Accuracy and efficiency of dynamic navigated root-end resection in endodontic surgery: a pilot in vitro study.

BACKGROUND: The operation accuracy and efficiency of dynamic navigated endodontic surgery were evaluated through in vitro experiments. This study provides a reference for future clinical application of dynamic navigation systems in endodontic surgery. MATERIALS AND METHODS: 3D-printed maxillary anterior teeth were used in the preparation of models for endodontic surgery. Endodontic surgery was performed with and without dynamic navigation by an operator who was proficient in dynamic navigation technology but had no experience in endodontic surgery. Optical scanning data were applied to evaluate the length and angle deviations of root-end resection. And the operation time was recorded. T tests were used to analyze the effect of dynamic navigation technology on the accuracy and duration of endodontic surgery. RESULTS: With dynamic navigation, the root-end resection length deviation was 0.46 ± 0.06 mm, the angle deviation was 2.45 ± 0.96°, and the operation time was 187 ± 22.97 s. Without dynamic navigation, the root-end resection length deviation was 1.20 ± 0.92 mm, the angle deviation was 16.20 ± 9.59°, and the operation time was 247 ± 61.47 s. Less deviation was achieved and less operation time was spent with than without dynamic navigation (P < 0.01). CONCLUSION: The application of a dynamic navigation system in endodontic surgery can improve the accuracy and efficiency significantly for operators without surgical experience and reduce the operation time.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Endodontic Microsurgery With an Autonomous Robotic System: A Clinical Report.

INTRODUCTION: Endodontic microsurgery (EMS) requires minimally invasive osteotomy and accurate root-end resection, which can be challenging in many instances. Evidence suggests that autonomous robotic systems can significantly enhance the precision of dental implantation. The aim of this case report is to introduce a novel EMS technique that employs robot-guided osteotomy and root resection procedures. METHODS: A 59-year-old man was diagnosed with previously treated, symptomatic apical periodontitis in the mandibular left first molar. Patient data were used to integrate a digital model into preoperative planning software to design the surgical plan. The robotic system utilizes spatial alignment techniques for registration, guiding the robotic arm to autonomously perform a 3-mm osteotomy and root-end resection, based on the surgical plan. After completing the resection, the clinician confirmed the absence of cracks or root fractures and subsequently performed root-end preparation and filling under a microscope. RESULTS: To the best of our knowledge, this case marks the first use of autonomous robotic assistance in EMS. CONCLUSIONS: Utilizing an autonomous robotic system could enable precise apicoectomy in patients with intact cortical plates, thus facilitating successful EMS procedures. This has the potential to minimize errors caused by operator inexperience and mitigate the risks associated with excessive bone removal.

Clinical outcomes of endodontic microsurgery in complicated cases with large or through-and-through lesions: a retrospective longitudinal study.

OBJECTIVES: To investigate the clinical outcomes of endodontic microsurgery in complicated cases presenting with large or through-and-through lesions. MATERIALS AND METHODS: We retrospectively collected and analyzed preoperative, intraoperative, and follow-up data from 143 complicated cases that underwent endodontic microsurgery. Clinical outcomes were assessed in terms of tooth survival and surgery success. Cox regression analysis was used to evaluate the survival rate and identify associated risk factors. Additionally, the success rate was compared across different postoperative periods, and potential factors contributing to surgical failure were identified through binary logistic regression. RESULTS: The overall survival and success rates were 93.0% and 91.7%, respectively. The Cox regression model identified four risk factors affecting tooth survival, including apicoectomy of four teeth (HR = 35.488; P = 0.0002), an open apex observed on preoperative radiographs (HR = 6.300; P = 0.025), the performance of guided tissue regeneration technique (HR = 8.846; P = 0.028), and a palatal surgical approach (HR = 8.685; P = 0.030). The success rate demonstrated an initial increase in the early postoperative period (from 0.5 to 2 years; P = 5.8124e-30), followed by stabilization (from 2 to 9 years; P = 0.298). Surgery success rate significantly declined when apicoectomy involved four teeth (OR = 109.412; P = 0.002). CONCLUSIONS: Endodontic microsurgery demonstrates satisfactory outcomes in complicated cases, maintaining a stable success rate after two years. However, tooth survival and surgery success are significantly compromised when apicoectomy involves four teeth. Factors such as guided tissue regeneration, an open apex, and the palatal surgical approach are associated with an increased risk of tooth extraction. CLINICAL RELEVANCE: Despite achieving acceptable outcomes in complicated cases, endodontic microsurgery is adversely affected by the apicoectomy of four teeth.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth.

BACKGROUND: High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods. MATERIALS AND METHODS: Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery. RESULTS: The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff. CONCLUSIONS: The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Dynamically guided transantral piezoelectric endodontic microsurgery: A case report with technical considerations.

AIM: Endodontic microsurgery (EMS) of maxillary molars may represent a complex challenge to the clinician due to the location of the roots and the proximity of the maxillary sinus floor. This report aimed to describe the simultaneous use of a computer-assisted dynamic navigation (C-ADN) system and piezoelectric bony-window osteotomy for the transantral microsurgical approach of a maxillary left first molar with adequate root canal filling and symptomatic apical periodontitis. SUMMARY: This case report highlights the importance of C-ADN to carry out a minimally invasive buccal surgical access to palatal roots affected by apical periodontitis and provides a practical example to help clinicians make treatment decisions based on the available evidence. Clinical and tomographic evaluations were performed before the surgical procedure and at 24-month follow-up. This case was treated using a C-ADN system fitted to a piezotome for the buccal approach of the buccal roots, maxillary sinus membrane lifting, and for transantral location, root-end resection, cavity preparation, and filling of the palatal root. The navigation system allowed to achieve an accurate apical canal terminus location and root-end filling of the three roots with a minimally invasive piezoelectric crypt approach. At the 24-month follow-up examination, the patient remains asymptomatic, with normal periapical structures, and regeneration of maxillary sinus walls. It was concluded that the combination of dynamic navigation with piezoelectric bony-window osteotomy offers enhanced accuracy, tissue preservation, diminished risk of iatrogenic complications, and could maximize success and survival rates in transantral EMS.

Prevalencia de cristales de colesterol en granulomas perirradiculares de origen endodóntico / Prevalence of cholesterol crystals in periradicular granulomas of endodontic origin

Objetivos: Identificar y determinar la prevalencia de cristales de colesterol (CRCo) en granulomas perirradiculares de origen endodóntico y el tipo de reacción que provocan en los tejidos circundantes. Material y métodos: Se estudiaron con microscopía óptica 75 preparados histológicos de archivo pertenecientes a lesiones perirradiculares humanas correspondientes a piezas dentarias que habían recibido un tratamiento endodóntico pre- vio y que, según los informes que acompañaban las muestras, habían sido obtenidas mediante una apicectomía. Del total, 68 muestras fueron diagnosticadas como granulomas, mientras que los 7 restantes se diagnosticaron como quistes inflamato- rios y fueron descartadas. Resultados: 39 granulomas pertenecían a pacientes de sexo femenino con presencia de CRCo en el 58,97% de los ca- sos. Los 29 granulomas restantes pertenecían al sexo mascu- lino y presentaron CRCo en un 41,37%. La mayor proporción de CRCo fue hallada en granulomas pertenecientes a pacien- tes mayores de 62 años. Los CRCo se observaron rodeados de macrófagos y células gigantes multinucleadas, provocando una reacción a cuerpo extraño. También se observaron células espumosas en áreas circundantes. Conclusiones: La presencia de CRCo en granulomas perirradiculares de origen endodóntico provoca una reacción a cuerpo extraño que puede interferir con el proceso de re- paración posendodóntico especialmente en pacientes de edad avanzada (AU)

Aim: Identify and determine the prevalence of cholester- ol crystals (CRCo) in periradicular granulomas of endodontic origin and the type of reaction they produce in the surround- ing tissues. Material and methods: 75 archival histological preparations were studied with optical microscopy. They be- longed to human periradicular lesions corresponding to teeth that had received a previous endodontic treatment and that, according to the reports accompanying the samples, had been obtained by an apicoectomy. Of the total, 68 samples were diagnosed as granulomas, while the remaining 7 were diag- nosed as inflammatory cysts and were discarded. Results: 39 granulomas corresponded to female patients in which the presence of CRCo was observed in 58.97% of the cases. The remaining 29 granulomas were from male patients and showed CRCo in 41.37% of the cases. The highest pro- portion of CRCo was found in patients over 62 years of age. The CRCo were surrounded by macrophages and multinucle- ated giant cells causing a foreign body reaction. Foam cells were also observed in the surrounding areas. Conclusions: The presence of CRCo in periradicular granulomas of endodontic origin could be a factor interfering with periapical healing after conventional endodontic thera- py, especially in elderly patients (AU)

Endoscopic findings in periapical surgery. A cross-sectional study of 206 roots

Background: A study is made of the findings of high-magnification rigid endoscopy at the root end surface following apicoectomy of teeth subjected to periapical surgery.Material and Methods: A cross-sectional study was made of patients subjected to periapical surgery at the Unitof Oral Surgery and Implantology (University of Valencia, Valencia, Spain) between 2011 and 2019. Followingapicoectomy, the root end surfaces were inspected, with the evaluation of untreated canals, isthmuses, craze lines,crack lines, opaque dentin and gaps. Likewise, an analysis was made of the association between patient age andthe tooth type and restoration and the presence of craze lines, cracks, opaque dentin and gaps.Results: The final sample consisted of 168 patients subjected to periapical surgery, with 177 operated teeth and206 roots. Untreated canals were observed in 14 roots (6.8%). Isthmuses were identified in 74 roots (35.9%),particularly in the mesial root of the lower first molar (94.1%). In turn, craze lines were identified in 8.3% of theroots, cracks in 3.9%, and gaps in 53.4%. The prevalence of opaque dentin was 78.3%, with a greater presence inposterior teeth (90.3% in premolars and 86.2% in molars) than in anterior teeth (50.6%) (p<0.001). Patient age andtooth restoration showed no correlation to the studied parameters.Conclusions: Craze lines and crack lines were observed in less than 10% of the roots, though opaque dentin wasidentified in 73% of the roots, particularly in posterior teeth, and gaps were found in over half of the canals. (AU)

Root-end resection with or without retrograde obturation after orthograde filling with two techniques: A micro-CT study.

To evaluate the filling ability of two orthograde obturation techniques followed by the apical resection with or without retrograde obturation through micro-computed tomography (CT). Thirty-two single-rooted permanent teeth were prepared and randomised into four groups (n = 8) according to the orthograde obturation technique (single cone technique [SCT] and mineral trioxide aggregate placement) combined or not with retrograde obturation. The volume of voids (VoV) within the entire endodontic space, the apical 3 mm, and 1 mm after root resection was calculated by micro-CT. Statistical analysis showed no significant difference among the groups regarding the total VoV in all root canals, as well as within the apical 1 mm after root resection. The SCT and apical resection without retrograde filling showed significantly better results in terms of VoV at the apical 3 mm after root resection. Within the study limitations, SCT associated with apical resection without retrograde preparation exhibited a similar or less amount of voids than the other groups.

Present status and future directions: Surgical endodontics.

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown and root resections, surgical perforation repair and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. Whilst nonsurgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

Quiste periapical: diagnóstico y tratamiento / Periapical cyst: diagnosis and treatment

Los quistes periapicales o radiculares representan una de las patologías periapicales más frecuentes dentro del grupo de las lesiones quísticas de los maxilares. Son el resultado de la extensión de proce- sos inflamatorios-infecciosos. Su diagnóstico sigue siendo un desafío para el profesional odontológico, quien debe diferenciarlo de otros procesos inflama- torios periapicales. El objetivo del presente artículo es presentar, apoyado en una revisión de la literatura, el caso clínico de un paciente masculino de 38 años de edad que se presentó a la consulta por leve tume- facción indolora en zona anterosuperior del maxilar. A la inspección se observó borramiento de la región del surco vestibular a nivel de piezas dentarias 1.1, 1.2 y 1.3, de color rojizo con crepitación de la tabla ósea vestibular a la palpación. La tomografía de haz cónico mostró lesión osteolítica, extendida desde zona apical de la pieza dentaria 1.4 hasta zona del elemento dentario 1.1. Se realizó la extirpación de la lesión y api- cectomía. El estudio histológico corroboró el diagnós- tico presuntivo de quiste periapical. Los controles a distancia mostraron buena evolución del tratamiento. Se concluyó en la importancia de realizar un correcto diagnóstico clínico e imagenológico para la selección de un adecuado tratamiento según el caso (AU)

Periapical or radicular cysts represent one of the most frequent periapical pathologies within the group of cystic lesions of the jaws. They are the result of the spread of inflammatory-infectious processes. Its diagnosis continues to be a challenge for the dentist, who must differentiate it from other periapical inflammatory processes. The objective of this article is to present, supported by a review of the literature, the clinical case of a 38-year-old male patient who presented to the consultation due to mild painless swelling in the anterosuperior maxilla. Upon inspection, effacement of the vestibular sulcus region was observed at the level of teeth 1.1, 1.2 and 1.3, reddish in color with crepitation of the buccal bone table on palpation. Cone beam tomography showed an osteolytic lesion that extended from the apical area of tooth 1.4 to area of tooth 1.1. Excision of the lesion and apicoectomy were performed. The histological study corroborated the presumptive diagnosis of periapical cyst. Remote controls showed a good evolution of the treatment. It was concluded on the importance of carrying out a correct clinical and imaging diagnosis for the selection of an adequate treatment according to the case (AU)

Microcirugía endodóntica con planificación digital y guía quirúrgica: caso clínico / Endodontic microsurgery with digital planning and surgical guide: a clinical case

La microcirugía endodóntica (MCE) es una alternativa al tratamiento no quirúrgico de la periodontitis apical persistente. Por su evolución junto a los avances tecnológicos, la incorporación de la tomografía computarizada de haz cónico (CBCT), la tecnología de impresión tridimensional (3D) y las guías quirúrgicas diseñadas con software asistido por computadora, han permitido implementar la planificación digital llevada a cabo en el acto quirúrgico. El objetivo de este informe es describir un caso clínico de MCE guiada, con un protocolo de diseño digital y el uso de una guía quirúrgica impresa en resina biocompatible, diseñada con precisión de acuerdo con las mediciones de CBCT preoperatorias. Se diseñó un kit de trefinas con "sleeves" (Neokings) para realizar la osteotomía y resección de los últimos 3 mm apicales direccionados por la guía quirúrgica. La tabla cortical intacta se recuperó y se utilizó como injerto junto con plasma rico en fibrina. La guía de cirugía apical permite al profesional lograr ubicar con precisión los tejidos objetivos de la cirugía y acortar el tiempo del procedimiento. Un control CBCT inmediato mostró la planificación exacta en 3D del sitio quirúrgico (AU)

Manejo terapéutico de un diente anterior calcificado, y el abordaje de múltiples perforaciones realizadas durante su tratamiento de conductos / Therapeutic management of a calcified anterior teeth, and the approach of multiple perforations performed during root canal treatment

Se trata de un retratamiento de conductos en el diente 1.1. El diente presenta percusión y palpación positiva y movilidad grado II. Ante la falta de información en la radiografía convencional se realiza una TCHC donde se observa tres perforaciones y perdida de la cortical vestibular y apical en el diente 1.1. Se llevó a cabo un tratamiento combinado, primero se realizó el retratamiento ortógrado del conducto con gutapercha termoplástica, segundo una apicectomía y sellado de las perforaciones con MTA de manera quirúrgica. A los 12 meses se comprueba mediante TCHC que se ha producido curación ósea y el diente esta asintomático, pero observamos una discoloracion a nivel de la perforación coronal. A los 5 años esta zona presenta una cavitación y se decide realizar un sellado de la perforación con resina compuesta debido a su localización supracrestal. Un año después la paciente no presenta signos clínicos ni radiológicos de patología

This is a root canals retreatment in tooth 1.1. The tooth presents positive percussion and palpation and grade II mobility. Due to the lack of information from the conventional radiography, we performed a CBCT, three root perforations and loss of the vestibular cortical bone and apical bone were observed in tooth 1.1. A combined treatment was carried out, first the orthograde retreatment of the root canal with thermoplastic obturation technique, second and apicoectomy and sealing of the perforations with MTA by surgery. At 12 months, it is observed in a new TCHC that bone healing has occurred and the tooth is asymptomatic, but we observed a discoloration at the level of the coronal perforation. At 5 years this area presents cavitation and it was decided to seal the perforation with composite resin due to its supracrestal location. A year later, the patient had no clinical or radiological signs of pathology

Guided modern endodontic microsurgery by use of a trephine bur / Gyökércsúcs rezekciója navigált endodontiai mikrosebészeti technikával

Surgical guides and three-dimensional (3D) planning softwares used in everyday dental implantology open new possibilities in other fields of dentistry. While using the operation microscope in endodontic microsurgery provides more precise apicectomy, there is still no consent on the exact localisation and size of the bony window to be prepared for this surgery. Our aim is to describe a new, guided endodontic microsurgery method when osteotomy and apicectomy are planned in a 3D software and performed with a trephine bur. Based on data from Cone Beam Computed Tomography, planning of the surgical guide was performed with a 3D planning software (Smart Guide, dicomLAB, Hungary) in order to define the size of the bony window, the angulation and the depth of the trephine bur during the apicectomy. After preparing a mucoperiosteal flap, with the help of the dentally supported surgical guide, the trephine bur removes the cortical bone and the apex of the root simultaniously. Following the modern microsurgical protocol, after performing the ultrasonic retrograde preparation, mineral trioxide aggregate (ProRoot MTA; Dentsply Maillefer, Ballaigues, Switzerland) is placed as a retrograde filling to close the resected area. After the uneventful healing period, a complete bony regeneration can be seen on the 1-year follow up X-ray. The patient is symptom-free. This technique is considered to be faster and more precise than the non-guided endodontic microsurgery carried out without the utilization of a trephine bur. Orv Hetil. 2020; 161(30): 1260-1265.

Spectrophotometric analysis evaluating apical microleakage in retrograde filling using GIC, MTA and biodentine: an in-vitro study.

BACKGROUND: The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs. METHODS: Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N = 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 min. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm. RESULTS: The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC > MTA > Biodentine> negative control group. The significant difference was observed between GIC and MTA (p = 0.0001) and GIC and Biodentine (p = 0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p = 0.127) and Diamond bur (p = 0.496) respectively. CONCLUSIONS: Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

A 10-year Follow-up Study of 119 Teeth Treated with Apical Surgery and Root-end Filling with Mineral Trioxide Aggregate.

INTRODUCTION: The objective of this clinical study was to assess the long-term outcome (clinical signs/symptoms and radiographic healing) of teeth treated with apical surgery and mineral trioxide aggregate (MTA) for root-end filling. METHODS: One hundred ninety-five patients were recalled 1, 5, and 10 years after apical surgery for clinical and radiographic examinations. Three calibrated observers evaluated the periapical radiographs independently. The evolution of the cases over time was analyzed. Healing classification of teeth was divided into "healed" versus "not healed" teeth using well-established clinical and radiographic healing criteria. The potential influence of sex, age, type of treated tooth, type of MTA, and first-time versus repeat surgery on healing outcome was statistically analyzed. RESULTS: The inception cohort included 195 teeth. The dropout rate after 10 years amounted to 39% (n = 76). Of the 119 teeth available for the 10-year analysis, 97 teeth were classified as healed (81.5%). No significant differences were found with regard to the rate of healed cases for the subcategories of the parameters of age, sex, type of MTA, and first-time or repeat surgery. Concerning the type of treated tooth, the rate of healed maxillary molars (95.2%) differed significantly (P = .035) from the rate of healed maxillary premolars (66.7%). The predictive value of the cases classified as healed at 1 year and remaining so over the 10-year observation period was 86.8%. CONCLUSIONS: This 10-year follow-up study of teeth treated with apical surgery and MTA as root-end filling material showed an acceptable rate of healed cases. Many of the lost teeth had been extracted because of longitudinal root fractures during the observation period.

The evaluation of apicectomy without retrograde filling in terms of lesion size localization and approximation to the anatomic structures

Background: The purpose of this study was to evaluate of the patients who underwent apical resection. Besides assess the classification of resection side, localization, lesion size, approximation of anatomic estructures and the purpose of the apical surgery retrospectively. Material and Methods: In this stutdy 782 patients and 1191 apical resection applied tooth evaluated. 504 of the patients were famale and 278 were male. Patients age was between 13 and 76 years old and operated between January 2016 and January 2017. The study includes incisor, canine and premolar teeth which had the apical resection as the first time. Operation side evaluated from orthopantomograph and periapical radiographs. Results: There were 1191 teeth operated and 966 of them in maxilla and 225 of them in mandible. The number of the incisor teeth were 871, 177 were canine, 129 were premolar and one of them was molar. The total amount of 468 patients had operated by just 1 tooth, 454 of the operated teeth had cyst on the operation side. Premolar and molar side 21 of the 93 lesion had approximation with maxillar sinus. On the other hand in maxilla 39 of 569 lesion had approximation with nasal cavity. In mandibula 1 of the 15 lesion, which involved mandibular premolar teeth, had approximation with mental foramen. Conclusions: Apical resection operation mostly done for one tooth, and the lesion size was less than 10 milimeters. Furthermore apical resection mostly done for incisors cause of odontogenic cyst

No dipsonible

Assessment of Simultaneous Surgery for Odontogenic Sinusitis: Endoscopic Sinus Surgery With Endoscopic Apicoectomy.

Odontogenic sinusitis (OS) is a disease commonly encountered by otolaryngologists and oral surgeons. There is currently no standard consensus for the management of the causative teeth of OS, and the therapeutic outcomes of endodontic surgery remain unclear. The authors herein report the outcomes of simultaneous surgery for OS, endoscopic sinus surgery (ESS) with endoscopic apicoectomy. Twenty-one OS patients who underwent ESS were included in the intent-to-treat population. Eleven patients who simultaneously underwent endoscopic apicoectomy were included as the study group, and another 10 patients who were subjected to the extraction of the causative teeth preceding or during surgery were included as the control group. The postoperative tooth course after surgery in the study group was assessed as the primary outcome by periodic radiographs. The postoperative sinus course was compared between the 2 groups as the secondary outcome. Seventeen teeth were subjected to endoscopic apicoectomy concurrently with ESS, and the treatment success rate for periapical lesions was 94.1% (16 out of 17 teeth), which was consistent with previously reported outcomes for endodontic microsurgery. Ten of 11 patients (90.9%) had good postoperative sinus courses, and the mean wound-healing period of the sinus mucosa was 6.9 ±â€Š3.5 weeks. These results were not significantly different from those obtained for the control group (90% and 6.1 ±â€Š3.2 weeks). This surgical procedure may contribute to the preservation of causative teeth without having an impact on the successful treatment of sinusitis. A comprehensive surgical approach by otolaryngologists and oral surgeons is desirable for the treatment of OS.

[Computer aided design and three-dimensional printing for apicoectomy guide template].

OBJECTIVE: To establish an apicoectomy guide template design and manufacturing method, based on multi-source data fusion, computer aided design (CAD) and fused deposition modeling (FDM). The feasibility of the guide template was preliminary evaluated by the in vitro model experiment. METHODS: An extracted upper anterior tooth, after root canal treatment, was optical scanned, after which the extracted upper anterior tooth was poured in an apicoectomy plaster model. Cone-beam computed tomography (CBCT) scanning of the apicoectomy plaster model was performed, after which optical scanning of the plaster model for apical resection surgery was carried out. All of the relevant CBCT and optical scanning data of the extracted upper anterior tooth and the apicoectomy plaster model were introduced into the Geomagic Studio 2012 software. The multi-source data fusion technology was used to virtually simulate the three-dimensional positional relationship of the extracted tooth, the dentition, the alveolar bone and the gingival, based on which, the three-dimensional design of the apicoectomy guide template was completed in the Geomagic Studio 2012 software. With the technology of fused deposition modeling, the apical resection surgical guide template was three-dimensionally printed with the material of polylactic acid (PLA). Under the guidance of the surgical guide template, the root apical resection was performed on the plaster model. After the apicoectomy, the extracted upper anterior tooth was taken off from the apicoectomy plaster model and then was given the optical scanning. The apical resection length and angle were calculated by the function of distance measurement and angle measurement, and the results were compared with the preset values. RESULTS: The length of the apical resection was 2.88 mm along the direction of the long axis of the tooth, which was 0.12 mm lower than the preset 3 mm. The included angle between the apical resection plane and the long axis of the tooth was 77.9°, 12.1° lower than the preset 90°. CONCLUSION: This study successfully established a digital design and production method of apicoectomy guide template by combing the multi-source data fusion, CAD and FDM technology. The design route and the production method are feasible. The study will provide a technology and methodology reference for the development of domestic special software for the digital design of apicoectomy guide template.

Contemporary CBCT diagnostics-discovery of a new artery with possible impact on surgical planning: the anterior superior palatal alveolar artery.

PURPOSE: An ongoing clinical trial regarding intra- and post-surgical morbidity in maxillary apicoectomies showed significant higher morbidity for upper canines and palatal roots of upper 1st premolars. Analysis of available presurgical cone beam computed tomography (CBCT)-scans revealed the existence of an unknown bone-canal branching off from the bone-canal or groove of the anterior superior alveolar artery (asaa). Aim of the study was the determination of the contents of this newly found bone canal in human cadaver heads, its prevalence as possible standard anatomical structure and its automatized detection with a contemporary high-resolution TRIUM-CBCT-device in vivo. METHODS: 35 human cadaver heads were dissected, the prevalence of the bone-canal determined and its contents analyzed by histology. 835 consecutive routine high-resolution TRIUM-CBCT-scans from routine patients were analyzed by an automatized detection- and tracing-algorithm for in vivo-determination of prevalence of this bone canal. Automatized detection and additional manual tracing were statistically evaluated by SSPS 20.0 software. RESULTS: The bone-canal was found in 96% of the anatomical specimens, its content identified as artery not described until now and named after the first finder "Arteria Kurrekii". Automatized tracing of TRIUM-CBCT-scans with additional manual tracing revealed an in vivo prevalence of this newly found artery of 95% (p ≤ 0.05). CONCLUSIONS: The newly found anterior superior palatal alveolar artery (aspaa-"Arteria Kurrekii") might have the same clinical impact for surgical procedures in the maxilla as the posterior superior alveolar artery (psaa). Its first detection was enabled by high-resolution TRIUM-CBCT devices and prevalence as standard anatomical structure proven in vivo by automatized CBCT-scan analysis.