RESUMEN
PURPOSE: Total knee arthroplasty (TKA) stands as a primary intervention for severe knee ailments, yet concerns remain regarding postoperative patient satisfaction and flexion instability. This study aims to evaluate the in-vivo kinematics of medial-pivot (MP) and posterior-stabilised (PS) designs during step-up activity, in comparison to the kinematics of the nonoperated contralateral knee. METHODS: Sixteen patients with PS-TKA and 14 with MP-TKA were retrospectively examined. Clinical outcomes were assessed using patient-completed questionnaires. Motion during step-up was captured using a dual fluoroscopic system. Statistical analysis was applied to evaluate the in-vivo tibiofemoral six-degree-of-freedom kinematics and articular contact positions between the two groups. RESULTS: Despite being older, patients in the MP group reported higher postoperative subjective scores for weight-bearing functional activities. The axial rotation centres of MP-TKA located on the medial tibial plateau exhibited less variance compared to PS-TKA and contralateral knees. Compared to the contralateral knee (contralateral to medial-pivot [C-MP] or contralateral to posterior-stabilised [C-PS]), the MP group exhibited limited range of motion in terms of anteroposterior translation (MP: 3.6 ± 1.3 mm vs. C-MP: 7.4 ± 2.5 mm, p < 0.01) and axial rotation (MP: 6.6 ± 1.9° vs. C-MP: 10.3 ± 4.9°, p = 0.02), as well as in the PS group for anteroposterior translation (PS: 3.9 ± 1.7 mm vs. C-PS: 7.2 ± 3.7 mm, p < 0.01). CONCLUSION: The MP group with better postoperative ratings demonstrated a more stable MP axial rotation pattern during step-up activity compared to the PS group, underscoring the pivotal role of prosthetic design in optimising postoperative rehabilitation and functional recovery. LEVEL OF EVIDENCE: Level III.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Rango del Movimiento Articular , Soporte de Peso , Humanos , Artroplastia de Reemplazo de Rodilla/métodos , Femenino , Masculino , Estudios Retrospectivos , Anciano , Fenómenos Biomecánicos , Persona de Mediana Edad , Rotación , Articulación de la Rodilla/cirugía , Articulación de la Rodilla/fisiopatología , Diseño de Prótesis , Satisfacción del Paciente , Osteoartritis de la Rodilla/cirugía , Osteoartritis de la Rodilla/fisiopatología , Tibia/cirugía , Inestabilidad de la Articulación/fisiopatología , Resultado del TratamientoRESUMEN
OBJECTIVE: The femoral tunnel position is crucial to anatomic single-bundle anterior cruciate ligament (ACL) reconstruction, but the ideal femoral footprint position are mostly based on small-sized cadaveric studies and elderly patients with a single ethnic background. This study aimed to identify potential race- or gender-specific differences in the ACL femoral footprint location and ACL orientation, determine the correlation between the ACL orientation and the femoral footprint location. METHODS: Magnetic resonance images (MRIs) of 90 Caucasian participants and 90 matched Chinese subjects were used for reconstruction of three-dimensional (3D) femur and tibial models. ACL footprints were sketched by several experienced orthopedic surgeons on the MRI photographs. The anatomical coordinate system was applied to reflect the ACL footprint location and orientation of scanned samples. The femoral ACL footprint locations were represented by their distance from the origin in the anteroposterior (A/P) and distal-proximal (D/P) directions. The orientation of the ACL was described with the sagittal, coronal and transverse deviation angles. The ACL orientation and femoral footprint position were compared by the two-sided t-test. Multiple regression analysis was used to study the correlation between the orientation and femoral footprint position. RESULTS: The average femur footprint A/P position was -6.6 ± 1.6 mm in the Chinese group and -5.1 ± 2.3 mm in the Caucasian group, (p < 0.001). The average femur footprint D/P position was -2.8 ± 2.4 mm in Chinese and - 3.9 ± 2.0 mm in Caucasians, (p = 0.001). The Chinese group had a mean difference of a 1.5 mm (6.1%) more posterior and 1.1 mm (5.3%) more proximal in the position from the flexion-extension axis (FEA). And the males have a sagittal plane elevation about 4-5° higher than females in both racial groups. Furthermore, for every 1% (0.40 mm) increase in A/P and D/P values, the sagittal angle decreased by about 0.12° and 0.24°, respectively; the coronal angle decreased by about 0.10° and 0.30°, respectively. For every 1% (0.40 mm) increase in D/P value, the transverse angle increased by about 0.14°. CONCLUSION: The significant race- and gender-specific differences in the femoral footprint and orientation of the ACL should be taken in consideration during anatomic single-bundle ACL reconstruction. Furthermore, the quantitative relationship between the ACL orientation and the footprint location might provide some reference for surgeons to develop a surgical strategy in ACL single-bundle reconstruction and revision.
Asunto(s)
Ligamento Cruzado Anterior , Articulación de la Rodilla , Masculino , Femenino , Humanos , Anciano , Ligamento Cruzado Anterior/diagnóstico por imagen , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Factores Sexuales , Fémur/diagnóstico por imagen , Fémur/cirugía , Tibia/cirugía , Imagen por Resonancia Magnética/métodosRESUMEN
The purposes of this study were to propose a quantitative method of bearing overhang to minimize the effect of bearing spinning on mobile-bearing unicompartmental knee arthroplasty (MB UKA), suggest and apply safe bearing regions in daily activities. The overhang distance and area were calculated for neutral and spinning positions. The safe bearing regions were based on the relationship between bearing overhang and linear wear rate. Eleven patients were included in an in-vivo experiment under dual fluoroscopic imaging following medial MB UKA. The bearing position was tracked by minimal joint space width, and the bearing overhang was calculated accordingly. Due to an equal contribution of 1 mm increase in medial overhang and 30 mm2 overhang areato wear rate, the maximum effect of potential bearing spinning on medial overhang distance was approximately three times as large as the overhang area. The safe bearing distance and area regions were rectangles and arches with different scales for different size combinations of bearing, femoral and tibial components. The maximum bearing overhang area during lunge (R = 0.76, p = 0.006) and open-chain exercise (R = 0.68, p = 0.02) significantly correlated with the overhang area in standing. The overhang area can be an appropriate parameter for evaluating dislocation degree less affected by potential bearing spinning than the overhang distance in clinical practice. The corresponding safe overhang area regions were proposed for surgical planning and postoperative dislocation degree evaluation. The bearing overhang area in static standing posture can be a valuable reference to estimate the dynamic overhang area and dislocation degree during motion.
RESUMEN
In vitro biomechanical experiments utilizing cadaveric specimens are one of the most effective methods for rehearsing surgical procedures, testing implants, and guiding postoperative rehabilitation. Applying dynamic physiological muscle force to the specimens is a challenge to reconstructing the environment of bionic mechanics in vivo, which is often ignored in the in vitro experiment. The current work aims to establish a hardware platform and numerical computation methods to reproduce dynamic muscle forces that can be applied to mechanical testing on in vitro specimens. Dynamic muscle loading is simulated through numerical computation, and the inputs of the platform will be derived. Then, the accuracy and robustness of the platform will be evaluated through actual muscle loading tests in vitro. The tests were run on three muscles (gastrocnemius lateralis, the rectus femoris, and the semitendinosus) around the knee joint and the results showed that the platform can accurately reproduce the magnitude of muscle strength (errors range from -6.2% to 1.81%) and changing pattern (goodness-of-fit range coefficient ranges from 0.00 to 0.06) of target muscle forces. The robustness of the platform is mainly manifested in that the platform can still accurately reproduce muscle force after changing the hardware combination. Additionally, the standard deviation of repeated test results is very small (standard ranges of hardware combination 1: 0.34 N~2.79 N vs. hardware combination 2: 0.68 N~2.93 N). Thus, the platform can stably and accurately reproduce muscle forces in vitro, and it has great potential to be applied in the future musculoskeletal loading system.
RESUMEN
BACKGROUND: The aim of the present study was to identify potential race- or gender-specific differences in anterior cruciate ligament (ACL) tibial footprint location from the tibia anatomical coordinate system (tACS) origin, investigate the distances from the tibial footprint to the anterior root of the lateral meniscus (ARLM) and the medial tibial spine (MTS), determine how reliable the ARLM and MTS can be in locating the ACL tibial footprint, and assess the risk of iatrogenic ARLM injuries caused by using reamers with various diameters (7-10 mm). PATIENTS AND METHODS: Magnetic resonance images of 91 Chinese and 91 Caucasian subjects were used for the reconstruction of three-dimensional (3D) tibial and ACL tibial footprint models. The anatomical coordinate system was applied to reflect the anatomical locations of scanned samples. RESULTS: The average anteroposterior (A/P) tibial footprint location was 17.1 ± 2.3 mm and 20.0 ± 3.4 mm in Chinese and Caucasians, respectively (P < .001). The average mediolateral (M/L) tibial footprint location was 34.2 ± 2.4 mm and 37.4 ± 3.6 mm in Chinese and Caucasians, respectively (P < .001). The average difference between men and women was 2 mm in Chinese and 3.1 mm in Caucasians. The safe zone for tibial tunnel reaming to avoid ARLM injury was 2.2 mm and 1.9 mm away from the central tibial footprint in the Chinese and Caucasians, respectively. The probability of damaging the ARLM by using reamers with various diameters ranged from 0% for Chinese males with a 7 mm reamer to 30% in Caucasian females with a 10 mm reamer. CONCLUSIONS: The significant race- and gender-specific differences in the ACL tibial footprint should be taken in consideration during anatomic ACL reconstruction. The ARLM and MTS are reliable intraoperative landmarks for identifying the tibial ACL footprint. Caucasians and females might be more prone to iatrogenic ARLM injury. LEVEL OF EVIDENCE: III, cohort study. TRIAL REGISTRATION: This study has been approved by the ethical research committee of the General Hospital of Southern Theater Command of PLA under the code: [2019] No.10.
Asunto(s)
Ligamento Cruzado Anterior , Tibia , Masculino , Femenino , Humanos , Ligamento Cruzado Anterior/diagnóstico por imagen , Ligamento Cruzado Anterior/cirugía , Estudios de Cohortes , Factores Sexuales , Enfermedad IatrogénicaRESUMEN
Background: This study aimed to explore whether pre- or postoperative hip structures or surgical changes significantly influence hip range of motion (ROM) symmetry in patients with hip dysplasia during gait after total hip arthroplasty (THA) and provide possible surgical suggestions. Methods: Fourteen patients with unilateral hip dysplasia underwent computed tomography before and after surgery to create three-dimensional hip models. Pre- and postoperative acetabular and femoral orientations, hip rotation centers (HRC), and femoral lengths were measured. Bilateral hip ROM during level walking after THA was quantified using dual fluoroscopy. The ROM symmetry in flexion-extension, adduction-abduction, and axial rotation was calculated using the symmetry index (SI). The relationship between SI and the above anatomical parameters and demographic characteristics was tested using Pearson's correlation and linear regression. Results: The average SI values for flexion-extension, adduction-abduction, and axial rotation during gait were -0.29, -0.30, and -0.10, respectively. Significant correlations were detected mainly in the postoperative HRC position. A distally placed HRC was associated with increased SI values for adduction-abduction (R = -0.47, p = 0.045), while a medially placed HRC was associated with decreased SI values for axial rotation (R = 0.63, p = 0.007). A regression analysis indicated that horizontal HRC positions significantly determined axial rotational symmetry (R2 = 0.40, p = 0.015). Normal axial rotation SI values were achieved with HRC between 17â mm medially and 16â mm laterally. Conclusions: Postoperative HRC position was significantly correlated with gait symmetry in the frontal and transverse planes in patients with unilateral hip dysplasia after THA. Surgical reconstruction of the HRC to between 17â mm medially and 16â mm laterally may contribute to gait symmetry.
RESUMEN
This study aimed to compare the in-vivo kinematics and articular contact status between medial-pivot total knee arthroplasty (MP-TKA) and posterior stabilized (PS) TKA during weight-bearing single-leg lunge. 16 MP-TKA and 12 PS-TKA patients performed bilateral single-leg lunges under dual fluoroscopy surveillance to determine the in-vivo six degrees-of-freedom knee kinematics. The closest point between the surface models of the femoral condyle and the polyethylene insert was used to determine the contact position and area. The nonparametric statistics analysis was performed to test the symmetry of the kinematics between MP-TKA and PS-TKA. PS-TKA demonstrated a significantly greater range of AP translation than MP-TKA during high flexion (p = 0.0002). Both groups showed a significantly greater range of lateral compartment posterior translation with medial pivot rotation. The contact points of PS-TKA were located significantly more posterior than MP-TKA in both medial (10°-100°) and lateral (5°-40°, 55°-100°) compartments (p < 0.0500). MP-TKA had a significantly larger contact area in the medial compartment than in the lateral compartment. In contrast, no significant differences were observed in PS-TKA. The present study revealed no significant differences in clinical outcomes between the MP and PS groups. The PS-TKA demonstrated significantly more posterior translations than MP-TKA at high flexion. The contact points are located more posteriorly in PS-TKA compared with MP-TKA. A larger contact area and medial pivot pattern during high flexion in MP-TKA indicated that MP-TKA provides enhanced medial pivot rotation.
RESUMEN
Background: Osteoarthritis (OA) progression in the lateral compartment is the most common reason for revision after medial unicompartmental knee arthroplasty (UKA). Altered contact kinematics in the lateral compartment may be related to the pathogenesis of OA. Purpose: To quantify the in vivo 6 degrees of freedom (6-DOF) knee kinematics and contact points in the lateral compartment during a single-leg lunge in knees after medial UKA and compare them with the contralateral native knee. Study Design: Descriptive laboratory study. Methods: Included were 13 patients (3 male, 10 female; mean age, 64.7 ± 6.2 years) who had undergone unilateral medial UKA. All patients underwent computed tomography preoperatively and 6 months postoperatively, and bilateral knee posture was tracked using dual fluoroscopic imaging system during a single-leg deep lunge to evaluate the in vivo 6-DOF kinematics. The closest points between the surface models of the femoral condyle and the tibial plateau were determined to locate the lateral compartment contact positions. The Wilcoxon signed-rank test was used to compare knee kinematics and lateral contact position between the UKA and native knees. Spearman correlation was used to test the associations of bilateral 6-DOF range difference and lateral compartment contact excursion difference with bilateral limb alignment difference and functional scores. Results: Compared with native knees, UKA knees had an increased anterior femoral translation of 2.0 ± 0.3 mm during the entire lunge (P < .05). The lateral contact position in UKA knees was located 2.0 ± 0.9 mm posteriorly and with 3.3 ± 4.0 mm less range of contact excursion than native knees (P < .05). Decreased range of lateral compartment contact excursion in the anterior-posterior direction was significantly associated with increased hip-knee-ankle angle in the UKA side (P < .05). Conclusion: The current study revealed altered knee 6-DOF kinematics and the reduced contact excursion range during single-leg lunge after unilateral medial UKA. Clinical Relevance: The altered contact kinematics and reduced range of contact excursion in UKA knees could lead to excessive cumulative articular surface contact stress, which is implicated in the pathogenesis of OA.
RESUMEN
PURPOSE: The objectives of the present study were to investigate the length change in different bundles of the superficial medial collateral ligament (sMCL) and lateral collateral ligament (LCL) during lunge, and to evaluate their association with Knee Society Score (KSS) following medial-pivot total knee arthroplasty (MP-TKA). METHODS: Patients with unilateral MP-TKA knees performed a bilateral single-leg lunge under dual fluoroscopy surveillance to determine the in-vivo six degrees-of-freedom knee kinematics. The contralateral non-operated knees were used as the control group. The attachment sites of the sMCL and LCL were marked to calculate the 3D wrapping length. The sMCL and LCL were divided into anterior, intermediate, and posterior portions (aMCL, iMCL, pMCL, aLCL, iLCL, pLCL). Correlations between lengths/elongation rate of ligament bundles from full extension to 100° flexion and the KSS were examined. RESULTS: The sMCL and LCL demonstrated relative stability in length at low flexion, but sMCL length decreased whereas LCL increased with further flexion on operated knees. The sMCL length increased at low flexion and remained stable with further flexion, while the LCL length decreased with flexion on the contralateral non-operated knees. The lengths of aMCL, iMCL, and pMCL showed moderate (0.5 < r < 0.7, p < 0.05) negative correlations with the KSS, and the lengths of aLCL, iLCL, and pLCL were positively correlated with the KSS at mid flexion on operated knees (p < 0.05). The elongation rates of aLCL, iLCL, and pLCL were negatively correlated with the KSS at high flexion on operated knees (p < 0.05). However, no significant correlations between the length of different bundles of sMCL or LCL with KSS were found on contralateral non-operated knees. CONCLUSIONS: The elongation pattern of sMCL/LCL on MP-TKA knees showed differences with contralateral non-operated knees. The sMCL is tense at low to middle flexion and relaxed at high flexion, while LCL is relaxed at low to middle flexion and tense at high flexion following MP-TKA. Medial stability and proper lateral flexibility during mid flexion were associated with favorable postoperative outcomes in MP-TKA patients. In contrast, lateral relaxation at deep flexion should be avoided when applying soft-tissue balancing in MP-TKA. LEVEL OF EVIDENCE: Level III.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Ligamentos Colaterales , Humanos , Ligamentos Colaterales/cirugía , Articulación de la Rodilla/cirugía , Rango del Movimiento Articular , Fenómenos BiomecánicosRESUMEN
Background: The complexity of the spatial dynamic flexion axis (DFA) of the elbow joint makes the elbow prosthesis design and humeral component alignment challenging. This study aimed to 1) investigate the variations of the spatial DFA during elbow flexion and 2) investigate the relationship between the distal humeral trochlear geometry and the in vivo spatial variation of the DFA. Methods: Ten healthy subjects participated in this study. Each subject performed a full elbow extension to maximum flexion with hand supination under dual fluoroscopic imaging system (DFIS) surveillance. The 2D fluoroscopic images and the 3D bone models were registered to analyze the in vivo elbow kinematics and DFAs. The spatial DFA positions were defined as inclination with the medial and lateral epicondyle axes (MLA) in the transverse and coronal planes. The range of the DFA positions was also investigated during different flexion phases. The Spearman correlation method was used to analyze the relationship between the distal humeral trochlear's morphological parameters and the position of DFAs during different flexion phases. Results: The pathway of the DFAs showed an irregular pattern and presented individual features. The medial trochlear depth (MTD) (r = 0.68, p = 0.03) was positively correlated with the range of the DFA position (2.8° ± 1.9°) in the coronal plane from full extension to 30° of flexion. Lateral trochlear height (LTH) (r = -0.64, p = 0.04) was negatively correlated with the DFA position (-1.4° ± 3.3°) in the transverse plane from 30° to 60° of flexion. A significant correlation was found between LTH with the DFA position in the coronal (r = -0.77, p = 0.01) and transverse planes (r = -0.76, p = 0.01) from 60° to 90° of flexion. Conclusion: This study showed that the pathway of the dynamic flexion axis has an individual pattern. The medial and lateral trochlear sizes were the key parameters that might affect the elbow joint flexion function. When recovering complex distal humeral fractures or considering the implant design of total elbow arthroplasty, surgeons should pay more attention to the medial and lateral trochlea's geometry, which may help restore normal elbow kinematics.
RESUMEN
Background: Total hip arthroplasty (THA) for hip dysplasia patients is sometimes complex and compromises pathomorphological changes in these patients. However, it remains unclear whether it is preoperative deformities or postoperative structures or anatomic changes during THA that have the most remarkable correlation with the hip dynamic function during gait. The purpose of this study was to investigate this relationship and propose insights into the surgical reconstruction strategy in patients with developmental dysplasia of the hip. Methods: A total of 21 unilateral hip dysplasia patients received computed tomography scans for the creation of 3D hip models before surgery and at the last follow-up. Acetabular and femoral orientations, hip center positions, and femoral length were measured before and after THA. Hip kinematics of the operated side during gait was quantified using a dual fluoroscopic imaging technique. Pearson correlation and multiple linear regression were performed to evaluate the relationship between hip maximum range of motion in six directions and demographics characters and above hip anatomic parameters before and after THA and their changes in surgery. Results: Pearson correlation analysis found significant correlations with the gait range of motion mainly in postoperative structures, including postoperative hip center positions and acetabulum and combined anteversion. Further multiple linear regression indicated that a laterally placed hip center was significantly correlated with an increased internal rotation (R 2 = 0.25, p = 0.021), which together with increased postoperative acetabulum anteversion explained 45% of external rotation decreasing (p = 0.004). A proximally placed hip center was correlated with more extension (R 2 = 0.30, p = 0.010). No significant demographic characters or preoperative deformities or surgical changes were included into other multiple regression models. Conclusion: Strong correlations between postoperative structures, especially hip center positions and gait range of motion in unilateral hip dysplasia patients after THA were found. It indicated that postoperative prosthesis structures, particularly hip center positions had significant impact on the hip gait motion range and should be treated with particular caution in surgery.
RESUMEN
Background The medial-pivot (MP) prosthesis was developed to produce more physiological postoperative knee kinematics and better patient satisfaction than traditional prostheses, but outcomes are inconsistent in different studies of Caucasian patients. This study aimed to investigate the postoperative patient satisfaction and in vivo knee kinematics of the MP and posterior-stabilized (PS) prosthesis during gait activity in Chinese patients. Methods A retrospective analysis of 12 patients was received for this study in each MP group and PS group. Patient-reported satisfaction level and Forgotten Joint Score (FJS) were evaluated with questionnaires. A dual fluoroscopic imaging system was used to investigate in vivo knee kinematics of MP and PS total knee arthroplasty (TKA) during treadmill walking at a speed of 0.4 m/s. Results Comparable promising patient satisfaction and overall FJS (MP 60.7 ± 15.35 vs. PS 51.3 ± 17.62, p = 0.174) were found between the MP and PS groups. Peak flexion appeared at around 70% of gait cycle with values of 52.4 ± 7.4° for MP and 50.1 ± 3.6° for PS groups (no difference). Both groups maintained a stable position at the stance phase and began to translated anteriorly at toe-off with an amount of 4.5 ± 2.3 mm in the MP and 6.6 ± 2.7 mm in the PS (p = 0.08) group until late swing. The range of this external rotation motion was 5.9 ± 4.8 and 6.2 ± 4.1° (p = 0.79) for the MP and PS, respectively. Conclusion A similar knee kinematics pattern characterized by a loss of early-stance knee flexion and femoral rollback during walking was observed in the MP and PS TKAs. Our study confirmed similar effectiveness of MP TKA compared to PS TKA in Chinese patients, while the change of knee kinematics of both implants during slow walking should be noted.
RESUMEN
BACKGROUND: While in vitro wear simulation of unicompartmental knee arthroplasty (UKA) showed outstanding long-term wear performance, studies reported that polyethylene (PE) wear was responsible for 12% fixed-bearing (FB) UKA failure. This paper aimed to quantify the in vivo 6-degrees-of-freedom (6-DOF) knee kinematics and contact positions of FB UKA during daily activities and compare with the previous results of in vitro wear simulator. METHODS: Fourteen patients following unilateral medial FB UKA received a CT scan and dual fluoroscopic imaging during level walking, single-leg deep lunge, and sit-to-stand motion for evaluating in vivo 6-DOF FB UKA kinematics. The closest point between surface models of the femoral condyle and PE insert was determined to locate the medial compartmental articular contact positions, which were normalized relative to the PE insert length. The in vivo contact area was compared with the in vitro wear region in previous simulator studies. RESULTS: The in vivo contact positions during daily activities were more anterior than those in the previous in vitro wear simulator studies (p < 0.001). Significant differences in the femoral anteroposterior translation and tibial internal rotation during the stance phase were observed and compared with those in lunge and sit-to-stand motions (p < 0.05). The in vivo contact position located anteriorly and medially by 5.2 ± 2.7 and 1.8 ± 1.6 mm on average for the stance phase, 1.0 ± 2.4 and 0.9 ± 1.5 mm for the lunge, and 2.1 ± 3.3 and 1.4 ± 1.4 mm for sit-to-stand motion. The in vivo contact position was in the more anterior part during the stance phase (p < 0.05). CONCLUSION: The current study revealed that the contact position of FB UKA was located anteriorly and medially on the PE insert during in vivo weight-bearing activities and different from previous findings of the in vitro wear simulator. We should take in vivo 6-DOF knee kinematics and contact patterns of FB UKA into account to reproduce realistic wear performance for in vitro wear simulator and to improve implant design.
RESUMEN
BACKGROUND: Anterior cruciate ligament (ACL) rupture is often accompanied by an injury to the anterolateral ligament (ALL) of the knee. Detailed knowledge of the ALL attachments in ACL-ruptured patients is essential for an anatomical ALL reconstruction to avoid knee over-constraint and successfully treat the residual rotational instability. The aim of the present study was to investigate the three-dimensional (3D), topographic anatomy of the ALL attachment in both ACL-ruptured and ACL-intact patients using 3 Tesla magnetic resonance imaging (3T MRI). METHODS: In the present, retrospective case-control study, the magnetic resonance images of 90 knees with an ACL-rupture and 90 matched-controlled subjects, who suffered a non-contact knee injury without an ACL-rupture, were used to create 3D models of the knee. The femoral and tibial ALL footprints were outlined on each model, and their position was measured using an anatomical coordinate system. RESULTS: The femoral origin of the ALL was located 4.9 ± 2.8 mm posterior and 3.8 ± 2.4 mm proximal to the lateral epicondyle in a non-isometric location in control subjects. In ACL-ruptured patients, it was located in a more posterior and distal, at 6.0 ± 1.9 mm posterior and 2.4 ± 1.7 mm proximal to the lateral epicondyle (p < 0.01), also in a non-isometric location. No difference was found in the tibial ALL insertion between groups. CONCLUSION: The femoral ALL origin was significantly different in ACL-ruptured patients compared to ACL-intact patients. The recommended femoral tunnel position for the anatomical ALL reconstruction, does not represent the femoral ALL origin in the ACL-ruptured knee.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior/diagnóstico por imagen , Articulación de la Rodilla/diagnóstico por imagen , Ligamentos Articulares/diagnóstico por imagen , Imagen por Resonancia Magnética , Adolescente , Adulto , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior , Estudios de Casos y Controles , Femenino , Humanos , Imagenología Tridimensional , Masculino , Estudios Retrospectivos , Adulto JovenRESUMEN
PURPOSE: The aims of the present study were (1) to investigate the tibial footprint location of the anterior cruciate ligament (ACL) in both ACL-ruptured and ACL-intact patients, (2) to identify the relationship of the tibial footprint to the anterior root of the lateral meniscus (ARLM) and medial tibial spine (MTS), and (3) to evaluate the reliability of the ARLM and MTS for identifying the center of the tibial ACL footprint. METHODS: Magnetic resonance images of 90 knees with ACL rupture and 90 matched-controlled knees were used to create three-dimensional models of the tibia. The tibial ACL footprint was outlined on each model, and its location was measured using an anatomical coordinate system. RESULTS: No significant difference in the location of the tibial footprint was found between ACL-ruptured and ACL-intact knees. The tibial ACL footprint was located in very close proximity to the ARLM, especially in the M/L direction. The safe zone of tibial tunnel reaming for avoiding damage to the ARLM was 2.6 mm lateral to the center of the native tibial footprint. Both the ARLM and MTS were reliable intraoperative landmarks for identifying the tibial footprint. CONCLUSIONS: Orthopedic surgeons should be aware of the safe zone of tibial tunnel reaming for avoiding injury to the ARLM. Both the ARLM and MTS might be reliable landmarks for identifying the center of the tibial ACL footprint and may facilitate tibial tunnel placement during anatomical single-bundle ACL reconstruction, especially in cases of revision where the tibial ACL stump is not available. LEVEL OF EVIDENCE: Level III.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior/diagnóstico por imagen , Ligamento Cruzado Anterior/diagnóstico por imagen , Meniscos Tibiales/diagnóstico por imagen , Tibia/diagnóstico por imagen , Adolescente , Adulto , Ligamento Cruzado Anterior/cirugía , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior/métodos , Femenino , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Imagen por Resonancia Magnética/métodos , Masculino , Meniscos Tibiales/cirugía , Persona de Mediana Edad , Cirujanos Ortopédicos , Reproducibilidad de los Resultados , Estudios Retrospectivos , Tibia/cirugía , Adulto JovenRESUMEN
PURPOSE: The present study aimed to investigate the three-dimensional topographic anatomy of the anterior cruciate ligament (ACL) bundle attachment in both ACL-rupture and ACL-intact patients who suffered a noncontact knee injury and identify potential differences. METHODS: Magnetic resonance images of 90 ACL-rupture knees and 90 matched ACL-intact knees, who suffered a noncontact knee injury, were used to create 3D ACL insertion models. RESULTS: In the ACL-rupture knees, the femoral origin of the anteromedial (AM) bundle was 24.5 ± 9.0% posterior and 45.5 ± 10.5% proximal to the flexion-extension axis (FEA), whereas the posterolateral (PL) bundle origin was 35.5 ± 12.5% posterior and 22.4 ± 10.3% distal to the FEA. In ACL-rupture knees, the tibial insertion of the AM-bundle was 34.3 ± 4.6% of the tibial plateau depth and 50.7 ± 3.5% of the tibial plateau width, whereas the PL-bundle insertion was 47.5 ± 4.1% of the tibial plateau depth and 56.9 ± 3.4% of the tibial plateau width. In ACL-intact knees, the origin of the AM-bundle was 17.5 ± 9.1% posterior (p < 0.01) and 42.3 ± 10.5% proximal (n.s.) to the FEA, whereas the PL-bundle origin was 32.1 ± 11.1% posterior (n.s.) and 16.3 ± 9.4% distal (p < 0.01) to the FEA. In ACL-intact knees, the insertion of the AM-bundle was 34.4 ± 6.6% of the tibial plateau depth (n.s.) and 48.1 ± 4.6% of the tibial plateau width (n.s.), whereas the PL-bundle insertion was 42.7 ± 5.4% of the tibial plateau depth (p < 0.01) and 57.1 ± 4.8% of the tibial plateau width (n.s.). CONCLUSION: The current study revealed variations in the three-dimensional topographic anatomy of the native ACL between ACL-rupture and ACL-intact knees, which might help surgeons who perform anatomical double-bundle reconstruction surgery. LEVEL OF EVIDENCE: III.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior/diagnóstico por imagen , Ligamento Cruzado Anterior/diagnóstico por imagen , Traumatismos de la Rodilla/diagnóstico por imagen , Adulto , Ligamento Cruzado Anterior/patología , Ligamento Cruzado Anterior/cirugía , Lesiones del Ligamento Cruzado Anterior/patología , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior/métodos , Femenino , Fémur/diagnóstico por imagen , Fémur/cirugía , Humanos , Imagenología Tridimensional/métodos , Traumatismos de la Rodilla/patología , Traumatismos de la Rodilla/cirugía , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Imagen por Resonancia Magnética/métodos , Masculino , Persona de Mediana Edad , Estudios Retrospectivos , Tibia/diagnóstico por imagen , Tibia/cirugía , Adulto JovenRESUMEN
PURPOSE: The aim of the present study was to investigate the validity and reliability of the deep lateral femoral notch sign (DLFNS) in identifying a concomitant anterior cruciate ligament (ACL)/anterolateral ligament (ALL) rupture and predicting the clinical outcomes following an anatomical single-bundle ACL reconstruction. It was hypothesized that patients with a concomitant ACL/ALL rupture would have an increased DLFNS compared to patients without a concomitant ACL/ALL rupture. METHODS: The lateral preoperative radiographs and MRI images of 100 patients with an ACL rupture and 100 control subjects were evaluated for the presence of a DLFNS and ACL/ALL rupture, respectively. The patients were evaluated clinically preoperatively and at a minimum 1 year following the ACL reconstruction. A receiver operator curve (ROC) analysis was performed to define the optimal cut-off value of the DLFNS for identifying a concomitant ACL/ALL injury. The relative risk (RR) was also calculated to determine whether the presence of the DLFNS was a risk factor for residual instability or ACL graft rupture following an ACL reconstruction. RESULTS: The prevalence of DLFNS was 52% in the ACL-ruptured patients and 15% in the control group. At a minimum 1-year follow-up, 35% (6/17) of the patients with DLFNS > 1.8 mm complained of persistent instability, and an MRI evaluation demonstrated a graft re-rupture rate of 12% (2/17). In patients with a DLFNS < 1.8 mm, 8% (7/83) reported a residual instability, and the graft rupture rate was 2.4% (2/83). A DLFNS > 1.8 mm demonstrated a sensitivity of 89%, a specificity of 95%, a negative predictive value of 98%, and a positive predictive value of 89% in identifying a concomitant ACL/ALL rupture. Patients with a DLFNS > 1.8 mm had 4.2 times increased risk for residual instability and graft rupture compared to patients with a DLFNS ≤ 1.8 mm. CONCLUSIONS: A DLFNS > 1.8 mm could be a clinically relevant diagnostic tool for identifying a concomitant ACL/ALL rupture with high sensitivity and PPV. Patients with a DLFNS > 1.8 mm should be carefully evaluated for clinical and radiological signs of a concomitant ACL/ALL rupture and treated when needed with a combined intra-articular ACL reconstruction and extra-articular tenodesis to avoid a residual rotational instability and ACL graft rupture. LEVEL OF EVIDENCE: III.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior/diagnóstico por imagen , Lesiones del Ligamento Cruzado Anterior/patología , Fémur/diagnóstico por imagen , Fémur/patología , Adolescente , Adulto , Lesiones del Ligamento Cruzado Anterior/cirugía , Reconstrucción del Ligamento Cruzado Anterior , Femenino , Fémur/cirugía , Humanos , Ligamentos/diagnóstico por imagen , Imagen por Resonancia Magnética , Masculino , Radiografía , Reproducibilidad de los Resultados , Estudios Retrospectivos , Rotura/diagnóstico por imagen , Rotura/cirugía , Tenodesis , Adulto JovenRESUMEN
BACKGROUND: Female sex is an independent risk factor for an anterior cruciate ligament (ACL) injury, as the incidence of an ACL rupture is 4- to 6-fold higher in female athletes compared with their male counterparts. The ACL attachment location as a potential risk factor for the increased ACL rupture rate in women has never been reported in the literature. PURPOSE/HYPOTHESIS: The purpose of the present study was to investigate the 3-dimensional topographic anatomy of the ACL bundle attachment in female and male patients, with and without an ACL rupture, and identify potential sex-related differences. We hypothesized that the ACL attachment location would be significantly different between men and women, in both the intact- and ruptured-ACL states. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: Magnetic resonance images of the knee from 90 patients (55 men, 35 women) with a ruptured ACL and 90 matched controls (55 men, 35 women), who suffered a noncontact knee injury without ACL rupture, were used to create 3-dimensional models of the femur and tibia. The ACL bundles' origin and insertion were outlined on each model, and their location was measured using an anatomical coordinate system. A 2-way analysis of variance was used to compare the ACL attachment location between male and female patients, with and without an ACL rupture. RESULTS: No significant differences were found between female and male participants regarding ACL attachment location (femoral origin and tibial insertion). Patients with a ruptured ACL demonstrated a significantly different ACL origin compared with the participants with an intact ACL by an average difference of 8.9% more posterior (P < .05) and 4.0% more proximal (P < .05) in men and 13.0% more posterior (P < .05) and 5.5% more proximal (P < .05) to the flexion-extension axis of the knee in women. CONCLUSION: The ACL attachment location should not be considered a risk factor for the increased ACL rupture rates in female compared with male athletes. However, a more posterior and proximal location of the femoral ACL origin might be a predisposing factor to an ACL rupture regardless of sex.
RESUMEN
BACKGROUND: Although the femoral tunnel position is crucial to anatomic single-bundle anterior cruciate ligament (ACL) reconstruction, the recommendations for the ideal femoral footprint position are mostly based on cadaveric studies with small sample sizes, elderly patients with unknown ACL status, and 2-dimensional techniques. Furthermore, a potential difference in the femoral ACL footprint position and ACL orientation between ACL-ruptured and ACL-intact knees has not been reported in the literature. HYPOTHESIS: The femoral ACL footprint position and ACL orientation vary significantly between ACL-ruptured and matched control ACL-intact knees. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: Magnetic resonance images of the knees of 90 patients with an ACL rupture and 90 matched control participants who had a noncontact knee injury without an ACL rupture were used to create 3-dimensional models of the femur and tibia. The ACL footprints were outlined on each model, and their positions (normalized to the lateral condyle width) as well as ACL orientations were measured with an anatomic coordinate system. RESULTS: The femoral ACL footprint in patients with an ACL rupture was located at 36.6% posterior and 11.2% distal to the flexion-extension axis (FEA). The ACL orientation was 46.9° in the sagittal plane, 70.3° in the coronal plane, and 20.8° in the transverse plane. The ACL-ruptured group demonstrated a femoral ACL footprint position that was 11.0% more posterior and 7.7% more proximal than that of the control group (all P < .01). The same patients also exhibited 5.7° lower sagittal elevation, 3.1° higher coronal plane elevation, and 7.9° lower transverse plane deviation (all P < .01). The optimal cutoff value of the femoral ACL footprint position to prevent an ACL rupture was at 30% posterior and 12% distal to the FEA. CONCLUSION: The ACL femoral footprint position might be a predisposing factor to an ACL rupture. Patients with a >30% posterior and <12% distal position of the femoral ACL footprint from the FEA might have a 51.2-times increased risk of an ACL rupture.