Evaluation of Buccolingual Inclinations of First Molars Among Different Vertical Facial Patterns in Class II Division I Subjects.

Background Knowing the characteristics of vertical patterns is crucial to provide the best orthodontic treatment. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating true buccolingual inclinations. The current study investigates the buccolingual inclination of first molars in adult subjects with different vertical facial patterns. Methods CBCT scans of 66 adult patients (31 males, 35 females) with a mean age of 31.6 years (SD: 6.4 years) exhibiting skeletal class II division I maxillomandibular relationships were employed. Participants were categorized into three groups based on linear and angular measurements: normodivergent group (n=22), hypodivergent group (n=22), and hyperdivergent group (n=22). The independent samples t-test and Mann-Whitney U-test were conducted to investigate statistical differences in terms of buccolingual inclination between the three vertical patterns. Results Statistically significant differences were observed in the buccolingual inclinations of both maxillary and mandibular first molars in the hypodivergent group compared to the other groups (p<0.05). Conclusions In patients with class II division I sagittal relationships, the buccolingual inclinations of the first molars exhibit similarities between normodivergent and hyperdivergent groups. However, these inclinations differ significantly in hypodivergent adult subjects.

Cone-Beam Computed Tomography Study of Incisive Canal and Maxillary Central Incisors in Dravidian Population.

INTRODUCTION:  En-masse maxillary anterior retraction is necessary to attain an esthetic profile in Angle's class I bimaxillary dentoalveolar protrusion and Angle's class II division 1 malocclusion. The objective of this study was to evaluate configurational relationships between maxillary incisors and incisive canal in Angle's class I bialveolar protrusion and Angle's class II division 1 malocclusion by cone-beam computed tomography (CBCT). METHODS: A total of 108 adult CBCT scans of 54-skeletal class I bialveolar protrusion and 54-skeletal class II division 1 malocclusions were retrospectively analyzed. Angles between palatal plane and axis of maxillary alveolar border (θ1), incisive canal (θ2), and maxillary right central incisor (θ3) were measured in relation to the midsagittal plane. Linear measurements such as incisive canal width (IC-IC), medial inter-root distance (Rm-Rm), posterior inter-root distance (Rp-Rp), anteroposterior distance from Rm to tangent of right central incisor (11 Rm-Cat), and left central incisor (21 Rm-Cat) corresponding to three vertical levels (L1, L2, and L3) were assessed in axial cross-sectional plane. Association among angular measurements was examined by Spearman correlation coefficient analysis. Mann-Whitney U test compared variables of linear measurements at three vertical levels. RESULTS:  Estimated distance from incisor root to incisive canal was 5-6 mm in both groups slightly influenced by skeletal class and vertical levels but not gender. Mann-Whitney test demonstrated significant differences between groups at three vertical levels (p<0.05). Only θ2 revealed a significant difference (p<0.05) between malocclusions compared to θ1 and θ3. The angular measurements for both malocclusions were positively correlated (p<0.05). CONCLUSION:  Sagittal root-canal cortical plate distance varied significantly in both malocclusions (5-6 mm). Inter-root distance (Rp-Rp) was greater than incisive canal width (IC-IC) at all three vertical levels indicating a reduced possibility of canal invasion after maximum retraction at posterior levels.

Technical note: Phantom-based evaluation of CBCT dose calculation accuracy for use in adaptive radiotherapy.

BACKGROUND: High-quality 3D-anatomy of the day is needed for treatment plan adaptation in radiotherapy. For online x-ray-based CBCT workflows, one approach is to create a synthetic CT or to utilize a fan-beam CT with corresponding registrations. The former potentially introduces uncertainties in the dose calculation if deformable image registration is used. The latter can introduce burden and complexity to the process, the facility, and the patient. PURPOSE: Using the CBCT of the day, acquired on the treatment device, for direct dose calculation and plan adaptation can overcome these limitations. This study aims to assess the accuracy of the calculated dose on the CBCT scans acquired on a Halcyon linear accelerator equipped with HyperSight. METHODS: HyperSight's new CBCT reconstruction algorithm includes improvements in scatter correction, HU calibration of the imager, and beam shape adaptation. Furthermore, HyperSight introduced a new x-ray detector. To show the effect of the implemented improvements, gamma comparisons of 2%/2 mm, 2%/1 mm, and 1%/1 mm were made between the dose distribution in phantoms calculated on the CBCT reconstructions and the simulation CT scans, considering this the standard of care. The resulting gamma passing rates were compared to those obtained with the Halcyon 3.0 reconstruction and hardware without HyperSight's technologies. Various anatomical phantoms for dosimetric evaluations on brain, head and neck, lung, breast, and prostate cases have been used in this study. RESULTS: The overall results demonstrated that HyperSight outperformed the Halcyon 3.0 version. Based on the gamma analysis, the calculated dose using HyperSight was closer to the CT scan-based doses than the calculated dose using iCBCT Halcyon 3.0 for most cases. Over all plans and gamma criteria, Halcyon 3.0 achieved an average passing rate of 92.9%, whereas HyperSight achieved 98.1%. CONCLUSION: Using HyperSight CBCT images for direct dose calculation, for example, in (online) plan adaptation, seems feasible for the investigated cases.

Leveraging Pre-Trained Transformers for Efficient Segmentation and Lesion Detection in Cone-Beam CT Scans.

INTRODUCTION: Cone-beam computed tomography (CBCT) is widely used to detect jaw lesions, although CBCT interpretation is time-consuming and challenging. Artificial intelligence (AI) for CBCT segmentation may improve lesion detection accuracy. However, consistent automated lesion detection remains difficult, especially with limited training data. This study aimed to assess the applicability of pre-trained transformer-based architectures for semantic segmentation of CBCT volumes when applied to periapical lesion detection. METHODS: CBCT volumes (n=138) were collected and annotated by expert clinicians using five labels - "lesion", "restorative material", "bone", "tooth structure", and "background". U-Net (convolutional neural network (CNN)-based) and Swin-UNETR (transformer-based) models, pre-trained (Swin-UNETR-PRETRAIN) and from scratch (Swin-UNETR-SCRATCH), were trained with subsets of the annotated CBCTs. These models were then evaluated for semantic segmentation performance using the Sørensen-Dice coefficient (DICE), lesion detection performance using sensitivity and specificity, and training sample size requirements by comparing models trained with 20, 40, 60, or 103 samples. RESULTS: Trained with 103 samples, Swin-UNETR-PRETRAIN achieved a DICE of 0.8512 for "lesion", 0.8282 for "restorative materials", 0.9178 for "bone", 0.9029 for "tooth structure", and 0.9901 for "background". "Lesion" DICE was statistically similar between Swin-UNETR-PRETRAIN trained with 103 and 60 images (P>.05), with the latter achieving 1.00 sensitivity and 0.94 specificity in lesion detection. With small training sets, Swin-UNETR-PRETRAIN outperformed Swin-UNETR-SCRATCH in DICE over all labels (P<.001 [n=20], P<.001 [n=40]), and U-Net in lesion detection specificity (P=.006 [n=20], P=.031 [n=40]). CONCLUSIONS: Transformer-based Swin-UNETR architectures allowed for excellent semantic segmentation and periapical lesion detection. Pre-trained, it may provide an alternative with smaller training datasets compared to classic U-Net architectures.

Treatment options for impacted maxillary canines and occurrence of ankylotic and resorptive processes: a 20-year retrospective study.

BACKGROUND: This 20-year retrospective study aimed to evaluate the treatment methods used in patients with impacted maxillary permanent canines and to determine the occurrence of ankylotic and resorptive processes and their association with potential risk factors. METHODS: The cohort consisted of 351 consecutive Caucasian patients (120 males and 231 females, mean age 18.4 and 19.9 years, respectively) with 420 impacted maxillary permanent canines. CT and CBCT findings were subsequently confirmed during surgery. Statistical analyses were performed by the generalized linear models, Pearson x2 and Fisher exact tests using the statistical programs R and Statistica v. 14. RESULTS: A total of 273 (65.0%) impacted canines were aligned in the dental arch by orthodontic traction after surgical exposure, this treatment was predominant in patients under 20 years of age. Surgical extraction was performed in 115 (27.2%) impacted canines and was more common in older patients. Ankylotic changes were recorded in 61 (14.5%) impacted canines. The probability of ankylosis increased with age, particularly after the patient's 20th year of life (p < 0.001). Patients were 1.2% likely to develop ankylosis at age 15 years, 4.3% at age 20 years, 14.1% at age 25 years, and 96.8% at age 45 years. Invasive cervical root resorption (ICRR) was found in 8 (1.9%) canines. In 4 canines (1.0%), root ankylosis in addition to ICRR was observed. In contrast to ankylosis, whose frequency of occurrence increased with age, the occurrence of ICRR resulting from PDL damage during surgery was more typical in younger patients. Canines in a high position above the root apices of the adjacent teeth, with a horizontal inclination of the longitudinal axis, with the crown located deep in the center of the alveolar bone and with labiopalatal position, should be considered critically impacted canines with a high risk to failure of orthodontic traction. CONCLUSION: In conclusion, the treatment of impacted canines depends mainly on the age of the patient, and the position and inclination of the longitudinal axis of the impacted tooth. To select an adequate treatment method, we recommend CBCT examination, which allows a precise analysis of the position of impacted canines.

CBCT-based synthetic CT image generation using a diffusion model for CBCT-guided lung radiotherapy.

BACKGROUND: Although cone beam computed tomography (CBCT) has lower resolution compared to planning CTs (pCT), its lower dose, higher high-contrast resolution, and shorter scanning time support its widespread use in clinical applications, especially in ensuring accurate patient positioning during the image-guided radiation therapy (IGRT) process. PURPOSE: While CBCT is critical to IGRT, CBCT image quality can be compromised by severe stripe and scattering artifacts. Tumor movement secondary to respiratory motion also decreases CBCT resolution. In order to improve the image quality of CBCT, we propose a Lung Diffusion Model (L-DM) framework. METHODS: Our proposed algorithm is based on a conditional diffusion model trained on pCT and deformed CBCT (dCBCT) image pairs to synthesize lung CT images from dCBCT images and benefit CBCT-based radiotherapy. dCBCT images were used as the constraint for the L-DM. The image quality and Hounsfield unit (HU) values of the synthetic CTs (sCT) images generated by the proposed L-DM were compared to three selected mainstream generation models. RESULTS: We verified our model in both an institutional lung cancer dataset and a selected public dataset. Our L-DM showed significant improvement in the four metrics of mean absolute error (MAE), peak signal-to-noise ratio (PSNR), normalized cross-correlation (NCC), and structural similarity index measure (SSIM). In our institutional dataset, our proposed L-DM decreased the MAE from 101.47 to 37.87 HU and increased the PSNR from 24.97 to 29.89 dB, the NCC from 0.81 to 0.97, and the SSIM from 0.80 to 0.93. In the public dataset, our proposed L-DM decreased the MAE from 173.65 to 58.95 HU, while increasing the PSNR, NCC, and SSIM from 13.07 to 24.05 dB, 0.68 to 0.94, and 0.41 to 0.88, respectively. CONCLUSIONS: The proposed L-DM significantly improved sCT image quality compared to the pre-correction CBCT and three mainstream generative models. Our model can benefit CBCT-based IGRT and other potential clinical applications as it increases the HU accuracy and decreases the artifacts from input CBCT images.

Temporomandibular Joint Disorders and Pain Confounders: An Awareness Study.

OBJECTIVES: Temporomandibular disorders (TMD) are the most common nonodontogenic cause of orofacial pain, leading to morbidity and impairment. TMD presents a diagnostic challenge due to many aetiologies that exhibit comparable symptoms and refer pain to the temporomandibular joint (TMJ) region. Patients may be referred to dental specialists without accounting for all pain sources. This study aims to identify radiographic confounders (RCs) that can be mistaken for TMD in patients undergoing TMJ assessment using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A review of 369 CBCT oral maxillofacial radiology reports of the TMJ acquired between July 2020 and June 2023 was completed. Pertinent RCs were classified as endodontic lesions, impacted dentition, sinus pathologies, root fractures, soft tissue calcifications, and others. The chi-squared test assessed the significance of the relationship between RCs and patient variables. RESULTS: A total of 283 RCs were identified in 202 of the 369 cases (54.7%). The most frequent findings included sinus abnormalities (32.5%), endodontic lesions (15.2%), impacted dentition (12.7%), and elongated/calcified stylohyoid process (9.2%). Significant associations were found between sinus pathologies with TMD signs (P = .009) and gender (P = .001). CONCLUSION: Our results indicate that RCs that mimic TMD-related symptoms are prevalent in patients referred for TMJ CBCT imaging. CLINICAL RELEVANCE: Clinicians should be aware of these RCs when diagnosing complaints related to the TMJ. We recommend clinicians first obtain dental clearance and investigate all other potential sources of a patient's complaint before initiating referrals to avoid unnecessary costs and delays in patient care.

Anatomical Factors of the Anterior and Posterior Maxilla Affecting Immediate Implant Placement Based on Cone Beam Computed Tomography Analysis: A Narrative Review.

BACKGROUND: The aim of this narrative review was to provide insights into the influence of the morphological characteristics of the anatomical structures of the upper jaw based on cone beam computed tomography (CBCT) analysis on the immediate implant placement in this region. MATERIAL AND METHODS: To conduct this research, we used many electronic databases, and the resulting papers were chosen and analyzed. From the clinical point of view, the region of the anterior maxilla is specific and can be difficult for immediate implant placement. FINDINGS: Anatomical structures in the anterior maxilla, such as the nasopalatine canal and accessory canals, may limit and influence the implant therapy outcome. In addition to the aforementioned region, immediate implant placement in the posterior maxilla may be challenging for clinicians, especially in prosthetic-driven immediate implant placement procedures. Data presented within the recently published materials summarize the investigations performed in order to achieve more reliable indicators that may make more accurate decisions for clinicians. CONCLUSION: The possibility for immediate implant placement may be affected by the NPC shape in the anterior maxilla, while the presence of ACs may increase the incidence of immediate implant placement complications. The variations in IRS characteristics may be considered important criteria for choosing the implant properties required for successful immediate implant placement.

Prevalence and topography of bifid and trifid mandibular canal in Turkish Western Anatolia Population: evaluation of the inferior alveolar canal with CBCT.

PURPOSE: Various anatomical variations of the inferior alveolar canal increase the incidence of surgical complications; Therefore, this study aimed to evaluate the frequency and configuration of bifid and trifid mandibular canals using cone beam computed tomography (CBCT) in the Turkish subpopulation. METHODS: The inferior alveolar canal was evaluated on 1014 hemi-mandibles in the CBCT (I-CAT 3D Imaging System) images of 513 patients. The frequency and configuration of the bifid and trifid mandibular canal (MC) were examined. The relationship between bifid MC configuration and dental status and age groups was analyzed. The distance of the accessory canal to the buccal and lingual walls and the alveolar crest was measured. The diameter of the main canal and accessory canal was measured and its relationship with dental status and age groups was evaluated. RESULTS: Bifid MC was found in 266 hemi-mandibles (24.7%) and 212 (41.3%) of 513 patients. The most common type of bifid MC was the retromolar canal (87 sides), followed by the forward canal without confluence (41; 4%) and the dental canal (34; 3.4%). 10 of the dental canals were opening to the 1st molar, 14 of the 2nd molars, and 10 of the 3rd molars. The number of retromolar foramina was 1 on 56 sides, 2 on 15 sides, and 3 on 4 sides. Forward canal without confluence was more common in edentulous patients than in dentulous patients, while the dental canal was more common in dentulous patients. The main canal diameter was 3.53 ± 0.97 mm and the bifid MC diameter was 1.82 ± 0.70 mm. Distance of the bifid MC to the lingual wall was higher in the > 64 years group than in the 18-39 years group (p = 0.022). Distance of the bifid MC to the alveolar crest was lower in the > 64 years group compared to the 18-39 years group and 40-64 years group (p = 0.015). The main canal diameter was higher in the 40-64 years group than in the 18-39 years group (p = 0.012). CONCLUSION: Bifid MC has a high prevalence, occurring in almost one in two patients. Dental and retromolar types, which are close to the teeth, are more common, and this increases the possibility of complications. CBCT is the most accurate imaging technique used to detect and define these variations.

Deep Inspiration breath Hold facilitates surgical cavity registration on cone beam imaging for Partial breast irradiation.

BACKGROUND AND PURPOSE: The quality of the Cone Beam Computed Tomography (CBCT) images used for patient set-up is essential to avoid geographical miss when narrower margins or shorter fractionation are used for example in Accelerated Partial Breast Irradiation (APBI). This study evaluates deep inspiration breath hold (DIBH) with skin guided radiotherapy as a tool for image improvement reducing motion artifacts. MATERIALS AND METHODS: Daily CBCT images of left and right breast cancer patients with well-defined surgical cavity on CT simulation were used for this study. Only left sided CBCT were acquired with DIBH. Trained and experienced radiation therapists were asked to evaluate the image quality using a cavity visualization score (CVS), an image quality Likert score, and to perform registration shifts. Images were anonymized and therapists were blinded to the use of DIBH. RESULTS: Images from 21 patients, with 15 CBCT each, were evaluated by 6 radiation therapists, generating 4,015 evaluation points. Statistically significant improvements were observed in CVS and image quality (p < 0.001) with DIBH. Also, the rate of surgical cavity identification increased to 76 % with DIBH compared to 56 % without (p < 0.001). DIBH significantly reduced the inter-observer variability in registration shift corrections (p < 0.001) CONCLUSION: Utilizing DIBH for motion control improves both the image quality and the surgical cavity identification. This results in a decrease in registration variability, which is important for APBI accuracy.

Evaluation of alveolar bone width alterations around dental implants.

Teeth that are lost can be replaced with dental implants. A sufficient width of bone surrounding the implant is beneficial to its success. Therefore, it is of interest to examine alterations in width of alveolar bone surrounding dental implants at natural and rebuilt bone locations [alveolar ridge preservation (ARP) /Guided Bone Regeneration (GBR)] using CTBT. A CBCT examination of the implant recipient site was performed on sixty patients (both male and female), who had undergone dental implants. All conventional surgical procedures were followed for inserting dental implants. All participants had their horizontal alveolar bone widths around implants assessed at 3 positions: subcrestal width 1 mm (CW1 (crestal level-CW1), subcrestal width 4 mm (CW4), and subcrestal width 7 mm (CW7). There were 32 male patients and 28 female patients out of 60 totals. The mean bone width was 7.02 mm at CW1 prior to surgery and 6.91 mm afterward; it was 8.52 mm at CW4 and 8.13 mm afterward; and it was 10.21 mm at CW7 prior to surgery and 10.08 mm afterward. There was a substantial difference (P<0.05). At CW1, the bone width was 0.38 mm at local bone and -0.02 mm at ARP/GBR; at CW4, the bone width was 0.46 mm at local bone and 0.23 mm at ARP/GBR; and at CW7, the bone width was 0.22 mm at local bone and 0.02 mm at ARP/GBR. There was no discernible difference (P>0.05). Resorption of the alveolar bone width was only noticeable at the middle third of the sites. Long-term alterations in the alveolar bone width surrounding dental implants at local and rebuilt bone sites can be observed using CBCT images.

Competence of allogenic demineralized tooth matrix in socket seal surgery for alveolar ridge preservation: a randomized control clinical trial.

OBJECTIVES: To assess and compare the clinical, radiological, and histological outcomes of socket seal surgery between two protocols: deproteinized demineralized tooth matrix (dpDTM) and freeze-dried bone allograft (FDBA) each covered with a free gingival graft. MATERIALS AND METHODS: Twenty extraction sockets in the anterior or premolar region were randomly allocated to either the dpDTM or FDBA protocol (n = 10 per group). Measurements of the alveolar ridge changes were obtained using an intraoral scanner and cone-beam computed tomography at 3 months post-operation. Three-month post surgery, the dental implant was installed (n = 5 per group), bone biopsies were obtained for histomorphometrical and micro-computed tomography analyses. Implant stability quotients (ISQs) were determined and compared at 3 months post-implant. RESULTS: Lower significant reductions in buccal alveolar ridge height and hard tissue volume were observed in dpDTM group compared to FDBA group at 3 months (0.25 ± 0.35 mm vs. 1.60 ± 0.66 mm [p = .000] and 9.64 ± 15.39% mm3 vs. 31.45 ± 18.11% mm3 [p = .010], respectively). At the same time, lower soft tissue volume reduction was detected in the dpDTM group compared to FDBA group (4.21 ± 5.25% mm3 vs. 5.25 ± 5.79% mm3). No statistically significant difference in the percentage of mineralized tissue formation was found between dpDTM group (53.39 ± 11.16%) and FDBA group (49.90 ± 3.27%). Even though the ISQ in the dpDTM group showed a higher value than the FDBA group at 3 months post-implant, the results were without statistical significance. CONCLUSIONS: Alveolar ridge preservation using dpDTM is an efficacious procedure for providing the conditions for the development of functional and esthetic implants.

Feasibility of a Novel Surface-Guided Setup Technique to Reproduce Neck Curvature Using two Regions of Interest.

PURPOSE: To improve the setup reproducibility of neck curvature using real-time optical surface imaging (OSI) guidance on 2 regions of interest (ROIs) to infer cervical spine (c-spine) curvature for surface-guided radiotherapy (SGRT) of head-and-neck (HN) and c-spine cancer. METHODS: A novel SGRT setup approach was designed to reproduce neck curvature with 2 ROIs: upper-chest ROI and open-face ROI. It was hypothesized that the neck curvature could be reproduced if both ROIs were aligned within ±3 mm/2˚ tolerance. This was tested prospectively in 7 volunteers using real-time 3D-OSI guidance and lateral 2D-photography verification after the 3D and 2D references were captured from the initial conventional setup. Real-time SGRT was performed to align chest-ROI and face-ROI, and the longitudinal distance between them was adjustable using a head-support slider. Verification of neck curvature anteriorly and posteriorly was achieved by overlaying edge-extracted lateral pictures. Retrospectively, the relationship between anterior surface and spinal canal alignment was checked in 11 patients using their simulation CT (simCT) and setup cone-beam CT (CBCT). After the anterior surface was rigidly aligned, the spinal canal alignment was checked and quantified using the mean-distance-to-agreement (MDA) and DICE similarity index, and surface-to-spine correlation was calculated. RESULTS: The reproducibility of neck curvatures using the 2xROI SGRT setup is verified and the mean neck-outline-matching difference is within ±2 mm in lateral photographic overlays. The chest-ROI alignment takes 110 ± 58 s and the face-ROI takes 60 ± 35 s. When the anterior body surface is aligned (MDA = 1.1 ± 0.6 mm, DICE = 0.96 ± 0.02,) the internal spinal canal is also aligned (MDA = 1.0 ± 0.3 mm, DICE = 0.84 ± 0.04) in 11 patients. The surface-to-spine correlation is c = 0.90 (MDA) and c = 0.85 (DICE). CONCLUSION: This study demonstrates the feasibility of the novel 2-ROI SGRT setup technique to achieve reproducible neck and c-spine curvature regardless of neck visibility and availability as ROI. Staff training is needed to adopt this unconventional SGRT technique to improve patient setup.

Progressive auto-segmentation for cone-beam computed tomography-based online adaptive radiotherapy.

Background and purpose: Accurate and automated segmentation of targets and organs-at-risk (OARs) is crucial for the successful clinical application of online adaptive radiotherapy (ART). Current methods for cone-beam computed tomography (CBCT) auto-segmentation face challenges, resulting in segmentations often failing to reach clinical acceptability. Current approaches for CBCT auto-segmentation overlook the wealth of information available from initial planning and prior adaptive fractions that could enhance segmentation precision. Materials and methods: We introduce a novel framework that incorporates data from a patient's initial plan and previous adaptive fractions, harnessing this additional temporal context to significantly refine the segmentation accuracy for the current fraction's CBCT images. We present LSTM-UNet, an innovative architecture that integrates Long Short-Term Memory (LSTM) units into the skip connections of the traditional U-Net framework to retain information from previous fractions. The models underwent initial pre-training with simulated data followed by fine-tuning on a clinical dataset. Results: Our proposed model's segmentation predictions yield an average Dice similarity coefficient of 79% from 8 Head & Neck organs and targets, compared to 52% from a baseline model without prior knowledge and 78% from a baseline model with prior knowledge but no memory. Conclusions: Our proposed model excels beyond baseline segmentation frameworks by effectively utilizing information from prior fractions, thus reducing the effort of clinicians to revise the auto-segmentation results. Moreover, it works together with registration-based methods that offer better prior knowledge. Our model holds promise for integration into the online ART workflow, offering precise segmentation capabilities on synthetic CT images.

Combined biological effects of CBCT and therapeutic X-ray dose on chromosomal aberrations of lymphocytes.

BACKGROUND AND PURPOSE: Cone beam computed tomography (CBCT) is routinely used in radiotherapy to localize target volume. The aim of our study was to determine the biological effects of CBCT dose compared to subsequent therapeutic dose by using in vitro chromosome dosimetry. MATERIALS AND METHODS: Peripheral blood samples from five healthy volunteers were irradiated in two phantoms (water filled in-house made cylindrical, and Pure Image CTDI phantoms) with 6 MV FFF X-ray photons, the dose rate was 800 MU/min and the absorbed doses ranged from 0.5 to 8 Gy. Irradiation was performed with a 6 MV linear accelerator (LINAC) to generate a dose-response calibration curve. In the first part of the investigation, 1-5 CBCT imaging was used, in the second, only 2 Gy doses were delivered with a LINAC, and then, in the third part, a combination of CBCT and 2 Gy irradiation was performed mimicking online adapted radiotherapy treatment. Metaphases were prepared from lymphocyte cultures, using standard cytogenetic techniques, and chromosomal aberrations were evaluated. Estimate doses were calculated from chromosome aberrations using dose-response curves. RESULTS: Samples exposed to X-ray from CBCT imaging prior to treatment exhibited higher chromosomal aberrations and Estimate dose than the 2 Gy therapeutic (real) dose, and the magnitude of the increase depended on the number of CBCTs: 1-5 CBCT corresponded to 0.04-0.92 Gy, 1 CBCT + 2 Gy to 2.32 Gy, and 5 CBCTs + 2 Gy to 3.5 Gy. CONCLUSION: The estimated dose based on chromosomal aberrations is 24.8% higher than the physical dose, for the combination of 3 CBCTs and the therapeutic 2 Gy dose, which should be taken into account when calculating the total therapeutic dose that could increase the risk of a second cancer. The clinical implications of the combined radiation effect may require further investigation.

Clinical and Radiological Insights of Cleidocranial Dysplasia: A Case Report of a Rare Medical Condition.

Cleidocranial dysplasia (CCD) is a rare, congenital disorder characterized by a unique constellation of skeletal and dental abnormalities. The imaging findings, combined with clinical examination, help establish a definitive diagnosis. Understanding the broad spectrum of manifestations in CCD is essential for effective management and treatment. This case report aims to provide a comprehensive overview of a 25-year-old male patient with CCD, highlighting the genetic etiologies, clinical presentation, radiological findings, and a review of current literature to enhance understanding and awareness of this rare condition.

Impact of Preprocessing Parameters in Medical Imaging-Based Radiomic Studies: A Systematic Review.

BACKGROUND: Lately, radiomic studies featuring the development of a signature to use in prediction models in diagnosis or prognosis outcomes have been increasingly published. While the results are shown to be promising, these studies still have many pitfalls and limitations. One of the main issues of these studies is that radiomic features depend on how the images are preprocessed before their computation. Since, in widely known and used software for radiomic features calculation, it is possible to set these preprocessing parameters before the calculation of the radiomic feature, there are ongoing studies assessing the stability and repeatability of radiomic features to find the most suitable preprocessing parameters for every used imaging modality. MATERIALS AND METHODS: We performed a comprehensive literature search using four electronic databases: PubMed, Cochrane Library, Embase, and Scopus. Mesh terms and free text were modeled in search strategies for databases. The inclusion criteria were studies where preprocessing parameters' influence on feature values and model predictions was addressed. Records lacking information on image acquisition parameters were excluded, and any eligible studies with full-text versions were included in the review process, while conference proceedings and monographs were disregarded. We used the QUADAS-2 (Quality Assessment of Diagnostic Accuracy Studies 2) tool to investigate the risk of bias. We synthesized our data in a table divided by the imaging modalities subgroups. RESULTS: After applying the inclusion and exclusion criteria, we selected 43 works. This review examines the impact of preprocessing parameters on the reproducibility and reliability of radiomic features extracted from multimodality imaging (CT, MRI, CBCT, and PET/CT). Standardized preprocessing is crucial for consistent radiomic feature extraction. Key preprocessing steps include voxel resampling, normalization, and discretization, which influence feature robustness and reproducibility. In total, 44% of the included works studied the effects of an isotropic voxel resampling, and most studies opted to employ a discretization strategy. From 2021, several studies started selecting the best set of preprocessing parameters based on models' best performance. As for comparison metrics, ICC was the most used in MRI studies in 58% of the screened works. CONCLUSIONS: From our work, we highlighted the need to harmonize the use of preprocessing parameters and their values, especially in light of future studies of prospective studies, which are still lacking in the current literature.

Advantages of cone beam computed tomography for evaluation of subchondral insufficiency fractures of the knee compared to MRI.

To determine the diagnostic yield of cone beam computed tomography (CBCT) compared with 3 T magnetic resonance imaging (MRI) for the evaluation of subchondral insufficiency fractures of the knee. Consecutive patients with subchondral insufficiency fractures of the knee examined by 3 T MRI and CBCT of the femoral condyles were reviewed. Two experienced raters graded the lesion severity on 3 T MRI and CBCT images: grade 1: no signs of a subchondral bone lesion; grade 2: subchondral trabecular fracture or cystic changes, but without infraction of the subchondral bone plate; grade 3: collapse of the subchondral bone plate. Ratings were repeated after six weeks to determine reliability. In addition, the bone lesion size was measured as elliptical area (mm2) and compared between CBCT and T1-weighted MRI sequences. Among 30 patients included (43.3% women; mean age: 60.9 ± 12.8 years; body mass index (BMI) 29.0 ± 12.8 kg/m2), the medial femoral condyle was affected in 21/30 patients (70%). The grading of subchondral lesions between MRI and CBCT did not match in 12 cases (40%). Based on MRI images, an underestimation (i.e., undergrading) compared with CBCT was observed in nine cases (30%), whereas overgrading occurred in three cases (10%). Compared to CBCT, routine T1-weighted 3 T sequences significantly overestimated osseus defect zones in sagittal (84.7 ± 68.9 mm2 vs. 35.9 ± 38.2 mm2, p < 0.01, Cohen's d = 1.14) and coronal orientation (53.1 ± 24.0 mm2 vs. 22.0 ± 15.2 mm2, p < 0.01, Cohen's d = 1.23). The reproducibility of the grading determined by intra- and inter-rater agreement was very high in MRI (intra-class correlation coefficient (ICC) 0.78 and 0.90, respectively) and CBCT (ICC 0.96 and 0.96, respectively). In patients with subchondral insufficiency fractures of the knee, the use of CBCT revealed discrepancies in lesion grading compared with MRI. These findings are clinically relevant, as precise determination of subchondral bone plate integrity may influence the decision about conservative or surgical treatment. CBCT represents our imaging modality of choice for grading the lesion and assessing subchondral bone plate integrity. MRI remains the gold standard modality to detect especially early stages.

The Management of an Unusual Combination of Anomalies Following Primary Tooth Trauma: A Case Report.

The prognosis of luxation injuries of primary teeth is often unpredictable. A two-year-old girl presented with a displaced left primary maxillary anterior tooth diagnosed as severe intrusive luxation. On radiographic examination, it was noticed to be impinging on the underlying permanent tooth bud. The tooth was extracted, and periodic follow-ups were emphasized until the successor tooth erupted. However, after eight years, the patient followed up with a chief complaint of an unerupted permanent maxillary anterior tooth. Cone-beam computed tomography (CBCT) revealed a combination of anomalies in the crown and root of the maxillary anterior tooth. After a wait-and-observe regime for six months, the incisal third of the crown erupted. At eight years and eight months, the tooth developed a periapical abscess which was treated endodontically and restored. At nine years and three months, the tooth is asymptomatic till date. The present case report highlights the consequences of intrusive luxation injuries to the primary teeth and the need for a multidisciplinary team approach in the management of complications of dental trauma along with meticulous long-term follow-ups.

Hemisection: A Paradigm Shift in Prolonging Tooth Viability.

Splitting a molar means removing or separating the root and the accompanying crown portion. Hemisection of a damaged tooth aids in preserving the tooth structure and the existing alveolar bone surrounding the preserved root while also enabling the installation of a fixed prosthesis. This case report defines hemisection as an effective modality for preserving carious mandibular first molars with periodontal and periapical pathology.