Combined assessment of lysine and N-acetyl cadaverine levels assist as a potential biomarker of the smoker periodontitis.

Periodontitis is an inflammatory condition of supporting structures of teeth leading to attachment and bone loss. Cigarette smoking is the single most important and modifiable risk factor with 5 to 20-fold susceptibility for periodontal diseases. Reverse smoking is a peculiar habit of smoking where the lit end is kept inside the mouth, which is predominant in the northern coastal districts of Andhra Pradesh. Polyamines are biologically active amines involved in tissue regeneration and modulation of inflammation. The study aimed to evaluate polyamines and check their utility as a marker in detection of periodontitis among different groups. Total polyamine levels showed significant increase in reverse smokers with periodontitis when compared to the other groups. Qualitative analysis by thin layer chromatography showed three polyamine bands with varying intensity among the different groups. Mass spectrometric and NMR analyses of the three bands identified them as N1, N8-diacetyl spermidine, N-acetyl cadaverine and lysine. Most significantly elevated levels of lysine was observed in the smoker and reverse smoker periodontitis groups when compared to healthy and non-smoker periodontitis groups. The significantly elevated levels of N-acetyl cadaverine could be responsible for the more destruction of periodontium in the reverse smoker group. Antioxidant potential decreased significantly in different smoker periodontitis groups. The present study suggests that the quantitative analysis of salivary polyamines, lysine and N-acetyl cadaverine can aid as an easy noninvasive diagnostic method for assessing the periodontal status, especially in smokers.

The effects of Lactiplantibacillus plantarum 3-19 and Pediococcus pentosaceus 18-1 on preventing the accumulation of biogenic amines and promoting the production of volatile organic compounds during sour meat fermentation.

Lactic acid bacteria (LAB) are frequently used in meat fermentation, and mixed stater cultures are reported to perform better than single ones. Lactiplantibacillus plantarum 3-19 and Pediococcus pentosaceus 18-1 were chosen from 28 sour-meat-origin strains to examine the effects of single and combined inoculation on sour meat quality. Natural fermentation was used as a control to investigate changes in pH, water activity (aw), amino acid nitrogen (AN), texture, microbial diversity, and volatile organic compounds (VOCs) during fermentation. The pH and aw of each inoculation group were significantly decreased, and AN content was significantly increased. The inoculation of P. pentosaceus 18-1 significantly reduced putrescine, cadaverine, and tryptamine content (p < 0.05), while the inoculation of Lpb. plantarum 3-19 significantly reduced cadaverine amounts (p < 0.05). At the fermentation endpoint, the total biogenic amines content in the C group was 992.96 ± 14.07, which was 1.65, 2.57, and 3.07 times higher than that in the Lp, Pe, and M groups, respectively. The mixed inoculation group combined the advantages of both strains and decreased total biogenic amines most significantly. At the end of fermentation, the VOCs in C, Lp, Pe, and M groups were 10.11, 11.56, 12.45, and 13.39 times higher than those at the beginning of fermentation. Inoculation promoted the production of key VOCs (OAV > 2000) such as heptanal, octanal, and (E)-2-nonanal. The mixed inoculation group had the highest variety and content of VOCs and the highest content of the above key VOCs, significantly enhancing its fruity, floral, ester, and other aromas. Sensory evaluation indicated that the M group had the best overall acceptability. Finally, it was suggested that a combination of Lpb. plantarum 3-19 and P. pentosaceus 18-1 is a novel and efficient starter culture for processing sour meat since they lower the amounts of biogenic amines in the meat and promote the production of VOCs.

Fine-Tuning Pyridoxal 5'-Phosphate Synthesis in Escherichia coli for Cadaverine Production in Minimal Culture Media.

Cadaverine is a critical C5 monomer for the production of polyamides. Pyridoxal 5'-phosphate (PLP), as a crucial cofactor for the key enzyme lysine decarboxylase in the cadaverine biosynthesis pathway, has seen a persistent shortage, leading to limitations in cadaverine production. To address this issue, a dual-pathway strategy was implemented, synergistically enhancing both endogenous and heterologous PLP synthesis modules and resulting in improved PLP synthesis. Subsequently, a growth-stage-dependent molecular switch was introduced to balance the precursor competition between PLP synthesis and cell growth. Additionally, a PLP sensor-based negative feedback circuit was constructed by integrating a newly identified PLP-responsive promoter PygjH and an arabinose-regulated system, dynamically regulating the expression of the PLP synthetic genes and preventing excessive intracellular PLP accumulation. The optimal strain, L18, cultivated in the minimal medium AM1, demonstrated cadaverine production with a titer, yield, and productivity of 64.03 g/L, 0.23 g/g glucose, and 1.33 g/L/h, respectively. This represents the highest titer reported to date in engineered Escherichia coli by fed-batch fermentation in a minimal medium.

Combining directed evolution with high cell permeability for high-level cadaverine production in engineered Escherichia coli.

The biosynthesis of cadaverine from lysine is an environmentally promising technology, that could contribute to a more sustainable approach to manufacturing bio-nylon 5X. However, the titer of biosynthesized cadaverine has still not reached a sufficient level for industrial production. A powerful green cell factory was developed to enhance cadaverine production by regulating lipopolysaccharide (LPS) genes and improving membrane permeability. Firstly, 10 LPS mutant strains were constructed and the effect on the growth was investigated. Then, the lysine decarboxylase (CadA) was overexpressed in 10 LPS mutant strains of Escherichia coli MG1655 and the ability to produce cadaverine was compared. Using 20.0 g L-1 of L-lysine hydrochloride (L-lysine-HCl) as the substrate for the biotransformation reaction, Cad02 and Cad06 strains exhibited high production levels of cadaverine, with 8.95 g L-1 and 7.55 g L-1 respectively while the control strain Cad00 only 4.92 g L-1 . Directed evolution of CadA was also used to improve its stability under alkaline conditions. The cadaverine production of the Cad02-M mutant stain increased by 1.86 times at pH 8.0. Finally, the production process was scaled up using recombinant whole cells as catalysts, achieving a high titer of 211 g L-1 cadaverine (96.8%) by fed-batch bioconversion. This study demonstrates the potential role of LPS in enhancing the efficiency of mass transfer between substrate and enzymes in vivo by increasing cell permeability. The results indicate that the argumentation of cell permeability could not only significantly enhance the biotransformation efficiency of cadaverine, but also provide a universally applicable, straightforward, environment-friendly, and cost-effective method for the biosynthesis of other high-value chemicals.

Engineering RuBisCO-based shunt for improved cadaverine production in Escherichia coli.

The process of biological fermentation is often accompanied by the release of CO2, resulting in low yield and environmental pollution. Refixing CO2 to the product synthesis pathway is an attractive approach to improve the product yield. Cadaverine is an important diamine used for the synthesis of bio-based polyurethane or polyamide. Here, aiming to increase its final production, a RuBisCO-based shunt consisting of the ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) and phosphoribulate kinase (PRK) was expressed in cadaverine-producing E. coli. This shunt was calculated capable of increasing the maximum theoretical cadaverine yield based on flux model analysis. When a functional RuBisCO-based shunt was established and optimized in E. coli, the cadaverine production and yield of the final engineered strain reached the highest level, which were 84.1 g/L and 0.37 g/g Glucose, respectively. Thus, the design of in situ CO2 fixation provides a green and efficient industrial production process.

Alleviation role of exogenous cadaverine on cell cycle, endogenous polyamines amounts and biochemical enzyme changes in barley seedlings under drought stress.

Cadaverine (Cad), which has an independent synthesis pathway compared to other polyamine (PA) types, contributes to the health of plants by regulating plant growth and development, abiotic stress tolerance and antioxidant defense mechanisms. In this work, experiments were carried out to understand the effects of exogenous Cad (10 µM) application under drought stress (%22 PEG 6000) and without stress on cell cycle, total protein content, endogenous PA levels, and biochemical enzyme activities in barley (Hordeum vulgare cv. Burakbey) considering the potential of Cad to stimulate the drought-related tolerance system. Cad application in a stress-free environment showed an effect almost like low-impact drought stress, causing changes in all parameters examined compared to samples grown in distilled water environment (Control). The results clearly show that Cad applied against the negative effects of drought stress on all parameters creates a drought resistance mechanism of the plant. Accordingly, Cad applied together with drought stress increased the density of cells in the cell cycle (G1-S and S-G2 phases) and the amount of endogenous (spermidine 10% and spermine 40%) PAs. In addition, while superoxide dismutase (SOD) (5%), (CAT) (55%) and ascorbate peroxidase (APX) (18%) enzyme levels increased, a stress response mechanism occurred due to the decrease in total protein content (20%) and malondialdehyde (MDA) (80%). As a result, exogenous application of 10 µM Cad showed that it reduced the negative effects of drought stress on endogenous PA amounts, cell division and biochemical activities in barley.

A Blue Light-Responsive Strong Synthetic Promoter Based on Rational Design in Chlamydomonas reinhardtii.

Chlamydomonas reinhardtii (C. reinhardtii) is a single-cell green alga that can be easily genetically manipulated. With its favorable characteristics of rapid growth, low cost, non-toxicity, and the ability for post-translational protein modification, C. reinhardtii has emerged as an attractive option for the biosynthesis of various valuable products. To enhance the expression level of exogenous genes and overcome the silencing of foreign genes by C. reinhardtii, synthetic promoters such as the chimeric promoter AR have been constructed and evaluated. In this study, a synthetic promoter GA was constructed by hybridizing core fragments from the natural promoters of the acyl carrier protein gene (ACP2) and the glutamate dehydrogenase gene (GDH2). The GA promoter exhibited a significant increase (7 times) in expressing GUS, over the AR promoter as positive control. The GA promoter also displayed a strong responsiveness to blue light (BL), where the GUS expression was doubled compared to the white light (WL) condition. The ability of the GA promoter was further tested in the expression of another exogenous cadA gene, responsible for catalyzing the decarboxylation of lysine to produce cadaverine. The cadaverine yield driven by the GA promoter was increased by 1-2 times under WL and 2-3 times under BL as compared to the AR promoter. This study obtained, for the first time, a blue light-responsive GDH2 minimal fragment in C. reinhardtii, which delivered a doubling effect under BL when used alone or in hybrid. Together with the strong GA synthetic promoter, this study offered useful tools of synthetic biology to the algal biotechnology field.

Specific Gene Expression in Pseudomonas Putida U Shows New Alternatives for Cadaverine and Putrescine Catabolism.

Pseudomonas putida strain U can be grown using, as sole carbon sources, the biogenic amines putrescine or cadaverine, as well as their catabolic intermediates, ɣ-aminobutyrate or δ-aminovalerate, respectively. Several paralogs for the genes that encode some of the activities involved in the catabolism of these compounds, such as a putrescine-pyruvate aminotransferase (spuC1 and spuC2 genes) and a ɣ-aminobutyrate aminotransferase (gabT1 and gabT2 genes) have been identified in this bacterium. When the expression pattern of these genes is analyzed by qPCR, it is drastically conditioned by supplying the carbon sources. Thus, spuC1 is upregulated by putrescine, whereas spuC2 seems to be exclusively induced by cadaverine. However, gabT1 increases its expression in response to different polyamines or aminated catabolic derivatives from them (i.e., ɣ-aminobutyrate or δ-aminovalerate), although gabT2 does not change its expression level concerning no-amine unrelated carbon sources (citrate). These results reveal differences between the mechanisms proposed for polyamine catabolism in P. aeruginosa and Escherichia coli concerning P. putida strain U, as well as allow a deeper understanding of the enzymatic systems used by this last strain during polyamine metabolism.

Investigation of enzymatic quality and quantity using pyridoxal 5'-phosphate (PLP) regeneration system as a decoy in Escherichia coli.

Pyridoxal 5'-phosphate (PLP), an essential cofactor for multiple enzymes, was used as a protein decoy to prompt enzyme expression and activity for the first time. The best chassis, denoted as WJK, was developed using a pyridoxal kinase (PdxK) and integrated at the HK022 phage attack site of Escherichia coli W3110. When compared with the original strain, the amount and activity of lysine decarboxylase (CadA) in WJK were significantly increased by 100 % and 120 %, respectively. When supplementary nineteen amino acids as second carbon source, cell growth and protein trade-off were observed. The transcriptional levels of genes from glycolysis to TCA cycle, adhE, argH and gdhA were dominating and redirected more flux into α-ketoglutarate, thus facilitated cell growth. Stepwise improvement was conducted with pyridoxal and nitrogen-rich medium; hence, CadA activity was increased to 60 g-cadaverine/g-dry cell weight/h. By reutilizing the whole-cell biocatalysts in two repeated reactions with the supplementation of fresh cells, a total cadaverine of 576 g/L was obtained even without additional PLP. Notably, PLP decoy augment the enzymatic activities of 5-aminolevulinic acid synthase and glutamate/lysine/arginine decarboxylases by over 100 %. Finally, a conserved PLP-binding pocket, Ser-His-Lys, was identified as a vital PLP sponge site that simultaneously improved protein quality and quantity.

A direct enzymatic evaluation platform (DEEP) to fine-tuning pyridoxal 5'-phosphate-dependent proteins for cadaverine production.

Pyridoxal 5'-phosphate (pyridoxal phosphate, PLP) is an essential cofactor for multiple enzymatic reactions in industry. However, cofactor engineering based on PLP regeneration and related to the performance of enzymes in chemical production has rarely been discussed. First, we found that MG1655 strain was sensitive to nitrogen source and relied on different amino acids, thus the biomass was significantly reduced when PLP excess in the medium. Then, the six KEIO collection strains were applied to find out the prominent gene in deoxyxylulose-5-phosphate (DXP) pathway, where pdxB was superior in controlling cell growth. Therefore, the clustered regularly interspaced short palindromic repeats interference (CRISPRi) targeted on pdxB in MG1655 was employed to establish a novel direct enzymatic evaluation platform (DEEP) as a high-throughput tool and obtained the optimal modules for incorporating of PLP to enhance the biomass and activity of PLP-dependent enzymes simultaneously. As a result, the biomass has increased by 55% using PlacI promoter driven pyridoxine 5'-phosphate oxidase (PdxH) with a trace amount of precursor. When the strains incorporated DEEP and lysine decarboxylase (CadA), the cadaverine productivity was increased 32% due to the higher expression of CadA. DEEP is not only feasible for high-throughput screening of the best chassis for PLP engineering but also practical in fine-tuning the quantity and quality of enzymes.

Molecular cloning, expression, and functional analysis of copper amine oxidase gene from mulberry (Morus alba L.).

In this study, we investigated a key enzyme encoded by the gene copper amine oxidase (MaCAO), which is involved in the biosynthetic pathway of 1-deoxynojirimycin (DNJ)1, an active ingredient in mulberry leaves. The 1680 bp long MaCAO was successfully cloned (GenBank accession no: MH205733). Subsequently, MaCAO was heterologously expressed using a recombinant plasmid, pET-22b (+)/MaCAO in Escherichia coli BL21 (DE3). A protein with a molecular mass of 62.9 kDa was obtained, whose function was validated through enzymatic reaction. Bioinformatics analysis identified that MaCAO contained the same conserved domain as that of copper amine oxidases ("NYDY"). Furthermore, the tertiary structure of the predicted protein using homology modeling revealed 46% similarity with that of copper amine oxidase (Protein Data Bank ID: 1W2Z). Gas chromatography-mass spectrometry analysis of the enzymatic reaction revealed that MaCAO could catalyze 1,5-pentanediamine to produce 5-aminopentanal. Additionally, levels of mulberry leaf DNJ content were significantly positively correlated with expression levels of MaCAO (P < 0.001). Our results conclude that MaCAO is the key enzyme involved in the biosynthetic pathway of DNJ. The function of MaCAO is validated, providing a foundation for the further analysis of biosynthetic pathways of DNJ in mulberry leaves using tools of synthetic biology.

Metabolic engineering of Escherichia coli for high production of 1,5-pentanediol via a cadaverine-derived pathway.

1,5-Pentanediol (1,5-PDO) is a high value-added chemical which is widely used as a monomer in the polymer industry. There are no natural organisms that could directly produce 1,5-PDO from renewable carbon sources. In this study, we report metabolic engineering of Escherichia coli for high-level production of 1,5-PDO from glucose via a cadaverine-derived pathway. In the newly proposed pathway, cadaverine can be converted to 1,5-PDO via 5-hydroxyvalerate (5-HV) by introducing only one heterologous enzyme in E. coli. Different endogenous genes of E. coli were screened and heterologous carboxylic acid reductase genes were tested to build a functional pathway. Compared to the previously reported pathways, the engineered cadaverine-based pathway has a higher theoretical yield (0.70 mol/mol glucose) and higher catalytic efficiency. By further combining strategies of pathway engineering and process engineering, we constructed an engineered E. coli strain that could produce 2.62 g/L 1,5-PDO in shake-flask and 9.25 g/L 1,5-PDO with a yield of 0.28 mol/mol glucose in fed-batch fermentation. The proposed new pathway and engineering strategies reported here should be useful for developing biological routes to produce 1,5-PDO for real application.

Identification of the BolA Protein Reveals a Novel Virulence Factor in K. pneumoniae That Contributes to Survival in Host.

BolA has been characterized as an important transcriptional regulator, which is induced in the stationary phase of growth and is often associated with bacterial virulence. This study was initiated to elucidate the role of the BolA in the virulence of K. pneumoniae. Using a mouse infection model, we revealed bolA mutant strain yielded significantly decreased bacterial loads in the liver, spleen, lung, and kidney, and failed to form liver abscesses. Gene deletion demonstrated that the bolA was required for siderophore production, biofilm formation, and adhesion to human colon cancer epithelial cells HCT116. Quantitative reverse transcriptase PCR (RT-qPCR) indicated that BolA could impact the expression of pulK, pulF, pulE, clpV, vgrG, entE, relA, and spoT genes on a genome-wide scale, which are related to type II secretion system (T2SS), type VI secretion system (T6SS), guanosine tetraphosphate (ppGpp), and siderophore synthesis and contribute to fitness in the host. Furthermore, the metabolome analysis showed that the deletion of the bolA gene led to decreased pools of five metabolites: biotin, spermine, cadaverine, guanosine, and flavin adenine dinucleotide, all of which are involved in pathways related to virulence and stress resistance. Taken together, we provided evidence that BolA was a significant virulence factor in the ability of K. pneumoniae to survive, and this was an important step in progress to an understanding of the pathways underlying bacterial virulence. IMPORTANCE BolA has been characterized as an important transcriptional regulator, which is induced in the stationary phase of growth and affects different pathways directly associated with bacterial virulence. Here, we unraveled the role of BolA in several phenotypes associated with the process of cell morphology, siderophore production, biofilm formation, cell adhesion, tissue colonization, and liver abscess. We also uncovered the importance of BolA for the success of K. pneumoniae infection and provided new clues to the pathogenesis strategies of this organism. This work constitutes a relevant step toward an understanding of the role of BolA protein as a master regulator and virulence factor. Therefore, this study is of great importance for understanding the pathways underlying K. pneumoniae virulence and may contribute to public health care applications.

Reduction of biogenic amines formation by foodborne pathogens using postbiotics in lysine-decarboxylase broth.

Postbiotics is a novel term proposed to describe as a set of bioactive compounds obtained from beneficial microorganisms. In this work, postbiotics from four lactic acid bacteria (LAB) including Leuconostoc mesenteroides subsp. cremoris, Pediococcus acidilactici, Lactococcus lactis subsp. lactis and Streptococcus thermophilus were prepared in MRS broth. The antimicrobial properties and organic acids content of postbiotics were also investigated. Postbiotics were used to tentatively reduce the production of biogenic amines by foodborne pathogens (i.e., Salmonella paratyphi A and Escherichia coli) on lysine decarboxylase broth (LDB). Experimental data showed that acetic, propionic, and butyric acids were in the range of 387.51-709.21 mg/L, 0.00-1.28 mg/L, and 0.00-20.98 mg/L, respectively. The inhibition zone of postbiotics on E. coli and S. paratyphi A were 11.67, and 12.33 mm, respectively. Two different levels of postbiotics (25%, and 50%) were used in LDB to measure the diamines (cadaverine and putrescine), polyamines (agmatine, spermidine, and spermine, ammonia), and other biogenic amine formation by pathogens. E. coli produced cadaverine and putrescine with concentrations of 1072.21 and 1114.18 mg/L, respectively. The postbiotics reduced cadaverine formation by 67% in E. coli, and cadaverine production was mostly suppressed by postbiotics from P. acidilactici in E. coli (97%) and L. lactis subsp. lactis in S. paratyphi A (90%). Putrescine production by E. coli was reduced by 94% with postbiotics of P. acidilactici at a concentration of 25%, whereas putrescine production by S. paratyphi A has been decreased by 61% in the presence of postbiotics from L. lactis subsp. Lactis with a 25% concentration. The results revealed that an increase in postbiotics concentration (from 25% to 50%) in LDB may lead to synergistic effects, resulting from the production of biogenic amines by microbial pathogens. It was importantly concluded that postbiotics of LAB may degrade biogenic amines or prevent their formation by foodborne pathogens.

Simultaneous carbon dioxide sequestration and utilization for cadaverine production using dual promoters in engineered Escherichia coli strains.

Human carbonic anhydrase II (hCAII) is a rapid-acting zinc-metalloenzyme that catalyzes CO2 hydration reversibly, with encouraging applications in carbon capture, sequestration, and utilization (CCSU). However, biocatalyst durability is a major challenge. Herein, hCAII is emphasized in 4 different Escherichia coli strains and designated under dual promoters from sigma factor 70 (σ70) and heat shock protein (HSP70A) to suppress the usage of inducer and stimulate activity in heat environments. As a result, hCAII under high-efficient dual promoters regulation retained high residual activity in CO2 biomineralization of 68.8 % after 4 cycles at 40 °C. Moreover, co-expression of CAC9 with lysine decarboxylase (CadA) simultaneously sequestered CO2 release up to 95.7 % and increased cadaverine titer from 18.0 to 36.7 g/L by using E. coli MG1655. The remnant biomass from cadaverine synthesis sustained converting CO2 to 57.9 mg-CaCO3. Thus, the dual promoters design demonstrated the promising potential for CCSU through simultaneous CO2 utilization and cadaverine synthesis.

An acyl-adenylate mimic reveals the structural basis for substrate recognition by the iterative siderophore synthetase DesD.

Siderophores are conditionally essential metabolites used by microbes for environmental iron sequestration. Most Streptomyces strains produce hydroxamate-based desferrioxamine (DFO) siderophores composed of repeating units of N1-hydroxy-cadaverine (or N1-hydroxy-putrescine) and succinate. The DFO biosynthetic operon, desABCD, is highly conserved in Streptomyces; however, expression of desABCD alone does not account for the vast structural diversity within this natural product class. Here, we report the in vitro reconstitution and biochemical characterization of four DesD orthologs from Streptomyces strains that produce unique DFO siderophores. Under in vitro conditions, all four DesD orthologs displayed similar saturation steady-state kinetics (Vmax = 0.9-2.5 µM⋅min-1) and produced the macrocyclic trimer DFOE as the favored product, suggesting a conserved role for DesD in the biosynthesis of DFO siderophores. We further synthesized a structural mimic of N1-hydroxy-N1-succinyl-cadaverine (HSC)-acyl-adenylate, the HSC-acyl sulfamoyl adenosine analog (HSC-AMS), and obtained crystal structures of DesD in the ATP-bound, AMP/PPi-bound, and HSC-AMS/Pi-bound forms. We found HSC-AMS inhibited DesD orthologs (IC50 values = 48-53 µM) leading to accumulation of linear trimeric DFOG and di-HSC at the expense of macrocyclic DFOE. Addition of exogenous PPi enhanced DesD inhibition by HSC-AMS, presumably via stabilization of the DesD-HSC-AMS complex, similar to the proposed mode of adenylate stabilization where PPi remains buried in the active site. In conclusion, our data suggest that acyl-AMS derivatives may have utility as chemical probes and bisubstrate inhibitors to reveal valuable mechanistic and structural insight for this unique family of adenylating enzymes.

Engineered Halomonas spp. for production of l-Lysine and cadaverine.

Cadaverine, a derivative of l-lysine, has been used as a monomer for the synthesis of bio-based nylon-5,6. This study engineered Halomonas bluephagenesis TD1.0 by blocking the feedback inhibition, overexpressing the key l-lysine synthesis genes, strengthening the l-lysine export system and increasing the supply of oxaloacetate for production of l-lysine in the supernatant and PHB in the cells. Subsequently, cadaverine biosynthetic pathway was constructed in H. campaniensis LC-9 to improve the efficiency of de novo cadaverine biosynthesis which combines l-lysine producing H. bluephagenesis TDL8-68-259 and cadaverine producing H. campaniensis LC-9-ldcC-lysP. When H. campaniensis LC-9-ldcC-lysP was used as a whole cell catalysis for cadaverine production, the conversion efficiency of l-lysine to cadaverine reached 100% in the presence of 0.05% Triton X-100 for cell membrane permeability enhancement, resulting in 118 g L-1 cadaverine formed in the fermentor. Thus, Halomonas spp. have been successfully constructed for l-lysine and cadaverine production.

[Molecular engineering and immobilization of lysine decarboxylase for synthesis of 1, 5-diaminopentane: a review].

1, 5-diaminopentane, also known as cadaverine, is an important raw material for the production of biopolyamide. It can be polymerized with dicarboxylic acid to produce biopolyamide PA5X whose performances are comparable to that of the petroleum-based polyamide materials. Notably, biopolyamide uses renewable resources such as starch, cellulose and vegetable oil as substrate. The production process does not cause pollution to the environment, which is in line with the green and sustainable development strategy. The biosynthesis of 1, 5-diaminopentane mainly includes two methods: the de novo microbial synthesis and the whole cell catalysis. Lysine decarboxylase as the key enzyme for 1, 5-diaminopentane production, mainly includes an inducible lysine decarboxylase CadA and a constituent lysine decarboxylase LdcC. Lysine decarboxylase is a folded type Ⅰ pyridoxal-5' phosphate (PLP) dependent enzyme, which displays low activity and unstable structure, and is susceptible to deactivation by environmental factors in practical applications. Therefore, improving the catalytic activity and stability of lysine decarboxylase has become a research focus in this field, and molecular engineering and immobilization are the mainly approaches. Here, the mechanism, molecular engineering and immobilization strategies of lysine decarboxylase were reviewed, and the further strategies for improving its activity and stability were also prospected, with the aim to achieve efficient production of 1, 5-diaminopentane.

Molecular engineering and immobilization of lysine decarboxylase for synthesis of 1, 5-diaminopentane: a review / 生物工程学报

1, 5-diaminopentane, also known as cadaverine, is an important raw material for the production of biopolyamide. It can be polymerized with dicarboxylic acid to produce biopolyamide PA5X whose performances are comparable to that of the petroleum-based polyamide materials. Notably, biopolyamide uses renewable resources such as starch, cellulose and vegetable oil as substrate. The production process does not cause pollution to the environment, which is in line with the green and sustainable development strategy. The biosynthesis of 1, 5-diaminopentane mainly includes two methods: the de novo microbial synthesis and the whole cell catalysis. Lysine decarboxylase as the key enzyme for 1, 5-diaminopentane production, mainly includes an inducible lysine decarboxylase CadA and a constituent lysine decarboxylase LdcC. Lysine decarboxylase is a folded type Ⅰ pyridoxal-5' phosphate (PLP) dependent enzyme, which displays low activity and unstable structure, and is susceptible to deactivation by environmental factors in practical applications. Therefore, improving the catalytic activity and stability of lysine decarboxylase has become a research focus in this field, and molecular engineering and immobilization are the mainly approaches. Here, the mechanism, molecular engineering and immobilization strategies of lysine decarboxylase were reviewed, and the further strategies for improving its activity and stability were also prospected, with the aim to achieve efficient production of 1, 5-diaminopentane.

Systematic Engineering of Synechococcus elongatus UTEX 2973 for Photosynthetic Production of l-Lysine, Cadaverine, and Glutarate.

Amino acids and related targets are typically produced by well-characterized heterotrophs including Corynebacterium glutamicum and Escherichia coli. Cyanobacteria offer an opportunity to supplant these sugar-intensive processes by instead directly utilizing atmospheric CO2 and sunlight. Synechococcus elongatus UTEX 2973 (hereafter UTEX 2973) is a particularly promising photoautotrophic platform due to its fast growth rate. Here, we first engineered UTEX 2973 to overproduce l-lysine (hereafter lysine), after which both cadaverine and glutarate production were achieved through further pathway engineering. To facilitate metabolic engineering, the relative activities of a subset of previously uncharacterized promoters were investigated, in each case, while also comparing the effects of both chromosomal (from neutral site NS3) and episomal (from pAM4788) expressions. Using these parts, lysine overproduction in UTEX 2973 was engineered by introducing a feedback-resistant copy of aspartate kinase (encoded by lysCfbr) and a lysine exporter (encoded by ybjE), both from E. coli. While chromosomal expression resulted in lysine production up to just 325.3 ± 14.8 mg/L after 120 h, this was then increased to 556.3 ± 62.3 mg/L via plasmid-based expression, also surpassing prior reports of photoautotrophic lysine bioproduction. Lastly, additional products of interest were then targeted by modularly extending the lysine pathway to glutarate and cadaverine, two 5-carbon, bioplastic monomers. By this approach, glutarate has so far been produced at final titers reaching 67.5 ± 2.2 mg/L by 96 h, whereas cadaverine has been produced at up to 55.3 ± 6.7 mg/L. Overcoming pathway and/or transport bottlenecks, meanwhile, will be important to improving upon these initial outputs.