Application of Zero-profile Spacer in the Treatment of Three-level Cervical Spondylotic Myelopathy: 5-year Follow-up Results.

STUDY DESIGN: A retrospective study. OBJECTIVE: To assess the long-term results of zero-profile spacer for 3-level anterior cervical discectomy and fusion (ACDF). SUMMARY OF BACKGROUND DATA: Although widely used, there are still controversies about the long-term results of zero-profile spacer, especially in multilevel cases. METHODS: Cases received 3-level ACDF for cervical spondylotic myelopathy (CSM) using either zero-profile spacer (n = 27) (ZP Group), or plate and cages (n = 34) (PC Group), and with 5-year follow-up were reviewed. Neurological function and life quality were assessed by modified Japanese Orthopaedic Association (mJOA) score, Neck Disability Index (NDI), and Short-Form 36 (SF-36) score. Disc height, cervical lordosis, fusion rate, and surgical complications were observed. RESULTS: Neurological recovery and life quality improvement were similar in both groups. Disc height and cervical lordosis (C2-7 Cobb angle) were well restored after operations, but lost in both groups during follow-up. Loss of correction (LOC) in disc height was larger in ZP Group (11.38% vs 5.71%, P < 0.05) at 5-year follow-up. LOC of cervical lordosis in ZP group constantly grew from 11.28% to 48.13% during 5-year follow-up, significantly higher than that in the PC group (from 7.43% to 14.01%) (P < 0.05). The rate of postoperative dysphagia was no statistical difference between the two groups, and symptoms were all disappeared within 1 year. There were 10 levels of adjacent segment degeneration (1 in ZP Group, and 10 in PC Group, P = 0.02). Cage subsidence (11 of 81 levels, 13.58%) and screw migration (2 of 81 levels, 2.47%) were only observed in the ZP Group. The migrated screws in one case were surgically removed. Fusion was achieved in all cases. CONCLUSIONS: In long-term follow-up of 3-level ACDF for CSM, zero-profile spacer has the similar clinical results, but loss of correction of disc height and cervical alignment were significantly higher, compared with anterior plate and cages. LEVEL OF EVIDENCE: 3.

Radiographic Fusion Rates Following a Stand-alone Interbody Cage Versus an Anterior Plate Construct for Adjacent Segment Disease After Anterior Cervical Discectomy and Fusion.

STUDY DESIGN: Case-control. OBJECTIVES: The aim of this study was to evaluate fusion rates and compare a stand-alone cage construct with an anterior-plate construct in the setting revision anterior cervical discectomy and fusion (ACDF) for adjacent segment disease. SUMMARY OF BACKGROUND DATA: Anterior cervical discectomy and fusion are considered the criterion standard of surgical treatment for cervical myelopathy and radiculopathy. One common consequence is adjacent segment disease. Treatment of adjacent segment disease is complicated by the previous surgical implants, which may make application of an additional anterior cervical plate difficult. Stand-alone cage constructs obviate the need for removal or revision of prior implants in the setting of adjacent segment disease. METHODS: All patients undergoing surgery for adjacent segment disease in a 2-year period were identified and separated into groups based on implant construct. A control group of patients undergoing primary, single-level ACDF were selected from during the same 2-year period. Demographic variables, fusion rate, and reoperation rate were compared between groups. Continuous variables were compared using Student t test, fusion, and revision rates were compared using Pearson χ test. RESULTS: Patients undergoing primary ACDF had lower age and American Society of Anesthesia score as well as shorter operative time. Fusion rate was higher for primary ACDF compared to all patients who underwent ACDF for adjacent segment disease (95% vs. 74%). When compared to primary ACDF, patients with a stand-alone cage construct had significantly lower fusion rate (69% vs. 95%) and higher reoperation rate (14% vs. 0%). There were no significant differences in anterior plate construct versus stand-alone cage construct in terms of fusion and reoperation. CONCLUSION: Symptomatic adjacent segment disease can be managed surgically with either revision anterior plating or a stand-alone cage constructs, although our results raise questions regarding a difference in fusion rates that requires further investigation. LEVEL OF EVIDENCE: 3.

Prognosis of Hardware-Related Problems in Anterior Cervical Discectomy and Fusion with Cage and Plate Constructs.

OBJECTIVE: To analyze hardware-related problems and their prognoses after anterior cervical discectomy and fusion (ACDF) using cages and plates for degenerative and traumatic cervical disc diseases. METHODS: The study included 808 patients who underwent anterior cervical discectomy and fusion for degenerative and traumatic disc diseases with >1 year of follow-up. We investigated time of onset and progression of problems associated with instrumentation and cage usage. The mean follow-up time was 3.4 years. Type of plate, range and level of fusion, patient factors (age, sex, body mass index, and bone mineral density), and local kyphosis were evaluated. RESULTS: Complications were found in 132 cases (16.5%), including subsidence in 69 cases, plate loosening in 8 cases, screw loosening in 8 cases, screw breakage in 1 case, and multiple complications in 36 cases. In 3 cases, additional posterior cervical surgery was performed. One case needed hardware revision. There were no esophageal, tracheal, or neurovascular structural injuries secondary to metal failure. There were no significant differences in type of plate, level of surgery, or patient factors. The greater the number of fusion segments, the greater the incidence of complications (P = 0.001). The clinical outcomes improved regardless of the complications (P = 0.083). CONCLUSIONS: Most hardware-related complications are not symptomatic and can be treated conservatively. Only a few cases need revision surgery. Precise surgical techniques are needed in multilevel anterior cervical discectomy and fusion (>3 levels) because of the increased complication rate.

Biomechanical Comparison of Optimal Shapes for the Cervical Intervertebral Fusion Cage for C5-C6 Cervical Fusion Using the Anterior Cervical Plate and Cage (ACPC) Fixation System: A Finite Element Analysis.

BACKGROUND The fifth and sixth cervical vertebrae (C5-C6) represent the high-risk segment requiring surgical correction in cervical spondylosis. Anterior cervical discectomy and fusion (ACDF) of C5-C6 includes an intervertebral fusion cage to maintain foraminal height and is combined with anterior plate fixation. The shape of the intervertebral cage can affect the postoperative outcome, including the rates of fusion, subsidence, and neck pain. This study aimed to use finite element (FE) parametric analysis to compare biomechanical properties of changes in intervertebral cage shape for C5-C6 cervical fusion using the anterior cervical plate and cage (ACPC) fixation system. MATERIAL AND METHODS Five shapes were designed for cervical intervertebral cages, square, oval, kidney-shaped, clover-shaped, and 12-leaf-shaped. The performance was evaluated following implantation into the validated normal C5-C6 FE model using simulation with five physiological conditions. The indicators included the maximum von Mises stress of the endplates, the fusion cages, and the cervical vertebrae. The postoperative subsidence-resistance properties were determined, including the interior stress responses of the intervertebral cages and the surrounding tissues. The fusion-promoting properties were evaluated by the interior stress responses of the bone grafts. RESULTS The optimal shape of the cervical intervertebral cage was the 12-leaf-shape for postoperative subsidence resistance. The kidney shape for the cervical intervertebral cage was optimal for postoperative fusion. CONCLUSIONS FE analysis identified the optimal cervical intervertebral cage design for ACPC fixation of C5-C6. This method may be useful for future developments in the design of spinal implants.

Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity.

BACKGROUND: This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. MATERIAL AND METHODS: Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. RESULTS: Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents' excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). CONCLUSIONS: The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

Fibular strut allograft influences reduction and outcomes after locking plate fixation of comminuted proximal humeral fractures in elderly patients: a retrospective study.

BACKGROUND: Proximal humeral fractures (PHFs) are the third most commonly occurring fractures in elderly patients. Most of these fractures can be treated with conservative methods, but the optimal surgical treatment strategy for unstable fractures in elderly patients remains controversial. This study aimed to compare the radiological and clinical outcomes between locking compression plate (LCP) fixation and LCP fixation with fibular allograft implantation for the treatment of comminuted PHFs. METHODS: We retrospectively reviewed 60 patients (mean age, 72.75 years) with closed 3- or 4-part fractures, and a minimum of 2 years of follow-up. Fracture reduction was quantitatively determined by humeral head height (HHH) and neck-shaft angle (NSA). The clinical outcome was evaluated by Constant-Murley score (CMS) and American Shoulder and Elbow Surgeons (ASES) score. RESULT: The average radiological changes were higher in the LCP group than in the locking plate with fibular allograft group (HHH of 4.16 mm vs 1.18 mm [p < 0.001] and NSA of 9.94° versus 3.12° [p < 0.001]) . The final average outcome scores were lower in the LCP group than in the FA group (CMS of 73.00 vs 78.96 [p = 0.024] and ASES score of 72.80 vs 78.64 [p = 0.022]). The FA group showed better forward elevation (p = 0.010) and abduction (p = 0.002); however, no significant differences were observed for shoulder external rotation or internal rotation. The number of complications was higher in the LCP group (28.57%) than in the FA group (1.2%) (p < 0.001). CONCLUSION: For comminuted PHFs in elderly patients, LCP fixation combined with a fibular allograft is reasonable option to ensure satisfactory radiological and clinical outcomes. TRIAL REGISTRATION: ZDYJLY(2018)New-9 . Name of registry: IEC for clinical Research of Zhongda Hospital, Affiliated to Southeast University. Date of registration: 2018-05-17.

Effect of intramedullary nail and locking plate in the treatment of proximal humerus fracture: an update systematic review and meta-analysis.

BACKGROUND: To evaluate the effect of intramedullary nail and locking plate in the treatment of proximal humerus fracture (PHF). METHODS: China National Knowledge Infrastructure (CNKI), Chinese Scientific Journals Database (VIP), Wan-fang database, Chinese Biomedicine Database (CBM), PubMed, EMBASE, Web of Science, and Cochrane Library were searched until July 2018. The eligible references all show that the control group uses locking plates to treat PHF, while the experimental group uses intramedullary nails to do that. Two reviewers independently retrieved and extracted the data. Reviewer Manager 5.3 was used for statistical analysis. RESULTS: Thirty-eight retrospective studies were referred in this study which involves 2699 patients. Meta-analysis results show that the intramedullary nails in the treatment of proximal humeral fractures are superior to locking plates in terms of intraoperative blood loss, operative time, fracture healing time, postoperative complications, and postoperative infection. But there is no significance in constant, neck angle, VAS, external rotation, antexion, intorsion pronation, abduction, NEER, osteonecrosis, additional surgery, impingement syndrome, delayed union, screw penetration, and screw back-out. CONCLUSIONS: The intramedullary nail is superior to locking plate in reducing the total complication, intraoperative blood loss, operative time, postoperative fracture healing time and postoperative humeral head necrosis rate of PHF. Due to the limitations in this meta-analysis, more large-scale, multicenter, and rigorous designed RCTs should be conducted to confirm our findings. TRIAL REGISTRATION: PROSPERO CRD42019120508.

Comparison of implant failure rates of different plates for midshaft clavicular fractures based on fracture classifications.

BACKGROUNDS: The aim of our study was to investigate failure rates of reconstruction plate and non-reconstruction plate, and find the best strategy for implant selection for different fracture types for midshaft clavicular fractures. PATIENTS AND METHODS: Two hundred twenty-six consecutive patients with midshaft clavicular fractures who received open reduction and plate fixation during Jan 2012 to July 2017 were reviewed. The correlations between implant failure rates and risk factors including demographic data, fracture classifications, and implant types were analyzed. RESULTS: AO/OTA fracture classification and plate types are the most important factors affecting implant failure for midshaft clavicular fractures. Reconstruction plate had a significantly higher failure rate (53%) than that of non-reconstruction plates (3%) in comminuted midshaft clavicular (AO/OTA 15-2C) fractures (P value < 0.01). However, the difference was not significant in AO/OTA 15-2A and 2B classifications. CONCLUSION: Patients with comminuted midshaft clavicular (AO/OTA 15-2C) fractures treated with reconstruction plates had very high implant failure rates compared to non-reconstruction plates. We suggested that patients with comminuted midshaft clavicular (AO/OTA 15-2C) fractures treated with reconstruction plates need more protection and more frequent follow-up in the postoperative period.

Comparison of extended anterolateral approach in treatment of simple/complex tibial plateau fracture with posterolateral tibial plateau fracture.

BACKGROUND: Our hospital has recently used the extended anterolateral approach in posterolateral tibial plateau fracture. We compared the clinical effects of this method in Schatzker type II or type V/VI fractures with posterolateral tibial plateau fracture based on our patients. METHODS: The patients from January 2013 to December 2015 were summarized, and some of them were assisted with arthroscopy. According to Schatzker classification, patients with Schatzker type II fracture were divided into group A; patients with Schatzker type V/VI fracture were divided into group B. The fracture characteristics, operation statistics, and postoperative functional evaluation of each group were compared. RESULTS: A total of 46 patients were included in the study and were followed up for 23-45 months. There were 24 cases in group A and 22 cases in group B. The operation time and the amount of bleeding were significantly less in group A (P < 0.05). Twelve cases were assisted with arthroscopy including 6 patients in each group. The fracture healing time made no significant difference in the two groups (P > 0.05). All patients experienced no significant influence on daily life. The knee Rasmussen score was 26.8 in group A and 23.5 in group B (P > 0.05), and the knee range motion was 115.5° in group A and 106.6° in group B (P > 0.05). The excellent and good rate of reduction was 91.7% in group A and 81.8% in group B (P > 0.05), but the excellent rate of reduction was 83.3% in group A and 27.3% in group B (P < 0.05). The unfixed rate of posterolateral fracture was 16.7% in group A and 36.4% in group B (P > 0.05). One patient in group B suffered postoperative wound infection. CONCLUSIONS: The extended anterolateral approach could obtain similar satisfactory clinical results in simple/complex tibial plateau fracture with posterolateral tibial plateau fracture. It seemed that easier operation, better posterolateral fracture reduction, and fixation occurred in relative simple fracture from our cases. TRIAL REGISTRATION: It was a retrospective study. This study was consistent with the ethical standards of the Second Affiliated Hospital of Zhejiang University Medical College and was approved by the hospital ethics committee and the trial registration number of our hospital was 20170053.

High failure rate of proximal femoral locking plates in fixation of trochanteric fractures.

BACKGROUND: The aim of this study was to report our previous results of treatments for trochanteric fractures with proximal femoral locking plates (PFLP) and to analyze the underlying mechanisms and possible risk factors associated with the high failure rate of this technique. METHODS: From January 2010 to October 2014, 273 consecutive patients with trochanteric femoral fractures were identified, and 95 patients (with 97 fractures) ultimately met the inclusion criteria. Clinical records regarding demographic features and intraoperative data including total incision length, operation time, blood loss, and failures detected in radiographs were documented and assessed. The collected data were analyzed with SPSS 19.0 software. RESULTS: The stable group (AO/OTA 31 A1 and A2.1) had less blood loss than the unstable group (AO/OTA 31 A2.2, A2.3, and A3). The ultimate failure rate was 36% in 97 fractures. The obvious complications in this study included nonunion in 7 (7.2%) fractures, implant breakage in 4 (4.1%) fractures, varus deformity in 34 (35%) fractures, and loosening of the proximal femoral screw in 21 (21.6%) fractures. Six patients received reoperations. The total failure rate in the stable group was 17% and was 50% in the unstable group. In patients greater than 60 years old in the unstable group, the failure rate was 60.5%. CONCLUSIONS: High failure rates of PFLP were observed in patients with trochanteric fracture, especially in patients who were greater than 60 years old with unstable fracture types. PFLP was not an appropriate treatment for trochanteric fractures.

A new anatomic locking plate for the treatment of posterolateral tibial plateau fractures.

BACKGROUND: Posterolateral tibial plateau fractures have become more common, and their treatment is of great importance to knee function. Additionally, there is no available literature detailing specialized anatomic locking plate for tibial plateau fractures. Therefore, the aim of the study was to evaluate the safety and clinical efficacy of an innovative anatomic locking plate for treatment of posterolateral tibial plateau fractures. METHODS: Between March 2014 and January 2016, 12 patients with posterolateral tibial plateau fracture underwent surgery with the anatomic locking plate for the posterolateral tibial plateau via the posterolateral approach. Relevant operational data for clinical evaluation were collected. RESULTS: The mean follow-up time was 26 months, and the mean age was 35 years for 12 patients. The mean interval between the time of injury and the surgery was 6.1 days. Radiological fracture union was evident in all patients at 12 weeks. During surgery, the blood loss ranged from 100 to 300 mL, and the duration ranged from 55 to 90 min. The Tegner-Lysholm functional score ranged from 85 to 97 at the final follow-up. Moreover, the final Rasmussen functional score ranged from 25 to 29, and Rasmussen anatomical score ranged from 13 to 18. CONCLUSIONS: The newly designed anatomic locking plate for the posterolateral tibial plateau provided adequate fixation along the posterolateral tibial plateau. It proved to be safe and effective in a small-sample-size population (12 patients) during a 12- to 34-month follow-up.

A comparison of a self-locking stand-alone cage and anterior cervical plate for ACDF: Minimum 3-year assessment of radiographic and clinical outcomes.

OBJECTIVES: The self-locking stand-alone cage has been clinically applied in treating cervical degenerative disc disease (CDDD). However, no long-term clinical and radiographic studies have been performed so far. This retrospective study was designed to analyze and compare the efficacy and outcomes of anterior cervical discectomy and fusion (ACDF) using self-locking stand-alone cages and cages with the anterior cervical plating system. PATIENTS AND METHODS: A total of 98 consecutive patients were recruited in this study. Patients in the cage group were given stand-alone self-locking cages, and patients in the plate group were treated with cages and anterior plate fixation. The operative time, intraoperative blood loss and complications were recorded. Clinical outcomes were evaluated using the JOA scoring system, Neck Disability Index and Odom's criteria. The cervical lordosis, subsidence and cervical fusion status were assessed by X-ray and computed tomography. RESULTS: The mean follow-up period was 39.7 months in the cage group and 42.2 months in the plate group. The operative time, intraoperative blood loss, postoperative dysphagia, sore throat and adjacent segment degeneration in the cage group were significantly less than those in the plate group (p < 0.05). All the patients in both groups achieved complete interbody fusion. Postoperative JOA and NDI scores in both groups were obviously improved compared with the preoperative ones. The postoperative cervical lordosis was effectively restored in both groups. CONCLUSIONS: The self-locking stand-alone cage for ACDF could effectively restore the cervical physiological curvature, cause few complications, and lead to satisfactory outcomes. Therefore, it could be used as an effective and reliable treatment for the CDDD.

Stiffness Matters: Part II-The Effects of Plate Stiffness on Load-Sharing and the Progression of Fusion Following Anterior Cervical Discectomy and Fusion In Vivo.

STUDY DESIGN: Real time in vivo measurement of forces in the cervical spine of goats following anterior cervical discectomy and fusion (ACDF). OBJECTIVE: To measure interbody forces in the cervical spine during the time course of fusion following ACDF with plates of different stiffnesses. SUMMARY OF BACKGROUND DATA: Following ACDF, the biomechanics of the arthrodesis is largely dictated by the plate. The properties of the plate prescribe the extent of load-sharing through the disc space versus the extent of stress-shielding. Load-sharing promotes interbody bone formation and stress-shielding can inhibit maturation of bone. However, these principles have never been validated in vivo. Measuring in vivo biomechanics of the cervical spine is critical to understanding the complex relationships between implant design, interbody loading, load-sharing, and the progression of fusion. METHODS: Anterior cervical plates of distinct bending stiffnesses were placed surgically following ACDF in goats. A validated custom force-sensing interbody implant was placed in the disc space to measure load-sharing in the spine. Interbody loads were measured in vivo in real time during the course of fusion for each plate. RESULTS: Interbody forces during flexion/extension were highly dynamic. In animals that received high stiffness plates, maximum forces were in extension whereas in animals that received lower stiffness plates, maximum forces were in flexion. As fusion progressed, interbody load magnitude decreased. CONCLUSION: The magnitude of interbody forces in the cervical spine is dynamic and correlates to activity and posture of the head and neck. The magnitude and consistency of forces in the interbody space correlates to plate stiffness with more compliant plates resulting in more consistent load-sharing. The magnitude of interbody forces decreases as fusion matures suggesting that smart interbody implants may be used as a diagnostic tool to indicate the progression of interbody fusion. LEVEL OF EVIDENCE: N/A.

Sagittal plane parameters in growing rod patients following final fusion.

Almost half of growing rod (GR) patients that undergo final fusion (FF) have an extension of instrumented levels. The purpose of this study was to review sagittal plane radiographic parameters of patients with distal extension of instrumented levels at FF to those whose levels remained the same. Radiographs were assessed preoperatively, after GR insertion/first lengthening, following GR treatment before FFs, and after FF. Measurements included sagittal balance, lumbar lordosis, thoracic kyphosis, and distal junction angle (DJA). Twenty-one patients were included. There was no change in sagittal balance. There was a significant decrease in lordosis and kyphosis following initial GR implantation. Kyphosis and lordosis increased during the GR period, but remained unchanged at time of FF. DJA increased 8° on average. Seven patients had distal extension of instrumented levels at time of FF (average 2 levels, range: 1-4). Indication for distal extension was sagittal plane decompensation in four cases. When comparing patients who had distal extension at the time of FF to those whose levels remained the same, there was no difference in the change in sagittal balance, lordosis, or kyphosis. Final DJA was significantly smaller in those patients with distal extension. Most GR patients that undergo FF demonstrate acceptable correction of sagittal plane radiographic parameters. A small cohort of patients requires distal extension at FF due to sagittal plane decompensation. LEVEL OF EVIDENCE: Level IV, Therapeutic.

Incidence and risk factors of hardware-related complications after proximal femoral osteotomy in children and adolescents.

Proximal femoral osteotomy has been used in cerebral palsy, Perthes disease, hip dysplasia, idiopathic femoral anteversion, and various hip diseases in children and adolescents. Conventionally, a blade plate (BP) has been used. However, the pediatric locking compression plate (LCP) has recently been applied widely. We compared the hardware-related complications of the BP and the LCP as well as the factors influencing these complications in patients who have undergone a proximal femoral osteotomy in children and adolescents. We enrolled consecutive patients aged less than or equal to 20 years who had undergone proximal femoral osteotomy with BP or LCP between May 2003 and December 2014, and who were followed up until 6 months after hardware removal. Following consensus building, hardware-related complications were identified from the patients' medical records and hip radiographs. Patient age, sex, type of plate, and Gross Motor Function Classification System (GMFCS) level in cerebral palsy patients were evaluated as possible risk factors, and a generalized estimating equation was used to assess the risk factors for hardware-related complications. A total of 417 hips from 251 patients were finally included in this study. Seven losses of fixation around the plate (five patients, 3.0%) occurred in the BP, three implant-related fractures (three patients, 3.6%) occurred in the LCP, and there was no significant difference (P=0.74). All hardware-related complications occurred in cerebral palsy patients, and the implant-related fractures occurred in patients with GMFCS IV/V. The risk of complications increased with age (P=0.002). The risk of loss of fixation around the BP is a well-known complication. However, LCP is not without hardware-related complications. The LCP provides strong stability of fixation. However, it is speculated that the LCP is related to implant-related fractures because of the stress shielding effect. Therefore, care should be exercised when using a locking plate in patients with osteoporosis, such as cerebral palsy with GMFCS IV/V. LEVEL OF EVIDENCE: Therapeutic Level III.

Risk factors for failure of revision total hip arthroplasty using a Kerboull-type acetabular reinforcement device.

BACKGROUND: The present study aimed to identify the risk factors associated with revision total hip arthroplasty (THA) failure using a Kerboull-type (KT) plate. METHODS: We analyzed 77 revision THAs using cemented acetabular components with a KT plate for aseptic loosening between May 2000 and March 2012. We examined the association of bone graft type, acetabular bone defects, age at the time of surgery, preoperative Japanese Orthopaedic Association (JOA) score, postoperative JOA hip score, and body mass index, with radiographic failure as the outcome. RESULTS: The 7.4-year radiographic failure survival rate was 81.6%. The survival rate was significantly different between the beta-tricalcium phosphate (ß-TCP) group and the bulk allograft group (p = 0.019). The survival curves were also significantly different between the ß-TCP group and bulk allograft group (p = 0.036). American Academy of Orthopaedic Surgeons type IV was significantly associated with radiographic failure (odds ratio [OR]: 15.5, 95% confidence interval [CI]: 1.4-175.4; p = 0.032). CONCLUSIONS: The midterm outcomes of revision THA indicate that type of bone graft and bone defect size may affect radiographic survival rate when using a KT plate.

Comparison of outcomes according to fixation technique following the modified Ludloff osteotomy for hallux valgus in patients with rheumatoid arthritis.

BACKGROUND: Clinical and radiological outcomes including fixation stability of osteotomy site were compared in rheumatoid arthritis (RA) patients who underwent modified Ludloff osteotomy to correct hallux valgus with osteotomy site fixation using two screws versus those who underwent additional fixation using a plate. METHODS: The fixation technique performed with two screws was used to fix the osteotomy sites following modified Ludloff osteotomy in 15 patients (15 feet, Group S), while the augmented plate fixation technique was used in 14 patients (16 feet, Group P). Surgical outcomes were analysed using the American Orthopedic Foot and Ankle Society (AOFAS) scores, and radiologic parameters measured before surgery and during follow-up examinations. To evaluate the stability of each osteotomy site fixation technique, the 1-2 inter-metatarsal angle (IMA) and angle of the altered margin of the lateral cortex (AMLC) were measured immediately and 6 weeks after surgery, and variations in the angles were compared. In addition, bone mineral density (BMD) values were compared between patients with correction loss at the osteotomy site and those with no loss of correction. RESULTS: No significant differences between groups were found for total AOFAS scores before surgery and at the final follow-up. However, significant differences were observed in the 1-2 IMA, beginning at 6 weeks postoperatively and continuing through the final follow-up. The 1-2 IMA and angle of AMLC measured immediately after and 6 weeks after surgery showed significantly greater variation in Group S than in Group P. In Group S, patients with correction loss (5 feet) at osteotomy site showed significantly lower BMD values than those with no loss of correction (10 feet). Despite the lower BMD values of patients in Group P than in Group S, a loss of correction did not occur in these patients. CONCLUSIONS: Correction loss occurred at the osteotomy site within 6 weeks postoperatively in patients who underwent fixation using only the two-screw fixation technique following modified Ludloff osteotomy; such loss could be reduced using the augmented plate fixation technique even in patients with osteoporosis.

Return to sports after plate fixation of humeral head fractures 65 cases with minimum 24-month follow-up.

BACKGROUND: Humeral head fractures requiring surgical intervention are severe injuries, which might affect the return to sports and daily activities. We hypothesize that athletic patients will be constrained regarding their sporting activities after surgically treated humeral head fractures. Despite a long rehabilitation program physical activities will change and an avoidance of overhead activities will be noticed. METHODS: Case series with 65 Patients, with a minimum follow-up of 24 months participated in this study. All patients were treated using a locking plate fixation. Their sporting activity was investigated at the time of the injury and re-investigated after an average of 3.83 years. The questionnaire setup included the evaluation of shoulder function, sporting activities, intensity, sport level and frequency evaluation. Level of evidence IV. RESULTS: At the time of injury 61 Patients (94%) were engaged in recreational sporting activities. The number of sporting activities declined from 26 to 23 at the follow-up examination. There was also a decline in sports frequency and duration of sports activities. CONCLUSION: The majority of patients remains active in their recreational sporting activity at a comparable duration and frequency both pre- and postoperatively. Nevertheless, shoulder centered sport activities including golf, water skiing and martial arts declined or were given up.

Mid-term outcome following revision surgery of clavicular non- and malunion using anatomic locking compression plate and iliac crest bone graft.

BACKGROUND: Treatment of clavicular non- and malunion is still challenging. Current surgical procedures often result in frustrating functional outcome along with high-grade subjective impairment and increased rates of revision surgery. However, the combination of biological augmentation with vital bone graft and a biomechanically sufficient fixation system seems to be a promising concept of treatment. METHODS: In this retrospective study, 14 patients with a mean age of 44 years (26-67 years) suffering from non-union (n = 11) and/or malunion (n = 3) of the clavicle were enrolled. All patients were surgically treated using an anatomical precontoured locking compression plate (LCP) and autologous iliac crest bone graft. Functional outcome was assessed using the age- and sex-specific relative Constant Score. RESULTS: Mean follow-up was 27 months (range 12-44 months). The relative Constant Score significantly improved from preoperative 61 ± 8 (43-72) to 82 ± 10 (65-100) points at the final follow-up examination (p < 0.05). All patients showed bony union radiographically. One patient presented with a re-fracture of the clavicle nearly 3 years after revision surgery and 5 weeks after implant removal. Secondary fractures at the donor site of the anterior superior iliac spine were recorded in two patients. CONCLUSIONS: Iliac crest bone graft and anatomic locking plate fixation allow for a safe and adequate stabilization and radiographical bony union in non- and malunions of the clavicle with a high degree of patient satisfaction. However, secondary fractures of the anterior superior iliac spine constitute relevant complications and the time of hardware removal should be considered carefully.