Automated region growing-based segmentation for trabecular bone structure in fresh-frozen human wrist specimens.

Bone strength depends on both mineral content and bone structure. Measurements of bone microstructure on specimens can be performed by micro-CT. In vivo measurements are reliably performed by high-resolution peripheral computed tomography (HR-pQCT) using dedicated software. In previous studies from our research group, trabecular bone properties on CT data of defatted specimens from many different CT devices have been analyzed using an Automated Region Growing (ARG) algorithm-based code, showing strong correlations to micro-CT.The aim of the study was to validate the possibility of segmenting and measuring trabecular bone structure from clinical CT data of fresh-frozen human wrist specimens. Data from micro-CT was used as reference. The hypothesis was that the ARG-based in-house built software could be used for such measurements.HR-pQCT image data at two resolutions (61 and 82 µm isotropic voxels) from 23 fresh-frozen human forearms were analyzed. Correlations to micro-CT were strong, varying from 0.72 to 0.99 for all parameters except trabecular termini and nodes. The bone volume fraction had correlations varying from 0.95 to 0.98 but was overestimated compared to micro-CT, especially at the lower resolution. Trabecular separation and spacing were the most stable parameters with correlations at 0.80-0.97 and mean values in the same range as micro-CT.Results from this in vitro study show that an ARG-based software could be used for segmenting and measuring 3D trabecular bone structure from clinical CT data of fresh-frozen human wrist specimens using micro-CT data as reference. Over-and underestimation of several of the bone structure parameters must however be taken into account.

Associations of marrow fat fraction with MR imaging based trabecular bone microarchitecture in first-time diagnosed type 1 diabetes mellitus.

Purpose: To determine whether there are alterations in marrow fat content in individuals first-time diagnosed with type 1 diabetes mellitus (T1DM) and to explore the associations between marrow fat fraction and MRI-based findings in trabecular bone microarchitecture. Method: A case-control study was conducted, involving adults with first-time diagnosed T1DM (n=35) and age- and sex-matched healthy adults (n=46). Dual-energy X-ray absorptiometry and 3 Tesla-MRI of the proximal tibia were performed to assess trabecular microarchitecture and vertebral marrow fat fraction. Multiple linear regression analysis was used to test the associations of marrow fat fraction with trabecular microarchitecture and bone density while adjusting for potential confounding factors. Results: In individuals first-time diagnosed with T1DM, the marrow fat fraction was significantly higher (p < 0.001) compared to healthy controls. T1DM patients also exhibited higher trabecular separation [median (IQR): 2.19 (1.70, 2.68) vs 1.81 (1.62, 2.10), p < 0.001], lower trabecular volume [0.45 (0.30, 0.56) vs 0.53 (0.38, 0.60), p = 0.013], and lower trabecular number [0.37 (0.26, 0.44) vs 0.41 (0.32, 0.47), p = 0.020] compared to controls. However, bone density was similar between the two groups (p = 0.815). In individuals with T1DM, there was an inverse association between marrow fat fraction and trabecular volume (r = -0.69, p < 0.001) as well as trabecular number (r = -0.55, p < 0.001), and a positive association with trabecular separation (r = 0.75, p < 0.001). Marrow fat fraction was independently associated with total trabecular volume (standardized ß = -0.21), trabecular number (ß = -0.12), and trabecular separation (ß = 0.57) of the proximal tibia after adjusting for various factors including age, gender, body mass index, physical activity, smoking status, alcohol consumption, blood glucose, plasma glycated hemoglobin, lipid profile, and bone turnover biomarkers. Conclusions: Individuals first-time diagnosed with T1DM experience expansion of marrow adiposity, and elevated marrow fat content is associated with MRI-based trabecular microstructure.

Age- and sex-related changes in vertebral trabecular bone architecture in Neolithic and Mediaeval populations from Poland.

This paper investigates trabecular bone ontogenetic changes in two different Polish populations, one prehistoric and the other historical. The studied populations are from the Brzesc Kujawski region in Kujawy (north-central Poland), one from the Neolithic Period (4500-4000 BC) and one from the Middle Ages (twelfth-sixteenth centuries AD), in total 62 vertebral specimens (32 males, 30 females). Eight morphometric parameters acquired from microCT scan images were analysed. Two-way ANOVA after Box-Cox transformation and multifactorial regression model were calculated. A significant decrease in percentage bone volume fraction (BV/TV; [%]) with age at death was observed in the studied sample; Tb.N (trabecular number) was also significantly decreased with age; trabecular separation (Tb.Sp) increased with advancing age; connectivity density (Conn.D) was negatively correlated with biological age and higher in the Neolithic population. These data are found to be compatible with data from the current biomedical literature, while no loss of horizontal trabeculae was recorded as would be expected based on modern osteoporosis.

Evaluation of the Correlation Between the Structural Parameters of Trabecular Bone in CBCT and the Primary Stability of Dental Implants.

PURPOSE: To investigate the relationship between the structural parameters of trabecular bone obtained from CBCT imaging and the primary stability of dental implants. MATERIALS AND METHODS: Sixty patients underwent implant placement followed by primary stability evaluation via measurement of the insertion torque (IT) and the implant stability quotient (ISQ). Gray values (GV) and the fractal dimension (FD) were also measured using pretreatment CBCT images. RESULTS: FD values showed a positive and significant relationship with ISQ and IT values (P = .017 and P = .004, respectively). Additionally, there was a positive and significant correlation between GV and IT (P = .004) as well as between GV and ISQ (P = .010). FD and GV showed a considerable difference between the maxillary and mandibular jaws and were higher in the mandible. Only FD was significantly different between men and women and was higher in men. In the two age groups (older and younger than 45 years), only GV was considerably higher in people older than 45 (P < .05). CONCLUSIONS: Both fractal dimension and gray values obtained from CBCT are efficient methods for predicting the primary stability of the implant due to their relationship with ISQ and IT values.

More accurate trabecular bone imaging using UTE MRI at the resonance frequency of fat.

High-resolution magnetic resonance imaging (HR-MRI) has been increasingly used to assess the trabecular bone structure. High susceptibility at the marrow/bone interface may significantly reduce the marrow's apparent transverse relaxation time (T2*), overestimating trabecular bone thickness. Ultrashort echo time MRI (UTE-MRI) can minimize the signal loss caused by susceptibility-induced T2* shortening. However, UTE-MRI is sensitive to chemical shift artifacts, which manifest as spatial blurring and ringing artifacts partially due to non-Cartesian sampling. In this study, we proposed UTE-MRI at the resonance frequency of fat to minimize marrow-related chemical shift artifacts and the overestimation of trabecular thickness. Cubes of trabecular bone from six donors (75 ± 4 years old) were scanned using a 3 T clinical scanner at the resonance frequencies of fat and water, respectively, using 3D UTE sequences with five TEs (0.032, 1.1, 2.2, 3.3, and 4.4 ms) and a clinical 3D gradient echo (GRE) sequence at 0.2 × 0.2 × 0.4 mm3 voxel size. Trabecular bone thickness was measured in 30 regions of interest (ROIs) per sample. MRI results were compared with thicknesses obtained from micro-computed tomography (µCT) at 50 µm3 voxel size. Linear regression models were used to calculate the coefficient of determination between MRI- and µCT-based trabecular thickness. All MRI-based trabecular thicknesses showed significant correlations with µCT measurements. The correlations were higher (examined with paired Student's t-test, P < 0.01) for 3D UTE images performed at the fat frequency (R2 = 0.59-0.74, P < 0.01) than those at the water frequency (R2 = 0.18-0.52, P < 0.01) and clinical GRE images (R2 = 0.39-0.47, P < 0.01). Significantly reduced correlations were observed with longer TEs. This study highlighted the feasibility of UTE-MRI at the fat frequency for a more accurate assessment of trabecular bone thickness.

Trabecular bone score (TBS) in Cushing's disease: TBS gain after hypercortisolism normalization.

CONTEXT: Hypercortisolism frequently induces trabecular bone loss, more pronounced at the lumbar spine, resulting in osteoporosis, and thus an increase in fracture risk. Several studies have shown bone mass recovery in patients with Cushing's disease (CD) after treatment. OBJECTIVE: To examine treatment effects on TBS (trabecular bone score) in addition to aBMD (areal bone mineral density) in a cohort of patients with CD. DESIGN AND SETTING: Single-center retrospective longitudinal study in patients diagnosed with CD and successfully treated following surgery and/or medical treatment. PATIENTS: We included 31 patients with median age and BMI (body mass index) of 37.7 [28.4;43.3] years old and 27.7 [25.8;30.4] kg/m2, respectively. Median 24 h urinary cortisol before treatment was 213.4 [168.5;478.5] µg/24 h. All subjects were completely biochemically controlled or cured after treatment. MAIN OUTCOME MEASURES: aBMD and TBS were evaluated at AP Spine (L1-L4) with DXA prodigy (GE-Lunar), QDR 4500 (Hologic), and TBS iNsight® (Med-Imaps) before and after treatment. RESULTS: Absolute TBS and aBMD gains following cure of CD were significant (p < 0.0001, and p < 0.001, respectively). aBMD and TBS increased by +3.9 and 8.2 % respectively after cure of CD. aBMD and TBS were not correlated before (p = 0.43) and after treatment (p = 0.53). Linear regression analyses showed that TBS gain was independent of baseline BMI and that low TBS at baseline was predictive of TBS gain after treatment. CONCLUSION: The more significant improvement of microarchitecture assessed by TBS than aBMD and the absence of correlation between TBS and aBMD suggest that TBS may be an adequate marker of bone restoration after cure of CD. To support this conclusion, future studies with larger sample sizes and longer follow-up periods should be carried out.

Backscatter measurement of cancellous bone using the ultrasound transit time spectroscopy.

Recently, ultrasound transit time spectroscopy (UTTS) was proposed as a promising method for bone quantitative ultrasound measurement. Studies have showed that UTTS could estimate the bone volume fraction and other trabecular bone structure in ultrasonic through-transmission measurements. The goal of this study was to explore the feasibility of UTTS to be adapted in ultrasonic backscatter measurement and further evaluate the performance of backscattered ultrasound transit time spectrum (BS-UTTS) in the measurement of cancellous bone density and structure. First, taking ultrasonic attenuation into account, the concept of BS-UTTS was verified on ultrasonic backscatter signals simulated from a set of scatterers with different positions and intensities. Then, in vitro backscatter measurements were performed on 26 bovine cancellous bone specimens. After a logarithmic compression of the BS-UTTS, a linear fitting of the log-compressed BS-UTTS versus ultrasonic propagated distance was performed and the slope and intercept of the fitted line for BS-UTTS were determined. The associations between BS-UTTS parameters and cancellous bone features were analyzed using simple linear regression. The results showed that the BS-UTTS could make an accurate deconvolution of the backscatter signal and predict the position and intensity of the simulated scatterers eliminating phase interference, even the simulated backscatter signal was with a relatively low signal-to-noise ratio. With varied positions and intensities of the scatterers, the slope of the fitted line for the log-compressed BS-UTTS versus ultrasonic propagated distance (i.e., slope of BS-UTTS for short) yield a high agreement (r2 = 99.84%-99.96%) with ultrasonic attenuation in simulated backscatter signal. Compared with the high-density cancellous bone, the low-density specimen showed more abundant backscatter impulse response in the BS-UTTS. The slope of BS-UTTS yield a significant correlation with bone mineral density (r = 0.87; p < 0.001), BV/TV (r = 0.87; p < 0.001), and cancellous bone microstructures (r up to 0.87; p < 0.05). The intercept of BS-UTTS was also significantly correlated with bone densities (r = -0.87; p < 0.001) and trabecular structures (|r|=0.43-0.80; p < 0.05). However, the slope of the BS-UTTS underestimated attenuation when measurements were performed experimentally. In addition, a significant non-linear relationship was observed between the measured attenuation and the attenuation estimated by the slope of the BS-UTTS. This study demonstrated that the UTTS method could be adapted to ultrasonic backscatter measurement of cancellous bone. The derived slope and intercept of BS-UTTS could be used in the measurement of bone density and microstructure. The backscattered ultrasound transit time spectroscopy might have potential in the diagnosis of osteoporosis in the clinic.

A Controlled Variable Study of the Biomechanical Properties of the Proximal Femur before and after Cancellous Bone Removal.

OBJECTIVE: The biomechanical characteristics of proximal femoral trabeculae are closely related to the occurrence and treatment of proximal femoral fractures. Therefore, it is of great significance to study its biomechanical effects of cancellous bone in the proximal femur. This study examines the biomechanical effects of the cancellous bone in the proximal femur using a controlled variable method, which provide a foundation for further research into the mechanical properties of the proximal femur. METHODS: Seventeen proximal femoral specimens were selected to scan by quantitative computed tomography (QCT), and the gray values of nine regions were measure to evaluated bone mineral density (BMD) using Mimics software. Then, an intact femur was fixed simulating unilateral standing position. Vertical compression experiments were then performed again after removing cancellous bone in the femoral head, femoral neck, and intertrochanteric region, and data were recorded. According to the controlled variable method, the femoral head, femoral neck, and intertrochanteric trabeculae were sequentially removed based on the axial loading of the intact femur, and the displacement and strain changes of the femur samples under axial loading were recorded. Gom software was used to measure and record displacement and strain maps of the femoral surface. RESULTS: There was a statistically significant difference in anteroposterior displacement of cancellous bone destruction in the proximal femur (p < 0.001). Proximal femoral bone mass explained 77.5% of the strength variation, in addition proximal femoral strength was mainly affected by bone mass at the level of the upper outer, lower inner, lower greater trochanter, and lesser trochanter of the femoral head. The normal stress conduction of the proximal femur was destroyed after removing cancellous bone, the stress was concentrated in the femoral head and lateral femoral neck, and the femoral head showed a tendency to subside after destroying cancellous bone. CONCLUSION: The trabecular removal significantly altered the strain distribution and biomechanical strength of the proximal femur, demonstrating an important role in supporting and transforming bending moment under the vertical load. In addition, the strength of the proximal femur mainly depends on the bone density of the femoral head and intertrochanteric region.

Theoretical and experimental study of attenuation in cancellous bone.

Significance: Photoacoustic (PA) technology shows great potential for bone assessment. However, the PA signals in cancellous bone are complex due to its complex composition and porous structure, making such signals challenging to apply directly in bone analysis. Aim: We introduce a photoacoustic differential attenuation spectrum (PA-DAS) method to separate the contribution of the acoustic propagation path to the PA signal from that of the source, and theoretically and experimentally investigate the propagation attenuation characteristics of cancellous bone. Approach: We modified Biot's theory by accounting for the high frequency and viscosity. In parallel with the rabbit osteoporosis model, we build an experimental PA-DAS system featuring an eccentric excitation differential detection mechanism. Moreover, we extract a PA-DAS quantization parameter-slope-to quantify the attenuation of high- and low-frequency components. Results: The results show that the porosity of cancellous bone can be evaluated by fast longitude wave attenuation at different frequencies and the PA-DAS slope of the osteoporotic group is significantly lower compared with the normal group (**p<0.01). Conclusions: Findings demonstrate that PA-DAS effectively differentiates osteoporotic bone from healthy bone, facilitating quantitative assessment of bone mineral density, and osteoporosis diagnosis.

Open the pores - Polydimethylsiloxane influences the porous structure of cancellous bone surrogates for biomechanical testing of osteosyntheses.

Synthetic materials used for valid and reliable implant testing and design should reflect the mechanical and morphometric properties of human bone. Such bone models are already available on the market, but they do not reflect the population variability of human bone, nor are they open-celled porous as human bone is. Biomechanical studies aimed at cementing the fracture or an implant cannot be conducted with them. The aim of this study was to investigate the influence of a cell stabilizer on polyurethane-based cancellous synthetic bone in terms of morphology, compressive mechanics, and opening of the cancellous bone structure for bone cement application. Mechanical properties of cylindrical specimens of the bone surrogates were determined by static compression tests to failure. Furthermore, a morphometric analysis was performed using microcomputed tomography. To prove the open-cell nature of the bone surrogates, an attempt was made to apply bone cement. Effects on the mechanical properties of the polyurethane-based bone surrogates were observed by the addition of polydimethylsiloxane. All mechanical parameters like Young's modulus, ultimate stress and yield stress increased statistically significantly with increasing amounts of cell stabilizer (all p > 0.001), except for yield stress. The analysis of morphometric parameters showed a decrease in trabecular thickness, spacing and connectivity density, which was accompanied by an increase in trabecular number and an increase in pore size. The open-cell nature was proven by the application and distribution of bone cement in specimens with stabilizer, which was visualized by X-ray. In conclusion, the results show that by adding a cell stabilizer, polyurethane-based cancellous bone substrates can be produced that have an open-cell structure similar to human bone. This makes these bone surrogates suitable for biomechanical testing of osteosyntheses and for osteosynthesis cementation issues.

Aromatase deficiency in transplanted bone marrow cells improves vertebral trabecular bone quantity, connectivity, and mineralization and decreases cortical porosity in murine bone marrow transplant recipients.

Estradiol is an important regulator of bone accumulation and maintenance. Circulating estrogens are primarily produced by the gonads. Aromatase, the enzyme responsible for the conversion of androgens to estrogen, is expressed by bone marrow cells (BMCs) of both hematopoietic and nonhematopoietic origin. While the significance of gonad-derived estradiol to bone health has been investigated, there is limited understanding regarding the relative contribution of BMC derived estrogens to bone metabolism. To elucidate the role of BMC derived estrogens in male bone, irradiated wild-type C57BL/6J mice received bone marrow cells transplanted from either WT (WT(WT)) or aromatase-deficient (WT(ArKO)) mice. MicroCT was acquired on lumbar vertebra to assess bone quantity and quality. WT(ArKO) animals had greater trabecular bone volume (BV/TV p = 0.002), with a higher trabecular number (p = 0.008), connectivity density (p = 0.017), and bone mineral content (p = 0.004). In cortical bone, WT(ArKO) animals exhibited smaller cortical pores and lower cortical porosity (p = 0.02). Static histomorphometry revealed fewer osteoclasts per bone surface (Oc.S/BS%), osteoclasts on the erosion surface (ES(Oc+)/BS, p = 0.04) and low number of osteoclasts per bone perimeter (N.Oc/B.Pm, p = 0.01) in WT(ArKO). Osteoblast-associated parameters in WT(ArKO) were lower but not statistically different from WT(WT). Dynamic histomorphometry suggested similar bone formation indices' patterns with lower mean values in mineral apposition rate, label separation, and BFR/BS in WT(ArKO) animals. Ex vivo bone cell differentiation assays demonstrated relative decreased osteoblast differentiation and ability to form mineralized nodules. This study demonstrates a role of local 17ß-estradiol production by BMCs for regulating the quantity and quality of bone in male mice. Underlying in vivo cellular and molecular mechanisms require further study.

Fluid-solid coupling numerical simulation of the effects of different doses of verapamil on cancellous bone in type 2 diabetic rats.

BACKGROUND: The purpose of this study was to investigate the effects of four different doses of verapamil on the mechanical behaviors of solid and the characteristics of fluid flow in cancellous bone of distal femur of type 2 diabetes rats under dynamic external load. METHODS: Based on the micro-CT images, the finite element models of cancellous bones and fluids at distal femurs of rats in control group, diabetes group, treatment groups VER 4, VER 12, VER 24, and VER 48 (verapamil doses of 4, 12, 24, and 48 mg/kg/day, respectively) were constructed. A sinusoidal time-varying displacement load with an amplitude of 0.8 µm and a period of 1s was applied to the upper surface of the solid region. Then, fluid-solid coupling numerical simulation method was used to analyze the magnitudes and distributions of von Mises stress, flow velocity, and fluid shear stress of cancellous bone models in each group. RESULTS: The results for mean values of von Mises stress, flow velocity and FSS (t = 0.25s) were as follows: their values in control group were lower than those in diabetes group; the three parameters varied with the dose of verapamil; in the four treatment groups, the values of VER 48 group were the lowest, they were the closest to control group, and they were smaller than diabetes group. Among the four treatment groups, VER 48 group had the highest proportion of the nodes with FSS = 1-3 Pa on the surface of cancellous bone, and more areas in VER 48 group were subjected to fluid shear stress of 1-3 Pa for more than half of the time. CONCLUSION: It could be seen that among the four treatment groups, osteoblasts on the cancellous bone surface in the highest dose group (VER 48 group) were more easily activated by mechanical loading, and the treatment effect was the best. This study might help in understanding the mechanism of verapamil's effect on the bone of type 2 diabetes mellitus, and provide theoretical guidance for the selection of verapamil dose in the clinical treatment of type 2 diabetes mellitus.

Damaged bone microarchitecture by Trabecular Bone Score (TBS) and low appendicular muscle mass: main risk factors for vertebral and non-vertebral fractures in women with long-standing rheumatoid arthritis.

We ascertained the fracture risk factors stratified by vertebral and non-vertebral sites in rheumatoid arthritis (RA) females. Bone/muscle features, but not disease activity, were the main markers for fractures in this long-standing RA population: low trabecular bone score (TBS) for vertebral fracture and decreased appendicular muscle mass for non-vertebral fracture. PURPOSE: To assess risk factors for fractures, including clinical, laboratory and dual energy X-ray absorptiometry (DXA) parameters (bone mass, trabecular bone score-TBS, muscle mass) in women with established rheumatoid arthritis (RA). METHODS: Three hundred females with RA (ACR, 2010) were studied. Clinical data were obtained by questionnaire and disease activity by composite indices (DAS28, CDAI, SDAI), C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR). Bone mineral density (BMD), TBS, body composition and Vertebral Fracture Assessment (VFA) were performed by DXA. Logistic regression models were constructed to identify factors independently associated with vertebral (VF) and non-vertebral fractures (NVF), separately. RESULTS: Through rigorous eligibility criteria, a total of 265 women were yielded for final data analysis (median age, 55 [22-86] years; mean disease duration, 16.2 years). Prevalence of VF and NVF were 30.6% and 17.4%, respectively. In multivariate analyzes, TBS (OR = 1.6, 95%CI = 1.09-2.36, p = 0.017), CRP (OR = 1.54, 95%CI = 1.15-2.08, p = 0.004), and parathormone (OR = 1.24, 95%CI = 1.05-1.45, p = 0.009) were risk factors for VF, whereas low appendicular muscle mass (OR = 2.71; 95%CI = 1.01-7,28; p = 0.048), body mass index (BMI) (OR = 0.90, 95%CI = 0.82-0.99; p = 0.025), ESR (OR = 1.18, 95%CI = 1.01-1,38, p = 0,038) and hip BMD (OR = 1.82, 95%CI = 1.10-3.03, p = 0.02) were associated with NVF. CONCLUSION: In women with long-term RA, markers of fractures differed between distinct skeletal sites (vertebral and non-vertebral). The magnitude of association of bone/muscle parameters with fracture (TBS for VF and appendicular muscle mass for NVF) was greater than that of the association between RA activity and fracture. TBS seems to have greater discriminative power than BMD to identify subjects with VF in long-standing RA.

Clinical Use of Trabecular Bone Score: The 2023 ISCD Official Positions.

Osteoporosis can currently be diagnosed by applying the WHO classification to bone mineral density (BMD) assessed by dual-energy x-ray absorptiometry (DXA). However, skeletal factors other than BMD contribute to bone strength and fracture risk. Lumbar spine TBS, a grey-level texture measure which is derived from DXA images has been extensively studied, enhances fracture prediction independent of BMD and can be used to adjust fracture probability from FRAX® to improve risk stratification. The purpose of this International Society for Clinical Densitometry task force was to review the existing evidence and develop recommendations to assist clinicians regarding when and how to perform, report and utilize TBS. Our review concluded that TBS is most likely to alter clinical management in patients aged ≥ 40 years who are close to the pharmacologic intervention threshold by FRAX. The TBS value from L1-L4 vertebral levels, without vertebral exclusions, should be used to calculate adjusted FRAX probabilities. L1-L4 vertebral levels can be used in the presence of degenerative changes and lumbar compression fractures. It is recommended not to report TBS if extreme structural or pathological artifacts are present. Monitoring and reporting TBS change is unlikely to be helpful with the current version of the TBS algorithm. The next version of TBS software will include an adjustment based upon directly measured tissue thickness. This is expected to improve performance and address some of the technical factors that affect the current algorithm which may require modifications to these Official Positions as experience is acquired with this new algorithm.

Hyperprolactinemia Due to Prolactinoma has an Adverse Impact on Bone Health with Predominant Impact on Trabecular Bone: A Systematic Review and Meta-Analysis.

BACKGROUND: No meta-analysis has holistically analysed and summarized the effect of prolactin excess due to prolactinomas on bone mineral metabolism. We undertook this meta-analysis to address this knowledge-gap. METHODS: Electronic databases were searched for studies having patients with hyperprolactinemia due to prolactinoma and the other being a matched control group. The primary outcome was to evaluate the differences in BMD Z-scores at different sites. The secondary outcomes of this study were to evaluate the alterations in bone mineral density, bone mineral content and the occurrence of fragility fractures. RESULTS: Data from 4 studies involving 437 individuals was analysed to find out the impact of prolactinoma on bone mineral metabolism. Individuals with prolactinoma had significantly lower Z scores at the lumbar spine [MD -1.08 (95 % CI: -1.57 - -0.59); P < 0.0001; I2 = 54 % (moderate heterogeneity)] but not at the femur neck [MD -1.31 (95 % CI: -3.07 - 0.45); P = 0.15; I2 = 98 % (high heterogeneity)] as compared to controls. Trabecular thickness of the radius [MD -0.01 (95 % CI: -0.02 - -0.00); P = 0.0006], tibia [MD -0.01 (95 % CI: -0.02 - -0.00); P=0.03] and cortical thickness of the radius [MD -0.01 (95 % CI: -0.19 - -0.00); P = 0.04] was significantly lower in patients with prolactinoma as compared to controls. The occurrence of fractures was significantly higher in patients with prolactinoma as compared to controls [OR 3.21 (95 % CI: 1.64 - 6.26); P = 0.0006] Conclusion: Bone mass is adversely affected in patients with hyperprolactinemia due to prolactinoma with predominant effects on the trabecular bone.

Preventing stress singularities in peri-implant bone - a finite element analysis using a graded bone model.

In finite element analysis bone is often treated as two-layered material that has a discontinuity between the cortical and cancellous bone, which leads to a singularity and incorrect stresses. The goal of this study was to eliminate this singularity and to create a more realistic representation of bone which also considers the transition zone between cortical and cancellous bone as observed in natural bone. This was achieved by modelling bone as a graded material and inserting node-specific values for Young's modulus in the finite element simulation, whereas the transition zone thickness was derived from a CT scan. The modelling was performed semi-automatically, and the maximum principal stresses of the new approach were compared to those of a conventional approach. The new approach was found to effectively avoid singularities and provides more accurate predictions of stress in areas of the bone transition zone. As the approach is automatable and causes rather small overhead it is recommended for use in future work, when the problem at hand requires evaluating stresses close to the former singularity.

Data-Driven Based Characterization of Anisotropic Mechanical Properties for Cancellous Bone From Low-Resolution CT Images.

OBJECTIVES: Exploring the anisotropic mechanical behavior of cancellous bone is crucial for in-vivo bone biomechanical analysis. However, it is challenging to characterize anisotropic mechanical behaviors under low-resolution (LR) clinical CT images due to a lack of microstructural information. The data-driven method proposed in this article accurately characterizes the anisotropic mechanical properties of cancellous bone from LR clinical CT images. METHODS: The trabecular bone cubes of sheep are used to obtain a high-resolution (HR) micro-CT and an LR clinical CT image dataset. First, an auto-encoder model is trained using HR image data. Microstructural features are extracted by the encoder. A fast super-resolution (FSR) model is trained to map LR bone cubes to the features extracted from corresponding HR samples. The pretrained FSR model is used to convert LR clinical CT images to encoded microstructural features. The features are later used to predict target histomorphological parameters, anisotropic elastic tensors, and fabric tensors based on a fully connected neural network. RESULTS: The data-driven model accurately predicts the elastic tensor and fabric tensor of trabecular bones with LR CT images with 0.6 mm/pixel spatial resolution. It was verified that LR clinical CT images could generate microstructural information using a generative deep-learning model and an up-sampling operation. SIGNIFICANCE: This study proves that clinical medical images of cancellous bone can be used for analysis of complex mechanical properties using a data-driven method, which is useful for real-time bone defect diagnosis and personalized bone prosthesis design in clinical application.

Simultaneous visualization of micro-damage in cortical bone, trabecular bone, and intracortical vasculature for diagnosing osteoporosis: An animal model synchrotron imaging.

Osteoporosis (OP) is difficult to diagnose through the three-dimensional visualization of micro-damage. In this study, aimed to make an objective diagnosis by visualizing micro-damage caused by OP using synchrotron radiation-based µCT (SR-µCT). Female mice (n = 12) were randomly divided into an ovariectomized group (OVX, n = 6) in which both ovaries were excised and OP occurred, and a sham-operated group (SHAM, n = 6). After six weeks, all femurs (left and right) were excised from both groups (n = 12 per group). Thereafter, femurs were randomly divided into SR-µCT (OVX group, n = 6; SHAM group, n = 6) and µCT (OVX group, n = 6; SHAM group, n = 6) groups. In the SR-µCT group, micro-damage was visualized by manually segmenting the cortical bone, trabecular bone, and intracortical vasculature using a water-shedding algorithm. In addition, trabecular bone was obtained by automatic segmentation using µCT. Cortical bone volume/total volume was greater (p = .015), and cortical thickness was greater in the SHAM group than in the OVX group (p = .007). Among the trabecular bone parameters, the bone volume/total volume (TV) in OVX was significantly lower than that in the SHAM group (p = .012). The canal volume was greater (p = .021) and lacuna volume was greater (p < .001) in the SHAM group than in the OVX group. We expect that it will be possible to analyze damage and recovery mechanisms in the field of rehabilitation. SR-µCT has been proposed as an objective method for OP diagnosis as it allows the visualization of microstructures. RESEARCH HIGHLIGHTS: Damage mechanism for diagnosis and evaluation in an osteoporosis model. Synchrotron radiation can objectively diagnose osteoporosis. Visualization is possible by segmenting microdamage caused by osteoporosis.

Trabecular bone score in adults with type 1 diabetes: a meta-analysis.

Type 1 diabetes mellitus (T1DM) is associated with a disproportionately high fracture rate despite a minimal decrease in bone mineral density. Though trabecular bone score (TBS), an indirect measure of bone architecture, is lower in adults with T1DM, the modest difference is unlikely to account for the large excess risk and calls for further exploration. INTRODUCTION: Fracture rates in type 1 diabetes mellitus (T1DM) are disproportionately high compared to the modestly low bone mineral density (BMD). Distortion of bone microarchitecture compromises bone quality in T1DM and is indirectly measured by trabecular bone score (TBS). TBS could potentially be used as a screening tool for skeletal assessment; however, there are inconsistencies in the studies evaluating TBS in T1DM. We performed this meta-analysis to address this knowledge gap. METHODS: An electronic literature search was conducted using PubMed, Scopus, and Web of Science resources (all-year time span) to identify studies relating to TBS in T1DM. Cross-sectional and retrospective studies in adults with T1DM were included. TBS and BMD data were extracted for pooled analysis. Fracture risk could not be analyzed as there were insufficient studies reporting it. RESULT: Data from six studies were included (T1DM: n = 378 and controls: n = 286). Pooled analysis showed a significantly lower TBS [standardized mean difference (SMD) = - 0.37, 95% CI - 0.52 to - 0.21; p < 0.00001] in T1DM compared to controls. There was no difference in the lumbar spine BMD (6 studies, SMD - 0.06, 95% CI - 0.22 to 0.09; p = 0.43) and total hip BMD (6 studies, SMD - 0.17, 95% CI - 0.35 to 0.01; p = 0.06) in the case and control groups. CONCLUSIONS: Adults with T1DM have a lower TBS but similar total hip and lumbar spine BMD compared to controls. The risk attributable to the significant but limited difference in TBS falls short of explaining the large excess propensity to fragility fracture in adults with T1DM. Further studies on clarification of the mechanism and whether TBS is suited to screen for fracture risk in adults with T1DM are necessary.

Short-term variations in trabecular bone texture parameters associated to radio-clinical biomarkers improve the prediction of radiographic knee osteoarthritis progression.

The present study aims to examine whether the short-term variations in trabecular bone texture (TBT) parameters, combined with a targeted set of clinical and radiographic data, would improve the prediction of long-term radiographic knee osteoarthritis (KOA) progression. Longitudinal (baseline, 24 and 48-month) data, obtained from the Osteoarthritis Initiative cohort, were available for 1352 individuals, with preexisting OA (1 < Kellgren-Lawrence < 4) at baseline. KOA progression was defined as an increase in the medial joint space narrowing score from the 24-months to the 48-months control point. 16 regions of interest were automatically selected from each radiographic knee and analyzed using fractal dimension. Variations from baseline to 24 months in TBT descriptors as well as selected radiographic and clinical readings were calculated. Different logistic regression models were developed to evaluate the progression prediction performance when associating TBT variations with the selected clinical and radiographic readings. The most predictive model was mainly determined using the area under the receiver operating characteristic curve (AUC). The proposed prediction model including short-term variations in TBT parameters, associated with clinical covariates and radiographic scores, improved the capacity of predicting long-term radiographic KOA progression (AUC of 0.739), compared to models based solely on baseline values (AUC of 0.676, p-value < 0.008).