An Update on Implant-Associated Malignancies and Their Biocompatibility.

Implanted medical devices are widely used across various medical specialties for numerous applications, ranging from cardiovascular supports to orthopedic prostheses and cosmetic enhancements. However, recent observations have raised concerns about the potential of these implants to induce malignancies in the tissues surrounding them. There have been several case reports documenting the occurrence of cancers adjacent to these devices, prompting a closer examination of their safety. This review delves into the epidemiology, clinical presentations, pathological findings, and hypothesized mechanisms of carcinogenesis related to implanted devices. It also explores how the surgical domain and the intrinsic properties and biocompatibility of the implants might influence the development of these rare but serious malignancies. Understanding these associations is crucial for assessing the risks associated with the use of medical implants, and for developing strategies to mitigate potential adverse outcomes.

Necrostatin-1 releasing nanoparticles: In vitro and in vivo efficacy for supporting immunoisolated islet transplantation outcomes.

Immunoisolation of pancreatic islets in alginate microcapsules allows for transplantation in the absence of immunosuppression but graft survival time is still limited. This limited graft survival is caused by a combination of tissue responses to the encapsulating biomaterial and islets. A significant loss of islet cells occurs in the immediate period after transplantation and is caused by a high susceptibility of islet cells to inflammatory stress during this period. Here we investigated whether necrostatin-1 (Nec-1), a necroptosis inhibitor, can reduce the loss of islet cells under stress in vitro and in vivo. To this end, we developed a Nec-1 controlled-release system using poly (D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) as the application of Nec-1 in vivo is limited by low stability and possible side effects. The PLGA NPs stably released Nec-1 for 6 days in vitro and protected beta cells against hypoxia-induced cell death in vitro. Treatment with these Nec-1 NPs at days 0, 6, and 12 post-islet transplantation in streptozotocin-diabetic mice confirmed the absence of side effects as graft survival was similar in encapsulated islet grafts in the absence and presence of Nec-1. However, we found no further prolongation of graft survival of encapsulated grafts which might be explained by the high biocompatibility of the alginate encapsulation system that provoked a very mild tissue response. We expect that the Nec-1-releasing NPs could find application to immunoisolation systems that elicit stronger inflammatory responses, such as macrodevices and vasculogenic biomaterials.

Advanced in vitro hemocompatibility assessment of biomaterials using a new flow incubation system.

Physiologically relevant in vitro hemocompatibility assessment of biomaterials remains challenging. We present a new setup that enables standardized whole blood incubation of biomedical materials under flow. A blood volume of 2 mL is recirculated over test surfaces in a custom-made parallel plate incubation system to determine the activation of hemostasis and inflammation. Controlled physiological shear rates between 125 s-1 and 1250 s-1 and minimized contact to air are combined with a natural-like pumping process. A unique feature of this setup allows tracing adhesion of blood cells to test surfaces microscopically in situ. Validation testing was performed in comparison to previously applied whole blood incubation methodologies. Experiments with the newly developed setup showed that even small obstacles to blood flow activate blood (independent of materials-induced blood activation levels); that adhesion of blood cells to biomaterials equilibrates within 5 to 10 min; that high shear rates (1250 compared to 375 s-1) induce platelet activation; and that hemolysis, platelet factor 4 (PF4) release and platelet loss - but not thrombin formation - depend on shear rate (within the range investigated, 125 to 1250 s-1).

Adverse Reactions Associated with Dermal Fillers in the Oral and Maxillofacial Region: A Venezuelan Experience.

BACKGROUND: Dermal facial fillers are increasingly popular. Published reports on the clinical and histopathologic characteristics related to adverse reactions to dermal fillers in the facial region have been relatively well documented. This study adds to the literature on adverse reactions to injected filler in the oral and maxillofacial region in a South American population. METHODS: A retrospective, descriptive cross-sectional study (2019-2020) was performed. The study population was a dermatology service in Venezuela. Clinical and histopathologic features of patients with adverse effects were documented. RESULTS: A total of 35 cases of adverse reactions associated with cosmetic filler procedures were diagnosed during the analyzed period; of these, six cases (17.1%) involved the oral and maxillofacial region. All cases occurred in women. The mean age at diagnosis was 59.3 years (58-73). In three cases, dermal fillers were used in different locations on the face, while three involved the lips. Five patients exhibited adverse reactions to lip filler. All six cases were histopathologically diagnosed as foreign body reactions to injected material. Four and two cases revealed microscopic features compatible with hyaluronic acid and polymethylmethacrylate, respectively. CONCLUSION: Reflecting the dramatic increase in cosmetic procedures with soft tissue fillers, this study contributed by reporting six cases of foreign body reaction involving the oral and maxillofacial region, confirmed with biopsy and histopathology.

Introducing aesthetic regenerative scaffolds: An immunological perspective.

BACKGROUND: Skin aging arises from immunological responses to tissue deterioration and damage. Tissue repair processes encompass the regeneration of original tissue and 'scarless' wound healing seen in foetuses, and the extreme fibrotic responses and scarring seen in adults. Anti-aging aesthetic medicine uses interventions like biomaterial-based fillers to influence these immunological responses and renew aged tissue structure and function. At filler injection sites, an inflammatory response occurs that causes a spectrum of outcomes, ranging from tissue regeneration to fibrosis and filler encapsulation. Importantly, the resulting inflammatory pathway can be predetermined by the biomaterial injected. AIMS: By understanding this immunological process, we can develop Aesthetic Regenerative Scaffolds (ARS) - aesthetic injectable biomaterials - to direct inflammatory wound healing away from chronic, fibrotic responses, and towards physiological tissue regeneration. MATERIALS AND METHODS: We identified and reviewed literature on the immunological and cellular responses to injected dermal fillers, whereby the wound healing response to the injection was moderated under the influence of an injected biomaterial. RESULTS: We described the mechanisms of dermal wound healing and the use of ARS to direct healing towards tissue regeneration instead of scarring. We also summarised studies on extracellular matrix remodeling by calcium hydroxylapatite. We found that Calcium hydroxylapatite fillers produce collagen as they gradually degrade and their spherical structures serve as a scaffold for tissue regeneration. Furthermore, CaHA improved fibroblast contractility, collagen type III and elastin production, proliferation and angiogenesis with less inflammation than hyaluronic acid fillers. DISCUSSION: Regneration pathways can be influenced at specific points between a facial filler biomaterial and the wound healingmechanisms at its site of implantaion. CONCLUSION: Physicians can select scaffolds that direct the immune response away from a fibrotic chronic inflammatory pathway and towards regeneration to enable true repair of the aging skin.

The plasticity of biocompatibility.

Biocompatibility concerns the phenomena that occur within the interactions between biomaterials and human patients, which ultimately control the performance of many facets of medical technology. It involves aspects of materials science, many different forms of engineering and nanotechnology, chemistry, biophysics, molecular and cellular biology, immunology, pathology and a myriad of clinical applications. It is not surprising that an overarching framework of mechanisms of biocompatibility has been difficult to elucidate and validate. This essay discusses one fundamental reason for this; we have tended to consider biocompatibility pathways as essentially linear sequences of events which follow well-understood processes of materials science and biology. The reality, however, is that the pathways may involve a great deal of plasticity, in which many additional idiosyncratic factors, including those of genetic, epigenetic and viral origin, exert influence, as do complex mechanical, physical and pharmacological variables. Plasticity is an inherent core feature of the performance of synthetic materials; here we follow the more recent biological applications of plasticity concepts into the sphere of biocompatibility pathways. A straightforward linear pathway may result in successful outcomes for many patients; we may describe this in terms of classic biocompatibility pathways. In other situations, which usually command much more attention because of their unsuccessful outcomes, these plasticity-driven processes follow alternative biocompatibility pathways; often, the variability in outcomes with identical technologies is due to biological plasticity rather than material or device deficiency.

Effect of Temperature on Thrombogenicity Testing of Biomaterials in an In Vitro Dynamic Flow Loop System.

To develop and standardize a reliable in vitro dynamic thrombogenicity test protocol, the key test parameters that could impact thrombus formation need to be investigated and understood. In this study, we evaluated the effect of temperature on the thrombogenic responses (thrombus surface coverage, thrombus weight, and platelet count reduction) of various materials using an in vitro blood flow loop test system. Whole blood from live sheep and cow donors was used to assess four materials with varying thrombogenic potentials: negative-control polytetrafluoroethylene (PTFE), positive-control latex, silicone, and high-density polyethylene (HDPE). Blood, heparinized to a donor-specific concentration, was recirculated through a polyvinyl chloride tubing loop containing the test material at room temperature (22-24°C) for 1 hour, or at 37°C for 1 or 2 hours. The flow loop system could effectively differentiate a thrombogenic material (latex) from the other materials for both test temperatures and blood species ( p < 0.05). However, compared with 37°C, testing at room temperature appeared to have slightly better sensitivity in differentiating silicone (intermediate thrombogenic potential) from the relatively thromboresistant materials (PTFE and HDPE, p < 0.05). These data suggest that testing at room temperature may be a viable option for dynamic thrombogenicity assessment of biomaterials and medical devices.

Alogenosis por biomateriales, nuestra experiencia / Biomaterials allogenosis, our experience

Introducción y objetivo: Los biomateriales son sustancias o combinación de sustancias de origen natural o sintético diseñadas para interactuar con los sistemas biológicos con el fin de evaluar, tratar, aumentar o sustituir algún tejido, órgano o función del organismo humano. La razón que nos motiva su estudio está en el uso y abuso, no autorizado, para su aplicación en seres humanos y las consecuencias negativas que generan los mal llamados “procedimientos estéticos” en pacientes tratados por personal no médico y no calificado, generando un problema de salud pública en el que los cirujanos plásticos somos interconsultados y debemos dar opciones de solución quirúrgica. Material y método: Estudiamos una población de 250 pacientes de varios niveles socioeconómicos en Venezuela, que entre 2008 y 2016 acudieron a nuestra consulta para diagnóstico, tratamiento y seguimiento clínico y quirúrgico, con el fin de determinar los grupos etarios, sexo y localización anatómica de las lesiones, conocer las consecuencias clínicas y brindar un estudio diagnóstico, y en cada caso, un análisis del tratamiento a seguir según su afectación. Conclusiones: En base a nuestra experiencia, pretendemos contribuir a generar una casuística que brinde información para concienciar sobre el riesgo de salud pública que genera esta patología en los pacientes afectados. (AU)

Background and objective: Biomaterials are substances or a substances combination from natural or synthetic origin, designed to interact with biological systems with the purpose of evaluating, treating, augmentation or substitution of body tissues, organs or body functions. Our concern on this study is due to the wrong and non-authorized use and abuse of substances in so called “aesthetic procedures” which besides of being applied by non qualified health or non medical personnel, have originated a public health problem in which plastic surgeons have been requested to act and to offer surgical solutions. Methods: We conduct an study on a population of 250 patients of various socioeconomic leves in Venezuela, who attended our consultation from 2008 to 2016 for diagnosis, treatment and clinical and surgical follow-up, in order to identify the age groups and according to sex and anatomical location of the lesions, to know the clinical consequences and to provide a diagnostic study and in each particular case an analysis of the treatment to be followed. Conclusions: Based on our experience, we intend to contribute to generate a casuistry that provides information to raise awareness about the public health risk that this pathology generates in affected patients. (AU)

Transcriptomic Analysis in Human 3D Skin Model Injected with Resorbable Hyaluronic Acid Fillers Reveals Foreign Body Response.

Usage of injectable dermal fillers applied for aesthetic purposes has extensively increased over the years. As such, the number of related adverse reactions has increased, including patients showing severe complications such as product migration, topical swelling and inflammatory reactions of the skin. In order to understand the underlying molecular events of these adverse reactions we performed a genome-wide gene expression study on the multi-cell type human Phenion® Full-Thickness Skin Model exposed to five experimental hyaluronic acid (HA) preparations with increasing cross-linking degree, four commercial fillers from Perfectha®, and non-resorbable filler Bio-Alcamid®. In addition, we evaluated whether cross-linking degree or particle size of the HA-based fillers could be associated with the occurrence of adverse effects. In all cases, exposure to different HA fillers resulted in a clearly elevated gene expression of cytokines and chemokines related to acute inflammation as part of the foreign body response. Furthermore, for one experimental filler genes of OXPHOS complexes I-V were significantly down-regulated (adjusted p-value < 0.05), resulting in mitochondrial dysfunction which can be linked to over-expression of pro-inflammatory cytokines TNFα and IL-1ß and chemokine CCL2. Our hypothesis that cross-linking degree or particle size of the HA-based fillers is related to the biological responses induced by these fillers could only partially be confirmed for particle size. In conclusion, our innovative approach resulted in gene expression changes from a human 3D skin model exposed to dermal fillers that mechanistically substantiate aforementioned adverse reactions, and thereby adds to the weight of evidence that these fillers may induce inflammatory and fibrotic responses.

Clinical and histological comparative outcomes after injections of poly-L-lactic acid and calcium hydroxyapatite in arms: A split side study.

BACKGROUND: Although much has been published on the use of poly-L-lactic acid (PLLA) and calcium hydroxyapatite (CaHA) for off-face indications, questions remain regarding their exact mechanisms of action in subcutaneous tissue and their comparative efficacy. OBJECTIVE: To present the clinical and histological results of the PLLA and CaHA injections into the opposing arms of the same patients. METHODS: Five women received superficial subcutaneous injections of PLLA into the left arm and CaHA into the right arm. After three sessions, the clinical and histological outcomes were analyzed. RESULTS: After the first session, three patients showed improvement in the right arm (CaHA), but at the end of study, two patients showed better results in the left arm (PLLA). Histologically, moderate to intense lymphocytic and giant cell infiltrate, as well as collagen and elastic fiber neoformation, were observed equally near the particles of both products. Dermis had no inflammatory or fiber alterations. CONCLUSION: In this study, there were no clinical differences between these two fillers. Despite current thinking and previous histological studies, we found both products produced moderate to intense inflammatory reaction, as well as collagenic/elastogenic fiber neoformation, only in the subcutaneous tissue of the immediate vicinity and surrounding the individual filler particles.

Biomimetic surface topography as a potential modulator of macrophages inflammatory response to biomaterials.

The implantation of biomaterial devices can negatively impact the local microenvironment through several processes including the injury incurred during the implantation process and the associated host inflammatory response. Immune cell responses to implantable biomaterial devices mediate host-material interactions. Indeed, the immune system plays a central role in several biological processes required for the integration of biomaterials such as wound healing, tissue integration, inflammation, and foreign body reactions. The implant physicochemical properties such as size, shape, surface area, topography, and chemistry have been shown to provide cues to the immune system. Its induced immune-modulatory responses towards inflammatory or wound healing phenotypes can determine the success of the implant. In this work, we aim to evaluate the impact of some biomimetic surface topographies on macrophages' acute inflammatory response. For that, we selected 4 different biological surfaces to replicate through soft lithography on spin casting PCL membranes. Those topographies were: the surface of E. coli, S.eppidermidis and L929 cells cultured in polystyrene tissue culture disks, and an Eggshell membrane. We selected a model based on THP-1-derived macrophages to study the analysis of the expression of both pro-inflammatory and anti-inflammatory markers. Our results revealed that depending on the surface where these cells are seeded, they present different phenotypes. Macrophages present a M1-like phenotype when they are cultured on top of PCL membranes with the surface topography of E. coli and S. epidermidis. When cultured on membranes with L929 monolayers or Eggshell membrane surface topography, the macrophages present a M2-like phenotype. These results can be a significant advance in the development of new implantable biomaterial devices since they can help to modulate the inflammatory responses to implanted biomaterials by controlling their surface topography.

Severe Airway Edema Following Calcium Hydroxylapatite (CaHA) Injection Augmentation.

This case study presents an abnormal complication after routine injection augmentation using calcium hydroxylapatite (CaHA) vocal fold filler in-office on a 73-year-old female. The patient presented initially with severe dysphonia, hypophonia, and a past surgical history of total thyroidectomy, bilateral neck dissection, and a right lateral neck dissection for history of metastatic papillary thyroid carcinoma. She also had a past medical history of hypothyroidism. Post-injection of CaHA, the patient developed severe laryngeal edema, limited vocal cord mobility, obliteration of the pyriform, and a significantly reduced airway aperture requiring intensive care monitoring. Although uncommon, injectable fillers can result in complications which can be severe. Careful technique, the volume of injectate, and hypersensitivity should be considered in reducing complications following injection augmentation. There are multiple injection techniques to consider. The most direct approach is with direct laryngoscopy to allow for visualization of glottic incompetence. A smaller slotted laryngoscope can be considered for vocal fold injection as an alternative and without endotracheal intubation. Although these techniques allow for injection, real-time assessment of vocal fold closure is done in an awake patient. Therefore, laryngeal injection can be considered via percutaneous, per-oral, and trans-nasal approaches.

Evaluation of Adverse Effects of Resorbable Hyaluronic Acid Fillers: Determination of Macrophage Responses.

Resorbable tissue fillers for aesthetic purposes can induce severe complications including product migration, late swelling, and inflammatory reactions. The relation between product characteristics and adverse effects is not well understood. We hypothesized that the degree of cross-linking hyaluronic acid (HA) fillers was associated with the occurrence of adverse effects. Five experimental HA preparations similar to HA fillers were synthesized with an increasing degree of cross-linking. Furthermore, a series of commercial fillers (Perfectha®) was obtained that differ in degradation time based on the size of their particulate HA components. Cytotoxic responses and cytokine production by human THP-1-derived macrophages exposed to extracts of the evaluated resorbable HA fillers were absent to minimal. Gene expression analysis of the HA-exposed macrophages revealed the responses related to cell cycle control and immune reactivity. Our results could not confirm the hypothesis that the level of cross-linking in our experimental HA fillers or the particulate size of commercial HA fillers is related to the induced biological responses. However, the evaluation of cytokine induction and gene expression in macrophages after biomaterial exposure presents promising opportunities for the development of methods to identify cellular processes that may be predictive for biomaterial-induced responses in patients.

Comparison of animal and human blood for in vitro dynamic thrombogenicity testing of biomaterials.

BACKGROUND: To determine suitable alternatives to human blood for in vitro dynamic thrombogenicity testing of biomaterials, four different animal blood sources (ovine, bovine, and porcine blood from live donors, and abattoir porcine blood) were compared to fresh human blood. METHODS: To account for blood coagulability differences between individual donors and species, each blood pool was heparinized to a donor-specific concentration immediately before testing in a dynamic flow loop system. The target heparin level was established using a static thrombosis pre-test. For dynamic testing, whole blood was recirculated at room temperature for 1 h at 200 ml/min through a flow loop containing a single test material. Four materials with varying thrombotic potentials were investigated: latex (positive control), polytetrafluoroethylene (PTFE) (negative control), silicone (intermediate thrombotic potential), and high-density polyethylene (HDPE) (historically thromboresistant). Thrombus weight and surface area coverage on the test materials were quantified, along with platelet count reduction in the blood. RESULTS: While donor-specific heparin levels varied substantially from 0.6 U/ml to 7.0 U/ml among the different blood sources, each source was able to differentiate between the thrombogenic latex and the thromboresistant PTFE and HDPE materials (p < 0.05). However, only donor ovine and bovine blood were sensitive enough to differentiate an increased response for the intermediate thrombotic silicone material compared to PTFE and HDPE. CONCLUSIONS: These results demonstrated that multiple animal blood sources (particularly donor ovine and bovine blood) may be suitable alternatives to fresh human blood for dynamic thrombogenicity testing when appropriate control materials and donor-specific anticoagulation levels are used.

IQGAP1-mediated mechanical signaling promotes the foreign body response to biomedical implants.

The aim of this study was to further elucidate the molecular mechanisms that mediate pathologic foreign body response (FBR) to biomedical implants. The longevity of biomedical implants is limited by the FBR, which leads to implant failure and patient morbidity. Since the specific molecular mechanisms underlying fibrotic responses to biomedical implants have yet to be fully described, there are currently no targeted approaches to reduce pathologic FBR. We utilized proteomics analysis of human FBR samples to identify potential molecular targets for therapeutic inhibition of FBR. We then employed a murine model of FBR to further evaluate the role of this potential target. We performed histological and immunohistochemical analysis on the murine FBR capsule tissue, as well as single-cell RNA sequencing (scRNA-seq) on cells isolated from the capsules. We identified IQ motif containing GTPase activating protein 1 (IQGAP1) as the most promising of several targets, serving as a central molecular mediator in human and murine FBR compared to control subcutaneous tissue. IQGAP1-deficient mice displayed a significantly reduced FBR compared to wild-type mice as evidenced by lower levels of collagen deposition and maturity. Our scRNA-seq analysis revealed that decreasing IQGAP1 resulted in diminished transcription of mechanotransduction, inflammation, and fibrosis-related genes, which was confirmed on the protein level with immunofluorescent staining. The deficiency of IQGAP1 significantly attenuates FBR by deactivating downstream mechanotransduction signaling, inflammation, and fibrotic pathways. IQGAP1 may be a promising target for rational therapeutic design to mitigate pathologic FBR around biomedical implants.

THE METHOD OF ATOMIC FORCE MICROSCOPY AS A POSSIBLE TOOL FOR TESTING THE BIOCOMPATIBILITY OF IMPLANTS IN TRAUMATOLOGY AND ORTHOPEDICS PRACTICE.

OBJECTIVE: The aim: To establish the possibility of using the atomic force microscope (AFM) to predict the body's reaction to the implant. PATIENTS AND METHODS: Materials and methods: A total of 32 patients, 22 men and 10 women, the average age of the patients was 55±6 years, were included in the study. They performed pre- and post-operative testing of the biocompatibility of orthopedic implant materials with the patient's body with the help of AFM. RESULTS: Results: According to the research, an increase in pro-inflammatory factors was found, which may indicate a constant inflammatory process, which is probably related to the presence of the implant. CONCLUSION: Conclusions: On the basis of atomic force spectroscopy, an express method of testing biomaterials for compatibility with the body of a specific recipient and studying the effect of the reactions of recipient tissues on the surface of various implants has been developed. The obtained results can be useful in planning further clinical studies.

Thrombogenicity of biomaterials depends on hemodynamic shear rate.

BACKGROUND: While it is well recognized that different biomaterials induce thrombosis at low shear rates, the effect of high shear rates may be quite different. We hypothesize that the amount of thrombus formation on a given material can be greatly influenced by the local shear rate. METHODS: We tested this hypothesis with two different whole blood perfusion loop assays to quantify biomaterial thrombogenicity as a function of shear stress. One assay uses obstructive posts (pins) of material positioned centrally in a tube perfused at high shear rate of >5000/s for 24 h. A second assay uses a parallel plate chamber to perfuse low (<150/s), medium (~500/s), and high shear rates over 96 h. We evaluated the thrombogenicity of seven different biomaterials including stainless steel, acrylic, ceramic, Dacron, polytetrafluoroethylene (PTFE), silicone, and polyvinyl chloride (PVC). RESULTS: For the pin assay, thrombus mass was significantly greater for stainless steel than either zirconia ceramic or acrylic (p < 0.001). Similarly, the parallel plate chamber at high shear showed that steel and PTFE (p < 0.02) occluded the chamber faster than acrylic. In contrast, a low shear parallel plate chamber revealed that stainless steel and PTFE were least thrombogenic, while silicone, Dacron, and other plastics such as acrylic were most thrombogenic. Histology revealed that high shear thrombi had a large proportion of platelets not seen in the low shear fibrin-rich thrombi. CONCLUSION: This differential thrombogenicity based on shear rate conditions may be important in the selection of biomaterials for blood-contacting devices.

Biomaterials-Driven Sterile Inflammation.

Performance of the biomaterials used for regenerative medicine largely depends on biocompatibility; however, the biological mechanisms underlying biocompatibility of a biomaterial within the host system is poorly understood. In addition to the classical immune response against non-self-entities, the sterile inflammatory response could limit the compatibility of biological scaffolds. Whereas the immediate to short-term host response to a biomaterial implant have been characterized, the long-term progression of host-biomaterial relationship has not been described. This article explores the novel concept of biomaterials-driven sterile inflammation (BSI) in long-term biodegradable implants and throws light for possible explanation for the onset of BSI and the associated damage-associated molecular patterns. The understanding of BSI would advance the current strategies to improve biomaterial-host tissue integration and open novel translational avenues in biomaterials-based tissue regeneration. Impact statement Understanding the novel concept of biomaterials-driven sterile inflammation and associated damage-associated molecular patterns in long-term biodegradable implants would determine their success and improves the tissue engineering and regenerative strategies.

Interactions between the foreign body reaction and Staphylococcus aureus biomaterial-associated infection. Winning strategies in the derby on biomaterial implant surfaces.

Biomaterial-associated infections (BAIs) are an increasing problem where antibiotic therapies are often ineffective. The design of novel strategies to prevent or combat infection requires a better understanding of how an implanted foreign body prevents the immune system from eradicating surface-colonizing pathogens. The objective of this review is to chart factors resulting in sub-optimal clearance of Staphylococcus aureus bacteria involved in BAIs. To this end, we first describe three categories of bacterial mechanisms to counter the host immune system around foreign bodies: direct interaction with host cells, modulation of intercellular communication, and evasion of the immune system. These mechanisms take place in a time frame that differentiates sterile foreign body reactions, BAIs, and soft tissue infections. In addition, we identify experimental interventions in S. aureus BAI that may impact infectious mechanisms. Most experimental treatments modulate the host response to infection or alter the course of BAI through implant surface modulation. In conclusion, the first week after implantation and infection is crucial for the establishment of an S. aureus biofilm that resists the local immune reaction and antibiotic treatment. Although established and chronic S. aureus BAI is still treatable and manageable, the focus of interventions should lie on this first period.