Critical Shoulder Angle in Patients With Cuff Tears.

OBJECTIVE: The pathogenesis of rotator cuff tears (RCTs) is multifactorial. Critical shoulder angle (CSA), which represents the lateral extension of the acromion over the cuff, has been proposed as an extrinsic risk factor. The aim of the present systematic review and meta-analysis was to analyze the available literature regarding the correlation between RCT and CSA. METHODS: A review was carried out in accordance with the "Preferred Reporting Items for Systematic reviews and Meta-Analyses" guidelines on July 17, 2023, using the following databases: PubMed, Ovid, and Cochrane Reviews. The following keywords were used: "critical shoulder angle," "rotator cuff tears," and "rotator cuff lesions." The methodological quality of the studies was assessed with the MINORS SCORE. RESULTS: Twenty-eight studies were included. The average CSA among the 2110 patients with full-thickness RCT was 36.7 degrees, whereas the same value among the 2972 controls was 33.1 degrees. The average CSA in the 348 patients with partial-thickness RCT was 34.6 degrees, whereas it was 38.1 degrees in the 132 patients with massive RCT. The average MINORS score was 15.6. CONCLUSIONS: CSA values were significantly higher in patients with RCT compared with the asymptomatic population. In addition, it appears that CSA values increase with the severity of rotator cuff involvement.

Subacromial Surgery for Irreparable Posterosuperior Rotator Cuff Tears.

The irreparable posterosuperior rotator cuff tear describes a tear of the supraspinatus and/or infraspinatus tendon that is massive, contracted, and immobile in both the anterior-posterior and medial-lateral directions. Patients with an intact subscapularis and preserved forward elevation are challenging to treat because there is not a consensus treatment algorithm. For low-demand, elderly patients, several subacromial surgical options are available that can provide pain relief without the risks or burden of rehabilitation posed by reverse total shoulder arthroplasty or a complex soft-tissue reconstruction (e.g., superior capsular reconstruction, tendon transfer, bridging grafts). Debridement, more specifically the "smooth-and-move" procedure, offers a reliable outcome with documented improvements in pain and function at long-term follow-up. Similarly, the biodegradable subacromial balloon spacer (InSpace; Stryker, Kalamazoo, MI) has been shown to significantly improve pain and function in patients who are not responsive to nonoperative treatment. Disease progression with these options is possible, with a small percentage of patients progressing to rotator cuff arthropathy. Biologic tuberoplasty and bursal acromial reconstruction are conceptually similar to the balloon spacer but instead use biologic grafts to prevent bone-to-bone contact between the humeral head and the acromion. Although there is no single gold standard treatment, the variety of surgical techniques allows patients and surgeons to effectively manage these challenging situations.

The frequency of os acromiale in 751 shoulder MRI of Saudi population.

Background: Os acromiale (OA) is an uncommon pathology with a variable prevalence rate among different populations. Objectives: The aim of this study was to report the frequency of OA utilizing shoulder MRI of patients with shoulder pathology. Methods: It was a retrospective study. After obtaining our IRB approval, we gathered all shoulder and upper arm MRIs from the radiology department and evaluated them. Results: The prevalence of OA was found to be 3.32%. The mean age of the affected patients was 50.87 years (25-81). Conclusion: The rate of OA in patients presenting with shoulder pain is 3.32% in Saudi Arabia, which correlates with what has been previously reported in the literature.

Distribution and analysis of subacromial spurs and the relationship with acromial classification and angle in healthy individuals.

BACKGROUND: Subacromial spurs are considered the one of the pathology underlying shoulder impingement syndrome. Furthermore, few studies have focused on the morphology of the subacromial spurs in normal Chinese people. This study aimed to study the spur distribution and to illustrate the morphology of spurs, which may help guide the extent of acromioplasty. METHODS: A total of 93 normal individuals were enrolled, and both shoulders of all enrolled individuals were analyzed. The subjects were divided and classified into three different groups by ages: group I = 18-40 years, group II = 41-60 years, and group III ≥ 61 years. The osteophyte distribution, osteophyte area, subacromial surface area and osteophyte area/subacromial surface area ratio were measured and illustrated using Mimics and 3-matic software. The shape of the acromion was classified according to the Bigliani and Morrison classification system. The acromial angle was also classified. Then, the relationship between osteophytes, acromial classification and acromial angle was analyzed. RESULTS: Type II (curved shape) was the most common type of acromion, and the hooked shape was a rare form. A significant increase in the left subacromial surface area in males was observed in group III compared with group I (P < 0.001) and group II (P = 0.004). The total spur/subacromial area ratio was significantly higher in group II than I. An obvious increase in the right subacromial area was observed in group III compared with group I (P = 0.004). Furthermore, there was a significant increase in the right spur area (P = 0.021) and total spur/subacromial area ratio (P = 0.006) in females in group II compared with group I. Fewer spurs were observed on the left than on the right side (p = 0.0482). One spur was most common among type II acromions (29/36) (80.56%) on the left side and the right side (34/52, 65.38%). CONCLUSIONS: Spurs osteophytes are mainly distributed with an irregular shape and mostly run through the medial and lateral sides of the subacromial surface in normal subjects. The characteristics of subacromial spurs are so diverse that a surgeon must conduct subacromial decompression completely based on the morphology of individual spurs.

The Association between SLAP Lesions and Critical Shoulder Angle and Glenoid Depth.

PURPOSE OF THE STUDY: The critical shoulder angle (CSA) is formed by the combination of glenoid inclination and acromial index and has been shown related to rotator cuff tears and glenohumeral osteoarthritis. SLAP lesions today have an important place among bicipitolabral pathologies that cause intensive shoulder pain. We aimed to investigate the relationship between CSA and glenoid depth and SLAP lesions. MATERIAL AND METHODS: Between March 2017 and January 2022, 279 consecutive shoulder arthroscopy patients' MRI images were retrospectively examined. After the exclusion criteria, 191 patients were eligible. Patients with SLAP lesions (n=37) were assembled as the study group (Group 1), and patients with intact superior labrum (n=154) were named as the control group (Group 2). Critical shoulder angle (CSA) and glenoid depth measurements were performed using the preoperative MRI images. RESULTS: A total of 191 patients, of whom 84 were male (44%) were included. The mean age was 49.9±14.96 (range 18-79). There was a statistically signifi cant difference between the SLAP group (Group 1) and the control group (Group 2) in terms of CSA (p=0.032). The mean CSA was 31.66°±3.51° in Group 1 and 33.57° ±5.01° in Group 2. The cut-off value for CSA in patients with SLAP lesions was calculated as 32.85° and the area under the curve was 0.61, therefore a satisfactory association was observed between the groups. The mean glenoid depth was 4.32 ±1.25 mm in Group 1, and 4.39 ±0.32 mm in Group 2. There was no statistically signifi cant difference between the groups in terms of glenoid depth (p=0.136) and also no association between the glenoid depth and SLAP lesions was observed (cut-off=4.45 mm, AUC=0.32). CONCLUSIONS: Low CSA is associated with SLAP lesions, just as in glenohumeral osteoarthritis. Further prospective clinical studies are needed to enlighten the predisposing effect of CSA to SLAP lesions and the success of superior labral repairs. LEVEL OF EVIDENCE: Retrospective comparative study, Level III.

Clinical and radiological outcomes with an augmented baseplate for superior glenoid wear in reverse shoulder arthroplasty.

Aims: This study aimed to assess the impact of using the metal-augmented glenoid baseplate (AGB) on improving clinical and radiological outcomes, as well as reducing complications, in patients with superior glenoid wear undergoing reverse shoulder arthroplasty (RSA). Methods: From January 2016 to June 2021, out of 235 patients who underwent primary RSA, 24 received a superior-AGB after off-axis reaming (Group A). Subsequently, we conducted propensity score matching in a 1:3 ratio, considering sex, age, follow-up duration, and glenoid wear (superior-inclination and retroversion), and selected 72 well-balanced matched patients who received a standard glenoid baseplate (STB) after eccentric reaming (Group B). Superior-inclination, retroversion, and lateral humeral offset (LHO) were measured to assess preoperative glenoid wear and postoperative correction, as well as to identify any complications. Clinical outcomes were measured at each outpatient visit before and after surgery. Results: There were no significant differences in demographic data and preoperative characteristics between the two groups. Both groups showed significant improvements in patient-reported outcome measures (visual analogue scale for pain, visual analogue scale for function, American Shoulder and Elbow Surgeons, Constant, and Simple Shoulder Test scores) from preoperative to final assessment (p < 0.001). However, AGB showed no additional benefit. Notably, within range of motion, Group B showed significant postoperative decrease in both external rotation and internal rotation, unlike Group A (p = 0.028 and 0.003, respectively). Both groups demonstrated a significant correction of superior-inclination after surgery, while patients in Group B exhibited a significant decrease in LHO postoperatively (p = 0.001). Regarding complications, Group A experienced more acromial stress fractures (3 cases; 12.5%), whereas Group B had a higher occurrence of scapular notching (24 cases; 33.3%) (p = 0.008). Conclusion: Both eccentric reaming with STB and off-axis reaming with AGB are effective methods for addressing superior glenoid wear in RSA, leading to improved clinical outcomes. However, it is important to be aware of the potential risks associated with eccentric reaming, which include excessive bone loss leading to reduced rotation and scapular notching.

Robert H. Cofield, MD, Award for Best Oral Presentation 2023: Up to 8 mm of glenoid-sided lateralization does not increase the risk of acromial or scapular spine stress fracture following reverse shoulder arthroplasty with a 135° inlay humeral component.

BACKGROUND: Glenoid-sided lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of acromial or scapular spine fractures (ASFs). The purpose of this study was to assess if glenoid-sided lateralization even up to 8 mm increases the risk for stress fracture following RSA with a 135° inlay humeral component. METHODS: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. Varying amounts of glenoid lateralization were used from 0 to 8 mm. Preoperative radiographs were reviewed for the presence of acromial thinning, acromiohumeral distance (AHD), and inclination. Postoperative implant position (distalization, lateralization, and inclination) as well as the presence of ASF was evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on component and clinical variables to assess for factors predictive of ASF. RESULTS: Acromial or scapular spine fractures were identified in 26 of 470 shoulders (5.5%). Glenoid-sided lateralization was not associated with ASF risk (P = .890). Furthermore, the incidence of fracture did not vary based on glenoid-sided lateralization (0-2 mm, 7.4%; 4 mm, 5.6%; 6 mm, 4.4%; 8 mm, 6.0%; P > .05 for all comparisons). RSA on the dominant extremity was predictive of fracture (odds ratio [OR] 2.21, 95% confidence interval [CI] 1.20-5.75; P = .037), but there was no relationship between patient age, sex, preoperative acromial thinning, or diagnosis and risk of fracture. Although there was no difference in mean postoperative AHD between groups (P = .443), the pre- to postoperative delta AHD was higher in the stress fracture group (2.0 ± 0.7 cm vs. 1.7 ± 0.7 cm; P = .015). For every centimeter increase in delta AHD, there was a 121% increased risk for fracture (OR 2.21, 95% CI 1.33-3.68; P = .012). Additionally, for every 1-mm increase in inferior glenosphere overhang, there was a 19% increase in fracture risk (P = .025). CONCLUSION: Up to 8 mm of glenoid-sided metallic lateralization does not appear to increase the risk of ASF when combined with a 135° inlay humeral implant. Humeral distalization increases the risk of ASF, particularly when there is a larger change between pre- and postoperative AHD or higher inferior glenosphere overhang. In cases of pronounced preoperative superior humeral migration, it may be a consideration to avoid excessive postoperative distalization, but minimizing bony impingement via glenoid-sided lateralization appears to be safe.

Rotator Cuff Tears to Shoulder Instability: The Relationship Between Acromial Morphology and Shoulder Pathology.

¼ The acromion is a well-studied region of the scapula that has demonstrated substantial relationships to various shoulder pathologies.¼ Abnormal acromial morphology is associated with rotator cuff pathology, and our understanding of this risk factor inspired acromioplasty as an adjunctive treatment for rotator cuff tears.¼ The acromion is linked closely to shoulder kinematics and biomechanics, as it serves as the origin for the deltoid muscle.¼ In degenerative shoulder disease, eccentric glenohumeral osteoarthritis has been associated with a higher, flatter acromial roof.¼ Increasing literature is emerging connecting morphology of the acromion with shoulder instability.

Editorial Commentary: Lower Trapezius Transfer May Be Indicated for Surgical Management of Massive Irreparable Rotator Cuff Tears in Younger, Non-Arthritic Patients.

Although shoulder rotator cuff repair fixation constructs and suture anchor design have evolved, repair of massive or functionally irreparable tears historically has relied on tendon mobilization and compression, optimizing footprint biology, and attempting a tension-free repair. However, despite these efforts, rates of failure of complete healing may be high, ranging from 20% to 94%. This has led to a search for alternative approaches, including bridging grafts, subacromial balloons, superior capsular reconstructions, biologic tuberoplasties, bursal acromial grafts, and, ultimately, renewed interest in tendon transfers. The latissimus dorsi transfer was traditionally a preferred tendon-transfer technique for posterosuperior massive cuff tears, but inconsistent outcomes have resulted in declining popularity. Recently, the lower trapezius transfer (LTT) has gained acceptance for the treatment of posterosuperior tears, particularly with external rotation weakness and lag signs. The LTT is biomechanically superior to the latissimus dorsi transfer, offering a more native vector of pull and in-phase activation. LTT could be indicated for younger patients with massive cuff tears. However, LTT is relatively contraindicated in patients with cuff tear arthropathy; combined loss of elevation and external rotation; irreparable subscapularis tear; teres minor involvement; and/or those of advanced age or unable to comply with rigid rehabilitation guidelines.

In Vivo Analysis of Acromioclavicular Kinematics and Distance During Multiplanar Humeral Elevation.

BACKGROUND: Knowledge of acromioclavicular (AC) joint kinematics and distance may provide insight into the biomechanical function and development of new treatment methods. However, accurate data on in vivo AC kinematics and distance between the clavicle and acromion remain unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to investigate 3-dimensional AC kinematics and distance during arm elevation in abduction, scaption, and forward flexion in a healthy population. It was hypothesized that AC kinematics and distance would vary with the elevation angle and plane of the arm. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 19 shoulders of healthy participants were enrolled. AC kinematics and distance were investigated with a combined dual fluoroscopic imaging system and computed tomography. Rotation and translation of the AC joint were calculated. The AC distance was measured as the minimum distance between the medial border of the acromion and the articular surface of the distal clavicle (ASDC). The minimum distance point (MDP) ratio was defined as the length between the MDP and the posterior edge of the ASDC divided by the anterior-posterior length of the ASDC. AC kinematics and distance between different elevation planes and angles were compared. RESULTS: Progressive internal rotation, upward rotation, and posterior tilt of the AC joint were observed in all elevation planes. The scapula rotated more upward relative to the clavicle in abduction than in scaption (P = .002) and flexion (P = .005). The arm elevation angle significantly affected translation of the AC joint. The acromion translated more laterally and more posteriorly in scaption than in abduction (P < .001). The AC distance decreased from the initial position to 75° in all planes and was significantly greater in flexion (P < .001). The MDP ratio significantly increased with the elevation angle (P < .001). CONCLUSION: Progressive rotation and significant translation of the AC joint were observed in different elevation planes. The AC distance decreased with the elevation angle from the initial position to 75°. The minimum distance between the ASDC and the medial border of the acromion moved anteriorly as the shoulder elevation angle increased. CLINICAL RELEVANCE: These results could serve as benchmark data for future studies aiming to improve the surgical treatment of AC joint abnormalities to restore optimal function.

Acromion fractures after reverse shoulder arthroplasty occur in predictable clusters.

BACKGROUND: Acromion and scapular spine fractures (ASFs) following reverse total shoulder arthroplasty (RSA) have been reported at a rate of 3.9%. The location of the fracture has been shown to be an important factor in determining the outcomes of nonoperative treatment, with medial fractures having worse outcomes than lateral fractures. As the debate between operative and nonoperative treatment continues, a more precise understanding of the location of the fracture is necessary for effective management. The purpose of this study was to use 3-dimensional computed tomography (CT) reconstruction to characterize the exact location of ASFs after RSA. METHODS: A retrospective review of 2 separate institutional shoulder and elbow repositories was performed. Patients with post-RSA ASFs documented by post-fracture CT scans were included. The query identified 48 patients who sustained postoperative ASFs after RSA between July 2008 and September 2021. CT scans of patients with ASFs were segmented using Mimics software. Eight patients were excluded because of poor image quality. Each bone model was manipulated using 3-Matic Medical software to align the individual scapula with an idealized bone model to create a view of scapular fracture locations on a normalized bone model. This model was used to classify the fractures using the modified Levy classification. RESULTS: The study cohort consisted of 40 patients with a diagnosis of postoperative ASF after RSA. The median age at the time of surgery was 76 years (interquartile range, 73-79 years). The cohort comprised 32 women (80%) and 8 men (20%), with a median body mass index of 27.8. Only 10 patients (25%) had a previous diagnosis of osteoporosis and 6 (13%) had a diagnosis of inflammatory arthritis; 53% of patients underwent RSA owing to rotator cuff tear arthropathy. The distribution of fracture locations was similar within the cohort. However, lateral fractures were slightly more prevalent. The most common fracture location was the type I zone, with 12 fracture lines (29%). There were 11 fracture lines (26%) in the type IIa zone, 10 (23%) in the type IIb zone, 0 in the type IIc zone, and 9 (21%) in the type III zone. CONCLUSION: ASFs after RSA occur in 4 predictable clusters. No fractures appeared to distinctly cluster in the type IIc zone, which may not represent a true fracture zone. Understanding the distribution of these fractures will help to enable the future design of implants and devices to stabilize the fractures that require fixation.

Ipsilateral fractures of the acromion and coracoid processes of the scapula.

A fracture of the acromion and coracoid processes of scapula is rarely seen in the outpatient clinic, due to the acromion's anatomical position and shape, as well as the strong ligaments and muscles that are attached to it. These fractures are caused by either direct or indirect high-energy trauma injuries to the shoulder joint, leading to severe pain and a grossly restricted range of motion. Several acromial classifications were reported, but this type of longitudinal plane fracture of the acromion process in our case is yet to be described in the current literature. We present a rare combination of the coracoid process and unstable acromion bony projection fractures that have not previously been noted for this type of fracture. The closest to this is Kuhn's type III classification. A 51-year-old male presented to our emergency department complaining of the right shoulder pain and difficulty raising his arm following a 2-wheeler accident. The patient was managed by open reduction and internal fixation with 3 cannulated cancellous screws fixation and progressed well with no postoperative complications. He was asymptomatic postoperatively and regained full range of motion after 4 months.

Variability in the distance between the suprascapular notch with the spine of the scapulae and the acromion.

INTRODUCTION: The suprascapular notch lies in the superior border of the scapula and is a passageway for the suprascapular nerve that is sensory to the shoulder joint. Suprascapular nerve block involves injection of local anaesthetic into the suprascapular notch, either ultrasound guided or blind, using the spine of scapula and/or the medial border of the acromion as surface landmarks. AIM: To investigate the anatomic variations that exist between the distance of the notch from the spine of scapula and acromion. METHOD: Ninety-two dry scapulae were measured with a digital calliper for their length of the spine, distance between the midpoint of the spine and base of the suprascapular notch and distance between the medial border of the acromion and the base of the suprascapular notch. These measurements were compared for variations in the scapular bony landmarks, the spine and the acromion to determine the site for the injection. RESULTS: Measurement reliability was assessed by intraclass correlation, Cronbach's alpha being 0.99, 0.97 and 0.91 for length of spine, distance from spine and distance from acromion respectively. The distance from the acromion had less variation in measurement (3.73 ± 0.42 cm) but a flatter distribution when compared to distance from the spine of the scapula (3.32 ± 0.39 cm). CONCLUSION: Length of the spine of the scapula appeared not to influence either distance from the acromion or distance from the spine of scapula. There is potential for greater variability in placement of nerve blocks that use acromion as the bony reference. Key Points • Dry scapular measurement using electronic Vernier callipers is accurate (0.91-0.97). • There is potential for greater variability in placement of blind nerve blocks that use acromion as the bony reference to locate the suprascapular notch.

3D C-arm navigated acromioclavicular joint stabilization.

INTRODUCTION: Surgical treatment options for acromioclavicular joint separations are varied. Frequently, suspension devices (SD) are inserted for stabilization under arthroscopic view. This study investigates the feasibility and accuracy of three-dimensional (3D) digital-volume-tomography (DVT) C-arm navigated implantation with regard to the general trend toward increasingly minimally invasive procedures. MATERIALS AND METHODS: The implantation of a TightRope® suture button system (SD) via a navigated vertical drill channel through the clavicle and coracoid was investigated in 10 synthetic shoulder models with a mobile isocentric C-arm image intensifier setup in the usual parasagittal position. Thereby, in addition the placement of an additive horizontal suture cerclage via a navigated drill channel through the acromion was assessed. RESULTS: All vertical drill channels in the Coracoclavicular (CC) direction could be placed in a line centrally through the clavicle and the coracoid base. The horizontal drill channels in the Acromioclavicular (AC) direction ran strictly in the acromion, without affecting the AC joint or lateral clavicle. All SD could be well inserted and anchored. After tensioning and knotting of the system, the application of the horizontal AC cerclage was easily possible. The image quality was good and all relevant structures could be assessed well. CONCLUSION: Intraoperative 3D DVT imaging of the shoulder joint using a mobile isocentric C-arm in the usual parasagittal position to the patient is possible. Likewise, DVT navigated SD implantation at the AC joint in CC and AC direction on a synthetic shoulder model. By combining both methods, the application in vivo could be possible. Further clinical studies on feasibility and comparison with established methods should be performed.

Giant Cell Tumor of the Acromion: Case Report and Literature Review.

BACKGROUND/AIM: Giant cell tumor of bone (GCTB) is a locally aggressive neoplasm that typically occurs in the ends (epiphyses) of long bones of young adults. Flat bones are uncommon sites of involvement. Herein, we describe an unusual case of pathologically proven GCT of the acromion. CASE REPORT: The patient was a 39-year-old woman with no history of trauma who presented with a 3-month history of right posterior shoulder pain. Physical examination revealed mild swelling and tenderness in the posterior aspect of the right shoulder. Plain radiograph showed a purely lytic lesion, suggestive of a bone tumor. Computed tomography demonstrated an intraosseous lytic lesion with associated cortical thinning and lack of periosteal reaction. On magnetic resonance imaging, the lesion exhibited slightly higher signal intensity compared to skeletal muscle on T1-weighted sequences and heterogeneous high signal intensity on T2-weighted sequences. Strong enhancement was observed following gadolinium administration. The lesion was treated by extensive curettage with adjuvant therapy comprising ethanol and the remaining cavity was filled with polymethylmethacrylate bone cement. Histologically, the lesion was composed of round or spindle-shaped mononuclear cells admixed with numerous osteoclast-like giant cells. Immunohistochemically, the mononuclear neoplastic cells were diffusely positive for H3.3 G34W. The patient was asymptomatic and there was no evidence of local recurrence or distant metastasis 5 months after surgery. CONCLUSION: Although rare, acromial GCTB should be considered in the differential diagnosis of posterior shoulder pain, especially in young and early middle-aged adults.

Changes in the Lateral Acromion Angle in Rotator Cuff Tear Patients with Acromioplasty.

BACKGROUND: Arthroscopic surgery has been established as an efficacious intervention for the treatment of rotator cuff tears. The primary aim of this study was to analyze the modifications in the lateral acromial angle (LAA) subsequent to rotator cuff repair surgery using single-row rivet fixation and double-row rivet fixation techniques. Furthermore, we sought to investigate the influence of LAA on the prognosis of rotator cuff repair surgery. METHOD: This observational study retrospectively enrolled 105 patients diagnosed with degenerative rotator cuff tears who underwent arthroscopic rotator cuff repair between 2016 and 2019. Following the exclusion of two patients with subscapularis or superior labrum anterior and posterior (SLAP) tears, as well as three patients who were lost to follow-up, a cohort of 100 patients was included for clinical and imaging evaluation. Among these individuals, 50 were assigned to the double-row repair group, whereas the remaining 50 comprised the single-row repair group. Bilateral shoulder magnetic resonance imaging (MRI) scans were conducted no less than 24 months post-surgery. Experienced arthroscopic surgeons, blinded to the LAA measurements, assessed the rotator interval (RI) using a control MRI. Functional assessment was performed using the University of California, Los Angeles (UCLA) quick disability of the shoulder and arm, shoulder and hand (qDASH) score. The Wilcoxon signed-rank test for dependent samples was employed to compare data between the pre- and post-intervention groups. Pearson correlation coefficients were calculated to evaluate the relationship between different parameters. RESULTS: The study population consisted of 73 female patients and 27 male patients, with a mean age of 58.32 ± 5.29 years and a mean follow-up duration of 25.88 ± 8.11 months. Preoperatively, the mean LAA was 75.81° ± 11.28°, RI was 4.78 ± 0.62, UCLA score was 17.54 ± 2.44, and qDASH score was 2.45 ± 0.25. The average tear size was 8.95 ± 2.11 mm. A statistically significant difference in LAA was observed between the preoperative and postoperative measurements, with the double-row repair group exhibiting a greater LAA than the single-row repair group. Finally, a significant correlation was identified between LAA, RI, and qDASH scores after a 24-month follow-up period. CONCLUSION: According to our findings, the utilization of double-row rivet fixation has a greater LAA angle than single-row rivet fixation. Moreover, this preservation of LAA is significantly associated with the functional recovery of the shoulder joint.

Mitigating Fracture of the Acromion and Scapular Spine After Reverse Shoulder Arthroplasty: A Critical Analysis Review of Patient and Surgical Risk Factors.

LEVEL OF EVIDENCE: Level V. Narrative Review. See Instructions for Authors for a complete description of levels of evidence.

The role of bone morphology of the greater tuberosity and lateral acromion on subacromial space during scaption: a three-dimensional dynamic simulation analysis.

BACKGROUND: The bone morphology of the greater tuberosity and lateral acromion plays a central role in subacromial impingement syndrome. The critical shoulder angle (CSA) and greater tuberosity angle (GTA) are two-dimensional measurement parameters that have been validated to evaluate it radiologically. These markers are, however, static and don't consider the dynamic effect of glenohumeral motion. OBJECTIVES: This study aimed to better understand the biomechanics in subacromial impingement with a dynamic simulation based on a validated 3D biomechanical model coupling joint kinematics and 3D reconstructed computed tomography. STUDY DESIGN & METHODS: Sixty-one patients were included in this study: a case group of 44 patients with degenerative rotator cuff tears involving only the supraspinatus, and a control group of 17 without a rotator cuff tear. Patients with previous surgeries, traumatic cuff tears, and cuff tear arthropathy were excluded. CSA, GTA, and impingement-free range of motion (IF-ROM) of the glenohumeral joint in scaption were calculated. Correlation tests were used to determine the relationship between ROM and CSA, GTA, and combined CSA and GTA values. RESULTS: CSA and GTA were significantly higher in the rotator cuff tear group (p = 0.001 and < 0.001), while IF-ROM was significantly higher in the control group (p = 0.001). There was no overall correlation between CSA and GTA (R = 0.02, p = 0.8). Individual correlation between both angles with IF-ROM was negatively weak for CSA (R = -0.4, p < 0.001) and negatively moderate for GTA and IF-ROM (R = -0.5, p < 0.001). However, combining both angles resulted in a negatively high correlation with IF-ROM (R = -0.7, p < 0.001). CONCLUSION: Subacromial space narrowing during scaption is highly correlated to the cumulative values of GTA and CSA. These findings suggest that the combined bony morphology of the lateral acromion and greater tuberosity plays an important role in subacromial impingement. LEVEL OF EVIDENCE: III.

Deep learning for automated measurement of CSA related acromion morphological parameters on anteroposterior radiographs.

BACKGROUND: The Critical Shoulder Angle Related Acromion Morphological Parameter (CSA- RAMP) is a valuable tool in the analyzing the etiology of the rotator cuff tears (RCTs). However, its clinical application has been limited by the time-consuming and prone to inter- and intra-user variability of the measurement process. OBJECTIVES: To develop and validate a deep learning algorithm for fully automated assessment of shoulder anteroposterior radiographs associated with RCTs and calculation of CSA-RAMP. METHODS: Retrospective analysis was conducted on radiographs obtained from computed tomography (CT) scans and X-rays performed between 2018 and 2020 at our institution. The development of the system involved the utilization of digitally reconstructed radiographs (DRRs) generated from each CT scan. The system's performance was evaluated by comparing it with manual and semiautomated measurements on two separate test datasets: dataset I (DRRs) and dataset II (X-rays). Standard metrics, including mean average precision (AP), were utilized to assess the segmentation performance. Additionally, the consistency among fully automated, semiautomated, and manual measurements was comprehensively evaluated using the Pearson correlation coefficient and Bland-Altman analysis. RESULTS: A total of 1080 DRRs generated from 120 consecutive CT scans and 159 X-ray films were included in the study. The algorithm demonstrated excellent segmentation performance, with a mean AP of 57.67 and an AP50 of 94.31. Strong inter-group correlations were observed for all CSA-RAMP measurements in both test datasets I (automated versus manual, automated versus semiautomated, and semiautomated versus manual; r = [0.990---0.997], P < 0.001) and dataset II (r = [0.984---0.995], P < 0.001). Bland-Altman analysis revealed low bias for all CSA-RAMP measurements in both test datasets I and II, except for CD (with a maximum bias of 2.49%). CONCLUSIONS: We have successfully developed a fully automated algorithm capable of rapidly and accurately measuring CSA-RAMP on shoulder anteroposterior radiographs. A consistent automated CSA- RAMP measurement system may accelerate powerful and precise studies of disease biology in future large cohorts of RCTs patients.

Correlation of Acromial Morphology With Risk and Direction of Shoulder Instability: An MRI Study.

BACKGROUND: The influence of bony morphology on the development of posterior shoulder instability is not well known. PURPOSE: To determine if acromial morphology, as measured on magnetic resonance imaging (MRI), is associated with posterior or anterior shoulder instability. DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: MRI measurements of posterior acromial coverage (PAC), posterior acromial height (PAH), posterior acromial tilt (PAT), and anterior acromial coverage (AAC) were completed for 3 separate matched groups who underwent surgical intervention: posterior instability, anterior instability, and a comparison group of patients who underwent arthroscopic surgery for snapping scapula. Inclusion criteria were patients with recurrent instability <40 years of age without multidirectional instability, glenoid bone loss >13.5%, or glenoid retroversion >10%. RESULTS: Overall, 37 patients were included in each group. PAC was significantly less in the posterior instability group than in the anterior instability and comparison groups (68.3° vs 88.7° vs 81.7°; P < .001). PAH was significantly greater in the posterior group than in the anterior instability group (11.0 mm vs -0.1 mm; P < .001) and comparison group (0.7 mm; P < .001). There was no difference between the posterior and anterior groups in terms of PAT or AAC (P = .45 and P = .05, respectively). PAT was significantly smaller in the posterior instability group than the comparison group (55.2° vs 62.2°; P = .026). The anterior and comparison groups were not significantly different in PAH or PAT (P = .874 and P = .067, respectively) but were significantly different in AAC (P = .026). CONCLUSION: A higher and flatter posterior acromion, as measured on preoperative MRI, appears to be associated with patients who require arthroscopic capsulolabral repair due to posterior shoulder instability. This information may help clinicians to both diagnose and predict the need for operative intervention for patients with posterior labral tears.