, and breakup of droplets. In addition, a novel multilayered chip design has been proposed, which can thoroughly overcome the evaporation issue that commonly exists in polydimethylsiloxane (PDMS)-based dPCR chips. With these two innovations, the ddPCR experiment could be performed in a robust manner, and shows a promising potential in the development of real-time ddPCR technique. These features may therefore enable the wide application of PIPDA-based ddPCR in various fields.