Evaluation of Antimicrobial Properties, Cell Viability, and Metalloproteinase Activity of Bioceramic Endodontic Materials Used in Vital Pulp Therapy.

This study aimed to evaluate the antimicrobial properties, cell viability, and matrix metalloproteinase (MMP) inhibition capacity of several endodontic materials aimed at vital pulp therapy: Pro Root MTA®, EndoSequence®, Biodentine®, MTA Angelus®, TheraCal LC®, and BioC Repair®. The materials were prepared according to the manufacturer's instructions. Antimicrobial tests were conducted using a microcosm biofilm model, cell viability was assessed using murine fibroblasts (L929), and MMP activity was analyzed through electrophoresis. The results showed that BioC Repair®, Biodentine®, and EndoSequence® exhibited similar antimicrobial properties, while MTA Angelus® and ProRoot MTA® had inferior results but were comparable to each other. In terms of cell viability, no significant differences were observed among the materials. EndoSequence® demonstrated the highest MMP inhibition capacity. In conclusion, BioC Repair®, Biodentine®, EndoSequence®, and TheraCal® showed better antimicrobial properties among the tested materials. The materials did not exhibit significant differences in terms of cytotoxicity. However, EndoSequence® displayed superior MMP inhibition capacity.

The effect of prosthetic rehabilitation with or without dietary advice on nutritional status in elderly patients: a systematic review.

BACKGROUND: Elderly people frequently report tooth loss, affecting their nutritional status. There is a gap in the scientific evidence about the influence of prosthodontic rehabilitation on nutritional status. OBJECTIVE: To investigate the influence of prosthodontic rehabilitation combinates or not with dietary advice on nutritional status in elderly patients. METHODS: A systematic literature search was conducted in three electronic databases to identify randomized clinical trials that evaluated the effect of prosthetic rehabilitation on nutritional status in subjects aged 60 years or older, with a follow-up of at least 1 month after prosthesis rehabilitation. RESULTS: Of the 1517 articles identified in the initial search, 12 were selected for the final review. No significant difference between the types of prosthesis were found regarding the chewing by the elderly population. Although patients who received prosthetic treatment had significant improvement in chewing ability, a consistent pattern of improvement in nutritional status was not observed when they did not receive dietary advice. In addition, the association between the condition of the dentition, the masticatory performance and nutritional change of elderly patients has been found. Studies that evaluated simultaneous complete denture treatment and simple dietary advice showed an improvement of nutrient intake in elderly patients. CONCLUSIONS: Isolated prosthetic rehabilitation may not have the effect of exerting a change in nutritional status of edentulous elderly patients. In general, simultaneous dietary consulting and prosthetic treatment in combination may improve dietary habits, since masticatory capacity and efficiency are not the only factors that influence the nutritional status of a patient.

Sleep-related factors and orofacial pain symptoms associated with rhythmic masticatory muscle activity frequency scored by polysomnography recordings: A case-control study.

OBJECTIVE: This study aimed to evaluate the influence of the frequency of rhythmic masticatory muscle activity per hour (RMMA/h) scored by polysomnography (PSG) recordings on sleep-related factors and orofacial pain symptoms. METHODS: According to RMMA/h frequency, participants were assigned either to the control group (i.e., CRMMA, n = 40); or the case group according to high (i.e., HRMMA, n = 12) or low (LRMMA, n = 28) RMMA/h frequency. Fisher's exact (nominal variables), One-way Analysis of Variance followed by post-hoc Tukey (continuous variables) and Poisson Regression tests were used to calculate orofacial pain symptoms and sleep-related breathing, behavior, and architecture differences between controls versus cases at a significance level of 5%. RESULTS: The CRMMA differed from HRMMA and LRMMA subgroups considering orofacial pain, self-reported tooth clenching or grinding, obstructive sleep apnea (OSA), snoring, and most variables considering sleep architecture (P ≤ 0.05). Multivariate adjusted Poisson regression analysis revealed that bruxers, regardless of RMMA/h frequency, presented a significantly higher prevalence rate (PR) related to orofacial pain (PR 1.68; P = 0.025) and self-reported behavior (PR 1.71; P = 0.012). CONCLUSION: Significant differences in N1, N2 and N3 stages, arousals, arousal per hour, and sleep onset latency variables were found comparing bruxer with high or low RMMA/h frequency. Compared to controls, bruxers presented higher PR related to headache and self-reported tooth clenching or grinding.

Invasive surgical procedures for the management of internal derangement of the temporomandibular joint: a systematic review and meta-analysis regarding the effects on pain and jaw mobility.

OBJECTIVES: This systematic review compared minimally and invasive surgical procedures to manage arthrogenous temporomandibular joint (TMJ). MATERIALS AND METHODS: The review included clinical trials assessing surgical procedures of arthrogenous temporomandibular disorder (TMD) management by carrying out comparisons within the same surgical procedure (pre- and post-treatment) as well as between different surgical procedures. Meta-analyses were conducted only for similar comparison reporting the same outcome measures, visual analog scale (VAS) values to evaluate pain and maximum incisal opening (MIO) values. RESULTS: Of the 1,015 studies identified by the search strategy, 26 were selected for full-text reading, and 19 were included in the review. Of these, 16 studies were included in the meta-analysis and 3 in the qualitative analysis. The VAS scores showed significantly lower values after discectomies (p < 0.001) and discoplasties (p < 0.001) in the within-group comparison. Moreover, significantly lower VAS scores and higher MIO values were observed after discectomy compared to arthroscopy, eminectomy, and discoplasty (p < 0.05). CONCLUSION: The findings of this systematic review suggest that although significantly lower VAS scores and higher MIO values were observed after discectomy, the currently available scientific evidence is unclear, and the use of invasive surgical procedures should not be implemented as an efficient first-line treatment option for arthrogenous TMD management. CLINICAL SIGNIFICANCE: VAS and MIO outcomes could be insufficient to describe the success or failure of open surgical procedures like discectomy and discoplasty.

A systematic review and meta-analysis on using preheated resin composites as luting agents for indirect restorations.

OBJECTIVES: This systematic review investigated the hypothesis that preheated resin composites (RCs) used as luting agents improve the mechanical properties, physicochemical performance, and color of indirect ceramic restorations. MATERIALS AND METHODS: Literature search was performed in three databases (Medline/PubMed, Scopus, and Web of Science) and in the grey literature (OpenGrey, ProQuest, and Catalog of Theses & Dissertations from CAPES). Eligibility criteria included only studies comparing at least one preheated RC used as a luting agent with resin cements. RESULTS: Data regarding the mechanical properties, physicochemical characteristics, and color were analyzed qualitatively, and the microtensile bond strength and film thickness were also evaluated by meta-analysis. The search strategy identified 3894 papers, and 28 were full-text screened. Seven studies were included in the review, and 5 were included in the meta-analysis. No significant difference was found for microtensile bond strength (P = 0.14). Preheated RCs showed significantly higher film thickness than resin cements (P = 0.001). CONCLUSION: Overall, the use of preheated RCs as luting agents offers similar to poorer performance than using resin cements for bonding indirect restorations. CLINICAL RELEVANCE: Despite the claim that preheated RC could be used as a luting agent, further studies should investigate the effect of clinically unacceptable film thickness.

Physicomechanical Properties of Tertiary Monoblock in Endodontics: A Systematic Review and Meta-analysis.

Introduction: A systematic review and meta-analysis were conducted to evaluate the physicomechanical properties of tertiary monoblock obturation with different obturation techniques. Methods and Materials: PubMed (MEDLINE), Web of Science, Scopus, the Cochrane Library, LILACS, IBECS, and BBO were searched time. PICO question was: "In extracted human teeth (Population), does tertiary monoblock obturation (Intervention) have superior physicomechanical properties (Outcome) compared to conventional obturation systems (Comparison)?". Statistical analyses for push-out bond strength were performed with RevMan software by comparing the mean differences of each study, with a 95% confidence interval. Inverse variance was used as statistical method, random-effects models as analysis model, and heterogeneity between studies was assessed by Cochran's Q test and I2 statistic (P <0.05). Results: Of 2162 studies retrieved, 31 were included in this review for "Study Characteristics". Ten studies were included in the meta-analysis. Analysis demonstrated that conventional obturation had significantly higher push-out bond strength than tertiary monoblock obturation (P <0 .01), with a mean difference of -1.00 (95% CI, -1.41 to -0.58; I2=100%). Subgroups using single-cone and cold lateral condensation techniques showed significantly lower push-out bond strength for tertiary monoblock obturation (P <0.01), respectively with a mean difference of -0.09 (95% CI, -1.13 to -0.67; I2=97%) and of -1.97 (95% CI, -3.19 to -0.75; I2=100%). The warm vertical compaction subgroup showed no statistically significant difference between tertiary monoblock and conventional systems (P =0.13), with a mean difference of 0.49 (95% CI, -0.14 to 1.12; I2=10%). Conclusion: Tertiary monoblock systems have a push-out bond strength similar to conventional systems when used with warm vertical compaction.

Effect of a Homemade Salivary Substitute Prepared Using Chamomile (Matricaria chamomilla L.) Flower and Flax (Linum usitatissimum L.) Seed to Relieve Primary Burning Mouth Syndrome: A Preliminary Report.

Objectives: To evaluate (1) the effect of a salivary substitute prepared using chamomile (Matricaria chamomilla L.) flower and flax (Linum usitatissimum L.) seed to relieve Primary burning mouth syndrome (BMS) symptoms, (2) their effect on the inhibition of matrix metallopeptidase 2 (MMP2) and MMP9 metalloproteinases, and (3) their potential cellular cytotoxic effect. Subjects: 40 women aging >40 years with diagnosis of primary BMS. Settings/Location: Center of Diagnosis of Diseases of the Mouth, Federal University of Pelotas, Brazil. Design: This was an open clinical trial where primary BMS patients used the homemade salivary. At the first appointment, after 30 and 60 days, the authors evaluated the pattern and intensity of BMS and xerostomia symptoms, and then determined and compared the unstimulated salivary flow rate (SFR), viscosity, and salivary pH. MMP2 and MMP9 activities in saliva and cytotoxicity were assessed using different concentrations of chamomile flower and flax seed separately. Interventions: Subjects used the homemade salivary substitute for 3 months and were instructed to rinse their mouth three to four times daily for 1 min. Outcome measures: A numeric rating scale to evaluate the intensity of burning sensation and xerostomia symptoms, salivary flow rate (SFR) to determine salivary volume, dynamic rheology technique for viscosity and a digital meter for salivary pH. MMP2 and MMP9 activities in saliva and cytotoxicity were assessed by zymography and cell viability assay respectively. Results: After treatment, severity of BMS symptoms decreased, the SFR increased, salivary viscosity decreased, and severity of xerostomia sensation (in patients who reported having this symptom) improved (p < 0.05). Chamomile flower and flax seed had no effect on inhibiting MMP2 and MMP9 activities, and neither showed cellular cytotoxic effects. Conclusion: This homemade salivary substitute is an economical, viable, easily manipulated, noncytotoxic, and a practical alternative to relieve BMS symptoms.

Antimicrobial Therapeutics in Regenerative Endodontics: A Scoping Review.

INTRODUCTION: This review aimed to provide a critical appraisal of alternative antimicrobial strategies in lieu of traditional triple antibiotic paste (TAP). METHODS: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The literature search was performed in 8 databases (PubMed/Medline, Embase, LILACS, Web of Science, Scopus, BVS, SciELO, and the Cochrane Library), selecting clinical, in vitro, in vivo, and in situ studies that evaluated antimicrobial alternatives to TAP in regenerative endodontics. Studies lacking an experimental TAP group were excluded. RESULTS: A total of 1705 potentially relevant records were initially identified. From the 38 studies retrieved for full-text reading, 16 fulfilled all selection criteria and were included in the qualitative analysis. According to the study design, 11 studies were solely in vitro, 1 study was both in vitro and in vivo (animal model), 2 studies were solely animal experiments, and 2 studies were clinical trials. The alternative antimicrobial agents to TAP consisted of modified TAP formulations (eg, a combination of TAP with chitosan); TAP-eluting nanofibers; propolis; chlorhexidine (CHX) gels/solutions; double antibiotic pastes composed of distinct combinations of antibiotics; Ca(OH)2-based formulations; and sodium hypochlorite. Overall, most of the alternative agents performed similarly to TAP, although some strategies (eg, Ca(OH)2- and CHX-based formulations) seemed to present dubious importance in the control of infection. CONCLUSIONS: TAP still remains an excellent option in terms of the complete elimination of microorganisms. This review points to the use of electrospun fibers as a drug delivery system to offer a controlled release of the antimicrobial agent, as well as the use of natural compounds, deserving future investigation.

Bonding Strength of Universal Adhesives to Indirect Substrates: A Meta-Analysis of in Vitro Studies.

PURPOSE: To evaluate the in vitro bond strength of universal adhesive systems to indirect substrates. MATERIAL AND METHODS: Two reviewers performed a literature search up to March 2018 in seven databases: PubMed, Web of Science, SciELO, Scopus, LILACS, IBECS, and BBO. The review included studies that compared the bond strength of universal adhesives and well-established material-specific primers to indirect substrates: lithium disilicate ceramic, yttrium-stabilized zirconium dioxide ceramic, leucite-reinforced ceramic, feldspathic porcelain, polymer infiltrated ceramic material, resin composite or metal alloys. Analyses were carried out using RevMan 5.3.5. A global comparison was performed with the standardized mean difference using a random-effects models at a significance level of p < 0.05. RESULTS: A total of 45 studies were included in the qualitative analysis, and the meta-analysis was performed with 42 studies. Bond strength to glass-based ceramics and alloys was improved with the use of a specific-primer as separate step before the bonding procedures (lithium disilicate, p < 0.001; alloys, p < 0.001). The bond strength to zirconium substrates was improved with the use of universal adhesives (p < 0.001). For bond strength to composite resin as indirect substrate, universal adhesives performed in a manner similar to that of the material-specific primer (p = 0.11). CONCLUSIONS: The clinical procedure of luting zirconia and resin composite restorations could be simplified by using single-bottle universal adhesives. However, the ability of universal adhesives to achieve an adequate and durable bond to glass-based ceramics and alloys appears to be limited.

Efficacy of natural, peroxide-free tooth-bleaching agents: A systematic review, meta-analysis, and technological prospecting.

The aim of this study is to analyze the efficacy of natural bleaching agents and the current technological development in this research field. Two reviewers performed a literature search up to July 2019 in 15 databases. Five laboratory studies and 25 patents were included. Data regarding natural bleaching agent used, application protocol, and the main findings of studies were analyzed. Laboratory studies that evaluated natural bleaching agents' peroxide-free or associated to peroxides and patents related to natural bleaching agents were included. The studies evaluated papain, bromelain, chlorine dioxide, sodium chloride plus vinegar and sodium bicarbonate as peroxide-free agents; and sweet potato extract, lactoperoxidase, and peroxidase associated to peroxide used were included. Twenty-five patents were included; among the most cited are the papain and the chlorine. The addition of non-peroxide agents into peroxide showed improvement in bleaching effect with the incorporation of these non-peroxide agents (p < .05). On the other hand, peroxide-free agents did not show an improvement in bleaching effect (p < .05). The evidence in literature suggested that natural bleaching agents incorporated to peroxide may improve the bleaching. Therefore, the current literature does not support the use of natural agents as dental bleaching.

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of composition strategies.

PURPOSE: A systematic review was conducted to determine whether there were composition strategies available to reduce and control polymerization shrinkage stress development in resin-based restorative dental materials. DATA SOURCES: This report was reported in accordance with the PRISMA Statement. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO. STUDY SELECTION: Only laboratory studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis, or theoretical and mathematical models were excluded. Of the 6113 eligible articles, 62 studies were included in the qualitative analysis, and the meta-analysis was performed with 58 studies. The composition strategy was subdivided according to the modified part of the material: filler phase, coupling agent, or resin matrix. A global comparison was performed with random-effects models (α = 0.05). The only subgroup that did not show a statistical difference between the alternative strategy and the control was 'the use of alternative photo-initiators' (p = 0.29). CONCLUSION: Modification of the resin matrix made the largest contribution to minimizing stress development. The technology used for decreasing stress in the formulation of low-shrinkage and bulk-fill materials was shown to be a promising application for reducing and controlling stress development.

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of technique protocol and photo-activation strategies.

PURPOSE: A systematic review was conducted to determine whether there were any alternative technique or additional step strategies available to reduce and control polymerization shrinkage stress development in dental resin-based restorative materials. DATA SOURCES: This report followed the PRISMA Statement. A total of 36 studies were included in this review. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO. STUDY SELECTION: Only in vitro studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis or mathematical models were excluded. Of the 6.113 eligible articles, 36 studies were included in the qualitative analysis, and the meta-analysis was performed with 25 studies. A global comparison was performed with random-effects models (α = 0.05). The strategies were subdivided as follows: the use of an alternative technique protocol of placing the material inside the tooth cavity; the modification of the irradiation intensity or total energy delivered to the material; the use of an alternative light-curing source; or the use of an alternative photo-activation mode. All alternative strategies showed statistically significant differences when compared with their respective controls (p < 0.05). CONCLUSION: The use of alternative light-curing sources contributed more to minimizing stress development than placing the material by means of an alternative technique protocol or by modifying the irradiant intensity or total energy delivered to the material during photo-activation. Moreover, the use of an alternative photo-activation mode (intermittent light, exponential, soft-start or pulse delay modes) was shown to be an effective strategy for reducing and controlling stress development in resin-based dental materials.

New adhesive system based in metals cross-linking methacrylate.

This study evaluated the anti-antibiofilm potential of silver methacrylate (Ag) or di-n-butyldimethacrylatetin (Sn) in experimental adhesive systems. Ag and Sn methacrylates were incorporated at 0.5mol%, 1mol% and 2mol% in an adhesive resin. The anti-antibiofilm potential, degree of conversion (DC), microtensile bond strength (µTBS), water sorption/solubility (WSR/SL), bonded interfaces pattern (SEM), cytotoxicity and leaching of Ag and Sn ions were evaluated. Data were statistically analyzed considering α = 0.05. Only Ag at 2% affected DC and µTBS. Ag at 1% and 2% and Sn at 1% and 2% showed anti-biofilm potential against Mutans streptococci. Ag at 1% and 2% and Sn at 2% showed a statistically significant difference to the control in WSR/SL (p < 0.05). The additions of metal methacrylate did not affect cell viability, being the adhesive resins statistically similar to controls. Leached metals of Ag were more than 100x higher than for Sn. Between the concentration tested, Ag and Sn methacrylate at 1% presented an anti-biofilm effect without altering the mechanical properties evaluated.

Monitoramento tecnológico dos agentes dessensibilizantes dentinários / Technological monitoring of dentin desensitizing agents

O uso estratégico das informações científicas e tecno-lógicas referentes aos dessensibilizantes dentinários pode possibilitar oportunidades de projetos científico--tecnológicos em consonância com políticas públicas de estímulo à inovação. Objetivo: Realizar um moni-toramento tecnológico na área de dessensibilizantes a fim de obter um panorama que possibilite analisar o contexto atual e obter oportunidades para prospec-ção tecnológica. Materiais e método: Foi realizada uma busca sistemática nas bases de dados de patentes americana (USPTO), japonesa (JPO), brasileira (INPI) e europeia (EPO). Adicionalmente, o sistema Questel Orbit foi utilizado como fonte de consulta. A informa-ção científica foi obtida das bases de dados PubMed, Scopus, Web of Science e Scielo. Foram selecionados artigos e documentos patentários referente a dessensi-bilizantes do período entre janeiro de 1965 e outubro de 2013. Para montagem e revisão do banco de dados, os softwares Questel Orbit e Microsoft Office Excel 2010 foram utilizados. Resultados: 261 patentes e 728 artigos satisfizeram os critérios de inclusão. Os Estados Unidos detêm 51% da prioridade de patentes, seguido pelo Japão com 20%. Além disso, os principais autores dos artigos não estão prospectando nessa tecnologia, uma vez que não houve relação entre eles e os prin-cipais inventores das patentes. Conclusões: Foi possí-vel obter um panorama do setor de dessensibilizantes, o qual demonstra uma baixa apropriação tecnológica brasileira nessa indústria odontológica. A consolidação de políticas públicas de estímulos a projetos entre insti-tuições científicas e tecnológicas, em áreas de fronteira de conhecimento ainda pouco exploradas, são alterna-tivas estratégicas para uma presença efetiva da indústria brasileira nesse setor de mercado.