AlN Production in Co-Flow Filtration Mode at Low Pressures.

In this work, the process for obtaining aluminum nitride in the combustion mode of co-flow filtration of a nitrogen-argon mixture was investigated. The combustion of granules consisting of aluminum and aluminum nitride as an inert diluent was studied under conditions of co-current filtration in a flow of nitrogen and a nitrogen-argon mixture in the range of a specific flow rate of 1.5-5.0 cm3/(s∙cm2). It was found that the specific flow rate of the gas mixture and the amount of argon in the nitrogen-argon mixture had a significant effect on the rate and the temperature of combustion. The structure and phase composition of the synthesis products were studied. The maximum achieved yield of the AlN phase was 95 wt.%. Moreover, this method is energy efficient and allows the production of metal nitrides without the use of high-pressure reactors.

Planetary Milling and Self-Propagating High-Temperature Synthesis of Al-TiB2 Composites.

The paper explores the influence of planetary milling on the temperature and velocity of Al-Ti-B powder mixture combustion and also on the structure and phase composition of the reaction products. It is found that the time increase of planetary milling modifies the structure of the powder particles, improves the density of compacted specimens, and increases the temperature and velocity of their combustion. These time dependences are extreme, with maximum values during 180 s planetary milling. Experiments show that the reaction products consist of an aluminum matrix with uniformly distributed particles of titanium diboride of not over 1 µm in size. The average particle size changes with the increase in the time of the planetary milling of the initial powder mixture.

Combustion Synthesis of Composition Ferroalloys.

The main objective of this paper is to present results of the research in the development of a specialized self-propagating high-temperature synthesis (SHS) technology for ferroalloy composites, as applied to steelmaking. The problem of creating such a production cycle has been solved by developing a new approach to the practical implementation of self-propagating high-temperature synthesis, as applied to metallurgy. The metallurgical variation of SHS is based on the use of different metallurgic alloys (including waste in the form of dust from ferroalloy production) as basic raw materials in the new process. Here, the process of synthesis by combustion is realized through exothermic exchange reactions. The process produces a composite, based on inorganic compositions with a bond of iron and/or alloy based on iron. It has been shown that in terms of the aggregate state of initial reagents, metallurgical SHS processes are either gasless or gas-absorbing. Combustion regimes significantly differ when realized in practice. To organize the metallurgical SHS process in weakly exothermic systems, different variations of the thermal trimming principle are used. In the present study, self-propagating high-temperature synthesis of ferrovanadium nitride, which is widely used in steel alloying, was investigated. It has been shown that the phase composition of the initial alloy has a profound impact on the regular patterns in ferrovanadium combustion in nitrogen and on the mechanism itself. During the nitriding of σ-(Fe-V), process activation is taking place. The activation is due to the transformation of the intermetallide into an α-solid solution, when the temperature of phase transition is reached (~1200 °C). The composite structure of the products of ferrovanadium is nitriding by the fusion of particles-droplets composed of molten Fe and solid VN.