RESUMEN
Background: Clinical chemistry tests are most widely used in clinical laboratories, and diverse measurement systems for these analyses are available in China. We evaluated the imprecision of clinical chemistry measurement systems based on internal QC (IQC) data. Methods: IQC data for 27 general chemistry analytes were collected in February each year from 2013 to 2022. Four performance specifications were used to calculate pass rates for CVs of IQC data in 2022. Boxplots were drawn to analyze trends of CVs, and differences in CVs among different groups were assessed using the Mann-Whitney U-test or Kruskal-Wallis test. Results: The number of participating laboratories increased significantly from 1,777 in 2013 to 5,425 in 2022. CVs significantly decreased for all 27 analytes, except creatine kinase and lipase. Triglycerides, total bilirubin, direct bilirubin, iron, and γ-glutamyl transferase achieved pass rates >80% for all goals. Nine analytes with pass rates <80% based on 1/3 allowable total error were further analyzed; the results indicated that closed systems exhibited lower CVs than open systems for all analytes, except total protein. For all nine analytes, differences were significant between tertiary hospitals and non-tertiary hospitals and between accredited and non-accredited laboratories. Conclusions: The CVs of IQC data for clinical chemistry have seen a continuous overall improvement in China. However, there is ample room for imprecision improvement for several analytes, with stricter performance specifications.
Asunto(s)
Servicios de Laboratorio Clínico , Laboratorios , Humanos , Control de Calidad , Pruebas de Química Clínica , Bilirrubina , China , Química ClínicaRESUMEN
Matrix effect and sample pretreatment significantly affect the percentage recovery of peptides in biological matrices, affecting the method robustness and accuracy. To counteract this effect, an internal standard (IS) is used; however, in most cases this is not available, which limits the analytical method. It is important to identify short peptides that can be used as ISs in the quantification of peptides in biological matrices. In this study, doping peptides GHRP-4, GHRP-5, GHRP-6, Sermorelin (1-11), Sermorelin (13-20) and Sermorelin (22-29) were synthesized using solid-phase peptide synthesis. Treatment with human blood, trypsin and chymotrypsin was used to determine the stability of the peptides. Products were evaluated using the high-performance liquid chromatography-diode array detector (HPLC-DAD) method. The analytical methodology and sample pretreatment were effective for the analysis of these molecules. A unique profile related to protein binding and enzymatic stability of each peptide was established. GHRP-4, GHRP-6 and Sermorelin (22-29) can be considered as in-house ISs as they were stable to enzyme and blood treatment and can be used for the quantification of peptides in biological samples. Peptides GHRP-6 and Sermorelin (22-29) were used to analyse a dimeric peptide (26 [F] LfcinB (20-30)2 ) in four different matrices to test these peptides as in-house IS.
Asunto(s)
Pruebas de Química Clínica , Doping en los Deportes , Hormona Liberadora de Hormona del Crecimiento , Sustancias de Crecimiento , Péptidos/análisis , Humanos , Suero/química , Estabilidad Proteica , Análisis Químico de la Sangre/normas , Pruebas de Química Clínica/normas , Hormona Liberadora de Hormona del Crecimiento/análisis , Sustancias de Crecimiento/análisisRESUMEN
Diagnostic laboratory tests are frequently overused in healthcare entities, leading to an increased strain on laboratory resources, additional workload, and wastage of resources. Continuous monitoring of test ordering behavior is crucial to evaluate clinical necessity. This cross-sectional study aimed to estimate the necessity of ordering clinical chemistry tests in the cardiology clinic of a tertiary center in Saudi Arabia. We retrieved medical records of patients diagnosed with cardiovascular problems admitted at the cardiology clinic in 2020. The frequency and percentages of the ordered tests were calculated upon admission and follow-up, and the difference between necessary and unnecessary tests was compared for each category. Test ordering assessment included cardiac, renal, and liver functions, blood gases, thyroid and diabetic profile, iron indices, hormones, water and electrolytes, and inflammatory markers. The results showed a large number of clinical chemistry tests ordered without clinical necessity. While the number of necessary tests was significantly higher than that of unnecessary tests, 21% of the tests ordered between June-December 2021 at the center were unnecessary. Further studies are necessary to identify driving factors and develop strategies to reduce the overutilization of diagnostic laboratory tests in clinical practice. Eliminating this phenomenon will reduce the risk of unnecessary medical interventions and associated costs, improve patient outcomes, and reduce the overall burden on the healthcare system.
Asunto(s)
Cardiología , Química Clínica , Humanos , Estudios Transversales , Instituciones de Salud , Pruebas de Química ClínicaRESUMEN
Los informes de laboratorio tienen impacto en las decisiones médicas. El ayuno es un factor preanalítico "controlable" que influye en los distintos parámetros bioquímicos. El objetivo del presente trabajo es poner en discusión la realización en pediatría de análisis clínicos con la indicación de un ayuno fisiológico , analizando resultados obtenidos por diferentes autores y evaluando las diferencias clínicas encontradas según los criterios de calidad establecidos por el laboratorio de Química Clínica. La mayoría de los individuos durante el día se encuentran en estado postprandial. Los resultados del perfil lipídico en ayunas no representan las concentraciones reales promedios de los lípidos plasmáticos de un paciente. El ayuno no sería crítico en la etapa de pesquisa , pero puede ser relevante para establecer un diagnóstico certero o inicio de tratamiento. En el caso de la glucemia si se indica en el control rutinario del paciente, y no hay sospecha de alteraciones en el metabolismo de los hidratos de carbono la glucemia sin ayuno puede ser solicitada comparando la misma con valores de corte adecuado. Las diferentes guías nacionales e internacionales recomiendan que la elección de la métrica para la evaluación, control y seguimiento de pacientes con diagnóstico de diabetes se realicen según el objetivo terapéutico. En los trabajos analizados, observamos que varios parámetros bioquímicos presentaron diferencias estadísticas, aunque las diferencias clínicas no fueron relevantes y permanecieron dentro de los intervalos de referencia. El factor limitante para evaluar parámetros bioquímicos sin ayuno es la falta de valores de referencia adecuados. Hay evidencia suficiente para que tanto el perfil lipídico, la glucemia como el resto de los parámetros bioquímicos del laboratorio de química clínica, sean solicitados con la indicación de un ayuno fisiológico de 2, 4 o 6 horas, dependiendo siempre del motivo de consulta y/o la edad del paciente. Es esencial extender la evaluación a otros analitos en población pediátrica, así como evaluar nuevos puntos de corte para parámetros bioquímicos sin ayuno (AU)
Laboratory reports have an impact on medical decision-making. Fasting is a "controllable" preanalytical factor that influences the different biochemical parameters. The aim of this study is to discuss the performance of clinical analyses in pediatrics with the indication of physiological fasting, analyzing results obtained in different disciplines, and evaluating the clinical differences found according to the quality criteria established by the clinical chemistry laboratory. During the day, most patients are in a postprandial state. Fasting lipid profile results do not represent the actual average plasma lipid concentrations of a patient. Fasting would not be critical in the screening stage, but it may be relevant to establish an accurate diagnosis or initiate treatment. Regarding glycemia, if it is indicated in the routine control of the patient and there is no suspicion of alterations in carbohydrate metabolism, non-fasting glycemia can be requested, comparing it with adequate cut-off values. Different national and international guidelines recommend that the choice of metrics for the evaluation, control, and follow-up of patients with diabetes should be made according to the therapeutic objective. In the studies analyzed, we found that several biochemical parameters presented statistical differences, although the clinical differences were not relevant and remained within the reference range. The limiting factor in the evaluation of biochemical parameters without fasting is the lack of adequate reference values. There is sufficient evidence that the lipid profile, glycemia, and the remaining biochemical parameters of the clinical chemistry laboratory should be requested with the indication of a physiological fast of 2, 4, or 6 hours, always depending on the reason for consultation and/or the patient's age. It is essential to extend the evaluation to other analytes in the pediatric population, as well as to evaluate new cut-off points for biochemical parameters without fasting (AU)
Asunto(s)
Humanos , Preescolar , Niño , Adolescente , Valores de Referencia , Ayuno/sangre , Pruebas de Química Clínica/métodos , Factores de Riesgo de Enfermedad Cardiaca , Pediatría , Periodo Posprandial , Hiperlipidemias/diagnósticoRESUMEN
OBJECTIVES: Rapid and accurate laboratory tests are essential to support clinical decision-making. Despite the various efforts to control quality in the laboratory, our outpatient chemistry turnaround time (TAT) has deteriorated since 2018. Moreover, these difficulties have accelerated further due to the COVID-19 pandemic. Therefore, we aimed to improve laboratory work efficiency by identifying and eliminating the causes of reduced laboratory work efficiency. DESIGN & METHODS: We surveyed to identify tasks that reduce work efficiency. Based on our survey, a new-concept of work assistance middleware linked to laboratory information system (LIS) was developed. The middleware supports test end-time prediction, automatic real-time TAT monitoring, and urgent test requests so that medical technologists can focus on their chemistry tests. The developed middleware was used for 6 months in laboratory and outpatient clinics, and its effectiveness was evaluated. RESULTS: The median TAT for outpatient chemistry tests was reduced by 6.6 min, from 72.4 min to 65.8 min. And not only did the maximum TAT for the sample decrease from 353 min to 214 min, but the proportion of samples exceeding the TAT target (120 min) also decreased by 77%; from 2.00% in 2010 (1,905 out of 94,989 samples) to 0.46% in 2021 (453 out of 98,117 samples). 2,199 samples were urgently requested through middleware, and they were processed about 15% faster than other samples, effectively performing urgent tests. The test end-time prediction showed an error of 8.6 min in the evaluation using the MAE (Mean Absolute Error) index. CONCLUSIONS: Through this study, the quality and efficiency of the laboratory were improved, and while reducing the workload of medical staff, it contributed to enhancing patient safety and satisfaction.
Asunto(s)
COVID-19 , Sistemas de Información en Laboratorio Clínico , Humanos , Pacientes Ambulatorios , Mejoramiento de la Calidad , Pandemias/prevención & control , Factores de Tiempo , COVID-19/diagnóstico , Pruebas de Química ClínicaRESUMEN
The influence of hemolysis was evaluated for 26 clinical chemistry parameters on DxC 700AU (Beckman Coulter®). Ten sample pools were prepared and separated into six aliquots. These aliquots were overloaded with hemolysis in increasing amounts to reach levels equivalent to the maximum hemolysis thresholds H1 (+), H2 (++), H3 (+++) and H4 (++++). Each aliquot is compared to its reference aliquot (not hemolyzed) and a ratio is calculated for each parameter. We proposed that there was a significant difference if, for a given analyte and threshold, more than 20% of the ratios are above the total acceptable limit variability. A significant difference was found for TGP, TGO, cholesterol, creatine kinase (CPK), lactate deshydrogenase (LDH), phosphorus and potassium at H1 (+), chlorine, iron, γ-glutamyltransferase (GGT), and magnesium at H2 (++), amylase and alkaline phosphatase (PAL) at H3 (++++), and prealbumin at H4 (++++). No interference was found until H4 included for uric acid, calcium, creatinine, lipase, glucose, HDL-cholesterol, triglycerides, urea, sodium and immunoglobulins A, G and M. The overestimation of kalemia was calculated as a function of hemolysis, ranging from 0.28 mM +/0.047 (upper H1 threshold) to 1.37 mM +/0.126 (upper H4 threshold). Its estimation makes it possible to propose a result rendering algorithm of kalemia according to the hemolysis index. Evaluation of the automates hemolysis indexes is highly recommended for each laboratory. It can allow for some critical parameters the establishment of a decision tree facilitating the result rendering, after clinicobiological consultation.
L'influence de l'hémolyse a été évaluée pour 26 paramètres biochimiques sur l'analyseur DxC 700 AU (Beckman Coulter®). Dix pools d'échantillons ont été préparés et séparés en six aliquots surchargés en hémolysat selon une quantité croissante d'hémoglobine pour atteindre des niveaux équivalents aux seuils maximums d'hémolyse de l'automate H1(+), H2(++), H3(+++) et H4 (++++). Chaque aliquot est comparé à son aliquot de référence (sans hémolysat) et un ratio est calculé pour chaque paramètre. Nous proposons une différence significative si, pour un analyte et un seuil donné, plus de 20 % des ratios sont supérieurs à la variabilité limite totale acceptable (VLTA). Une différence significative est retrouvée pour ALAT, ASAT, cholestérol, créatine kinase (CPK), lactate deshydrogenase (LDH), phosphore et potassium dès H1, chlore, fer, γ--glutamyltransferase (GGT), et magnésium pour H2, amylase et phosphatase alcaline (PAL) pour H3, et préalbumine pour H4. Aucune interférence n'a été retrouvée jusqu'à H4 inclus pour acide urique, calcium, créatinine, lipase, glucose, HDL-cholestérol, triglycérides, urée, sodium et immunoglobulines A, G et M. La surestimation de la kaliémie a été calculée en fonction de l'hémolyse : elle varie de 0,28 mM ± 0,047 (seuil supérieur de H1) à 1,37 mM ± 0,126 (seuil supérieur de H4). Son estimation permet proposer un algorithme de rendu de résultat de la kaliémie selon l'index d'hémolyse. L'évaluation des index d'hémolyses de l'automate est, pour chaque laboratoire, fortement recommandée. Elle peut permettre, pour certains paramètres critiques, la mise en place d'un arbre décisionnel facilitant le rendu de résultat, après concertation clinicobiologique.
Asunto(s)
Pruebas de Química Clínica , Hemólisis , Algoritmos , Colesterol , Pruebas Hematológicas , HumanosRESUMEN
OBJECTIVES: Recently, the linearity evaluation protocol by the Clinical & Laboratory Standards Institute (CLSI) has been revised from EP6-A to EP6-ED2, with the statistical method of interpreting linearity evaluation data being changed from polynomial regression to weighted least squares linear regression (WLS). We analyzed and compared the analytical measurement range (AMR) verification results according to the present and prior linearity evaluation guidelines. METHODS: The verification of AMR of clinical chemistry tests was performed using five samples with two replicates in three different laboratories. After analyzing the same evaluation data in each laboratory by the polynomial regression analysis and WLS methods, results were compared to determine whether linearity was verified across the five sample concentrations. In addition, whether the 90% confidence interval of deviation from linearity by WLS was included in the allowable deviation from linearity (ADL) was compared. RESULTS: A linearity of 42.3-56.8% of the chemistry items was verified by polynomial regression analysis in three laboratories. For analysis of the same data by WLS, a linearity of 63.5-78.3% of the test items was verified where the deviation from linearity of all five samples was within the ADL criteria, and the cases where the 90% confidence interval of all deviation from linearity overlapped the ADL was 78.8-91.3%. CONCLUSIONS: Interpreting AMR verification data by the WLS method according to the newly revised CLSI document EP6-ED2 could reduce laboratory workload, enabling efficient laboratory practice.
Asunto(s)
Pruebas de Química Clínica , Laboratorios , Humanos , Análisis de los Mínimos Cuadrados , Modelos Lineales , Estándares de ReferenciaRESUMEN
The aim of this study was to perform the analytical validation of Alinity c and i analyzers (Abbott Laboratories, Chicago, IL, USA) for 39 clinical chemistry tests and 17 immunoassays. Precision was evaluated at least at two concentration levels for 5 days in quintuplicate, following CLSI EP15-A3. Method comparison included parallel analysis of leftover routine samples on Alinity analyzers and the previously used Cobas c501 and e601 (Roche Diagnostics, Mannheim, Germany). Linearity was tested by preparing sequential sample dilutions with high analyte concentration, following the CLSI EP6 document. For clinical chemistry tests, within-run coefficients of variation (CV) were up to 6.0% (beta-2-microglobulin), while between-run CVs up to 5.4% (immunoglobulin M). Among immunoassays, the highest within-run CV was obtained for vitamin B12 (6.9%), while between-run for CA 19-9 (4.3%). Complete agreement with Roche analyzers was observed for 16 (41%) clinical chemistry assays and 6 (35%) immunoassays. Half of all evaluated assays did not meet the desirable biological variation criteria for bias, being especially exceeded for alpha1-antitrypsin, apolipoprotein A1, ceruloplasmin, complement C3 and C4, hemoglobin A1c, lipoprotein (a) and myoglobin, as well as some tumor markers (CA 125, CEA, fPSA, AFP, and ferritin), hormones (cortisol, DHEA-S, insulin) and vitamins (25-OHD). Linearity in the tested ranges was confirmed. Overall, this study revealed that precision criteria derived from manufacturer's claims were not satisfied for all assays while comparison study for some assays yielded differences that imply the need for additional assay evaluation prior to introduction into routine practice.
Asunto(s)
Pruebas de Química Clínica , Vitamina B 12 , Ferritinas , Hemoglobina Glucada , Humanos , Inmunoensayo/métodosRESUMEN
BACKGROUND: Current autoverification, which is only knowledge-based, has low efficiency. Regular historical data analysis may improve autoverification range determination. We attempted to enhance autoverification by selecting autoverification rules by knowledge and ranges from historical data. This new system was compared with the original knowledge-based system. METHODS: New types of rules, extreme values, and consistency checks were added and the autoverification workflow was rearranged to construct a framework. Criteria for creating rules for extreme value ranges, limit checks, consistency checks, and delta checks were determined by analyzing historical Zhongshan laboratory data. The new system's effectiveness was evaluated using pooled data from 20 centers. Efficiency improvement was assessed by a multicenter process. RESULTS: Effectiveness was evaluated by the true positive rate, true negative rate, and overall consistency rate, as compared to manual verification, which were 77.55%, 78.53%, and 78.3%, respectively for the new system. The original overall consistency rate was 56.2%. The new pass rates, indicating efficiency, were increased by 19%-51% among hospitals. Further customization using individualized data increased this rate. CONCLUSIONS: The improved system showed a comparable effectiveness and markedly increased efficiency. This transferable system could be further improved and popularized by utilizing historical data from each hospital.
Asunto(s)
Inteligencia Artificial , Automatización de Laboratorios , Pruebas de Química Clínica , Aplicaciones de la Informática Médica , Estudios de Factibilidad , Humanos , Bases del ConocimientoRESUMEN
OBJECTIVES: Interpretation of body fluid (BF) results is based on published studies and clinical guidelines. The aim of this study is to determine whether the assays from five common commercial vendors produce similar results in BFs for 12 analytes in a BF cohort. METHODS: BFs (nâ =â 25) and serum (nâ =â 5) were analyzed on five instruments (Roche cobas c501, Ortho 5600, Beckman AU5800 and DXI800, Siemens Vista 1500, and Abbott Architect c8000) to measure albumin, amylase, total bilirubin, cholesterol, creatinine, glucose, lactate dehydrogenase (LDH), lipase, total protein, triglycerides, urea nitrogen, and carcinoembryonic antigen. Deming regression and Bland-Altman analysis were used for method comparison to Roche. RESULTS: Results were significantly different from Roche for LDH and lipase on Ortho and lipase on Siemens but similar for both BFs and serum. BF differences were larger than serum differences when measuring creatinine, glucose, and urea nitrogen on Ortho and glucose on Siemens. CONCLUSIONS: Five instruments used to perform BF testing produce results that are not significantly different except for lipase and LDH measurements. Bias of similar magnitude observed in both BF and serum should not affect interpretation. Further investigations into Ortho and Siemens measuring glucose and Ortho measuring creatinine and urea nitrogen are warranted.
Asunto(s)
Líquidos Corporales , Pruebas de Química Clínica , Líquidos Corporales/química , Pruebas de Química Clínica/instrumentación , Creatinina/metabolismo , Glucosa , Humanos , L-Lactato Deshidrogenasa , Lipasa , Nitrógeno/metabolismo , UreaRESUMEN
INTRODUCTION: The interest in quality management tools/methodologies is gradually increasing to ensure quality and accurate results in line with international standards in clinical laboratories. Six Sigma stands apart from other methodologies with its total quality management system approach. However, the lack of standardization in tolerance limits restricts the advantages for the process. Our study aimed both to evaluate the applicability of analytical quality goals with Roche Cobas c 702 analyser and to determine achievable goals specific to the analyser used. MATERIALS AND METHODS: The study examined under two main headings as Sigmalaboratory and Sigmaanalyser. Sigmalaboratory was calculated using internal and external quality control data by using Roche Cobas c 702 analyser for 21 routine biochemistry parameters and, Sigmaanalyser calculation was based on the manufacturer data presented in the package inserts of the reagents used in our laboratory during the study. Sigma values were calculated with the six sigma formula. RESULTS: Considering the total number of targets achieved, Sigmaanalyser performed best by meeting all CLIA goals, while Sigmalaboratory showed the lowest performance relative to biological variation (BV) desirable goals. CONCLUSIONS: The balance between the applicability and analytical assurance of "goal-setting models" should be well established. Even if the package insert data provided by the manufacturer were used in our study, it was observed that almost a quarter of the evaluated analytes failed to achieve even "acceptable" level performance according to BV-based goals. Therefore, "state-of-the-art" goals for the Six Sigma methodology are considered to be more reasonable, achievable, and compatible with today's technologies.
Asunto(s)
Laboratorios Clínicos , Gestión de la Calidad Total , Pruebas de Química Clínica , Humanos , Control de Calidad , Estándares de ReferenciaRESUMEN
BACKGROUND: Results from laboratories using multiple instruments should be standardized or harmonized and comparability-verified for consistent quality control. We developed a simple frequent comparability verification methodology applicable to large healthcare centers using multiple clinical chemistry instruments from different manufacturers. METHODS: Comparability of five clinical chemistry instruments (Beckman Coulter AU5800, Abbott Architect Ci16000, two Siemens Vista 1500, and Ortho Vitros 5600) was evaluated from 2015 to 2019 for 12 clinical chemistry measurements. Pooled residual patient samples were used for weekly verifications. Results from any instrument exceeding the allowable verification range versus the results from the comparative instrument (AU5800) were reported to clinicians after being multiplied by conversion factors that were determined via a linear regression equation obtained from simplified comparison. RESULTS: Over the five-year study period, 432 weekly inter-instrument comparability verification results were obtained. Approximately 58% of results were converted due to non-comparable verification. Expected average absolute percent bias and percentage of non-comparable results for non-converted and converted results after conversion action were much lower than those for data measured before conversion action. The inter-instrument CV for both non-converted and converted results after conversion action was much lower than that for measured data before conversion action for all analytes. CONCLUSIONS: We maintained within-laboratory comparability of clinical chemistry tests from multiple instruments for five years using frequent low-labor periodic comparability verification methods from pooled residual sera. This methodology is applicable to large testing facilities using multiple instruments.
Asunto(s)
Química Clínica , Laboratorios , Pruebas de Química Clínica , Atención a la Salud , Humanos , Control de CalidadRESUMEN
Aging and age-related diseases represent hot topics of current research. Progressive damage in morphology and function of cells and tissue characterizes the normal process of aging that is influenced by both genetic and environmental factors. The ability of each individual to adapt to these stressors defines the type of aging and the onset of age-related diseases (i.e., metabolic syndrome, inflammatory disorders, cancer, and neurodegenerative diseases). The endocrine system plays a critical role in this process because of its complex relationships with brain, immune system, and skeletal muscle; thus, alterations in hormonal networks occur during aging to maintain homeostasis, with consequent under- or overactivity of specific hypothalamic-pituitary-peripheral hormone axes. On the other hand, the increase in life expectancy has led to increasing incidence of age-related diseases, including endocrine disorders, which may prompt assessment of endocrine function in aging individuals. In this context, there is growing awareness that natural changes of endocrine physiology and physiopathology occurring with increasing age may necessitate age-driven diagnostic cutoffs requiring validation in the elderly. This review aims to analyze the available literature on the hormone response to the most important dynamic tests currently used in the clinical practice for the screening of anterior pituitary-related diseases to underline pitfalls in interpretation during aging.
Asunto(s)
Envejecimiento/metabolismo , Hipopituitarismo/diagnóstico , Hipopituitarismo/metabolismo , Sistema Hipotálamo-Hipofisario/metabolismo , Animales , Pruebas de Química Clínica , HumanosRESUMEN
En los centros de Emergencia con poco apoyo de laboratorio, es difícil diferenciar a los pacientes con dengue grave y fiebre amarilla severa. El objetivo fue comparar el perfil clínico y de laboratorio de los pacientes con dengue grave y fiebre amarilla severa en Urgencias. Se realizó un estudio observacional retrospectivo de pacientes con diagnóstico confirmado de dengue y fiebre amarilla en el período 2018 a 2020 atendidos en la Unidad de Emergencia del Hospital Carrión, Huancayo-Perú. Se evaluaron un total de 35 pacientes, 11 pacientes (31,4%) fueron diagnosticados con fiebre amarilla severa y 24 pacientes (68,5%) con dengue grave. La media de los resultados de laboratorio con fiebre amarilla severa fueron bilirrubina indirecta 4,7 ml/dL, aspartato transaminasa 4463 UI/L, transaminasa aminotransferasa 4329 UI/L, creatinina 4,9 mg/dl. En pacientes con dengue grave el hematocrito promedio fue 51,8, hemoglobina 17,6 g/dl, plaquetas 24 × 103/mm. En pacientes con síndrome ictérico-febril la presencia de bradicardia, bilirrubina indirecta elevada y transaminasas muy elevadas debe hacer sospechar de fiebre amarilla; mientras que los pacientes que acuden por ascitis, derrame pleural, aumento de hematocrito y deficiencia de plaquetas, se debe tratar como dengue grave sobre todo en Unidades de Emergencia con poco apoyo de laboratorio(AU)
In Emergency centers with little laboratory support, differentiating patients with dengue and yellow fever is difficult. The Aim was to compare the clinical and laboratory profile of patients with severe dengue and severe yellow fever in the Emergency unit. We conducted a retrospective observational study of patients with a confirmed diagnosis of dengue and yellow fever in the period 2018 to 2020 treated in the Emergency Unit of the Carrión hospital, Huancayo-Peru. A total of 35 patients were evaluated, 11 patients (31.4%) were diagnosed with severe yellow fever and 24 patients (68.5%) with severe dengue. The mean laboratory results in patients with severe yellow fever were indirect bilirubin 4.7 ml/dL, aspartate transaminase 4463 IU/L, transaminase aminotransferase 4329 IU/L, creatinine 4.9 mg / dl. In patients with severe dengue were hematocrit 51.8, hemoglobin 17.6 g / dl, platelets 24 × 103 / mm. In patients with syndrome jaundice and fever the presence of bradycardia, elevated indirect bilirubin, and very elevated transaminases should be suspicious for yellow fever; while in patients who come for ascites, pleural effusion, increased hematocrit and platelet deficiency, it should be treated as severe dengue especially in Emergency Units with little laboratory support(AU)
Asunto(s)
Humanos , Masculino , Femenino , Adulto , Persona de Mediana Edad , Fiebre Amarilla/diagnóstico , Dengue Grave/diagnóstico , Pruebas de Química Clínica , Hematología , Bilirrubina/análisis , Plaquetas , Hemoglobinas , Creatina/análisisRESUMEN
Introdução: Os intervalos de referência (IRs) disponibilizados em laudos de exames laboratoriais orientam a interpretação dos resultados, respaldando a avaliação clínica realizada por profissionais de saúde. Objetivo: Validar IRs de parâmetros bioquímicos, com base nas características da população local, bem como em informações disponíveis nas bulas dos reagentes e na literatura científica. Material e Métodos: Foi realizado um estudo observacional, descritivo e transversal para padronização de IRs de trinta e quatro parâmetros bioquímicos, executados pelo laboratório de análises clínicas de um hospital universitário. Participaram do estudo quarenta indivíduos adultos, pareados pelo sexo, que responderam um questionário sobre o estado geral de saúde. Uma amostra de sangue foi coletada de cada participante e analisada conforme os padrões do laboratório. Resultados: Os dados obtidos com os voluntários saudáveis permitiram a validação dos IRs de albumina, alanina aminotransferase, amilase, aspartato aminotransferase, bilirrubina direta, bilirrubina indireta, bilirrubina total, cálcio iônico, capacidade total e latente de fixação de ferro, creatinoquinase fração MB, cloro, ferro, fosfatase alcalina, fósforo, gama glutamiltransferase, glicose, lipoproteína de alta densidade, lactato, lactato desidrogenase, lipase, magnésio, potássio, proteínas totais, saturação da transferrina, sódio, triglicerídeos e ureia, de ambos os sexos. Ácido úrico foi validado apenas para o sexo masculino e creatinoquinase total (CK) foi validado apenas para o sexo feminino. Conclusão: Os IRs contidos nas bulas destes reagentes representam a população atendida pelo laboratório e podem continuar sendo utilizados. Em contrapartida, os IRs dos analitos colesterol total, lipoproteína de baixa densidade, cálcio, ácido úrico feminino e CK masculino não foram validados e necessitam de novos estudos para a validação dos intervalos de referência utilizados
Introduction: The reference intervals (RIs) provided in laboratory test reports orientate the interpretation of results, supporting the clinical evaluation performed by health professionals. Objective: Validate RIs of biochemical parameters, based on the characteristics of the local population, as well as on information available in the package inserts of the reagents and in the scientific literature. Material and Methods: An observational, descriptive, and cross-sectional study was carried out for the standardization of RIs of thirty-four biochemical parameters, performed by the Clinical Analysis laboratory of a university hospital. Forty adult individuals, matched by sex, participated in the study, who answered a questionnaire about their general health status. A blood sample was taken from each participant and analyzed according to laboratory standards. Results: Data obtained from healthy volunteers allowed the validation of the RIs of albumin, alanine aminotransferase, amylase, aspartate aminotransferase, direct bilirubin, indirect bilirubin, total bilirubin, ionic calcium, total and latent iron-binding capacity, creatine kinase MB fraction, chlorine, iron, alkaline phosphatase, phosphorus, gamma glutamyltransferase, glucose, high density lipoprotein, lactate, lactate dehydrogenase, lipase, magnesium, potassium, total proteins, transferrin saturation, sodium, triglycerides and urea, of both sexes. Uric acid has been validated for males only and total creatine kinase (CK) has been validated for females only. Conclusion: The RIs contained in the package inserts of these reagents represent the population assisted by laboratory and can continue to be used. The RIs of total cholesterol, low-density lipoprotein, calcium, female uric acid and male CK analytes were not validated and require further studies to validate the reference intervals used
Asunto(s)
Valores de Referencia , Técnicas de Laboratorio Clínico , Personal de Salud , Pruebas de Química Clínica , Atención a la Salud , Hospitales UniversitariosRESUMEN
Background: A national proficiency test (PT) programme is not currently implemented in most low-income countries. However, participation in such PT programmes assists improves test performance and result accuracy.Objective: This study assessed how well 11 government hospital laboratories performed 18 basic clinical chemistry tests and identified areas needing improvement.Methods: A cross-sectional study was carried out by the Division of Laboratories of the Ministry of Health of Togo from 01 July 2016 to 31 December 2016. The test performance was evaluated using panels provided by One World Accuracy, Canada (Vancouver). The Clinical Laboratory Improvement Amendments criteria were used in evaluating the laboratories, and their success rates were compared with the World Health Organization Regional Office for Africa's target of 80%.Results: The overall rate of acceptable results at the laboratories was over 80% for glucose, alanine aminotransferase, aspartate aminotransferase, gamma-glutamyltransferase, alkaline phosphatase and triglycerides tests. The laboratories using fully automated spectrophotometers had an acceptable results rate of 89% (p = 0.001). The overall performance of the laboratories by cycles varied from 71% to 82%.Conclusion: This national PT programme identified the tests, which laboratories must improve their performance (urea, creatinine, uric acid, bilirubin, cholesterol, total protein, calcium, magnesium, phosphorus). It demonstrated the need for the use of routine appropriate internal quality control in all laboratories. The proficiency test programme should be extended to all clinical laboratories and target all biology disciplines
Asunto(s)
Masculino , Femenino , Control de Calidad , Pruebas de Química Clínica , Bioquímica , Técnicas de Laboratorio Clínico , Ingeniería , Rendimiento AcadémicoRESUMEN
Objective: This study aimed to determine the sigma metrics of analytes when using different total allowable error guidelines.Methods: A retrospective analysis was performed on 19 general chemistry analytes at Charlotte Maxeke Johannesburg Academic Hospital in South Africa between January 2017 and December 2017. Sigma metrics were calculated on two identical analysers, using internal quality control data and total allowable error guidelines from the Ricos biological variation database and three alternative sources (the Royal College of Pathologists of Australasia, the Clinical Laboratory Improvements Amendment, and the European Federation of Clinical Chemistry and Laboratory Medicine). Results: The sigma performance was similar on both analysers but varied based on the guideline used, with the Clinical Laboratory Improvements Amendment guidelines resulting in the best sigma metrics (53% of analytes on one analyser and 46% on the other had acceptable sigma metrics) and the Royal College of Pathologists of Australia guidelines being the most stringent (21% and 23%). Sodium and chloride performed poorly across all guidelines (sigma < 3). There were also month-to-month variations that may result in acceptable sigma despite poor performance during certain months.Conclusion: The sigma varies greatly depending on the total allowable error, but could be a valuable tool to save time and decrease costs in high-volume laboratories. Sigma metrics calculations need to be standardised
Asunto(s)
Control de Calidad , Patología , Gestión de la Calidad Total , Pruebas de Química Clínica , Errores Diagnósticos , LaboratoriosRESUMEN
BACKGROUND: Reference intervals (RIs) for clinical chemistry test parameters are specific to the method of measurement and population under service. However, there has been no locally available dry chemistry based RIs for the Nepalese population. Thus, the present study aimed to establish dry chemistry based RIs for sodium, potassium, urea, and creatinine specific to adult populations of Kaski districts, Nepal METHODS: This was a cross-sectional study conducted at the Manipal Teaching Hospital, Pokhara, Kaski, Nepal on 360 healthy adult participants aged 18-65 years. The test parameters under study were analyzed using a fully automated OCD Vitros 350 dry chemistry analyzer following the protocols provided by the reagent kit manufacturer. The RIs were estimated using reference limits at 2.5th and 97.5th percentiles. The normal distribution of the data was tested by Kolmogorov-Smirnov, and Shapiro-Wilk tests. The differences between males and females RIs were compared by the Mann-Whitney test while age-specific RIs for each sex was compared by One-Way-ANOVA and Dunnett's Multiple Comparisons Tests. All the data were managed and analyzed using MS Excel and SPSS version 20. RESULTS: The RIs of urea, creatinine, sodium, and potassium specific to the adult population of Kaski district, Nepal are as follows: urea: 4.20-13.70 mmol/L (males: 4.70-13.99; females: 4.20-13.23); creatinine: 44.20-106.10 µmol/L (males: 48.82-106.10; females: 35.40-83.78); sodium 135-146 mmol/L (males: 135-146; females: 135-146) and potassium 3.60-5.10 mmol/L (males: 3.54-5.0; females: 3.60-5.10). These RIs were found to be different from currently used RIs provided by the reagent manufacturer. RIs of all the test parameters were significantly influenced by the age of the study participants. However, only the RIs of urea, creatinine, and potassium were significantly influenced by sex. CONCLUSIONS: The present study has for the first time established dry chemistry based RIs for selected renal function test parameters specific to the adult population of Kaski district, Nepal. This result will aid the clinician in minimizing the errors in result interpretation and making a precise clinical decision.
Asunto(s)
Pruebas de Química Clínica/normas , Pruebas de Función Renal/normas , Adolescente , Adulto , Anciano , Estudios Transversales , Humanos , Persona de Mediana Edad , Nepal , Valores de Referencia , Adulto JovenRESUMEN
BACKGROUND: Six Sigma (6σ) is an efficient laboratory management method. We aimed to analyze the performance of immunology and protein analytes in terms of Six Sigma. METHODS: Assays were evaluated for these 10 immunology and protein analytes: Immunoglobulin G (IgG), Immunoglobulin A (IgA), Immunoglobulin M (IgM), Complement 3 (C3), Complement 4 (C4), Prealbumin (PA), Rheumatoid factor (RF), Anti streptolysin O (ASO), C-reactive protein (CRP), and Cystatin C (Cys C). The Sigma values were evaluated based on bias, four different allowable total error (TEa) and coefficient of variation (CV) at QC materials levels 1 and 2 in 2020. Sigma Method Decision Charts were established. Improvement measures of analytes with poor performance were recommended according to the quality goal index (QGI), and appropriate quality control rules were given according to the Sigma values. RESULTS: While using the TEaNCCL , 90% analytes had a world-class performance with σ>6, Cys C showed marginal performance with σ<4. While using minimum, desirable, and optimal biological variation of TEa, only three (IgG, IgM, and CRP), one (CRP), and one (CRP) analytes reached 6σ level, respectively. Based on σNCCL that is calculated from TEaNCCL , Sigma Method Decision Charts were constructed. For Cys C, five multi-rules (13s /22s /R4s /41s /6X , N = 6, R = 1, Batch length: 45) were adopted for QC management. The remaining analytes required only one QC rule (13s , N = 2, R = 1, Batch length: 1000). Cys C need to improve precision (QGI = 0.12). CONCLUSIONS: The laboratories should choose appropriate TEa goals and make judicious use of Sigma metrics as a quality improvement tool.
Asunto(s)
Anticuerpos/análisis , Pruebas de Química Clínica/normas , Proteínas/análisis , Control de Calidad , Gestión de la Calidad Total , HumanosRESUMEN
A single tumor marker is not enough to predict the breast pathologic complete response (bpCR) after neoadjuvant chemotherapy (NAC) in breast cancer patients. We aimed to establish a nomogram based on multiple clinicopathological features and routine serological indicators to predict bpCR after NAC in breast cancer patients. Data on clinical factors and laboratory indices of 130 breast cancer patients who underwent NAC and surgery in First Affiliated Hospital of Xi'an Jiaotong University from July 2017 to July 2019 were collected. Multivariable logistic regression analysis identified 11 independent indicators: body mass index, carbohydrate antigen 125, total protein, blood urea nitrogen, cystatin C, serum potassium, serum phosphorus, platelet distribution width, activated partial thromboplastin time, thrombin time, and hepatitis B surface antibodies. The nomogram was established based on these indicators. The 1000 bootstrap resampling internal verification calibration curve and the GiViTI calibration belt showed that the model was well calibrated. The Brier score of 0.095 indicated that the nomogram had a high accuracy. The area under the curve (AUC) of receiver operating characteristic (ROC) curve was 0.941 (95% confidence interval: 0.900-0.982) showed good discrimination of the model. In conclusion, this nomogram showed high accuracy and specificity and did not increase the economic burden of patients, thereby having a high clinical application value.