RESUMEN
The main challenges faced by aqueous rechargeable nickel-zinc batteries are their comparatively low energy density and poor cycling stability. Moreover, the preparation procedures of these cathodes are complex and not easily scalable. Herein, we utilized MXene to improve the electrodeposition preparation of NiCo layered double hydroxides (LDH). Benefiting from the improved interfacial contact between nickel foam (NF) and platting solution and the enhanced ionic conductivity of platting product based on MXene additives, the resulting binder-free NiCo LDH electrode can achieve ultrahigh areal loading (~65 mg cm-2) with abundant active surface for redox reactions and maintained short transport pathway for ion diffusion and charge transfer. Furthermore, the as-fabricated alkaline NiCo LDH-based battery delivers high discharge capacity, up to 20.2 mAh cm-2 (311 mAh g-1), accompanied by remarkable rate performance (9.6 mAh cm-2 or 148 mAh g-1 at 120 mA cm-2). Due to the high structural and chemical stability of MXenes/LDH-based electrode, excellent cycling life can also be achieved with 88.6% capacity retention after 10000 cycles. In addition, ultrahigh areal energy density (31.2 mWh cm-2) and gravimetric energy density (465 Wh kg-1) can be simultaneously achieved. This work has inspired the design of advanced cathode materials to develop high-performance aqueous zinc batteries.
RESUMEN
Sulfur is a promising conversion-type cathode for zinc batteries (ZBs) due to its high discharge capacity and cost-effectiveness. However, the redox conversion of multivalent S in ZBs is still limited, only having achieved S0/S2- redox conversion with low discharge voltage and poor reversibility. This study presents significant progress by demonstrating, for the first time, the reversible S2-/S4+ redox behavior in ZBs with up to six-electron transfer (with an achieved discharge capacity of ≈1284 mAh g-1) using a highly concentrated ClO4 --containing electrolyte. The developed succinonitrile-Zn(ClO4)2 eutectic electrolyte stabilizes the positive-valence S compound and contributes to an ultra-low polarization voltage. Notably, the achieved flat discharge plateaus demonstrate the highest operation voltage (1.54 V) achieved to date in ZnâS batteries. Furthermore, the high-voltage ZnâS battery exhibits remarkable conversion dynamics, excellent cycling performance (85.7% capacity retention after 500 cycles), high efficiency (98.4%), and energy density (527 Wh kg S -1). This strategy of positive-valence conversion of sulfur represents a significant advancement in understanding sulfur chemistry in batteries and holds promise for future high-voltage sulfur-based batteries.
RESUMEN
Zinc metal is recognized as the most promising anode for aqueous energy storage but suffers from severe dendrite growth and poor reversibility. However, the coulombic efficiency lacks specificity for zinc dendrite growth, particularly in Zn||Zn symmetric cells. Herein, a novel indicator (fD) based on the characteristic crystallization peaks is proposed to evaluate the growth and distribution of zinc dendrites. As a proof of concept, triethylenetetramine (TETA) is adopted as an electrolyte additive to manipulate the zinc flux for uniform deposition, with a corroborating low fD value. A highly durable zinc symmetric cell is achieved, lasting over 2500 h at 10 mA cm-2 and 400 h at a large discharge of depth (10 mA cm-2, 10 mAh cm-2). Supported by the low fD value, the Zn||TETA-ZnSO4||MnO2 batteries overcome the sudden short circuit and fast capacity fading. The study provides a feasible method to evaluate zinc dendrites and sheds light on the design of highly reversible zinc anodes.
RESUMEN
Quinone-based electrodes using carbonyl redox reactions are promising candidates for aqueous energy storage due to their high theoretical specific capacity and high-rate performance. However, the proton storage manners and their influences on the electrochemical performance of quinone are still not clear. Herein, we reveal that proton storage could determine the products of the enol conversion and the electrochemical stability of the organic electrode. Specifically, the protons preferentially coordinated with the prototypical pyrene-4,5,9,10-tetraone (PTO) cathode, and increasing the proton concentration in the electrolyte can improve its working potentials and cycling stability by tailoring the enol conversion reaction. We also found that exploiting Al2(SO4)3 as a pH buffer can increase the energy density of the Zn||PTO batteries from 242.8 to 284.6 Wh kg-1. Our research has a guiding significance for emphasizing proton storage of organic electrodes based on enol conversion reactions and improving their electrochemical performance.
RESUMEN
Residual solvents in vinylidene fluoride (VDF)-based solid polymer electrolytes (SPEs) have been recognized as responsible for their high ionic conductivity. However, side reactions by the residual solvents with the lithium (Li) metal induce poor stability, which has been long neglected. This study proposes a strategy to achieve a delicate equilibrium between ion conduction and electrode stability for VDF-based SPEs. Specifically, 2,2,2-trifluoro-N,N-dimethylacetamide (FDMA) is developed as the nonside reaction solvent for poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF)-based SPEs, achieving both high ionic conductivity and significantly improved electrochemical stability. The developed FDMA solvent fosters the formation of a stable solid electrolyte interphase (SEI) through interface reactions with Li metal, effectively mitigating side reactions and dendrite growth on the Li metal electrode. Consequently, the Li||Li symmetric cells and Li||LiFePO4 cells demonstrate excellent cycling performance, even under limited Li (20 µm thick) supply and high-loading cathodes (>10 mg cm-2, capacity >1 mAh cm-2) conditions. The stable Li||LiCoO2 cells operation with a cutoff voltage of 4.48 V indicates the high-voltage stability of the developed SPE. This study offers valuable insights into the development of advanced VDF-based SPEs for enhanced lithium metal battery performance and longevity.
RESUMEN
The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0â V, high ionic conductivity, Zn2+-selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75â V. More interesting, the discharge plateaus of ~1.33â V, previously assigned as the co-intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra-flat voltage plateau. Furthermore, with a distinct three-step electrochemical energy storage process, a high areal capacity of 1.8â mAh cm-2 and high specific energy of 0.858â Wh cm-2, even at a low MnO2 loading mass of 0.5â mg cm-2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.
RESUMEN
With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, CâH Br hydrogen bonds, and PbâI Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.
RESUMEN
As the need for sustainable battery chemistry grows, non-metallic ammonium ion (NH4 + ) batteries are receiving considerable attention because of their unique properties, such as low cost, nontoxicity, and environmental sustainability. In this study, the solvation interactions between NH4 + and solvents are elucidated and design principles for NH4 + weakly solvated electrolytes are proposed. Given that hydrogen bond interactions dominate the solvation of NH4 + and solvents, the strength of the solvent's electrostatic potential directly determines the strength of its solvating power. As a proof of concept, succinonitrile with relatively weak electronegativity is selected to construct a metal-free eutectic electrolyte (MEE). As expected, this MEE is able to significantly broaden the electrochemical stability window and reduce the solvent binding energy in the solvation shell, which leads to a lower desolvation energy barrier and a fast charge transfer process. As a result, the as-constructed NH4 -ion batteries exhibit superior reversible rate capability (energy density of 65 Wh kg-1 total active mass at 600 W kg-1 ) and unprecedent long-term cycling performance (retention of 90.2% after 1000 cycles at 1.0 A g-1 ). The proposed methodology for constructing weakly hydrogen bonded electrolytes will provide guidelines for implementing high-rate and ultra-stable NH4 + -based energy storage systems.
RESUMEN
Uncontrollable dendrite formation in the Zn anode is the bottleneck of the commercialization of rechargeable aqueous zinc-based batteries (RAZBs). Interface, the location of the charge transfer process occuring, can significantly affect the further morphology evolution in ways that have not yet been fully comprehended, for example, the crystal facet and orientation of the coating layer. In this study, we demonstrated that the morphology and kinetics of the Zn anode could be tuned by the crystal facet. The fabricated textured ZnSe (T-ZnSe) layer can significantly enhance the reaction kinetics and induce uniform (0002)Zn deposition. In stark contrast, the polycrystalline P-ZnSe coating hinders the charge transfer process at the interface. With this T-ZnSe@Zn as the anode, the full cell with an I2 cathode and a practical areal capacity (2 mAh cm-2) can work well for 900 cycles. The effectiveness of this anode has also been testified by a pouch cell with an overall capacity of 150 mAh. This research contributes to the understanding of the interface and the feasible strategy for the practical application of the Zn anode.
RESUMEN
Chalcogens, especially tellurium (Te), as conversion-type cathodes possess promising prospects for zinc batteries (ZBs) with potential rich valence supply and high energy density. However, the conversion reaction of Te is normally restricted to the Te2-/Te0 redox with a low voltage plateau at â¼0.59 V (vs Zn2+/Zn) rather than the expected positive valence conversion of Te0 to Ten+, inhibiting the development of Te-based batteries toward high output voltage and energy density. Herein, the desired reversible Te2-/Te0/Te2+/Te4+ redox behavior with up to six-electron transfer was successfully activated by employing a highly concentrated Cl--containing electrolyte (Cl- as strong nucleophile) for the first time. Three flat discharge plateaus located at 1.24, 0.77, and 0.51 V, respectively, are attained with a total capacity of 802.7 mAh g-1. Furthermore, to improve the stability of Ten+ products and enhance the cycling stability, a modified ionic liquid (IL)-based electrolyte was fabricated, leading to a high-performance Znâ¥Te battery with high areal capacity (7.13 mAh cm-2), high energy density (542 Wh kgTe-1 or 227 Wh Lcathdoe+anode-1), excellent cycling performance, and a low self-discharge rate based on 400 mAh-level pouch cell. The results enhance the understanding of tellurium chemistry in batteries, substantially promising a remarkable route for advanced ZBs.
RESUMEN
The development of flexible lithium-ion batteries (LIBs) imposes demands on energy density and high mechanical durability simultaneously. Due to the limited deformability of electrodes, as well as the flat and smooth surface of the metal current collectors, stable/durable/reliable contact between electrode materials and the current collectors remains a challenge, in particular, for electrodes with high loading mass and heavily deformed batteries. Binders play an essential role in binding particles of electrode materials and adhering them to current collectors. Herein, inspired by spider silk, a binder for flexible LIBs is developed, which equips a cross-linked supramolecular poly(urethane-urea) to the polyacrylic acid. The binder imparts super high elastic restorability originating from the meticulously engineered hydrogen-bonding segments as well as extraordinary adhesion. The developed binder provides excellent flexibility and intact electrode morphologies without disintegration even when the electrode is largely deformed, enabling a stable cycling and voltage output even when the batteries are put under tough dynamic deformation tests. The flexible LIBs exhibit a high energy density of 420 Wh L-1 , which is remarkably higher than reported numbers. The unique binder design is greatly promising and offers a valuable material solution for LIBs with high-loading mass and flexible designs.
RESUMEN
The chlorine-based redox reaction (ClRR) could be exploited to produce secondary high-energy aqueous batteries. However, efficient and reversible ClRR is challenging, and it is affected by parasitic reactions such as Cl2 gas evolution and electrolyte decomposition. Here, to circumvent these issues, we use iodine as positive electrode active material in a battery system comprising a Zn metal negative electrode and a concentrated (e.g., 30 molal) ZnCl2 aqueous electrolyte solution. During cell discharge, the iodine at the positive electrode interacts with the chloride ions from the electrolyte to enable interhalogen coordinating chemistry and forming ICl3-. In this way, the redox-active halogen atoms allow a reversible three-electrons transfer reaction which, at the lab-scale cell level, translates into an initial specific discharge capacity of 612.5 mAh gI2-1 at 0.5 A gI2-1 and 25 °C (corresponding to a calculated specific energy of 905 Wh kgI2-1). We also report the assembly and testing of a Zn | |Cl-I pouch cell prototype demonstrating a discharge capacity retention of about 74% after 300 cycles at 200 mA and 25 °C (final discharge capacity of about 92 mAh).
RESUMEN
Electrolyte environments, including cations, anions, and solvents are critical for the performance delivery of cathodes of batteries. Most works focused on interactions between cations and cathode materials, in contrast, there is a lack of in-depth research on the correlation between anions and cathodes. Here, we systematically investigated how anions manipulate the coulombic efficiency (CE) of cathodes of zinc batteries. We take intercalation-type V2 O5 and conversion-type I2 cathodes as typical cases for profound studies. It was found that electronic properties of anions, including charge density and its distribution, can tune conversion or intercalation reactions, leading to significant CE differences. Using operando visual Raman microscopy and theoretical simulations, we confirm that competitive coordination between anions and I- can regulate CEs by modulating polyiodide diffusion rates in Zn-I2 cells. In Zn-V2 O5 cells, anion-tuned solvation structures vastly affect CEs through varying Zn2+ intercalation kinetics. Conversion I2 cathode achieves a 99 % CE with highly electron-donating anions, while anions with preferable charge structures that interact strongly with Zn2+ afford an intercalation V2 O5 a nearly 100 % CE. Understanding the mechanism of anion-governed CEs will help us evaluate compatibility of electrolytes with electrodes, thus providing a guideline for anion selection and electrolyte design for high-energy, long-cycling zinc batteries.
RESUMEN
Aqueous zinc metal batteries are appealing candidates for grid energy storage. However, the inadequate electrochemical reversibility of the zinc metal negative electrode inhibits the battery performance at the large-scale cell level. Here, we develop practical ampere-hour-scale aqueous Zn metal battery pouch cells by engineering the electrolyte solution. After identifying the proton reduction as the primary source of H2 evolution during Zn metal electrodeposition, we design an electrolyte solution containing reverse micelle structures where sulfolane molecules constrain water in nanodomains to hinder proton reduction. Furthermore, we develop and validate an electrochemical testing protocol to comprehensively evaluate the cell's coulombic efficiency and zinc metal electrode cycle life. Finally, using the reverse micelle electrolyte, we assemble and test a practical ampere-hour Zn||Zn0.25V2O5â¢nH2O multi-layer pouch cell capable of delivering an initial energy density of 70 Wh L-1 (based on the volume of the cell components), capacity retention of about 80% after 390 cycles at 56 mA g-1cathode and ~25 °C and prolonged cycling for 5 months at 56 mA g-1cathode and ~25 °C.
RESUMEN
The operating temperature of batteries is an essential consideration in actual applications. Understanding the temperature dependence is conducive to battery design. The experience in lithium-ion batteries (LIBs) indicates that the dendrite issue is exacerbated at lower temperatures and suppressed at higher temperatures. In this study, we revealed the dendrite evolution in aqueous rechargeable zinc-based batteries (RZBs), for which the opposite temperature dependence was observed. Detailed investigations elucidate that the degree of matching of the interface reaction rate and ion diffusivity, together with side reactions, are the key factors that determine the cycling performance. The different properties of organic and aqueous electrolytes result in a reversed temperature dependence. We further conducted a detailed investigation of hybrid electrolytes (organic and aqueous) for balancing the ion diffusivity and side reactions to broaden the working temperature window for RZBs. This work reveals a completely opposite temperature dependence for LIBs and RZBs and discloses the underlying mechanism, reminding one of the differences between LIBs and RZBs in many aspects.
Asunto(s)
Etnicidad , Litio , Humanos , Temperatura , Iones , ZincRESUMEN
Constructing a reliable solid-electrolyte interphase (SEI) is imperative for enabling highly reversible zinc metal (Zn0 ) electrodes. Contrary to conventional "bulk solvation" mechanism, we found the SEI structure is dominated by electric double layer (EDL) adsorption. We manipulate the EDL adsorption and Zn2+ solvation with ether additives (i.e. 15-crown-5, 12-crown-4, and triglyme). The 12-crown-4 with medium adsorption on EDL leads to a layer-structured SEI with inner inorganic ZnFx /ZnSx and outer organic C-O-C components. This structure endows SEI with high rigidness and strong toughness enabling the 100â cm2 Zn||Zn pouch cell to exhibit a cumulative capacity of 4250â mAh cm-2 at areal-capacity of 10â mAh cm-2 . More importantly, a 2.3â Ah Zn||Zn0.25 V2 O5 â n H2 O pouch cell delivers a recorded energy density of 104â Wh Lcell -1 and runs for >70â days under the harsh conditions of low negative/positive electrode ratio (2.2 : 1), lean electrolyte (8â g Ah-1 ), and high-areal-capacity (≈13â mAh cm-2 ).
RESUMEN
The introduction of inorganic crystallites into a solid-electrolyte interphase (SEI) is an effective strategy for improving the reversibility of the Zn metal anode (ZMA). However, the structure-performance relationship of the SEI is not fully understood because the existing forms of its inorganic and organic components in their pristine states are not resolved. Here, a highly effective SEI is constructed for ZMA using a bisolvent electrolyte and resolved its composition/structure by cryogenic transmission electron microscopy. This highly fluorinated SEI with amorphous inorganic ZnFx uniformly distributed in the organic matrix is largely different from the common mosaic and multilayer SEIs with crystalline inorganics. It features improved structural integrity, mechanical toughness, and Zn2+ ion conductivity. Consequently, the ZMA exhibits excellent reversibility with an enhanced plating/stripping Coulombic efficiency of 99.8%. The ZMA-based full cell achieves a high Zn utilization ratio of 54% at a practical areal capacity of 3.2 mAh cm-2 and stable cycling over 1800 h during which the accumulated capacity reached 5600 mAh cm-2 . This research highlights the detailed structure and composition of amorphous SEIs for highly reversible metal anodes.
RESUMEN
Rechargeable calcium-ion batteries are intriguing alternatives for use as post-lithium-ion batteries. However, the high charge density of divalent Ca2+ establishes a strong electrostatic interaction with the hosting lattice, which results in low-capacity Ca-ion storage. The ionic radius of Ca2+ further leads to sluggish ionic diffusion, hindering high-rate capability performances. Here, we report 5,7,12,14-pentacenetetrone (PT) as an organic crystal electrode active material for aqueous Ca-ion storage. The weak π-π stacked layers of the PT molecules render a flexible and robust structure suitable for Ca-ion storage. In addition, the channels within the PT crystal provide efficient pathways for fast ionic diffusion. The PT anode exhibits large specific capacity (150.5 mAh g-1 at 5 A g-1), high-rate capability (86.1 mAh g-1 at 100 A g-1) and favorable low-temperature performances. A mechanistic study identifies proton-assisted uptake/removal of Ca2+ in PT during cycling. First principle calculations suggest that the Ca ions tend to stay in the interstitial space of the PT channels and are stabilized by carbonyls from adjacent PT molecules. Finally, pairing with a high-voltage positive electrode, a full aqueous Ca-ion cell is assembled and tested.
RESUMEN
Cathodes of rechargeable Zn batteries typically face the issues of irreversible phase transformation, structure collapse, and volume expansion during repeated charge/discharge cycles, which result in an increased transfer resistance and poor long-term cycling stability. Herein, a facile F doping strategy is developed to boost the cycling stability of nickel cobalt carbonate hydroxide (NiCo-CH) cathode. Benefiting from the extremely high electronegativity, the phase and morphology stabilities as well as the electrical conductivity of NiCo-CH are remarkably enhanced by F incorporation (NiCo-CH-F). Phase interface and amorphous microdomains are also introduced, which are favorable for the electrochemical performance of cathode. Benefiting from these features, NiCo-CH-F delivers a high capacity (245 mA h g-1 ), excellent rate capability (64% retention at 8 A g-1 ), and outstanding cycling stability (maintains 90% after 10 000 cycles). Moreover, the quasi-solid-state battery also manifests superior cycling stability (maintains 90% after 7200 cycles) and desirable flexibility. This work offers a general strategy to boost the cycling stability of cathode materials for aqueous Zn batteries.