RESUMEN
The human skin is exposed to various environmental factors including solar radiation and ambient air pollutants. Although, due to its physical and biological properties, the skin efficiently protects the body against the harm of environmental factors, their excessive levels and possible synergistic action may lead to harmful effects. Among particulate matter present in ambient air pollutants, PM2.5 is of particular importance for it can penetrate both disrupted and intact skin, causing adverse effects to skin tissue. Although certain components of PM2.5 can exhibit photochemical activity, only a limited amount of data regarding the interaction of PM2.5 with light and its effect on skin tissue are available. This study focused on light-induced toxicity in cultured human keratinocytes, which was mediated by PM2.5 obtained in different seasons. Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM) were employed to determine sizes of the particles. The ability of PM2.5 to photogenerate free radicals and singlet oxygen was studied using EPR spin-trapping and time-resolved singlet oxygen phosphorescence, respectively. Solar simulator with selected filters was used as light source for cell treatment to model environmental lightning conditions. Cytotoxicity of photoexcited PM2.5 was analyzed using MTT assay, PI staining and flow cytometry, and the apoptotic pathway was further examined using Caspase-3/7 assay and RT-PCR. Iodometric assay and JC-10 assay were used to investigate damage to cell lipids and mitochondria. Light-excited PM2.5 were found to generate free radicals and singlet oxygen in season-dependent manner. HaCaT cells containing PM2.5 and irradiated with UV-Vis exhibited oxidative stress features-increased peroxidation of intracellular lipids, decrease of mitochondrial membrane potential, enhanced expression of oxidative stress related genes and apoptotic cell death. The data indicate that sunlight can significantly increase PM2.5-mediated toxicity in skin cells.
Asunto(s)
Contaminantes Atmosféricos/efectos de la radiación , Contaminantes Atmosféricos/toxicidad , Células HaCaT/efectos de los fármacos , Luz/efectos adversos , Estrés Oxidativo/efectos de los fármacos , Material Particulado/efectos de la radiación , Material Particulado/toxicidad , Contaminantes Atmosféricos/química , Apoptosis/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Radicales Libres/metabolismo , Regulación de la Expresión Génica/efectos de los fármacos , Células HaCaT/metabolismo , Humanos , Peroxidación de Lípido/efectos de los fármacos , Potencial de la Membrana Mitocondrial/efectos de los fármacos , Estrés Oxidativo/genética , Estrés Oxidativo/efectos de la radiación , Tamaño de la Partícula , Material Particulado/química , Especies Reactivas de Oxígeno/metabolismo , Piel/efectos de los fármacos , Piel/metabolismo , Envejecimiento de la Piel/efectos de los fármacosRESUMEN
Bioaerosols have widely been a concern due to their potential harm to human health caused by the carrying and spreading of harmful microorganisms. Biofiltration has been generally used as a green and effective technology for processing VOCs. However, bioaerosols can be emitted into the atmosphere as secondary pollutants from the biofiltration process. This review presents an overview of bioaerosol emissions from gas bioreactors. The mechanism of bioaerosols production and the effect of biofiltration on bioaerosol emissions were analyzed. The results showed that the bioaerosol emission concentrations were generally exceeded 104 CFU m-3, which would damage to human health. Biomass, inlet gas velocity, moisture content, temperature, and some other factors have significant influences on bioaerosol emissions. Moreover, as a result of the analysis done herein, different inactivation technologies and microbial immobilization of bioaerosols were proposed and evaluated as a potential solution for reducing bioaerosols emissions. The purpose of this paper is to make more people realize the importance of controlling the emissions of bioaerosols in the biofiltration process and to make the treatment of VOCs by biotechnology more environmentally friendly. Additionally, the present work intends to increase people's awareness in regards to the control of bioaerosols, including microbial fragment present in bioaerosols.
Asunto(s)
Microbiología del Aire/normas , Contaminantes Atmosféricos/análisis , Contaminación del Aire/prevención & control , Reactores Biológicos/microbiología , Desinfección/métodos , Aerosoles , Contaminantes Atmosféricos/efectos de la radiación , Atmósfera/química , Biomasa , Tecnología Química Verde , Humanos , Peróxido de Hidrógeno/química , Oxidación-Reducción , Ozono/química , Rayos UltravioletaRESUMEN
It is essential and challenged to understand the atmospheric arsenic pollution because it is much more complicated than in water and top-soil. Herein the different behavior of arsenic species firstly were discovered within the ambient PM2.5 collected during daytime and nighttime, winter and summer. The diurnal variation of arsenic species in PMs is significantly correlated with the presence of metallic oxides, specifically, ferrous, titanium and zinc oxides, which might play a key role in the process of the photo-oxidation of As(III) to As(V) with the meteorological parameters and regional factors excluded. Subsequently, the photo conversion of arsenite was detected on metal-loaded glass-fiber filters under visible light. The photo-generated superoxide radical was found to be predominantly responsible for the oxidation of As(III). In order to reveal toxicity differences induced by oxidation As(III), HepG2 cells were exposed to various arsenic mixture solution. We found that the antioxidant enzyme activities suppressed with increasing the As(III)/As(V) ratio in total, followed by the accumulation of intracellular ROS level. The glucose consumption and glycogen content also displayed an obvious reduction in insulin-stimulated cells. Compared to the expression levels of IRS-1, AKT and GLUT4, GLUT2 might be more vulnerable to arsenic exposure and lead to the abnormalities of glucose metabolism in HepG2 cells. Taken together, these findings clarify that the health risk posed by inhalation exposure to As-pollution air might be alleviated owing to the photo-driven conversion in presence of metal oxides.
Asunto(s)
Contaminantes Atmosféricos/análisis , Arseniatos/análisis , Arsenitos/análisis , Glucosa/metabolismo , Luz , Metales Pesados/análisis , Material Particulado/análisis , Contaminantes Atmosféricos/efectos de la radiación , Contaminantes Atmosféricos/toxicidad , Arseniatos/efectos de la radiación , Arseniatos/toxicidad , Arsenitos/efectos de la radiación , Arsenitos/toxicidad , Células Hep G2 , Humanos , Exposición por Inhalación/análisis , Modelos Teóricos , Oxidación-Reducción , Estrés Oxidativo/efectos de los fármacos , Óxidos/análisis , Material Particulado/efectos de la radiación , Material Particulado/toxicidadRESUMEN
The reduction of ammonia emissions from air was experimentally investigated by advanced oxidation processes (AOPs) utilizing the combination of ultraviolet irradiation with ozone. The influence of operating conditions such as initial ammonia concentration and flow rate of gas on the reduction of ammonia concentration was investigated in homemade photochemical unit. The conversion of ammonia decreased with increasing initial concentration of ammonia and with increasing flow rate of air (decreasing retention time). The highest conversion of ammonia (97%) was achieved under lower initial concentration of ammonia (30 ppm) and lower flow rate of air (28 m3/h). The energy per order was evaluated for the advanced oxidation process too. The energy consumption was about 0.037 kWh/m3/order for the 97% ammonia conversion at 30 ppm of initial ammonia concentration and 28 m3/h flow rate of air. Based on the results, the advanced oxidation process combining the UV irradiation and ozone was effective for mitigation of ammonia concentration and presents a promising technology for the reduction of odor emissions from livestock buildings. Moreover, the AOPs are suitable for application for high flow rate of air, especially for ammonia abatement from livestock buildings, where very high efficiency is expected.
Asunto(s)
Contaminantes Atmosféricos/análisis , Amoníaco/análisis , Restauración y Remediación Ambiental/métodos , Ozono/química , Rayos Ultravioleta , Contaminantes Atmosféricos/química , Contaminantes Atmosféricos/efectos de la radiación , Amoníaco/química , Amoníaco/efectos de la radiación , Restauración y Remediación Ambiental/instrumentación , Peróxido de Hidrógeno/química , Oxidación-ReducciónRESUMEN
This study examined the use of high dosages of ultraviolet germicidal irradiation (UVGI) (253.7 nm) to deal with various concentrations of air pollutants, such as formaldehyde (HCHO), total volatile organic compounds (TVOC), under various conditions of humidity. A number of irradiation methods were applied for various durations in field studies to examine the efficiency of removing HCHO, TVOC, bacteria, and fungi. The removal efficiency of air pollutants (HCHO and bacteria) through long-term exposure to UVGI appears to increase with time. The effects on TVOC and fungi concentration were insignificant in the first week; however, improvements were observed in the second week. No differences were observed regarding the removal of HCHO and TVOC among the various irradiation methods in this study; however significant differences were observed in the removal of bacteria and fungi.
Asunto(s)
Microbiología del Aire , Contaminantes Atmosféricos/aislamiento & purificación , Contaminación del Aire Interior/prevención & control , Formaldehído/aislamiento & purificación , Compuestos Orgánicos Volátiles/aislamiento & purificación , Aerosoles , Contaminantes Atmosféricos/efectos de la radiación , Formaldehído/efectos de la radiación , Humedad , Fotólisis , Rayos Ultravioleta , Compuestos Orgánicos Volátiles/efectos de la radiaciónRESUMEN
The chemistry of oxidants and their precursors (oxidants*) plays a central role in outdoor environments but its importance in indoor air remains poorly understood. Ozone (O3) chemistry is important in some indoor environments and, until recently, ozone was thought to be the dominant oxidant indoors. There is now evidence that formation of the hydroxyl radical by photolysis of nitrous acid (HONO) and formaldehyde (HCHO) may be important indoors. In the past few years, high time-resolution measurements of oxidants* indoors have become more common and the importance of event-based release of oxidants* during activities such as cleaning has been proposed. Here we review the current understanding of oxidants* indoors, including drivers of the formation and loss of oxidants*, levels of oxidants* in indoor environments, and important directions for future research.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Radical Hidroxilo/análisis , Iluminación , Oxidantes , Fotólisis , Contaminantes Atmosféricos/efectos de la radiación , Formaldehído/análisis , Formaldehído/efectos de la radiación , Radical Hidroxilo/efectos de la radiación , Ácido Nitroso/análisis , Ácido Nitroso/efectos de la radiación , Ozono/análisis , Ozono/efectos de la radiaciónRESUMEN
TiO2 is employed as both photocatalytic and structural materials, leading to its applications in external coatings or in interior furnishing devices, including cement mortar, tiles, floorings, and glass supports. The authors have already demonstrated the efficiency of photoactive micro-sized TiO2 and here its industrial use is reported using the digital printing to coat porcelain grés slabs. Many advantages are immediately evident, namely rapid and precise deposition, no waste of raw materials, thus positively affecting the economy of the process. Data for the thin films deposited by digital printing were compared with those obtained for the conventional spray method. The use of metal-doped TiO2 is also reported so that the photoactivity of these materials can be exploited even under LED light. The digital inkjet printed coatings exhibited superior photocatalytic performance owing to both higher exposed surface area and greater volume of deposited anatase, as well as the greater areal distribution density of thinly and thickly coated regions. Moreover, the presence of TiO2 doped silver increased the efficiency of the materials in NOx degradation both under UVA and LED lights.
Asunto(s)
Contaminación del Aire Interior/prevención & control , Materiales de Construcción , Nanopartículas/química , Plata/química , Titanio/química , Rayos Ultravioleta , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/efectos de la radiación , Catálisis , Óxidos de Nitrógeno/análisis , Óxidos de Nitrógeno/efectos de la radiación , Impresión Tridimensional , Propiedades de SuperficieRESUMEN
The photochemical removal of acetaldehyde was studied in N2 or air (O2 1-20%) at atmospheric pressure using side-on and head-on types of 172 nm Xe2 excimer lamps. When CH3CHO was decomposed in N2 using the head-on lamp (HL), CH4, CO, and CO2 were observed as products in FTIR spectra. The initial removal rate of CH3CHO in N2 was ascertained as 0.37 min-1. In air (1-20% O2), HCHO, HCOOH, CO, and CO2 were observed as products in FTIR spectra. The removal rate of CH3CHO in air using the side-on lamp (SL) increased from 3.2 to 18.6 min-1 with decreasing O2 concentration from 20 to 1%. It also increased from 2.5 to 3.7 min-1 with increasing CH3CHO concentration from 150 to 1000 ppm at 20% O2. The best energy efficiency of the CH3CHO removal using the SL in a flow system was 2.8 g/kWh at 1% O2. Results show that the contribution of O(1D) and O3 is insignificant in the initial decomposition of CH3CHO. It was inferred that CH3CHO is initially decomposed by the O(3P) + CH3CHO reaction at 5-20% O2, whereas the contribution of direct vacuum ultraviolet (VUV) photolysis increases concomitantly with decreasing O2 pressure at < 5% O2. After initial decomposition of CH3CHO, it was oxidized further by reactions of O(3P), OH, and O3 with various intermediates such as HCHO, HCOOH, and CO, leading to CO2 as a final product.
Asunto(s)
Acetaldehído/análisis , Contaminantes Atmosféricos/análisis , Nitrógeno/química , Fotólisis , Rayos Ultravioleta , Compuestos Orgánicos Volátiles/análisis , Acetaldehído/efectos de la radiación , Contaminantes Atmosféricos/efectos de la radiación , Presión Atmosférica , Oxidación-Reducción , Vacio , Compuestos Orgánicos Volátiles/efectos de la radiaciónRESUMEN
Airborne bacteria-containing bioaerosols have attracted increased research attention on account of their adverse effects on human health. Ultraviolet germicidal irradiation (UVGI) is an effective method to inactivate airborne microorganisms. The present study models and compares the inactivation performance of three UV sources in the UVGI for aerosolized Escherichia coli. Inactivation efficiency of 0.5, 2.2 and 3.1 logarithmic order was obtained at an exposure UV dose of 370â¯J/m3 under UVA (365â¯nm), UVC (254â¯nm) and UVD (185â¯nm) sources, respectively. A Beer-Lambert law-based model was developed and validated to compare the inactivation performances of the UV sources, and modeling enabled prediction of inactivation efficiency and analysis of the sensitivity of several parameters. Low influent E. coli concentrations and high UV doses resulted in high energy consumption (EC). The change in airborne endotoxin concentration during UV inactivation was analyzed, and UVC and UVA irradiation showed no marked effect on endotoxin degradation. By contrast, both free and bound endotoxins could be removed by UVD treatment, which is attributed to the ozone generated by the UVD source. The results of this study can provide a better understanding of the air disinfection and airborne endotoxin removal processes.
Asunto(s)
Microbiología del Aire , Contaminantes Atmosféricos/análisis , Desinfección/métodos , Endotoxinas/análisis , Escherichia coli/efectos de la radiación , Modelos Teóricos , Rayos Ultravioleta , Contaminantes Atmosféricos/efectos de la radiación , Desinfección/economía , Desinfección/instrumentación , Endotoxinas/efectos de la radiación , Exposición por Inhalación/prevención & control , Ozono/análisis , Rayos Ultravioleta/clasificaciónRESUMEN
The present experimental study describes the characteristics of polycyclic aromatic hydrocarbons (PAHs) emitted with PM2.5 particles during wood and rice straw burning as well as impacts of photochemical ageing on the half lives of particulate PAHs and their diagnostic ratio values. The photochemical degradation kinetics experiments were carried out by exposing the PM2.5 to light and synthetic air flow. Pseudo first order rate constants were calculated based on PAH loss as a function of exposure time. Relatively quick degradation of lighter PAHs (3-rings) [(0.2-0.5)h-1] than heavier PAHs (4-6 rings) [(0.0005-0.03)h-1] indicates substantial impact of PAH-substrate interaction through π-π stacking with the carbonaceous substrates. Moreover, our results showed distinct PAH diagnostic ratios (DR) for wood and rice straw burnings which, however, change with time due to photochemical degradation. The later may add uncertainties in the applications of DR values for source apportionment. Furthermore, considerably large half lives (100-3000 h) of the carcinogenic PAHs as estimated under ambient solar radiation may cause poor and adverse air quality in long range and therefore demands immediate regulations against uncontrolled biomass burning.
Asunto(s)
Agricultura/métodos , Contaminantes Atmosféricos/efectos de la radiación , Luz , Oryza , Material Particulado/efectos de la radiación , Hidrocarburos Policíclicos Aromáticos/efectos de la radiación , Madera , Adsorción , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/química , Biomasa , Incendios , Semivida , India , Material Particulado/análisis , Material Particulado/química , Procesos Fotoquímicos , Hidrocarburos Policíclicos Aromáticos/análisis , Hidrocarburos Policíclicos Aromáticos/químicaRESUMEN
Heterogeneous photocatalytic oxidation (PCO) is a widely studied alternative for the elimination of volatile organic compounds (VOC) in air. In this context, research on novel photoreactor arrangements to enhance PCO rates is desired. Annular fluidized bed photoreactors (AFBPR) have yielded prominent results when compared to conventional thin film reactors. However, very few works aimed at optimizing AFBPR operation. In this study, TiO2 photocalytic agglomerates were synthesized and segregated in specific size distributions to behave as Geldart groups A, B, C, and D fluidization. The TiO2 agglomerates were characterized by XRD, FTIR spectra, and N2 adsorption. Photocatalyst performances were compared in a 10-mm gapped AFBPR for degrading the model pollutant methyl-ethyl-ketone (MEK), using a 254-nm radiation source. Geldart group C showed to be inadequate for AFBPR operation due to the short operation range between fluidization and elutriation. In all the cases, photocatalytic reaction rates were superior to sole UV photolysis. Group A and group B demonstrated the highest reaction rates. Considerations based on mass transfer suggested that the reasons were enhanced UV distribution within the bed at lower flow rates and superior catalyst surface area at higher flow rates. Results also revealed that groups A, B, and D perform equally per catalyst area within an AFBPR if the fluidization numbers (FN) are high enough.
Asunto(s)
Contaminantes Atmosféricos/análisis , Butanonas/análisis , Fotólisis , Titanio/química , Compuestos Orgánicos Volátiles/análisis , Adsorción , Contaminantes Atmosféricos/efectos de la radiación , Butanonas/efectos de la radiación , Catálisis , Modelos Teóricos , Oxidación-Reducción , Compuestos Orgánicos Volátiles/efectos de la radiaciónRESUMEN
The plasma electrolytic oxidation (PEO) technique was used to prepare photocatalytic S-TiO2 coatings on Ti sheets; the incorporation of the S ions was possible from the electrolyte for modifying the structural and optics characteristics of the material. In this work, substrates of Ti (ASME SB-265 of 20 × 20 × 1 mm) were used in a PEO process in 10 min, using constant voltage pulses of 340 V with frequency of 1 kHz and duty cycles of 10% and of 30%. Solutions with H2SO4 (0.1 M) and CH4N2S (52 and 79 mM) were used as electrolytes. X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy (EDS) were utilized to analyze the surface morphology, crystalline phase, and chemical composition of the samples. According to the results, the catalyst coatings had microporous structure and contained anatase-rutile TiO2 nanocrystalline mixture, until 73.2% rutile and 26.8% anatase in the samples grown with 30% duty cycle and the lowest concentration of CH4N2S. From the EDS measurements, the incorporation of sulfur ions to the coatings was 0.08 wt%. 99.5% reduction efficiency of Cr(VI)-EDTA with sunlight was observed after 2 h; it was determined by diphenyl carbazide spectrophotometric method. These coatings have potential for effective sunlight heterogeneous photoreduction of this toxic, cumulative, and non-biodegradable heavy metal that contaminates the soil and water and is a serious risk to sustainability, ecosystems, and human health.
Asunto(s)
Contaminantes Atmosféricos/análisis , Cromo/análisis , Ácido Edético/química , Azufre/química , Luz Solar , Titanio/química , Contaminantes Atmosféricos/efectos de la radiación , Catálisis , Cromo/efectos de la radiación , Electrólitos/química , Oxidación-Reducción , Gases em Plasma/química , Porosidad , Propiedades de SuperficieRESUMEN
Atmospheric methane is rapidly lost when it enters humid subterranean critical and vadose zones (e.g., air in soils and caves). Because methane is a source of carbon and energy, it can be consumed by methanotrophic methane-oxidizing bacteria. As an additional subterranean sink, it has been hypothesized that methane is oxidized by natural radioactivity-induced radiolysis that produces energetic ions and radicals, which then trigger abiotic oxidation and consumption of methane within a few hours. Using controlled laboratory experiments, we tested whether radiolysis could rapidly oxidize methane in sealed air with different relative humidities while being exposed to elevated levels of radiation (more than 535 kBq m-3) from radon isotopes 222Rn and 220Rn (i.e., thoron). We found no evidence that radiolysis contributed to methane oxidation. In contrast, we observed the rapid loss of methane when moist soil was added to the same apparatus in the absence of elevated radon abundance. Together, our findings are consistent with the view that methane oxidizing bacteria are responsible for the widespread observations of methane depletion in subterranean environments. Further studies are needed on the ability of microbes to consume trace amounts of methane in poorly ventilated caves, even though the trophic and energetic benefits become marginal at very low partial pressures of methane.
Asunto(s)
Aire/análisis , Cuevas/química , Metano/efectos de la radiación , Radiactividad , Suelo/química , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/metabolismo , Contaminantes Atmosféricos/efectos de la radiación , Monitoreo del Ambiente , Metano/análisis , Metano/metabolismo , Oxidación-Reducción/efectos de la radiación , Factores de TiempoRESUMEN
The present study investigates the influence of calcination temperature on the properties and photoactivity of multi-element doped TiO2. The photocatalysts were prepared by incorporating silver (Ag), fluorine (F), nitrogen (N), and tungsten (W) into the TiO2 structure via the sol-gel method. Spectroscopic techniques were used to elucidate the correlation between the structural and optical properties of the doped photocatalyst and its photoactivity. XRD results showed that the mean crystallite size increased for undoped photocatalysts and decreased for the doped photocatalysts when calcination was done at higher temperatures. UV-Vis spectra showed that the absorption cut-off wavelength shifted towards the visible light region for the as-synthesized photocatalysts and band gap narrowing was attributed to multi-element doping and calcination. FTIR spectra results showed the shifting of OH-bending absorption bands towards increasing wave numbers. The activity of the photocatalysts was evaluated in terms of gaseous formaldehyde removal under visible light irradiation. The highest photocatalytic removal of gaseous formaldehyde was found at 88%. The study confirms the effectiveness of multi-element doped TiO2 to remove gaseous formaldehyde in air by visible light photocatalysis and the results have a lot of potential to extend the application to other organic air contaminants.
Asunto(s)
Contaminantes Atmosféricos/análisis , Formaldehído/análisis , Luz , Titanio/química , Compuestos Orgánicos Volátiles/análisis , Contaminantes Atmosféricos/efectos de la radiación , Contaminación del Aire Interior/análisis , Contaminación del Aire Interior/prevención & control , Catálisis , Formaldehído/efectos de la radiación , Calor , Oxidación-Reducción , Propiedades de Superficie , Compuestos Orgánicos Volátiles/efectos de la radiaciónRESUMEN
The photochemical reaction between biphenyl (Bp) and N(III) under irradiation at 365 nm UV light was investigated. The results showed that Bp conversion efficiency was strongly influenced by N (III) concentration, Bp initial concentration and pH. Species-specific rate constants determined by reaction of Bp with H2ONO+ (k1), HONO (k2) and NO2- (k3) were k1 = (0.058 ± 0.005 L mol-1 s-1), k2 = (0.12 ± 0.06 L mol-1 s-1) and k3 = (0.0019 ± 0.0003 L mol-1 s-1), respectively. Laser flash photolysis studies confirmed that OH radical deriving from the photolysis of N(III) attacked aromatic ring to form Bp-OH adduct with a rate constant of 9.4 × 109 L mol-1 s-1. The products analysis suggested that Bp-OH adduct could be nitrated by N (III) and NO2 to generate nitro-compounds.
Asunto(s)
Contaminantes Atmosféricos/química , Compuestos de Bifenilo/química , Ácido Nitroso/química , Rayos Ultravioleta , Agua/química , Aerosoles , Contaminantes Atmosféricos/efectos de la radiación , Compuestos de Bifenilo/efectos de la radiación , Radical Hidroxilo/química , Rayos Láser , Ácido Nitroso/efectos de la radiación , Oxidación-Reducción , Procesos Fotoquímicos , FotólisisRESUMEN
Singlet and triplet potential energy surfaces for the atmospheric ozonation of trans-2-chlorovnyldichloroarsine (lewisite) are investigated theoretically. Optimizations of the reactants, products, intermediates and transition states are carried out at the BHandHLYP/6-311+G(d,p) level. Single point energy calculations are performed at the CCSD(T)/6-311+G(d,p) level based on the optimized structures. The detailed mechanism is presented and discussed. Various possible H (or Cl)-abstraction and C (or As)-addition/elimination pathways are considered. The results show that the As-addition/elimination is more energetically favorable than the other mechanisms. Rice-Ramsperger-Kassel-Marcus (RRKM) theory is used to compute the rate constants over the possible atmospheric temperature range of 200-3000 K and the pressure range of 10(-8)-10(9) Torr. The calculated rate constant is in good agreement with the available experimental data. The total rate coefficient shows positive temperature dependence and pressure independence. The modified three-parameter Arrhenius expressions for the total rate coefficient and individual rate coefficients are represented. Calculation results show that major product is CHClCHAs(OOO)Cl2 (s-IM3) at the temperature below 600 K and O2 + CHClCHAsOCl2 (s-P9) play an important role at the temperature between 600 and 3000 K. Time-dependent DFT (TD-DFT) calculations indicate that CHCl(OOO)CHAsCl2 (s-IM3) and CHOAsCl2 (s-P5) can take photolysis easily in the sunlight. Due to the absence of spectral information for arsenide, computational vibrational spectra of the important intermediates and products are also analyzed to provide valuable evidence for subsequent experimental identification.
Asunto(s)
Contaminantes Atmosféricos/análisis , Arsenicales/análisis , Sustancias para la Guerra Química/análisis , Modelos Teóricos , Ozono/química , Contaminantes Atmosféricos/química , Contaminantes Atmosféricos/efectos de la radiación , Arsenicales/química , Arsenicales/efectos de la radiación , Sustancias para la Guerra Química/química , Sustancias para la Guerra Química/efectos de la radiación , Cinética , Fotólisis , Presión , TemperaturaRESUMEN
Portable photocatalytic air cleaners were investigated in 24 and 48 m(3) emission test chambers with regard to efficiency and by-product generation. For this purpose, formaldehyde, decane, 1,2-dichlorobenzene, toluene, α-pinene and heptanal were doped at sub-ppm concentration levels into the chambers individually and in mixtures. By way of specified test protocols, efficiencies could be distinguished but were strongly dependant on the choice of test compounds, especially on whether single or multi compound dosing was used, and on long-term effects. Initial clean air delivery rates (CADRs) up to 137 m(3)/h were measured. Typical by-products were found in significant concentrations. The main ones were formaldehyde up to 50 ppb (62 µg/m(3)) and acetone up to 80 ppb (190 µg/m(3)). Other aldehydes were also found, but at smaller levels. The detection of chloroacetone, a strong irritating compound, at concentrations up to 15 ppb (57 µg/m(3)) strengthens the importance of such investigations especially in cases were chloro-organic compounds are involved.
Asunto(s)
Acetona/análogos & derivados , Aire Acondicionado/métodos , Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Formaldehído/análisis , Rayos Ultravioleta , Acetona/análisis , Acetona/efectos de la radiación , Aire Acondicionado/instrumentación , Contaminantes Atmosféricos/efectos de la radiación , Aldehídos/análisis , Aldehídos/efectos de la radiación , Monoterpenos Bicíclicos , Catálisis , Clorobencenos/análisis , Clorobencenos/efectos de la radiación , Formaldehído/efectos de la radiación , Monoterpenos/análisis , Monoterpenos/efectos de la radiaciónRESUMEN
We tested the toxicity of thirdhand smoke (THS) using two controlled laboratory exposure scenarios and low levels of THS. One exposure modeled THS in a car parked outdoors, while the second modeled THS in a room without sunlight. The fabrics were exposed to cigarette smoke and then extracted in culture medium. Concentrations of nicotine, nicotine related alkaloids, and tobacco specific nitrosamines (TSNAs) were determined in fresh and aged extracts. The concentration of TSNAs increased with aging in the indoor experiment. THS extracts were used for cytotoxicity testing using mouse neural stem cells (mNSC), human dermal fibroblasts (hDF) and human palatal mesenchyme cells (hPM). Extracts from the car experiment inhibited mNSC proliferation in a live cell imaging assay and induced single strand DNA breaks in mNSC and hDF. In the indoor experiment, THS extracts made with medium containing serum proteins were significantly more toxic than extracts made with basal medium, and mNSC and hPM were more sensitive than hDF. These data indicate that: (1) aging of THS chemical differs on different fabrics and differs with and without sunlight; (2) very few cigarettes are sufficient to produce a toxic THS residue; and (3) protein enhances the efficiency of extraction of cytotoxic chemicals.
Asunto(s)
Contaminantes Atmosféricos/toxicidad , Contaminación del Aire Interior/efectos adversos , Textiles , Contaminación por Humo de Tabaco/efectos adversos , Contaminantes Atmosféricos/efectos de la radiación , Alcaloides/análisis , Animales , Automóviles , Células Cultivadas , Daño del ADN , Femenino , Fibroblastos/efectos de los fármacos , Humanos , Células Madre Mesenquimatosas/efectos de los fármacos , Ratones , Persona de Mediana Edad , Células-Madre Neurales/efectos de los fármacos , Nitrosaminas/análisis , Luz Solar , Textiles/análisisRESUMEN
It is important to develop efficient and economic techniques for removing volatile organic compounds (VOCs) in indoor air. Heterogeneous TiO2-based semiconductors are a promising technology for achieving this goal. Anatase/brookite/rutile tricrystalline TiO2 with mesoporous structure was synthesized by a low-temperature hydrothermal route in the presence of HNO3. The obtained samples were characterized by X-ray diffraction and N2 adsorption-desorption isotherm. The photocatalytic activity was evaluated by photocatalytic decomposition of toluene in air under UV light illumination. The results show that tricrystalline TiO2 exhibited higher photocatalytic activity and durability toward gaseous toluene than bicrystalline TiO2, due to the synergistic effects of high surface area, uniform mesoporous structure and junctions among mixed phases. The tricrystalline TiO2 prepared at RHNO3=0.8, containing 80.7% anatase, 15.6% brookite and 3.7% rutile, exhibited the highest photocatalytic activity, about 3.85-fold higher than that of P25. The high activity did not significantly degrade even after five reuse cycles. In conclusion, it is expected that our study regarding gas-phase degradation of toluene over tricrystalline TiO2 will enrich the chemistry of the TiO2-based materials as photocatalysts for environmental remediation and stimulate further research interest on this intriguing topic.
Asunto(s)
Contaminantes Atmosféricos/aislamiento & purificación , Contaminación del Aire Interior/análisis , Titanio/química , Compuestos Orgánicos Volátiles/aislamiento & purificación , Contaminantes Atmosféricos/efectos de la radiación , Catálisis , Cristalización , Restauración y Remediación Ambiental , Oxidación-Reducción , Procesos Fotoquímicos , Tolueno/aislamiento & purificación , Rayos Ultravioleta , Compuestos Orgánicos Volátiles/efectos de la radiaciónRESUMEN
Abatement of fluorinated compounds (FCs) used in semiconductor and display industries has received an attention due to the increasingly stricter regulation on their emission. We have developed a 2.45GHz microwave plasma torch with reverse vortex reactor (RVR). In order to design a reverse vortex plasma reactor, we calculated a volume fraction and temperature distribution of discharge gas and waste gas in RVR by ANSYS CFX of computational fluid dynamics (CFD) simulation code. Abatement experiments have been performed with respect to SF6, NF3 by varying plasma power and N2 flow rates, and FCs concentration. Detailed experiments were conducted on the abatement of NF3 and SF6 in terms of destruction and removal efficiency (DRE) using Fourier transform infrared (FTIR). The DRE of 99.9% for NF3 was achieved without an additive gas at the N2 flow rate of 150 liter per minute (L/min) by applying a microwave power of 6kW with RVR. Also, a DRE of SF6 was 99.99% at the N2 flow rate of 60 L/min using an applied microwave power of 6kW. The performance of reverse vortex reactor increased about 43% of NF3 and 29% of SF6 abatements results definition by decomposition energy per liter more than conventional vortex reactor.