Effects of Different Carbon Sources on Enzyme Production and Ultrastructure of Cellulosimicrobium cellulans.

The secretomes of the strain Cellulosimicrobium cellulans F16 grown on different carbon sources were analyzed by zymography, and the subcellular surface structures were extensively studied by electron microscope. The exo-cellulase and xylanase systems were sparse when cells were grown on soluble oligosaccharides, but were significantly increased when grown on complex and water-insoluble polysaccharides, such as Avicel, corn cob, and birchwood xylan. The cellulosome-like protuberant structures were clearly observed on the cell surfaces of strain F16 grown on cellulose, with diameters of 15-20 nm. Fibrous structures that connected the adjacent cells can be seen under microscope. Moreover, protuberances that adsorbed the cell to cellulose were also observed. As the adhesion of Cellulosimicrobium cellulans cells onto cellulose surfaces occurs via thick bacterial curdlan-type exopolysaccharides (EPS), such surface layer is potentially important in the digestion of insoluble substrates such as cellulose or hemicellulose, and the previously reported xylanosomes are part of such complex glycocalyx layer on the surface of the bacterial cell.

Combining in Vitro and in Silico Single-Molecule Force Spectroscopy to Characterize and Tune Cellulosomal Scaffoldin Mechanics.

Cellulosomes are polyprotein machineries that efficiently degrade cellulosic material. Crucial to their function are scaffolds consisting of highly homologous cohesin domains, which serve a dual role by coordinating a multiplicity of enzymes as well as anchoring the microbe to its substrate. Here we combined two approaches to elucidate the mechanical properties of the main scaffold ScaA of Acetivibrio cellulolyticus. A newly developed parallelized one-pot in vitro transcription-translation and protein pull-down protocol enabled high-throughput atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) measurements of all cohesins from ScaA with a single cantilever, thus promising improved relative force comparability. Albeit very similar in sequence, the hanging cohesins showed considerably lower unfolding forces than the bridging cohesins, which are subjected to force when the microbe is anchored to its substrate. Additionally, all-atom steered molecular dynamics (SMD) simulations on homology models offered insight into the process of cohesin unfolding under force. Based on the differences among the individual force propagation pathways and their associated correlation communities, we designed mutants to tune the mechanical stability of the weakest hanging cohesin. The proposed mutants were tested in a second high-throughput AFM SMFS experiment revealing that in one case a single alanine to glycine point mutation suffices to more than double the mechanical stability. In summary, we have successfully characterized the force induced unfolding behavior of all cohesins from the scaffoldin ScaA, as well as revealed how small changes in sequence can have large effects on force resilience in cohesin domains. Our strategy provides an efficient way to test and improve the mechanical integrity of protein domains in general.

Cellulosomes: bacterial nanomachines for dismantling plant polysaccharides.

Cellulosomes are multienzyme complexes that are produced by anaerobic cellulolytic bacteria for the degradation of lignocellulosic biomass. They comprise a complex of scaffoldin, which is the structural subunit, and various enzymatic subunits. The intersubunit interactions in these multienzyme complexes are mediated by cohesin and dockerin modules. Cellulosome-producing bacteria have been isolated from a large variety of environments, which reflects their prevalence and the importance of this microbial enzymatic strategy. In a given species, cellulosomes exhibit intrinsic heterogeneity, and between species there is a broad diversity in the composition and configuration of cellulosomes. With the development of modern technologies, such as genomics and proteomics, the full protein content of cellulosomes and their expression levels can now be assessed and the regulatory mechanisms identified. Owing to their highly efficient organization and hydrolytic activity, cellulosomes hold immense potential for application in the degradation of biomass and are the focus of much effort to engineer an ideal microorganism for the conversion of lignocellulose to valuable products, such as biofuels.

Dramatic performance of Clostridium thermocellum explained by its wide range of cellulase modalities.

Clostridium thermocellum is the most efficient microorganism for solubilizing lignocellulosic biomass known to date. Its high cellulose digestion capability is attributed to efficient cellulases consisting of both a free-enzyme system and a tethered cellulosomal system wherein carbohydrate active enzymes (CAZymes) are organized by primary and secondary scaffoldin proteins to generate large protein complexes attached to the bacterial cell wall. This study demonstrates that C. thermocellum also uses a type of cellulosomal system not bound to the bacterial cell wall, called the "cell-free" cellulosomal system. The cell-free cellulosome complex can be seen as a "long range cellulosome" because it can diffuse away from the cell and degrade polysaccharide substrates remotely from the bacterial cell. The contribution of these two types of cellulosomal systems in C. thermocellum was elucidated by characterization of mutants with different combinations of scaffoldin gene deletions. The primary scaffoldin, CipA, was found to play the most important role in cellulose degradation by C. thermocellum, whereas the secondary scaffoldins have less important roles. Additionally, the distinct and efficient mode of action of the C. thermocellum exoproteome, wherein the cellulosomes splay or divide biomass particles, changes when either the primary or secondary scaffolds are removed, showing that the intact wild-type cellulosomal system is necessary for this essential mode of action. This new transcriptional and proteomic evidence shows that a functional primary scaffoldin plays a more important role compared to secondary scaffoldins in the proper regulation of CAZyme genes, cellodextrin transport, and other cellular functions.

Driving biomass breakdown through engineered cellulosomes.

Extraction of sugar is the rate-limiting step in converting unpretreated biomass into value-added products through microbial fermentation. Both anaerobic fungi and anaerobic bacteria have evolved to produce large multi-cellulase complexes referred to as cellulosomes, which are powerful machines for biomass deconstruction. Characterization of bacterial cellulosomes has inspired synthetic "designer" cellulosomes, consisting of parts discovered from the native system that have proven useful for cellulose depolymerization. By contrast, the multi-cellulase complexes produced by anaerobic fungi are much more poorly understood, and to date their composition, architecture, and enzyme tethering mechanism remain unknown and heavily debated. Here, we compare current knowledge pertaining to the cellulosomes produced by both bacteria and fungi, including their application to synthetic enzyme-tethered systems for tunneled biocatalysis. We highlight gaps in knowledge and opportunities for discovery, especially pertaining to the potential of fungal cellulosome-inspired systems.

Isolation and characterization of a new cellulosome-producing Clostridium thermocellum strain.

The anaerobic thermophilic bacterium, Clostridium thermocellum, is a potent cellulolytic microorganism that produces large extracellular multienzyme complexes called cellulosomes. To isolate C. thermocellum organisms that possess effective cellulose-degrading ability, new thermophilic cellulolytic strains were screened from more than 800 samples obtained mainly from agriculture residues in Thailand using microcrystalline cellulose as a carbon source. A new strain, C. thermocellum S14, having high cellulose-degrading ability was isolated from bagasse paper sludge. Cellulosomes prepared from S14 demonstrated faster degradation of microcrystalline cellulose, and 3.4- and 5.6-fold greater Avicelase activity than those from C. thermocellum ATCC27405 and JW20 (ATCC31449), respectively. Scanning electron microscopic analysis showed that S14 had unique cell surface features with few protuberances in contrast to the type strains. In addition, the cellulosome of S14 was resistant to inhibition by cellobiose that is a major end product of cellulose hydrolysis. Saccharification tests conducted using rice straw soaked with sodium hydroxide indicated the cellulosome of S14 released approximately 1.5-fold more total sugars compared to that of ATCC27405. This newly isolated S14 strain has the potential as an enzyme resource for effective lignocellulose degradation.

The rosettazyme: a synthetic cellulosome.

Cellulose is an attractive feedstock for biofuel production because of its abundance, but the cellulose polymer is extremely stable and its constituent sugars are difficult to access. In nature, extracellular multi-enzyme complexes known as cellulosomes are among the most effective ways to transform cellulose to useable sugars. Cellulosomes consist of a diversity of secreted cellulases and other plant cell-wall degrading enzymes bound to a protein scaffold. These scaffold proteins have cohesin modules that bind conserved dockerin modules on the enzymes. It is thought that the localization of these diverse enzymes on the scaffold allows them to function synergistically. In order to understand and harness this synergy smaller, simplified cellulosomes have been constructed, expressed, and reconstituted using truncated cohesin-containing scaffolds. Here we show that an 18-subunit protein complex called a rosettasome can be genetically engineered to bind dockerin-containing enzymes and function like a cellulosome. Rosettasomes are thermostable, group II chaperonins from the hyperthermo-acidophilic archaeon Sulfolobus shibatae, which in the presence of ATP/Mg(2+) assemble into 18-subunit, double-ring structures. We fused a cohesin module from Clostridium thermocellum to a circular permutant of a rosettasome subunit, and we demonstrate that the cohesin-rosettasomes: (1) bind dockerin-containing endo- and exo-gluconases, (2) the bound enzymes have increased cellulose-degrading activity compared to their activity free in solution, and (3) this increased activity depends on the number and ratio of the bound glucanases. We call these engineered multi-enzyme structures rosettazymes.

A biophysical perspective on the cellulosome: new opportunities for biomass conversion.

The cellulosome is a multiprotein complex, produced primarily by anaerobic microorganisms, which functions to degrade lignocellulosic materials. An important topic of current debate is whether cellulosomal systems display greater ability to deconstruct complex biomass materials (e.g. plant cell walls) than nonaggregated enzymes, and in so doing would be appropriate for improved, commercial bioconversion processes. To sufficiently understand the complex macromolecular processes between plant cell wall polymers, cellulolytic microbes, and their secreted enzymes, a highly concerted research approach is required. Adaptation of existing biophysical techniques and development of new science tools must be applied to this system. This review focuses on strategies likely to permit improved understanding of the bacterial cellulosome using biophysical approaches, with emphasis on advanced imaging and computational techniques.

The curdlan-type exopolysaccharide produced by Cellulomonas flavigena KU forms part of an extracellular glycocalyx involved in cellulose degradation.

The genus Cellulomonas is comprised of a group of Gram-positive, soil bacteria capable of utilizing cellulose as their sole source of carbon and energy. Cellulomonas flavigena KU was originally isolated from leaf litter and subsequently shown to produce large quantities of a curdlan-type (beta-1,3-glucan) exopolysaccharide (EPS) when provided with an excess of glucose or other soluble carbon-source. We report here that curdlan EPS is also produced by Cellulomonas flavigena KU when growing on microcrystalline cellulose in mineral salts-yeast extract media. Microscopic examination of such cultures shows an adherent biofilm matrix composed of cells, curdlan EPS, and numerous surface structures resembling cellulosome complexes. Those Cellulomonas species that produce curdlan EPS are all non-motile and adhere to cellulose as it is broken down into soluble sugars. These observations suggest two very different approaches towards the complex process of cellulose degradation within the genus Cellulomonas.

Structural organization of the intact bacterial cellulosome as revealed by electron microscopy.

The architecture of the intact cellulosome of Clostridium thermocellum, a huge extracellular multi-polypetide bacterial enzyme complex engaged in degradation of cellulose, was investigated by electron microscopy. This was done because former electron microscopic studies aimed at elucidation of the structure of polycellulosomes and cellulosomes were restricted by the fact that data on macromolecular details could only be derived from deformed or disrupted enzyme complexes, or by application of cryo preparation and imaging techniques yielding insufficient resolution. The shape of well-preserved cellulosomes was more or less spherical, often similar to that of an olive fruit with a cavity. Therein, multiple fibrillar structures could be visualized, interpreted to be the proximal stretches of copies of the fibrillar protein Cip A ('scaffoldin'), the nonenzymatic scaffolding protein known to function as attachment site for the enzymatic subunits, as well as fibrillar parts of anchoring proteins. The enzymatic subunits were depicted to be attached, in a repetitive fashion, to the distal stretches of the Cip A proteins. The enzymatic subunits were seen, in the intact cellulosome, to form a shell-like complex substructure surrounding the cavity. Obviously, this kind of architecture makes sure that the catalytic domains of the enzymatic subunits are exposed to the environment, and, hence, to the substrate, the cellulose fibrils. Attempts were made to demonstrate the alternating occurrence of coiled domains and fibrillar stretches along the elongated protein Cip A previously characterized by sequencing, X-ray, and NMR studies. To this end, Cip A molecules, with adhering enzymatic subunits, were partially removed from their native location within the cellulosome, "stretched" by hydromechanical forces directly on the electron microscopic support film, negatively stained, and depicted by electron microscopy. The alternating occurrence of presumed coiled domains and fibrillar stretches along Cip A could be visualized, together with detached enzymatic subunits found on the support film.