Impact of Confinement and Zwitterionic Ligand Chemistry on Ion-Ion Selectivity of Functionalized Nanopores.

Membranes incorporating zwitterionic chemistries have recently emerged as promising candidates for facilitating challenging ion-ion separations. Transport of ions in such membranes predominantly occurs in hydrated nanopores lined with zwitterionic monomers. To shed light on the physics of ion-ion selectivity underlying such materials, we conducted molecular dynamics simulations of sodium halide transport in model nanopores grafted with sulfobetaine methacrylate molecules. Our results reveal that in both functionalized and unfunctionalized nanopores smaller ions prefer to reside near the pore center, while the larger ions tend to reside near the pore walls. An enhancement in the selective transport of larger anions is observed within the unfunctionalized nanopores relative to that in salt-in-water solutions. Upon functionalization of the nanopores with zwitterions (ZIs), the disparities in the anionic distribution profiles within the pores coupled with differences in the anion-ZI interactions result in a slowdown of larger anions relative to smaller anions. Increasing the ZI grafting density exacerbates these effects, further promoting the selective transport of smaller anions. Our results suggest that selectivity toward large anions can be realized by using nanoporous membranes with ZI content that is high enough to facilitate ion/water partitioning into the pores while preserving the characteristic tendency of the unfunctionalized pores to facilitate faster transport of the larger anions. On the other hand, selectivity toward smaller anions can be achieved by targeting ZI content within the pores that is high enough to significantly slow down the transport of large anions but not high enough to hinder the partitioning of ions/water molecules into the pore due to steric effects.

Mechanisms of ion transport in lithium salt-doped zwitterionic polymer-supported ionic liquid electrolytes.

Recent experimental results have demonstrated that zwitterionic ionogel comprised of polyzwitterion (polyZI)-supported lithium salt-doped ionic liquid exhibits improved conductivities and lithium transference numbers than the salt-doped base ionic liquid electrolyte (ILE). However, the underlying mechanisms of such observations remain unresolved. In this work, we pursued a systematic investigation to understand the impact of the polyZI content and salt concentration on the structural and dynamic properties of the poly(MPC) ionogel of our model polyZI ionogel, poly(2-methacryloyloxyethyl phosphorylcholine) [poly(MPC)] supported LiTFSI/N-butyl-N-methylpyrrolidinium TFSI base ionic liquid electrolyte. Our structural analyses show strong lithium-ZI interaction consistent with the physical network characteristic observed in the experiments. An increase in polyZI content leads to an increased fraction of Li+ ions coordinated with the polyZI. In contrast, an increase in salt concentration leads to a decreased fraction of Li+ ions coordinated with the polyZI. The diffusivities of the mobile ions in the poly(MPC) ionogel were found to be lower than the base ILE in agreement with experiments at T > 300 K. Analysis of ion transport mechanisms shows that lithium ions within the poly(MPC) ionogel travel via a combination of structural, vehicular diffusion, as well as hopping mechanism. Finally, the conductivity trend crossover between the poly(MPC) ionogel and the base ILE was rationalized via a temperature study that showed that the base ILE ions are influenced more by the variation of temperature when compared to the poly(MPC) ions.

Role of Dielectric Drag in Circumventing the Solubility-Diffusivity Trade-off in Zwitterionic Copolymer Membranes.

Recent experiments have revealed that random zwitterionic amphiphilic copolymer (r-ZAC) membranes exhibit excellent Cl-/F- permselectivity circumventing the solubility-diffusivity trade-off. We conducted molecular dynamics simulations to investigate the origin of the experimental results on the transport of sodium halides in r-ZAC membranes. Our results indicate that the enhancement of Cl-/F- diffusivity selectivity in r-ZAC membranes (relative to that in bulk water) stems from the increase in dielectric drag dominating over the increase in Stokes drag, zwitterionic group-induced steric hindrance, and ion-polymer interactions. The importance of dielectric drag is further demonstrated by showing that reduction in ionic charges leads to a complete reversal of the diffusivity selectivity trends. We conclude that leveraging the impact of hydrophilic nanoconfinement on the dynamics of water can be utilized as a strategy to simultaneously augment solubility selectivity and diffusivity selectivity for separations, wherein the flux of the larger ionic species is desired over that of the smaller.

The influence of counterion structure identity on conductivity, dynamical correlations, and ion transport mechanisms in polymerized ionic liquids.

We used equilibrium and non-equilibrium atomistic simulations to probe the influence of anion chemistry on the true conductivity, dynamical correlations, and ion transport mechanisms in polymeric ionic liquids. An inverse correlation was found between anion self-diffusivities, ionic mobilities, and the anion size for spherical anions. While some larger asymmetric anions had higher diffusivities than smaller spherical anions, their diffusivities and mobilities did not exhibit a direct correlation to the anion volumes. The conductivity and anion dynamical correlations also followed the same trends as displayed by the diffusivity and mobility of anions. All the systems we examined displayed positively correlated motion among anions, suggesting a contribution that enhances the conductivity beyond the ideal Nernst-Einstein value. Analysis of ion transport mechanisms demonstrated very similar hopping characteristics among the spherical anions despite differences in their sizes.

Impact of Ion-Ion Correlated Motion on Salt Transport in Solvated Ion Exchange Membranes.

The influence of dynamical ion-ion correlations and ion pairing on salt transport in ion exchange membranes remain poorly understood. In this study, we use the framework of Onsager transport coefficients within atomistic molecular dynamics simulations to study the impact of ion-ion correlated motion on salt transport in hydrated polystyrene sulfonate membranes and compare with the results from aqueous salt solutions. At sufficiently high salt concentrations, cation-anion dynamical correlations exert a significant influence on both salt diffusivities and conductivities. Anion-anion distinct correlations, arising from the imbalance between the concentration of free (mobile) cations and anions, and the retarding effect of the fixed charge groups on cations, proves to be an additional important feature for polymer membranes. Our results demonstrate that dynamical correlations should become an important consideration in experimental measurements of salt diffusivities and conductivities for non-dilute salt solutions in polymer membranes.

Engineering Li/Na selectivity in 12-Crown-4-functionalized polymer membranes.

Lithium is widely used in contemporary energy applications, but its isolation from natural reserves is plagued by time-consuming and costly processes. While polymer membranes could, in principle, circumvent these challenges by efficiently extracting lithium from aqueous solutions, they usually exhibit poor ion-specific selectivity. Toward this end, we have incorporated host-guest interactions into a tunable polynorbornene network by copolymerizing 1) 12-crown-4 ligands to impart ion selectivity, 2) poly(ethylene oxide) side chains to control water content, and 3) a crosslinker to form robust solids at room temperature. Single salt transport measurements indicate these materials exhibit unprecedented reverse permeability selectivity (∼2.3) for LiCl over NaCl-the highest documented to date for a dense, water-swollen polymer. As demonstrated by molecular dynamics simulations, this behavior originates from the ability of 12-crown-4 to bind Na+ ions more strongly than Li+ in an aqueous environment, which reduces Na+ mobility (relative to Li+) and offsets the increase in Na+ solubility due to binding with crown ethers. Under mixed salt conditions, 12-crown-4 functionalized membranes showed identical solubility selectivity relative to single salt conditions; however, the permeability and diffusivity selectivity of LiCl over NaCl decreased, presumably due to flux coupling. These results reveal insights for designing advanced membranes with solute-specific selectivity by utilizing host-guest interactions.

Origins of Lithium/Sodium Reverse Permeability Selectivity in 12-Crown-4-Functionalized Polymer Membranes.

Direct lithium extraction via membrane separations has been fundamentally limited by lack of monovalent ion selectivity exhibited by conventional polymeric membranes, particularly between sodium and lithium ions. Recently, a 12-Crown-4-functionalized polynorbornene membrane was shown to have the largest lithium/sodium permeability selectivity observed in a fully aqueous system to date. Using atomistic molecular dynamics simulations, we reveal that this selectivity is due to strong interactions between sodium ions and 12-Crown-4 moieties, which reduce sodium ion diffusivity while leaving lithium ion mobility relatively unaffected. Moreover, the ion diffusivities in the membrane, when scaled by their respective solution diffusivities and free ion fractions, can be collapsed to an almost universal relationship depending on solvent volume fraction.

Polymerization-Induced Nanostructural Transitions Driven by In Situ Polymer Grafting.

Polymerization-induced structural transitions have gained attention recently due to the ease of creating and modifying nanostructured materials with controlled morphologies and length scales. Here, we show that order-order and disorder-order nanostructural transitions are possible using in situ polymer grafting from the diblock polymer, poly(styrene)-block-poly(butadiene). In our approach, we are able to control the resulting nanostructure (lamellar, hexagonally packed cylinders, and disordered spheres) by changing the initial block polymer/monomer ratio. The nanostructural transition occurs by a grafting from mechanism in which poly(styrene) chains are initiated from the poly(butadiene) block via the creation of an allylic radical, which increases the overall molecular weight and the poly(styrene) volume fraction. The work presented here highlights how the chemical process of converting standard linear diblock copolymers to grafted block polymers drives interesting and controllable polymerization-induced morphology transitions.