Antibacterial and preventive effects of newly developed modified nano-chitosan/glass-ionomer restoration on simulated initial enamel caries lesions: An in vitro study.

BACKGROUND: Despite the superiority of glass-ionomer cements (GICs) over composites in treating white spot lesions (WSLs), there is still a concern about their preventive and antibacterial properties. Efforts have been made to improve the strength of their bond to demineralized enamel, fluoride release and antibacterial properties by adding nanoparticles of chitosan, which seems to be a promising method. OBJECTIVES: The aim of the present study was to assess the antibacterial effect, the microshear bond strength (µSBS) to enamel at the WSL area, and the fluoride and nano-chitosan release after modifying the polyacrylic acid liquid phase of a traditional GIC with different nano-chitosan volumes. MATERIAL AND METHODS: A total of 120 samples were prepared, and then divided into 4 groups (n = 30): G1 - non-modified GIC, which served as a control group, while G2, G3 and G4 were modified with different nano-chitosan volumes (50%, 100% and 150%, respectively). Microshear bond strength was assessed using a universal testing machine (UTM) after storage in distilled water for 24 h. Fluoride and nanochitosan release was measured with the use of spectrophotometers at different time points (initially, and at 1 h, 24 h, 48 h, 72 h, 1 week, 2 weeks, 3 weeks, and 6 weeks) after storage in distilled water. The antibacterial effect against the Streptococcus aureus strain was assessed with the agar diffusion test. The data was statistically analyzed. RESULTS: After 24-hour storage, G2 recorded a slight, yet non-significant, increase in the µSBS values (4.1 ±0.94 MPa) as compared to G1 (3.9 ±1.30 MPa). With regard to fluoride release, the amount recorded for G1 was significantly greater at the end of the 24-hour storage period (0.70 ±0.30 µmf/cm2) than modified nano-chitosan GIC groups; G1 was followed by G4 (0.54 ±0.34 µmf/cm2). The highest amount of nano-chitosan release after 24-hour storage was noted for G3 (0.85 ±0.00 µmf/cm2). The highest inhibition zone value was recorded for G2. CONCLUSIONS: Glass-ionomer cement modified with 50% nano-chitosan was shown to positively affect µSBS and the antibacterial effect, while modification with 150% nano-chitosan significantly increased fluoride release.

Anti-Infection of Oral Microorganisms from Herbal Medicine of Piper crocatum Ruiz & Pav.

The WHO Global Status Report on Oral Health 2022 reveals that oral diseases caused by infection with oral pathogenic microorganisms affect nearly 3.5 billion people worldwide. Oral health problems are caused by the presence of S. mutans, S. sanguinis, E. faecalis and C. albicans in the oral cavity. Synthetic anti-infective drugs have been widely used to treat oral infections, but have been reported to cause side effects and resistance. Various strategies have been implemented to overcome this problem. Synthetic anti-infective drugs have been widely used to treat oral infections, but they have been reported to cause side effects and resistance. Therefore, it is important to look for safe anti-infective alternatives. Ethnobotanical and ethnopharmacological studies suggest that Red Betel leaf (Piper crocatum Ruiz & Pav) could be a potential source of oral anti-infectives. This review aims to discuss the pathogenesis mechanism of several microorganisms that play an important role in causing health problems, the mechanism of action of synthetic oral anti-infective drugs in inhibiting microbial growth in the oral cavity, and the potential of red betel leaf (Piper crocatum Ruiz & Pav) as an herbal oral anti-infective drug. This study emphasises the importance of researching natural components as an alternative treatment for oral infections that is more effective and can meet global needs.

Study on the Antibacterial Activity and Bone Inductivity of Nanosilver/PLGA-Coated TI-CU Implants.

Background: Implants are widely used in the field of orthopedics and dental sciences. Titanium (TI) and its alloys have become the most widely used implant materials, but implant-associated infection remains a common and serious complication after implant surgery. In addition, titanium exhibits biological inertness, which prevents implants and bone tissue from binding strongly and may cause implants to loosen and fall out. Therefore, preventing implant infection and improving their bone induction ability are important goals. Purpose: To study the antibacterial activity and bone induction ability of titanium-copper alloy implants coated with nanosilver/poly (lactic-co-glycolic acid) (NSPTICU) and provide a new approach for inhibiting implant-associated infection and promoting bone integration. Methods: We first examined the in vitro osteogenic ability of NSPTICU implants by studying the proliferation and differentiation of MC3T3-E1 cells. Furthermore, the ability of NSPTICU implants to induce osteogenic activity in SD rats was studied by micro-computed tomography (micro-CT), hematoxylin-eosin (HE) staining, masson staining, immunohistochemistry and van gieson (VG) staining. The antibacterial activity of NSPTICU in vitro was studied with gram-positive Staphylococcus aureus (Sa) and gram-negative Escherichia coli (E. coli) bacteria. Sa was used as the test bacterium, and the antibacterial ability of NSPTICU implanted in rats was studied by gross view specimen collection, bacterial colony counting, HE staining and Giemsa staining. Results: Alizarin red staining, alkaline phosphatase (ALP) staining, quantitative real-time polymerase chain reaction (qRT-PCR) and western blot analysis showed that NSPTICU promoted the osteogenic differentiation of MC3T3-E1 cells. The in vitro antimicrobial results showed that the NSPTICU implants exhibited better antibacterial properties. Animal experiments showed that NSPTICU can inhibit inflammation and promote the repair of bone defects. Conclusion: NSPTICU has excellent antibacterial and bone induction ability, and has broad application prospects in the treatment of bone defects related to orthopedics and dental sciences.

Self-Adapting Biomass Hydrogel Embodied with miRNA Immunoregulation and Long-Term Bacterial Eradiation for Synergistic Chronic Wound Therapy.

Chronic wound rescue is critical for diabetic patients but is challenging to achieve with a specific and long-term strategy. The prolonged bacterial inflammation is particularly prevalent in hyperglycemia-induced wounds, usually leading to severe tissue damage. Such a trend could further suffer from an environmental suitability provided by macrophages for persisting Staphylococcus aureus (S. aureus) and even deteriorate by their mutual reinforcement. However, the strategy of both suppressing bacteria growth and immunoreprogramming the inflammatory type of macrophages to break their vicious harm to wound healing is still lacking. Here, a self-adapting biomass carboxymethyl chitosan (CMC) hydrogel comprising immunomodulatory nanoparticles is reported to achieve Gram-negative/Gram-positive bacteria elimination and anti-inflammatory cytokines induction to ameliorate the cutaneous microenvironment. Mechanistically, antibacterial peptides and CMCs synergistically result in a long-term inhibition against methicillin-resistant S. aureus (MRSA) over a period of 7 days, and miR-301a reprograms the M2 macrophage via the PTEN/PI3Kγ/mTOR signaling pathway, consequently mitigating inflammation and promoting angiogenesis for diabetic wound healing in rats. In this vein, immunoregulatory hydrogel is a promising all-biomass dressing ensuring biocompatibility, providing a perspective to regenerate cutaneous damaged tissue, and repairing chronic wounds on skin.

Harnessing medicinal plant compounds for the control of Campylobacter in foods: a comprehensive review.

Campylobacter is a major foodborne and zoonotic pathogen, causing severe human infections and imposing a substantial economic burden on global public health. The ongoing spread and emergence of multidrug-resistant (MDR) strains across various fields exacerbate therapeutic challenges, raising the incidence of diseases and fatalities. Medicinal plants, renowned for their abundance in secondary metabolites, exhibit proven efficacy in inhibiting various foodborne and zoonotic pathogens, presenting sustainable alternatives to ensure food safety. This review aims to synthesize recent insights from peer-reviewed journals on the epidemiology and antimicrobial resistance of Campylobacter species, elucidate the in vitro antibacterial activity of medicinal plant compounds against Campylobacter by delineating underlying mechanisms, and explore the application of these compounds in controlling Campylobacter in food. Additionally, we discuss recent advancements and future prospects of employing medicinal plant compounds in food products to mitigate foodborne pathogens, particularly Campylobacter. In conclusion, we argue that medicinal plant compounds can be used as effective and sustainable sources for developing new antimicrobial alternatives to counteract the dissemination of MDR Campylobacter strains.

Effect of Ultrasonic Cleaning Combined with Antibacterial Polypeptide Periodontal Gel on Inflammatory Reaction and Incidence of Adverse Reactions in Patients with Chronic Gingivitis.

The purpose of this investigation was to evaluate the efficacy of ultrasonic subgingival curettage in conjunction with antibacterial polypeptide periodontal gel in the management of chronic periodontitis of moderate to severe severity. Methods included dividing 500 hospitalised patients with moderate to severe chronic periodontitis evenly between an observation group and a control group. Subgingival ultrasonic curettage was performed on the placebo group. The non-treatment group received ultrasonic subgingival curettage and a periodontal gel rinse containing polypeptides. Results were compared before and after treatment in terms of the periodontal index, inflammation in the gingival crevicular fluid, and occlusal and masticatory efficiency. Both groups saw significant reductions in occlusal duration and occlusal force balance after treatment compared to pre-treatment levels, though the observation group saw a more dramatic decrease in these indices than the control group with P ≤ 0.05. The treatment and observation groups both saw significant reductions in the masticatory efficiency standard deviation afterward, but the index in the observation group was significantly lower than that of the control group with P ≤ 0.05.The authors claim that moderate to severe chronic periodontitis can be effectively treated with a combination of polypeptide periodontal gel and ultrasonic subgingival curettage. Substantial decreases from pre-treatment levels for both groups, with the Observation Group's index being significantly lower than the Control Group's index (P ≤ 0.05). It is possible that this treatment will help reduce inflammation and improve your periodontal health. Biting strength and occlusion stability can both be improved at the same time to help patients improve their chewing efficiency. Therefore, this method can be used securely in real-world patient care settings.

Enhancing bacterial control and daylight-driven water remediation with chitosan-impregnated MoC nanosheets.

The functionalization of nanoparticles with 2D nanosheets is an effective approach to enhance their functional properties for pollutant removal. This research outlines the synthesis of a 2D-delaminated molybdenum carbide (MXene) chitosan nanocomposite (2D-d-Mo2CTx-Cs NC) with bacterial control and photocatalytic properties for dye adsorption. The nanocomposite includes Tx-surface terminating groups O, OH, and F. In this investigation, the composite was synthesized using the etching method and its formation was confirmed through UV spectra at 288 nm. It was characterized through FTIR, XRD, Particle size, Zetapotential, FESEM, HRTEM, EDAX, and XPS analyses. FTIR spectral analysis of NC suggests that amines are formed through a Schiff base reaction between glutaraldehyde and Cs, or through the interaction of terminal aldehydes and carbonyl groups. The XRD analysis confirmed the crystalline structure of the composite. FESEM images revealed irregularly structured nanosheets (NSs) material in the prepared 2D-d-Mo2CTx-Cs NC samples. HRTEM images revealed 2D-d-Mo2CTx NSs impregnated onto Cs with an average size of 50 nm, as confirmed by a particle size analyzer, with a zeta potential value of - 15 mV. Additionally, Mo, C, N, and O are the most significant elements present in the NC, as confirmed by EDAX and XPS analyses. Further, biocompatibility testing of 2D-d-Mo2CTx-Cs NC yielded positive results. Moreover, under sunlight, the composites effectively adsorbed methylene blue with a 90% adsorption capacity, as confirmed by kinetic studies. Furthermore, the synergistic effect of Cs and d-Mo2CTx NSs resulted in significant antibacterial (50-200 µl of 1 mg/ml) and antibiofilm activity (100 µl of 1 mg/ml) against pathogenic bacteria. Furthermore, this study represents the first report on the use of 2D-d-Mo2CTx-Cs NC for daylight-influenced photocatalytic applications with a bacteria-controlling effect.

Chemical composition and antibacterial activity of essential oils from Daucus sahariensis Murb. roots and stems.

Daucus genus (Apiaceae) comprises economically relevant plants distributed in temperate regions. These plants are used mainly as food but are also known for their biological properties. Here, the essential oils (EOs) obtained by hydro-distillation of roots and stems of D.sahariensis Murb. growing in Algerian Sahara were studied by GC-MS analysis. Fifty-two and fifty-five compounds were identified from the roots and stems, representing 95.1% and 93.8% of the whole EOs respectively. The main constituents of the EO from roots were myristicin (29.2%), (E)-anethole (14.2%), cis-chrysanthenyl acetate (8%) and estragol (7.5%). In the EO from stems, the main constituents were α-pinene (18.6%), myrcene (16.7%), limonene (13.7%) and myristicin (8%). The antibacterial activity of EOs was evaluated by disc diffusion method and tested against Gram-positive and Gram-negative bacteria. Results showed a mild activity against Bacillus subtilis and Klebsiella pneumoniae for both EOs, which can be potentially used as antibacterial in phytotherapy.

Bioinspired Self-Adhesive Multifunctional Lubricated Coating for Biomedical Implant Applications.

In the realm of clinical applications, the concern surrounding biomedical device-related infections (BDI) is paramount. To mitigate the risk associated with BDI, enhancing surface characteristics such as lubrication and antibacterial efficacy is considered as a strategic approach. This study delineated the synthesis of a multifunctional copolymer, embodying self-adhesive, lubricating, and antibacterial properties, achieved through free radical polymerization and a carbodiimide coupling reaction. The copolymer was adeptly modified on the surface of stainless steel 316L (SS316L) substrates by employing a facile dip-coating technique. Comprehensive characterizations were performed by using an array of analytical techniques including Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, optical interferometry, scanning electron microscopy, and atomic force microscopy. Nanoscale tribological assessments revealed a notable reduction in the value of the friction coefficient of the copolymer-coated SS316L substrates compared to bare SS316L samples. The coating demonstrated exceptional resistance to protein adsorption, as evidenced in protein contamination models employing bovine serum albumin and fibrinogen. The bactericidal efficacy of the copolymer-modified surfaces was significantly improved against pathogenic strains such as Staphylococcus aureus and Escherichia coli. Additionally, in vitro evaluations of blood compatibility and cellular compatibility underscored the remarkable anticoagulant performance and biocompatibility. Collectively, these findings indicated that the developed copolymer coating represented a promising candidate, with its facile modification approach, for augmenting lubrication and antifouling properties in the field of biomedical implant applications.

Application of metal-organic frameworks in infectious wound healing.

Metal-organic frameworks (MOFs) are metal-organic skeleton compounds composed of self-assembled metal ions or clusters and organic ligands. MOF materials often have porous structures, high specific surface areas, uniform and adjustable pores, high surface activity and easy modification and have a wide range of prospects for application. MOFs have been widely used. In recent years, with the continuous expansion of MOF materials, they have also achieved remarkable results in the field of antimicrobial agents. In this review, the structural composition and synthetic modification of MOF materials are introduced in detail, and the antimicrobial mechanisms and applications of these materials in the healing of infected wounds are described. Moreover, the opportunities and challenges encountered in the development of MOF materials are presented, and we expect that additional MOF materials with high biosafety and efficient antimicrobial capacity will be developed in the future.

NIR-responsive electrospun nanofiber dressing promotes diabetic-infected wound healing with programmed combined temperature-coordinated photothermal therapy.

BACKGROUND: Diabetic wounds present significant challenges, specifically in terms of bacterial infection and delayed healing. Therefore, it is crucial to address local bacterial issues and promote accelerated wound healing. In this investigation, we utilized electrospinning to fabricate microgel/nanofiber membranes encapsulating MXene-encapsulated microgels and chitosan/gelatin polymers. RESULTS: The film dressing facilitates programmed photothermal therapy (PPT) and mild photothermal therapy (MPTT) under near-infrared (NIR), showcasing swift and extensive antibacterial and biofilm-disrupting capabilities. The PPT effect achieves prompt sterilization within 5 min at 52 °C and disperses mature biofilm within 10 min. Concurrently, by adjusting the NIR power to induce local mild heating (42 °C), the dressing stimulates fibroblast proliferation and migration, significantly enhancing vascularization. Moreover, in vivo experimentation successfully validates the film dressing, underscoring its immense potential in addressing the intricacies of diabetic wounds. CONCLUSIONS: The MXene microgel-loaded nanofiber dressing employs temperature-coordinated photothermal therapy, effectively amalgamating the advantageous features of high-temperature sterilization and low-temperature promotion of wound healing. It exhibits rapid, broad-spectrum antibacterial and biofilm-disrupting capabilities, exceptional biocompatibility, and noteworthy effects on promoting cell proliferation and vascularization. These results affirm the efficacy of our nanofiber dressing, highlighting its significant potential in addressing the challenge of diabetic wounds struggling to heal due to infection.

Fabrication of multifunctional cotton fabrics with quaternized N-halamine endowing the synergetic rechargeable antibacterial, wound healing and self-cleaning performances.

Cotton has attracted considerable attention due to its functional characteristics. The focus of research on cotton has shifted in recent years towards designing multi-functional and modified media for cotton fibers, which can be firmly combined with textiles, giving them reusability and extending their service life. This study constructed a synergistic antibacterial layer of quaternary ammonium compounds (QACs) and N-halamine (Hals) using an in-situ free radical copolymerization method in water, named QACs/Hals@cotton-Cl. The route significantly increases the number of antibacterial active centers. FTIR, XPS, and SEM were used to systematically analyze the product's chemical structure, surface morphology, and other characteristics. The modified fabric's antibacterial efficiency, wound healing, renewability, and durability were also evaluated. The chlorinated modified cotton fabric could completely eradicate S. aureus and E. coli within 10 min. Compared with pure cotton, it notably promoted the healing rate of infected wounds in mice. The modification method imparted excellent hydrophobicity to the cotton fabric, with a contact angle exceeding 130°, making it easy to remove surface stains. After 30 days of regular storage and 24 h of UV irradiation, the active chlorine concentration (Cl+%) only decreased by 25 % and 39 %, respectively, and the reduced Cl+% was effectively recharged via simple re-chlorination. The hydrophobicity and antimicrobial properties of QACs/Hals@cotton-Cl remained stable even after 20 cycles of friction. This simple synthesis technique provides a convenient approach for the scalable fabrication of multifunctional and rechargeable antibacterial textiles, with potential applications in medical devices and personal hygiene protection.

A poly (lactic-co-glycolic acid) /polyethylene glycol/doped hydroxyapatite/sodium alginate dressing with bidirectional biofluid transport for diabetic wound healing.

Diabetic wound healing poses a substantial challenge owing to bacterial infections, insufficient angiogenesis, and excessive exudates. Currently, most of the clinical dressings used for diabetic wounds are still conventional dressings such as gauze. In this study, a three-layer Janus dressing was developed via continuous electrostatic spinning. The top-layer was composed of polylactic acid-glycolic acid and hydroxyapatite doped with silver ions and silicate. The hydrophobic top-layer prevented the adhesion of foreign bacteria. The mid-layer was composed of polyethylene glycol, polylactic acid-glycolic acid and hydroxyapatite doped with silver ions and silicate facilitated exudate absorption and bioactive ion release. The modified sub-layer containing polylactic acid-glycolic acid, hydroxyapatite doped with silver ions and silicate and sodium alginate microspheres enabled both the transport of wound exudate from the wound bed to dressing and the backflow of bioactive silver ions and silicate to the wound bed, thereby reducing infection and stimulating angiogenesis. Through in vivo and in vivo experiments, the Janus dressing showed to have antimicrobial, angiogenic, and exudate-control properties that accelerate healing in diabetic wounds. As a novel dressing, the multifunctional, self-pumping Janus wound dressing with bi-directional biofluidic transport offers a new approach to diabetic wound healing.

"All-in-one" self-healing and injectable cationic guar gum hydrogel dressing functionalized by bioactive complexes composed of natural small molecules.

Reducing the risk of wound infection is an urgent issue health priority. Antibacterial polysaccharide-based hydrogels have attracted great attention for infectious wounds, attributed to their safe antimicrobial performance and natural non-toxicity and biodegradability advantages. In this study, the "all-in-one" self-adaptive and injectable cationic guar gum (CG)-based polysaccharide hydrogels (FA-TOB/CG) loaded with bioactive complexes were developed for infectious wound healing. The constructed antioxidant and antibacterial ferulic acid (FA)-tobramycin (TOB) bioactive complexes (FA-TOB) were used as the cross-linking agent and introduced into the CG matrix to construct the FA-TOB/CG hydrogel with a three-dimensional porous structure. The sterilization rates of FA-TOB/CG hydrogel against S. aureus and E. coli reached 98 % and 80 % respectively. In addition, the FA-TOB/CG also exhibits enhanced antioxidant performances (DPPH: > 40 %; ABTS: > 90 %; ·OH: > 50 %). More importantly, FA-TOB/CG hydrogel also showed the ability to sustain the release of FA and TOB. These superiorities of the FA-TOB/CG hydrogel enabled it to provide a moist wound environment and promote wound healing by eliminating bacteria, modulating the local inflammatory response, and accelerating collagen deposition and vascular regeneration. Thus, this study may enlarge a new sight for developing multifunctional dressings by incorporating bioactive complexes into polysaccharide hydrogels for infected wounds.

An injectable hydrogel based on sodium alginate and gelatin treats bacterial keratitis through multimodal antibacterial strategy.

Bacterial keratitis is among the most prevalent causes of blindness. Currently, the abuse of antibiotics in clinical settings not only lacks bactericidal effects but also readily induces bacterial resistance, making the clinical treatment of bacterial keratitis a significant challenge. In this study, we present an injectable hydrogel (GS-PNH-FF@CuS/MnS) containing self-assembled diphenylalanine dipeptide (FF) and CuS/MnS nanocomposites (CuS/MnS NCs) that destroy bacterial cell walls through a synergistic combination of mild photothermal therapy (PTT), chemodynamic therapy (CDT), ion release chemotherapy, and self-assembled dipeptide contact, thereby eliminating Pseudomonas aeruginosa. Under 808 nm laser irradiation, the bactericidal efficiency of GS-PNH-FF@CuS/MnS hydrogel against P. aeruginosa in vitro reach up to 96.97 %. Furthermore, GS-PNH-FF@CuS/MnS hydrogel is applied topically to kill bacteria, reduce inflammation, and promote wound healing. Hematoxylin-eosin (H&E) staining, Masson staining, immunohistochemistry and immunofluorescence staining are used to evaluate the therapeutic effect on infected rabbit cornea models in vivo. The GS-PNH-FF@CuS/MnS demonstrate good biocompatibility with human corneal epithelial cells and exhibit no obvious eyes side effects. In conclusion, the GS-PNH-FF@CuS/MnS hydrogel in this study provides an effective and safe treatment strategy for bacterial keratitis through a multimodal approach.

Antibacterial Effect of Euryale ferox Seed Shell Polyphenol Extract on Salmonella Typhimurium.

This study aimed to evaluate the effects of Euryale ferox Seed Shell Polyphenol Extract (EFSSPE) on a foodborne pathogenic bacterium. EFSSPE showed antimicrobial activity toward Salmonella Typhimurium CICC 22956; the minimum inhibitory concentration of EFSSPE was 1.25 mg/mL, the inhibition curve also reflected the inhibitory effect of EFSSPE on the growth of S. Typhimurium. Detection of alkaline phosphatase outside the cell revealed that EFSSPE treatment damaged the cell wall integrity of S. Typhimurium. EFSSPE also altered the membrane integrity, thereby causing leaching of 260-nm-absorbing material (bacterial proteins and DNA). Moreover, the activities of succinate dehydrogenase and malate dehydrogenase were inhibited by EFSSPE. The hydrophobicity and clustering ability of cells were affected by EFSSPE. Scanning electron microscopy showed that EFSSPE treatment damaged the morphology of the tested bacteria. These results indicate that EFSSPE can destroy the cell wall integrity and alter the permeability of the cell membrane of S. Typhimurium.

"Coir Raincoat"-Boosted Biomimetic Hydrogel for Efficient Solar Desalination and Wastewater Purification.

Solar-driven interfacial evaporation is an efficient method for purifying contaminated or saline water. Nonetheless, the suboptimal design of the structure and composition still necessitates a compromise between evaporation rate and service life. Therefore, achieving efficient production of clean water remains a key challenge. Here, a biomimetic dictyophora hydrogel based on loofah/carbonized sucrose@ZIF-8/polyvinyl alcohol is demonstrated, which can serve as an independent solar evaporator for clean water recovery. This special structural design achieves effective thermal positioning and minimal heat loss, while reducing the actual enthalpy of water evaporation. The evaporator achieves a pure water evaporation rate of 3.88 kg m-2 h-1 and a solar-vapor conversion efficiency of 97.16% under 1 sun irradiation. In comparison, the wastewater evaporation rate of the evaporator with ZIF-8 remains at 3.85 kg m-2 h-1 for 30 days, which is 16.3% higher than the light irradiation without ZIF-8. Equally important, the evaporator also showcases the capability to cleanse water from diverse sources of contaminants, including those with small molecules, oil, heavy metal ions, and bacteria, greatly improving the lifespan of the evaporator.

Integrating bacterial molecular genetics with chemical biology for renewed antibacterial drug discovery.

The application of dyes to understanding the aetiology of infection inspired antimicrobial chemotherapy and the first wave of antibacterial drugs. The second wave of antibacterial drug discovery was driven by rapid discovery of natural products, now making up 69% of current antibacterial drugs. But now with the most prevalent natural products already discovered, ∼107 new soil-dwelling bacterial species must be screened to discover one new class of natural product. Therefore, instead of a third wave of antibacterial drug discovery, there is now a discovery bottleneck. Unlike natural products which are curated by billions of years of microbial antagonism, the vast synthetic chemical space still requires artificial curation through the therapeutics science of antibacterial drugs - a systematic understanding of how small molecules interact with bacterial physiology, effect desired phenotypes, and benefit the host. Bacterial molecular genetics can elucidate pathogen biology relevant to therapeutics development, but it can also be applied directly to understanding mechanisms and liabilities of new chemical agents with new mechanisms of action. Therefore, the next phase of antibacterial drug discovery could be enabled by integrating chemical expertise with systematic dissection of bacterial infection biology. Facing the ambitious endeavour to find new molecules from nature or new-to-nature which cure bacterial infections, the capabilities furnished by modern chemical biology and molecular genetics can be applied to prospecting for chemical modulators of new targets which circumvent prevalent resistance mechanisms.

A Se Nanoparticle/MgFe-LDH Composite Nanosheet as a Multifunctional Platform for Osteosarcoma Eradication, Antibacterial and Bone Reconstruction.

Despite advances in treating osteosarcoma, postoperative tumor recurrence, periprosthetic infection, and critical bone defects remain critical concerns. Herein, the growth of selenium nanoparticles (SeNPs) onto MgFe-LDH nanosheets (LDH) is reported to develop a multifunctional nanocomposite (LDH/Se) and further modification of the nanocomposite on a bioactive glass scaffold (BGS) to obtain a versatile platform (BGS@LDH/Se) for comprehensive postoperative osteosarcoma management. The uniform dispersion of negatively charged SeNPs on the LDH surface restrains toxicity-inducing aggregation and inactivation, thus enhancing superoxide dismutase (SOD) activation and superoxide anion radical (·O2 -)-H2O2 conversion. Meanwhile, Fe3+ within the LDH nanosheets can be reduced to Fe2+ by depleting glutathione (GSH) in the tumor microenvironments (TME), which can catalyze H2O2 into highly toxic reactive oxygen species. More importantly, incorporating SeNPs significantly promotes the anti-bacterial and osteogenic properties of BGS@LDH/Se. Thus, the developed BGS@LDH/Se platform can simultaneously inhibit tumor recurrence and periprosthetic infection as well as promote bone regeneration, thus holding great potential for postoperative "one-stop-shop" management of patients who need osteosarcoma resection and scaffold implantation.

Maghamesin, a new prenylated flavanone from artocarpus heterophyllus lam. (moraceae).

The chemical investigation of the methanol root extract of Artocarpus heterophyllus Lam. led to the isolation of a new prenylated flavanone, 5,7,4'-trihydroxy-3'-(3-methylbuta-1,3-dienyl)-5'-(3-methylbut-2-enyl)flavanone, trivially named maghamesin (1), together with nine known compounds, 5-hydroxy-3',4',5',7-tetramethoxy-8-prenylflavanone (2), cycloheterophyllin (3), cyclomorusin (4), isobavachalcone (5), trans-isoferulic acid (6), 24-methylenecycloartan-3α-ol (7), stigmasterol (8), ß-sitosterol (9) and ß-sitosterol-3-O-ß-D-glucopyranoside (10). The structures of the isolates were elucidated by extensive spectroscopic and spectrometric analyses (1D and 2D NMR, ESI-MS) and by comparison with previously reported data. The absolute configuration of 1 was deduced by comparison of its experimental CD with that of a reported similar compound. Compounds 1-3 and 6-7 were tested for their antibacterial and antifungal activities. Compound 1 displayed a significant antibacterial activity against Staphylococcus aureus with MIC value of 15.625 µg/mL. The others tested compounds showed moderate antibacterial and antifungal activities against several microorganisms with MIC values of either 31.25 or 62.5 µg/mL.