Topical formulation containing chitosan-chamomile microparticles in cutaneous wound healing in rats.

Objective: The aim of this research was to evaluate the efficacy of a topical formulation containing chitosan-chamomile microparticles in cutaneous healing in rats. Method: Male Wistar rats (n=57) were randomly distributed into three groups: treatment; vehicle; and control. Evaluations were performed on days 2, 7 and 14 after the surgical procedure using skin lesion photography, and histological and biochemical analyses. Results: The results showed that there was no difference in the healing index and in the histological analysis of the inflammatory infiltrate among groups. Fibrogenesis was more significant in the group treated with the test formulation at day 7, and angiogenesis was greater in the vehicle and chamomile groups at day 2. The quantification of hydroxyproline showed a higher amount of collagen in the group treated with chamomile, mainly at day 14, although the histological quantification of collagen showed no difference between the groups. Conclusion: From the results of this study, it can be concluded that the formulation, although it had no effect on the healing time, improved the quality of the cicatricial tissue formed with a greater quantity of fibroblasts and collagen.

Photoprotective effect of solid lipid nanoparticles of rutin against UVB radiation damage on skin biopsies and tissue-engineered skin.

Solid lipid nanoparticles (SLNs) containing rutin were prepared to enhance their photochemopreventive effect on the skin. SLNs were produced by the hot melt microemulsion technique. Two 3D skin models: ex vivo skin explants and 3D tissue engineering skin were used to evaluate the photochemopreventive effect of topical formulations containing rutin SLNs, against ultraviolet B (UVB) radiation, inducing sunburn cells, caspase-3, cyclobutane pyrimidine dimers, lipid peroxidation, and metalloproteinase formation. The rutin SLNs presented average size of 74.22 ± 2.77 nm, polydispersion index of 0.16 ± 0.04, encapsulation efficiency of 98.90 ± 0.25%, and zeta potential of -53.0 ± 1.61 mV. The rutin SLNs were able to efficiently protect against UVB induced in the analysed parameters in both skin models. Furthermore, the rutin SLNs inhibited lipid peroxidation and metalloproteinase formation. These results support the use of rutin SLNs as skin photochemopreventive agents for topical application to the skin.

Spray-dried bacterial cellulose nanofibers: A new generation of pharmaceutical excipient intended for intestinal drug delivery.

Defibrillation of bacterial cellulose by ultra-refining was efficient to release nanofibers (BCNF) which were spray dried with the matrices formers mannitol (MN), maltodextrin or hydroxypropylmethylcellulose. The best microsystem comprised the association of BCNF and MN, so the selected microparticles were loaded with diclofenac sodium or caffeine. Depending on the proportion of BCNF, the nanofibers collapse promoted by spray drying can occur onto surface or into microparticles core, leading to different release behaviors. Samples showed pH-dependent drug release, so the microsystem developed with the lowest BCNF concentration showed important trend to gastroresistance. Caffeine was spray dried as a free drug and for this reason it was devoid of any control over release rates. The set of results showed BCNF can be considered an interesting and potential pharmaceutical excipient for lipophilic drugs. Beyond that, BCNF association with MN can lead to novel enteric drug delivery systems based on natural polymers.

Fluidized Bed Hot-Melt Granulation as a Tool to Improve Curcuminoid Solubility.

Curcumin is the main bioactive component of Curcuma longa L. and has recently aroused growing interest from the scientific community. Unfortunately, the medicinal properties attributed to curcuminoids are impaired by their low oral bioavailability or low solubility in aqueous solutions. Many strategies have been studied to improve curcumin solubility; however, the preparation of granules using hydrophilic materials has never been attempted. The aim of this work was to develop curcumin granules by fluidized bed hot-melt granulation using the hydrophilic carrier Gelucire® 50:13. A two-level factorial design was used to verify the influence of Gelucire® 50:13 and lactose contents found in the granules on their size, morphology, bulk and tapped densities, flow, moisture content, and water activity. The granules obtained were also evaluated by differential scanning calorimetry, thermogravimetric analysis, X-ray powder diffraction, and infrared spectrometry. The curcumin solubility and dissolution rates in water were determined by liquid chromatography. The best formulation provides an increase of curcumin solubility of 4642-fold and 3.8-fold compared to the physical mixture. The dissolution tests showed a maximum drug release from granules after 45 min of 70% at pH 1.2 and 80% at pH 5.8 and 7.4, while for non-granulated curcumin, the release was below 20% in all pH. The solid-state characterization and solubility measurement showed good stability of granules over 9 months. The results attest that the fluidized bed hot-melt granulation with hydrophilic binders is an attractive and promising alternative to obtain solid forms of curcumin with enhanced bioavailability.

Box-Behnken analysis and storage of spray-dried collagenolytic proteases from Myceliophthora thermophila submerged bioprocess.

Enzymes do not have long-term storage stability in soluble forms, thus drying methods could minimize the loss of enzymatic activity, the spray dryer removes water under high temperatures and little time. The aims of this study were to improve the stability of enzymatic extract from Myceliophthora thermophila for potential applications in industry and to evaluate the best conditions to remove the water by spray drying technique. The parameters were tested according to Box-Behnken and evaluated by analysis of variance (ANOVA), all the parameters measured were found to influence the final enzyme activity and spray drying process yield ranged from 38.65 to 63.75%. Enzyme powders showed increased storage stability than extract and maintained about 100% of collagenolytic activity after 180 days of storage at 30°C. The results showed that the microbial enzymes maintained activity during the spray drying process and were stable during long-term storage; these are promising characteristics for industrial applications.

Topical Formulation Containing Beeswax-Based Nanoparticles Improved In Vivo Skin Barrier Function.

Lipid nanoparticles have shown many advantages for treatment/prevention of skin disorders with damaged skin barrier function. Beeswax is a favorable candidate for the development of nanosystems in the cosmetic and dermatological fields because of its advantages for the development of products for topical application. In the present study, beeswax-based nanoparticles (BNs) were prepared using the hot melt microemulsion technique and incorporated to a gel-cream formulation. The formulation was subsequently evaluated for its rheological stability and effect on stratum corneum water content (SCWC) and transepidermal water loss (TEWL) using in vivo biophysical techniques. BNs resulted in mean particle size of 95.72 ± 9.63 nm and zeta potential of -9.85 ± 0.57 mV. BN-loaded formulation showed shear thinning behavior, well adjusted by the Herschel-Bulkley model, and a small thixotropy index that were stable for 28 days at different temperatures. BN-loaded formulation was also able to simultaneously decrease the TEWL and increase the SCWC values 28 days after treatment. In conclusion, the novel beeswax-based nanoparticles showed potential for barrier recovery and open the perspective for its commercial use as a novel natural active as yet unexplored in the field of dermatology and cosmetics for treatment of skin diseases with damaged skin barrier function.

Curcumin suppresses inflammatory cytokines and heat shock protein 70 release and improves metabolic parameters during experimental sepsis.

CONTEXT: Curcumin has been reported to have anti-inflammatory, antioxidant and hypoglycaemic properties, besides reducing mortality in sepsis. OBJECTIVE: This study evaluates the biological activities of a curcumin dispersion formulated by spray-drying in experimental sepsis. MATERIALS AND METHODS: Male Wistar rats were subjected to sepsis by caecal ligation and puncture (CLP), controls were sham operated. The animals were treated with curcumin dispersion (100 mg/kg, p.o.) or water for 7 days prior to CLP and at 2 h after surgery. One group was used to analyze curcumin absorption through HPLC; another had the survival rate assessed during 48 h; and from a third group, blood was collected by decapitation to analyze metabolic and inflammatory parameters. RESULTS: The plasma curcumin levels reached 2.5 ng/mL at 4 h, dropped significantly (p < 0.001) at 6 h (1.2 ng/mL), and were undetectable at 24 h in both groups. Curcumin temporarily increased the survival rate of the septic rats by 20%. Moreover, it attenuated glycaemia (p < 0.05) and volemia (p < 0.05) alterations typically observed during sepsis, and decreased the levels of the proinflammatory cytokines IL-1ß and IL-6 in plasma (p < 0.001) and peritoneal lavage fluid (p < 0.05) of septic rats. Serum HSP70 levels were decreased (p < 0.01) at 24 h after CLP. DISCUSSION AND CONCLUSION: Our results show that the curcumin dispersion dose employed was not detrimental to the septic rats. In fact, it temporarily increased their survival rate, improved important metabolic parameters, reduced proinflammatory cytokines and HSP70 production.

Ultrasound influence on the solubility of solid dispersions prepared for a poorly soluble drug.

Solid dispersions have been successfully used to enhance the solubility of several poorly water soluble drugs. Solid dispersions are produced by melting hydrophilic carriers and mixing in the poorly water soluble drug. Supersaturation is obtained by quickly cooling the mixture until it solidifies, thereby entrapping the drug. The effects of using ultrasound to homogenize the molten carrier and drug mixture were studied. In particular, the increase in drug solubility for the resulting solid dispersions was analyzed. Piroxicam, which has very low water solubility, was used as a model drug. A full factorial design was used to analyze how sonication parameters affected the solubility and in vitro release of the drug. The results show that the use of ultrasound can significantly increase the solubility and dissolution rate of the piroxicam solid dispersion. Pure piroxicam presented a solubility of 13.3 µg/mL. A maximum fourfold increase in solubility, reaching 53.8 µg/mL, was observed for a solid dispersion sonicated at 19 kHz for 10 min and 475 W. The in vitro dissolution rate test showed the sonicated solid dispersion reached a maximum rate of 18%/min, a sixfold increase over the piroxicam rate of 2.9%/min. Further solid state characterization by thermal, X-ray diffraction and Fourier transform infrared analyses also showed that the sonication process, in the described conditions, did not adversely alter the drug or significantly change its polymorphic form. Ultrasound is therefore an interesting technique to homogenize drug/carrier mixtures with the objective of increasing the solubility of drugs with poor water solubility.

Improvement of enalapril maleate chemical stability by high shear melting granulation.

Enalapril maleate is a widely used drug, which is chemically unstable when mixed with excipients resulting in enalaprilat and diketopiperazine as the main degradation products. The preparation of enalapril sodium salt has been used to improve drug stability in solid dosage forms; however, product rejection is observed when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. In this study, granules were prepared by melting granulation using stearic acid or glyceryl monostearate, with a view to developing more stable enalapril maleate solid dosage forms. The granules were prepared in a laboratory-scale high shear mixer and compressed in a rotary machine. Size distribution, flow properties, in vitro drug release and enalapril maleate chemical stability were evaluated and compared with data obtained from tablets prepared without hydrophobic binders. All formulations showed good physical properties and immediate drug release. The greatest improvement in the enalapril maleate stability was observed in formulations containing stearic acid. This study showed that hot melting granulation could be successfully used to prepare enalapril maleate granules which could substitute the in situ formation of enalapril sodium salt, since they provided better enalapril stability in solid dosage forms.

Curcumin reduces cisplatin-induced neurotoxicity in NGF-differentiated PC12 cells.

The potential neuroprotective benefits of curcumin against cisplatin neurotoxicity were investigated. Curcumin is a polyphenol derived from the rhizome of Curcuma longa whose pharmacological effects include antioxidant, anti-inflammatory and anti-cancer properties. Cisplatin is a potent chemotherapeutic drug with activity against a wide variety of tumors, although it has notorious side effects. Cisplatin neurotoxicity is clinically evident in patients that have undergone a full course of chemotherapy and develop a peripheral neuropathy that may affect the treatment regimen and the patient's qualify of life. In this study, we examined whether curcumin can protect against cisplatin neurite outgrowth inhibition in PC12 cells, which is an indicator of the protective potential against neuropathy. We also investigated whether curcumin affects cisplatin effectiveness by analyzing the modulation of p53 gene expression and its effect on cisplatin cytotoxicity in HepG2 tumor cells. Non-cytotoxic concentrations of curcumin reduced in vitro neurotoxicity of cisplatin in PC12 cells. The treatment of PC12 cells with cisplatin (10µg/mL) significantly reduced neurite outgrowth. The tested concentration of curcumin (1.0 and 10µg/mL) did not result in neurite toxicity but nevertheless diminished cisplatin-induced inhibition of neurite outgrowth by up to 50% (p<0.05). Our results indicate that curcumin does not compromise cisplatin's anticancer activity. Curcumin neither suppressed p53 mRNA transcription nor protected tumor cells against cisplatin cytotoxicity. These results indicate that curcumin may reduce cisplatin-induced neurotoxicity, and clinical studies should potentially be considered.

Chitosan microparticles for sustaining the topical delivery of minoxidil sulphate.

Given the hypothesis that microparticles can penetrate the skin barrier along the transfollicular route, this work aimed to obtain and characterise chitosan microparticles loaded with minoxidil sulphate (MXS) and to study their ability to sustain the release of the drug, attempting a further application utilising them in a targeted delivery system for the topical treatment of alopecia. Chitosan microparticles, containing different proportions of MXS/polymer, were prepared by spray drying and were characterised by yield, encapsulation efficiency, size and morphology. Microparticles selected for further studies showed high encapsulation efficiency (∼82%), a mean diameter of 3.0 µm and a spherical morphology without porosities. When suspended in an ethanol/water solution, chitosan microparticles underwent instantaneous swelling, increasing their mean diameter by 90%. Release studies revealed that the chitosan microparticles were able to sustain about three times the release rate of MXS. This feature, combined with suitable size, confers to these microparticles the potential to target and improve topical therapy of alopecia with minoxidil.

Box-Behnken design for the optimization of an enantioselective method for the simultaneous analysis of propranolol and 4-hydroxypropranolol by CE.

An experimental design optimization (Box-Behnken design, BBD) was used to develop a CE method for the simultaneous resolution of propranolol (Prop) and 4-hydroxypropranolol enantiomers and acetaminophen (internal standard). The method was optimized using an uncoated fused silica capillary, carboxymethyl-beta-cyclodextrin (CM-beta-CD) as chiral selector and triethylamine/phosphoric acid buffer in alkaline conditions. A BBD for four factors was selected to observe the effects of buffer electrolyte concentration, pH, CM-beta-CD concentration and voltage on separation responses. Each factor was studied at three levels: high, central and low, and three center points were added. The buffer electrolyte concentration ranged from 25 to 75 mM, the pH ranged from 8 to 9, the CM-beta-CD concentration ranged from 3.5 to 4.5% w/v, and the applied run voltage ranged from 14 to 20 kV. The responses evaluated were resolution and migration time for the last peak. The obtained responses were processed by Minitab to evaluate the significance of the effects and to find the optimum analysis conditions. The best results were obtained using 4% w/v CM-beta-CD in 25 mM triethylamine/H3PO4 buffer at pH 9 as running electrolyte and 17 kV of voltage. Resolution values of 1.98 and 1.95 were obtained for Prop and 4-hydroxypropranolol enantiomers, respectively. The total analysis time was around of 15 min. The BBD showed to be an adequate design for the development of a CE method, resulting in a rapid and efficient optimization of the pH and concentration of the buffer, cyclodextrin concentration and applied voltage.

Enantioselective analysis of oxybutynin and N-desethyloxybutynin with application to an in vitro biotransformation study.

An enantioselective method using liquid-phase microextraction (LPME) followed by HPLC analysis was developed for the determination of oxybutynin (OXY) and its major metabolite N-desethyloxybutynin (DEO) in rat liver microsomal fraction. The LPME procedure was optimized using multifactorial experiments. Under the optimal extraction conditions, the mean recoveries were 61 and 55% for (R)-OXY and (S)-OXY, respectively, and 70 and 76% for (R)-DEO and (S)-DEO, respectively. The validated method was employed to an in vitro biotransformation study using rat liver microsomal fraction. The results demonstrated the enantioselective biotransformation of OXY.