Advancing injection force modeling and viscosity-dependent injectability evaluation for prefilled syringes.

The development of PFS requires a detailed understanding of the forces occurring during the drug administration process and patient's capability. This research describes an advanced mathematic injection force model that consisting hydrodynamic force and friction force. The hydrodynamic force follows the basic law of Hagen-Poiseuille but refines the modeling approach by delving into specific properties of drug viscosity (Newtonian and Shear-thinning) and syringe shape constant, while the friction force was accounted from empty barrel injection force. Additionally, we take actual temperature of injection into consideration, providing more accurate predication. The results show that the derivation of the needle dimension constant and the rheological behavior of the protein solutions are critical parameters. Also, the counter pressure generated by the tissue has been considered in actual administration to address the issue of the inaccuracies of current injection force evaluation preformed in air, especially when the viscosity of the injected drug solution is below 9.0 cP (injecting with 1 mL L PFS staked with 29G ½ inch needle). Human factor studies on patients' capability against medication viscosity filled the gap in design space of PFS drug product and available viscosity data in very early phase.

Flow induced dispersion analysis rapidly quantifies proteins in human plasma samples.

Rapid and sensitive quantification of protein based biomarkers and drugs is a substantial challenge in diagnostics and biopharmaceutical drug development. Current technologies, such as ELISA, are characterized by being slow (hours), requiring relatively large amounts of sample and being subject to cumbersome and expensive assay development. In this work a new approach for quantification based on changes in diffusivity is presented. The apparent diffusivity of an indicator molecule interacting with the protein of interest is determined by Taylor Dispersion Analysis (TDA) in a hydrodynamic flow system. In the presence of the analyte the apparent diffusivity of the indicator changes due to complexation. This change in diffusivity is used to quantify the analyte. This approach, termed Flow Induced Dispersion Analysis (FIDA), is characterized by being fast (minutes), selective (quantification is possible in a blood plasma matrix), fully automated, and being subject to a simple assay development. FIDA is demonstrated for quantification of the protein Human Serum Albumin (HSA) in human plasma as well as for quantification of an antibody against HSA. The sensitivity of the FIDA assay depends on the indicator-analyte dissociation constant which in favourable cases is in the sub-nanomolar to picomolar range for antibody-antigen interactions.

Detection of unlabeled particles in the low micrometer size range using light scattering and hydrodynamic 3D focusing in a microfluidic system.

In this paper, we describe a microfluidic device composed of integrated microoptical elements and a two-layer microchannel structure for highly sensitive light scattering detection of micro/submicrometer-sized particles. In the two-layer microfluidic system, a sample flow stream is first constrained in the out-of-plane direction into a narrow sheet, and then focused in-plane into a small core region, obtaining on-chip three-dimensional (3D) hydrodynamic focusing. All the microoptical elements, including waveguides, microlens, and fiber-to-waveguide couplers, and the in-plane focusing channels are fabricated in one SU-8 layer by standard photolithography. The channels for out-of-plane focusing are made in a polydimethylsiloxane (PDMS) layer by a single cast using a SU-8 master. Numerical and experimental results indicate that the device can realize 3D hydrodynamic focusing reliably over a wide range of Reynolds numbers (0.5 < Re < 20). Polystyrene particles of three sizes (2, 1, and 0.5 µm) were measured in the microfluidic device with integrated optics, demonstrating the feasibility of this approach to detect particles in the low micrometer size range by light scattering detection.

Microchip-based small, dense low-density lipoproteins assay for coronary heart disease risk assessment.

Small, dense low-density lipoprotein (sdLDL) has been accepted as an emerging cardiovascular risk factor, and there has been an increasing interest in analytical methods for sdLDL profiling for diagnosis. Serum sdLDL may be measured by different laboratory techniques, but all these methods are laborious, time-consuming, and costly. Recently, we have demonstrated that a low-temperature bonding of quartz microfluidic chips for serum lipoproteins analysis (Zhuang, G., Jin, Q., Liu, J., Cong, H. et al., Biomed. Microdevices 2006, 8, 255-261). In contrast to this previous study, we chose SDS as anionic surfactant to modify both lipoproteins and the channel surface to minimize lipoprotein adsorption and improve the resolution of lipoprotein separation. Two major LDL subclass patterns including large, buoyant LDL (lLDL), sdLDL, and high-density lipoprotein (HDL) were effectively separated with high reproducibility. RSD values of the migration time (min) and peak areas of standard LDL and HDL were 6.28, 4.02, 5.02, and 2.5%, respectively. Serum lipoproteins of 15 healthy subjects and 15 patients with coronary heart disease (CHD) were separated by microchip CE. No peaks of sdLDL were detected in serum samples of healthy subjects while sdLDL fractional peaks were observed in patients' entire serum samples. These results suggested that the microchip-based sdLDLs assay was a simple, rapid, and highly efficient technique and significantly improved the analysis of CHD risk factors.

Microchip-based capillary electrophoresis for determination of lactate dehydrogenase isoenzymes.

This article describes a novel microchip-based capillary electrophoresis and oncolumn enzymatic reaction analysis protocol for lactate dehydrogenase (LDH) isoenzymes with a home-made xenon lamp-induced fluorescence detection system. A microchip integrated with a temperature-control unit is designed and fabricated for low-temperature electrophoretic separation of LDH isoenzymes, optimal enzyme reaction temperature control, and product detection. A four-step operation and temperature control are employed for the determination of LDH activity by on-chip monitoring of the amount of incubation product of NADH during the fixed incubation period and at a fixed temperature. Experiments on the determination of LDH standard sample and serum LDH isoenzymes from a healthy adult donor are carried out. The results are comparable with those obtained by conventional CE. Shorter analysis times and a more stable and lower background baseline can be achieved. The efficient separation of different LDH forms indicates the potential of microfluidic devices for isoenzyme assay.

Numerical analysis of an electrokinetic double-focusing injection technique for microchip CE.

The injection techniques in electrophoresis microchips play an important role in the sample-handling process, whose characteristics determine the separation performance achieved, and the shape of a sample plug delivered into the separation channel has a great impact on the high-quality separation performance as well. This paper describes a numerical investigation of different electrokinetic injection techniques to deliver a sample plug within electrophoresis microchips. A novel double-focusing injection system is designed and fabricated, which involves four accessory arm channels in which symmetrical focusing potentials are loaded to form a unique parallel electric field distribution in the intersection of injection channel and separation channel. The parallel electric field effectuates virtual walls to confine the spreading of a sample plug at the intersection and prevents sample leakage into separation channel during the dispensing step. The key features of this technique over other injection techniques are the abilities to generate regular and nondistorted shape of sample plugs and deliver the variable-volume sample plugs by electrokinetic focusing. The detection peak in the proposed injection system is uniform regardless of the position of the detection probe in the separation channel, and the peak resolution is greatly enhanced. Finally, the double-focusing injection technique shows the flexibility in detection position and ensures improved signal sensitivity with good peak resolution due to the delivered high-quality sample plug.

A low temperature bonding of quartz microfluidic chip for serum lipoproteins analysis.

A low-temperature bonding method for microfabrication of quartz microfluidic chips has been developed. The bonding process involved two steps: pre-bonding and post-annealing at low temperature. The bonding quality was evaluated by measuring the shear force at bonding interface and the electrical properties of the chips. Shear force of 5.66 MPa (566 N/cm(2)) was obtained in a bonded chip after a post-annealing at 200 degrees C for 6 h. We owe the strong bonding strength to the formation of Si-O-Si bonds at the bonding interface during the post-annealing stage. The bonding procedures were not sensitive to surrounding and could be performed in a routine laboratory without clean room conditions. The performance of the fabricated microfluidic chips was tested by capillary zone electrophoresis (CZE) of serum lipoproteins with laser-induced fluorescence (LIF). The low-density (LDL) and high-density (HDL) lipoproteins in the serum was separated completely by using tricine buffer with methylglucamine.