Experimental research on the influence of acid on the chemical and pore structure evolution characteristics of Wenjiaba tectonic coal.

The chemical and pore structures of coal play a crucial role in determining the content of free gas in coal reservoirs. This study focuses on investigating the impact of acidification transformation on the micro-physical and chemical structure characteristics of coal samples collected from Wenjiaba No. 1 Mine in Guizhou. The research involves a semi-quantitative analysis of the chemical structure parameters and crystal structure of coal samples before and after acidification using Fourier Transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) experiments. Additionally, the evolution characteristics of the pore structure are characterized through high-pressure mercury injection (HP-MIP), low-temperature nitrogen adsorption (LT-N2A), and scanning electron microscopy (SEM). The experimental findings reveal that the acid solution modifies the structural features of coal samples, weakening certain vibrational structures and altering the chemical composition. Specifically, the asymmetric vibration structure of aliphatic CH2, the asymmetric vibration of aliphatic CH3, and the symmetric vibration of CH2 are affected. This leads to a decrease in the contents of -OH and -NH functional groups while increasing aromatic structures. The crystal structure of coal samples primarily dissolves transversely after acidification, affecting intergranular spacing and average height. Acid treatment corrodes mineral particles within coal sample cracks, augmenting porosity, average pore diameter, and the ratio of macro-pores to transitional pores. Moreover, acidification increases fracture width and texture, enhancing the connectivity of the fracture structure in coal samples. These findings provide theoretical insights for optimizing coalbed methane (CBM) extraction and gas control strategies.

[Characteristics, Sources Apportionment, and Health Risks of PM2.5-bound PAHs and Their Derivatives Before and After Heating in Zibo City].

Atmospheric polycyclic aromatic hydrocarbons (PAHs) and their derivatives are a global problem that influences the environment and threatens human health. To investigate the characteristics, sources, and health risk assessment of PM2.5-bound PAHs and their derivatives, PM2.5 were collected at an urban site in Zibo from November 5 to December 26, 2020, and the concentrations of 16 conventional PAHs, nine NPAHs, and five OPAHs in PM2.5 were analyzed using gas chromatography-mass spectrometry. Source apportionment of PAHs and their derivatives was conducted using diagnostic ratios and a PMF model, and the health risks of PAHs and their derivatives to adult men and women were evaluated using the source-dependent incremental lifetime cancer risk (ILCR) model. The results showed that the average concentrations of ∑16pPAHs, ∑9NPAHs, and ∑5OPAHs in PM2.5 of Zibo City during the sampling period were (41.61 ± 13.40), (6.38 ± 5.70), and (53.20 ± 53.47) ng·m-3, respectively. The concentrations of the three PAHs increased significantly after heating, which were 1.31, 2.04, and 5.24 times larger than those before heating. During the sampling period, Chr, BaP, and BaA were the dominant components of pPAHs; 9N-Ant and 2N-Flt + 3N-Flt were the dominant components of NPAHs; and ATQ and BZO were the dominant components of OPAHs. Source apportionment results showed that motor vehicles were the main source of PAHs and their derivatives in PM2.5 before heating, whereas after heating, the main sources were the mixed source of coal and biomass combustion and secondary formation. The total BaP equivalent (TEQ) was 14.5 ng·m-3 during the sampling period, and the TEQ increased significantly after heating, which was approximately 1.2 times of that before heating. Assisted by the individual PAH source apportionment results, the ILCR of PM2.5-boundPAHs and NPAHs in Zibo City had a certain potential carcinogenic risk for adult males (1.06 × 10-5) and females (9.32 × 10-6). Among them, the health risks of PAHs from gasoline vehicles, diesel vehicles, and coal/biomass combustion were significantly higher than those from other emission sources.

Research and application of bag filter system for railway ballast bed coal suction vehicles: An optimization and application study.

The current bag filter system used by railway ballast bed coal suction vehicles for cleaning coal dust from railway tunnels has low operational efficiency and generates significant volumes of dust. This paper describes a simulation test unit designed to enhance the dust removal performance in railway tunnels. The flow field inside the simulation test unit is investigated under different operating conditions through numerical simulations, and the variations in air volume and working resistance, total dust collection efficiency, and optimal operating parameters of a pulse cleaning system are identified through a series of experiments. The numerical results show that the pulse cleaning system does not significantly affect the uniformity of the flow field distribution at the bottom of the filter cartridge during the process of operation. The experimental research indicates that the simulation test unit satisfies the design requirements, achieving an average total dust removal efficiency of 99.93%. A field application shows that the total dust mass concentration at the operator position can be reduced from 335.8 mg∙m-3 to 4.2 mg∙m-3, effectively improving the operating environment within the tunnel.

Major influencing factors identification and probabilistic health risk assessment of soil potentially toxic elements pollution in coal and metal mines across China: A systematic review.

Deposition of potentially toxic elements (PTEs) in soils due to different types of mining activities has been an increasingly important concern worldwide. Quantitative differences of soil PTEs contamination and related health risk among typical mines remain unclear. Herein, data from 110 coal mines and 168 metal mines across China were analyzed based on 265 published literatures to evaluate pollution characteristics, spatial distribution, and probabilistic health risks of soil PTEs. The results showed that PTE levels in soil from both mine types significantly exceeded background values. The geoaccumulation index (Igeo) revealed metal-mine soil pollution levels exceeded those of coal mines, with average Igeo values for Cd, Hg, As, Pb, Cu, and Zn being 3.02-15.60 times higher. Spearman correlation and redundancy analysis identified natural and anthropogenic factors affecting soil PTE contamination in both mine types. Mining activities posed a significant carcinogenic risk, with metal-mine soils showing a total carcinogenic risk an order of magnitude higher than in coal-mine soils. This study provides policymakers a quantitative foundation for developing differentiated strategies for sustainable remediation and risk-based management of PTEs in typical mining soils.

Abundance and sources of particulate polycyclic aromatic hydrocarbons and aromatic acids at an urban site in central China.

We conducted a simultaneous field study of PM2.5-bound particulate polycyclic aromatic hydrocarbons (PAHs) and aromatic acids (AAs) in a polluted city Zhengzhou to explore the concentration, sources and potential conversion pathways between PAHs and AAs in different seasons. The average concentrations of PM2.5, 28PAHs and 8AAs during the sampling period were 77 µg/m3, 75 ng/m3, and 283 ng/m3, respectively. The concentration of both 28PAHs and 8AAs were highest in winter and lowest in summer with ratios of 6.3 and 2.3, respectively. PAHs with 5-7 rings were the main components of PAHs (52%), followed by 4 rings PAHs (30%) and 2-3 rings PAHs (18%). According to the source appointment results obtained by positive matrix factorization, the main sources of PAHs were combustion and vehicle emissions, which account for 37% and 34%, respectively. 8AAs were divided into three groups, including four benzene dicarboxylic acids (B2CAs), three benzene tricarboxylic acids (B3CAs) and one benzene tetracarboxylic acid (B4CA). And interspecies correlation analysis with PM2.5 source markers were used to investigate potential sources. Phthalic acid (o-Ph) was the most abundant specie of 8AAs (157 ng/m3, 55% of 8AAs), which was well correlated with sulfate. Meanwhile, B3CAs and B4CA were highly correlated with sulfate and weakly correlated with levoglucosan, suggesting that secondary formation was their main source. As logical oxidation products of PAHs, o-Ph and B3CAs showed good correlations with a number of PAHs, indicating possible photochemical oxidation pathway by PAHs. In addition, O3, NO2, temperature and relative humidity have positive effects on the secondary formation of B3CAs.

Coal consumption and carbon emission reductions in BRICS countries.

The primary energy consumption structure of BRICS countries is dominated by fossil energy, particularly coal. Coal consumption in BRICS countries is a major driver underlying increased carbon emissions. Therefore, this study developed a spatiotemporal decoupling mode and incorporated factors related to coal consumption-induced carbon emissions into a spatiotemporal decoupling analysis method to provide differentiated and targeted policies for energy restructuring and emission reduction targets in BRICS countries. Moreover, a temporal-spatial decomposition logarithmic mean Divisia index model was developed using the spatiotemporal decoupling index method. The model is based on CO2 emissions generated by coal consumption in BRICS countries, with a primary focus on data from Brazil, Russia, South Africa, India, and China. The findings reveal distinct spatiotemporal distributions and driving effects of coal consumption and carbon dioxide emissions across various countries. Factors such as CO2 emission intensity, coal consumption intensity, economic output per capita, and population structure exerted either positive or negative effects on the distributional effect of the carbon emission-economic output per capita association in BRICS countries. Additionally, country-level heterogeneity in the influence of the distributional effects of CO2 emissions was observed within each BRICS country. Thus, different policies are needed to achieve carbon emission reduction targets in different countries.

VOC source apportionment, reactivity, secondary transformations, and their prioritization using fuzzy-AHP method in a coal-mining city in India.

This study assessed the air quality status in different functional zones of Dhanbad-a coal-mining and industrial hub, based on the measurement of aromatic and halogenated volatile organic compounds (VOCs) using gas chromatography. The study encompasses source apportionment of VOCs and their chemical reactivity in terms of OH radical loss rate (LOH), ozone-forming potential (OFP), and their secondary organic aerosol forming potential (SOAp). Furthermore, prioritization of VOCs based on a fuzzy-analytical hierarchical process (F-AHP) has also been done. The results found xylene species to have the highest concentration in all three seasons across traffic-intersection and industrial zones and toluene at the institutional zone. The study identified four sources using positive matrix factorization (PMF) model, viz., mixed traffic exhaust (35%), coal combustion sources (30%), industrial (26%), and solvent usage (9%). LOH and SOAp were ~ 16 times more at the industrial and traffic-intersection zone than the institutional zone. The aromatic species contributed 97% to the OFP, and many species exhibited less contribution to the mixing ratio of VOCs but displayed a high contribution to LOH, OFP, and SOAp, suggesting the need to prefer reactivity-based strategies in addition to concentration-based strategies in the future for their regulation. The F-AHP-based priority component analysis identified 16 species out of 29 in the priority watch list (nine in tier-1, four in tier-2, and three in tier-3). The paucity of data and lack of ambient air quality standards on VOCs (except benzene) make it difficult to determine which aspect should be dealt with first and which species require more attention. Therefore, the F-AHP method used in this study could help identify the influencing parameters to be considered while devising efficient VOC management policies.

Synergistic consideration of co-treatment of sewage sludge, low-rank coal, and straw for sustainable resource utilization and enhanced energy efficiency: a review.

This article provides a comprehensive exploration of the imperative necessity for coupling the utilization of low-rank coal, sewage sludge, and straw. It studies the challenges and limitations of individual utilization methods, addressing the unique hurdles associated with feedstocks. It focused on achieving integrated and sustainable resource management, emphasizing efficient resource utilization, waste minimization, and environmental impact reduction. The investigation extends to the intricate details of reaction processes in co-processing, with a specific emphasis on the drying of raw materials to enhance combustion characteristics. The molding and preparation of feedstock are dissected, encompassing raw material selection, mixing, and the crucial addition of additives and binders. The proportions and homogenization of these feedstocks are intricately examined for uniformity and effectiveness. Furthermore, it presents theoretical approaches for investigating the co-combustion of these diverse feedstocks, contributing a solid foundation for future studies in this dynamic field. The findings presented in it offer valuable insights for researchers, practitioners, and policymakers seeking sustainable solutions in the co-disposal technology of these feedstocks. Therefore, it provides a holistic understanding of the challenges and opportunities in coupling the utilization of these selected feedstocks. By addressing individual limitations and emphasizing integrated resource management, the article establishes the groundwork for sustainable and efficient co-processing practices. The exploration of reaction processes gives a comprehensive framework for future research and application in the field of co-combustion technology. The insights gleaned from this study contribute significantly to advancing knowledge in the sustainable utilization of diverse feedstocks, guiding efforts towards environmentally responsible and resource-efficient practices.

Potential toxic components in size-resolved particles and gas from residential combustion: Emission factor and health risk.

Particulate matter (PM) from residential combustion is an existential threat to human health. Emission factors (EFs) of multiple potential toxic components (PTCs) in size-resolved PM and gas from eight residential fuel combustion were measured, and size distribution, gas/particle partitioning and health risks of the PTCs were investigated. Average EFs from clean coal and anthracite coal were PTEs (sum of EFs of 11 Potential Toxic Elements, 6.62 mg/kg fuels) > PAHs (sum of 22 Polycyclic Aromatic Hydrocarbons, 1.12 mg/kg) > OPAHs (sum of 5 Oxygenated Polycyclic Aromatic Hydrocarbons, 0.45 mg/kg) > PAEs (sum of 6 Phthalate Esters, 0.11 mg/kg) > NPAHs (sum of 14 Nitropolycyclic Aromatic Hydrocarbons, 16.84 µg/kg) > OPEs (sum of 7 Organophosphate Esters, 7.57 µg/kg) > PCBs (sum of 6 Polychorinated Biphenyls, 0.07 µg/kg), which were 2-3 and 1-2 orders of magnitude lower than the EFs of PTCs (except PTEs) from bituminous coal and biomass. Most PAHs, OPAHs and NPAHs, which may mainly originate from chemical reactions, showed similar size distributions and averagely 85 % concentrated in PM1. PTEs, PAEs, OPEs and PCBs generated from the release from raw fuels may have a higher proportion, so their size distributions were more complex and varied with combustion temperature, volatility of compounds, binding mode of the raw fuels, and so on. In addition, clean coal and high-quality anthracite coal could reduce the health risks from the potential organic toxic components, but also reveal the stumbling block of PTEs in risk control.

Effects of alkali and alkaline earth metals on co-combustion of sewage sludge and coal slime: Combustion characteristics, interactions, and kinetics.

The co-combustion of sewage sludge (SS) and coal slime (CS) is a preferred method for their resource utilization, however, alkali and alkaline earth metals (AAEMs) in SS may affect the co-combustion process. In this work, the co-combustion behavior of AAEMs-rich SS and CS was investigated in terms of combustion characteristics, interactions, and combustion kinetics using a thermogravimetric analyzer. Further, the role of AAEMs in co-combustion was evaluated by loading Ca, K, Na, and Mg individually after pickling. The results revealed that co-combustion compensated for the limitations of the individual combustion processes, with SS reducing ignition and burnout temperatures and CS improving the comprehensive combustion characterization. Principal component analysis (PCA) showed that the effect of CS on co-combustion was more significant compared to SS. Significant synergies were observed in the weight loss phase of fixed carbon in the blends with 40%, 50%, and 60% CS ratios, where the peak temperature of fixed carbon combustion was reduced by 9.8 °C, 12.6 °C, and 13.1 °C, respectively, compared to the theoretical values. The effects of AAEMs on combustion were as follows: all AAEMs promoted the precipitation of volatiles except Ca, which showed inhibition of light volatiles; AAEMs had a significant catalytic effect on fixed carbon combustion. The improvement effect of AAEMs on the comprehensive combustion characteristics during co-combustion was Na > K > Mg > Ca. The catalytic effect of Na on fixed carbon was strongest at a loading of 5%, leading to a decrease in the apparent activation energy of fixed carbon combustion by 22.2 kJ/mol and a change in reactor order from n = 1 to n = 1.2 during co-combustion. This work provides a better understanding of the role of AAEMs in SS-CS co-combustion.

Environmental impact assessment of acidic coal gangue leaching solution on groundwater: a coal gangue pile in Shanxi, China.

With the continual advancement of coal resource development, the comprehensive utilization of coal gangue as a by-product encounters certain constraints. A substantial amount of untreated coal gangue is openly stored, particularly acidic gangue exposed to rainfall. The leaching effect of acidic solutions, containing heavy metal ions and other pollutants, results in environmental challenges such as local soil or groundwater pollution, presenting a significant concern in the current ecological landscape of mining areas. Investigating the migration patterns of pollutants in the soil-groundwater system and elucidating the characteristics of polluted solute migration are imperative. To understand the migration dynamics of pollutants and unveil the features of solute migration, this study focuses on a coal gangue dump in a mining area in Shanxi. Utilizing indoor leaching experiments and soil column migration experiments, a two-dimensional soil-groundwater model is established using the finite element method of COMSOL. This model quantitatively delineates the migration patterns of key pollutant components leached from coal gangue into the groundwater. The findings reveal that sulfate ions can migrate and infiltrate groundwater within a mere 7 years in the vadose zone of aeration. Moreover, the average concentration of iron ions in groundwater can reach approximately 58.3 mg/L. Convection, hydrodynamic dispersion, and adsorption emerge as the primary factors influencing pollution transport. Understanding the leaching patterns and environmental impacts of major pollutants in acidic coal gangue is crucial for predicting soil-groundwater pollution and implementing effective protective measures.

Dynamic characteristics of scraper conveyor chain drive system under the impact condition of lump coal.

Scraper conveyor is the most important transportation equipment in the comprehensive mining equipment, and the chain drive system is its core subsystem, its dynamic characteristics will significantly affect the efficiency of coal transportation in the comprehensive mining face. In this paper, the dynamic characteristics of chain drive system when impacted by falling coal are investigated by means of test. The impact test bench of scraper conveyor was set up to analyze the effects of chain speed, impact height and impact load mass on the dynamic characteristics of the chain drive system of scraper conveyor under the working conditions of unloaded and loaded. The results show that the longitudinal vibration of the scraper conveyor is most obvious when it is impacted by the falling coal, and the chain speed, impact height and impact load mass of the scraper conveyor all play an excitation role on the vibration of the chain drive system, and the vibration of the chain ring is the most intense in the chain drive system, and the loaded coal pile conveyed on the scraper conveyor plays an inhibiting role on the vibration of the chain drive system. This study can help to identify the location where the scraper conveyor fails first in the impact condition, so as to provide a basis for its structural design and improvement, which is of great significance for the stable operation and structural optimization of the scraper conveyor.

Insights into PM2.5 pollution of four small and medium-sized cities in Chinese representative regions: Chemical compositions, sources and health risks.

Fine particles (PM2.5) pollution is still a severe issue in some cities in China, where the chemical characteristics of PM2.5 remain unclear due to limited studies there. Herein, we focused on PM2.5 pollution in small and medium-sized cities in key urban agglomerations and conducted a comprehensive study on the PM2.5 chemical characteristics, sources, and health risks. In the autumn and winter of 2019-2020, PM2.5 samples were collected simultaneously in four small and medium-sized cities in four key regions: Dingzhou (Beijing-Tianjin-Hebei region), Weinan (Fenwei Plain region), Fukang (Northern Slope of the Tianshan Mountain region), and Bozhou (Yangtze River Delta region). The results showed that secondary inorganic ions (43.1 %-67.0 %) and organic matter (OM, 8.6 %-36.4 %) were the main components of PM2.5 in all the cities. Specifically, Fukang with the most severe PM2.5 pollution had the highest proportion of SO42- (31.2 %), while the dominant components in other cities were NO3- and OM. The Multilinear Engine 2 (ME2) analysis identified five sources of PM2.5 in these cities. Coal combustion contributed most to PM2.5 in Fukang, but secondary sources in other cities. Combined with chemical characteristics and ME2 analysis, it was preliminarily determined that the primary emission of coal combustion had an important contribution to high SO42- in Fukang. Potential source contribution function (PSCF) analysis results showed that regional transport played an important role in PM2.5 in Dingzhou, Weinan and Bozhou, while PM2.5 in Fukang was mainly affected by short-range transport from surrounding areas. Finally, the health risk assessment indicated Mn was the dominant contributor to the total non-carcinogenic risks and Cr had higher carcinogenic risks in all cities. The findings provide a scientific basis for formulating more effective abatement strategies for PM2.5 pollution.

Indoor PM from residential coal combustion: Levels, chemical composition, and toxicity.

Indoor air quality is crucial for human health due to the significant time people spend at home, and it is mainly affected by internal sources such as solid fuel combustion for heating. This study investigated the indoor air quality and health implications associated with residential coal burning covering gaseous pollutants (CO, CO2 and total volatile organic compounds), particulate matter, and toxicity. The PM10 chemical composition was obtained by ICP-MS/OES (elements), ion chromatography (water-soluble ions) and thermal-optical analysis (organic and elemental carbon). During coal combustion, PM10 levels were higher (up to 8.8 times) than background levels and the indoor-to-outdoor ratios were, on average, greater than unity, confirming the existence of a significant indoor source. The chemical characterisation of PM10 revealed increased concentrations of organic carbon and elemental carbon during coal combustion as well as arsenic, cadmium and lead. Carcinogenic risks associated with exposure to arsenic exceeded safety thresholds. Indoor air quality fluctuated during the study, with varying toxicity levels assessed using the Aliivibrio fischeri bioluminescence inhibition assay. These findings underscore the importance of mitigating indoor air pollution associated with coal burning and highlight the potential health risks from long-term exposure. Effective interventions are needed to improve indoor air quality and reduce health risks in coal-burning households.

Study on inverse geochemical modeling of hydrochemical characteristics and genesis of groundwater system in coal mine area - a case study of Longwanggou Coal Mine in Ordos Basin.

The exploitation of coal resources has disturbed the equilibrium of the original groundwater system, resulting in a perturbation of the deep groundwater dynamic conditions and hydrochemical properties. Exploring the formation of mine water chemistry under the conditions of deep coal seam mining in the Ordos Basin provides a theoretical basis for the identification of sources of mine water intrusion and the development and utilization of water resources. This paper takes Longwanggou Coal Mine as the research area, collects a total of 106 groups of water samples from the main water-filled aquifers, comprehensively uses Piper trilinear diagram, Gibbs diagram, ion correlation, ion ratio coefficient and mineral saturation index analysis, and carries out inverse geochemical modeling with PHREEQC software, so as to analyze the hydrochemical characteristics and causes of the main water-filled aquifers in deep-buried coal seams in the research area. The results show that the main hydrochemical processes in the study area are leaching and cation exchange, and the groundwater is affected by carbonate (calcite, dolomite), silicate (gypsum) and evaporite. Calculations of mineral saturation indices and PHREEQC simulations have led to the conclusion that the dissolution of rock salt and gypsum in groundwater accounts for most of the ionic action. Na+, Cl- and SO42- are mainly derived from the dissolution of rock salt and gypsum minerals, while Ca2+ and Mg2+ are mostly derived from the dissolution of dolomite and calcite. The results of the inverse geochemical modeling are consistent with the theoretical analysis.

Identification of sources and analysis of spatial distribution of soil heavy metals in northern China coal mining areas.

The mining and utilization of coal resources has not only promoted rapid economic development but also poses a potential threat to the ecological environment. The purpose of this study is to clarify the effects both of mining and land use types on the spatial distribution and particular sources of heavy metals in soil, using inverse distance weighted (IDW) and the Positive Matrix Factorization (PMF) model. A total of 99 topsoil and profile soil samples across different land use types and mining conditions were collected. The contamination of soil with Cd, Pb, and Hg in the research area was most severe, with the coefficient of variation (CV) of Hg being the largest, while also being heavily influenced by human activities. Severely polluted regions were mainly distributed in the center of the coal mining area, as well as near the highway. The contents of heavy metals for various land use patterns were ranked as follows: forestland > farmland > bare land > grassland > building land. Hg, Cd, Pb, Cr, and Zn had showed migration in the 0-60 cm depth range, and the enrichment factors (EFs) of Cd, Pb, Hg, and As in the soil profile were the most significant. The PMF demonstrated that the contributions of industrial activities and atmospheric deposition, transportation and mining activities, agricultural activities, and natural sources accounted for 31.25%, 28.13%, 22.24%, and 18.38%, respectively. The migration and deposition of atmospheric particulate matter from coal mining, transportation, and coal combustion under winds triggered heavy metal contamination in semi-arid areas of northern China. This phenomenon has important implications for the prevention and reduction of heavy metal pollution through various effective measures in coal-mining cities in northern China.

Life-Course Health Risk Assessment of PM2.5 Elements in China: Exposure Disparities by Species, Source, Age, Gender, and Location.

Key stages in people's lives have particular relevance for their health; the life-course approach stresses the importance of these stages. Here, we applied a life-course approach to analyze the health risks associated with PM2.5-bound elements, which were measured at three sites with varying environmental conditions in eastern China. Road traffic was found to be the primary source of PM2.5-bound elements at all three locations, but coal combustion was identified as the most important factor to induce both cancer risk (CR) and noncancer risk (NCR) across all age groups due to the higher toxicity of elements such as As and Pb associated with coal. Nearly half of NCR and over 90% of CR occurred in childhood (1-6 years) and adulthood (>18 years), respectively, and females have slightly higher NCR and lower CR than males. Rural population is found to be subject to the highest health risks. Synthesizing previous relevant studies and nationwide PM2.5 concentration measurements, we reveal ubiquitous and large urban-rural environmental exposure disparities over China.

Air quality and health benefits for different heating decarbonization pathways in China.

The urgent need for decarbonization in China's heating system, comprised of approximately one hundred thousand boilers, is imperative to meet climate and clean air objectives. To formulate national and regional strategies, we developed an integrated model framework that combines a facility-level emission inventory, the Community Multiscale Air Quality (CMAQ) model, and the Global Exposure Mortality Model (GEMM). We then explore the air quality and health benefits of alternative heating decarbonization pathways, including the retirement of coal-fired industrial boilers (CFIBs) for replacement with grid-bound heat supply systems, coal-to-gas conversion, and coal-to-biomass conversion. The gas replacement pathway shows the greatest potential for reducing PM2.5 concentration by 2.8 (2.3-3.4) µg/m3 by 2060, avoiding 23,100 (19,600-26,500) premature deaths. In comparison, the biomass replacement pathway offers slightly lower environmental and health benefits, but is likely to reduce costs by approximately two-thirds. Provincially, optimal pathways vary - Xinjiang, Sichuan, and Chongqing favor coal-to-gas conversion, while Shandong, Henan, Hebei, Inner Mongolia, and Shanxi show promise in CFIBs retirement. Henan leads in environmental and health benefits. Liaoning, Heilongjiang, and Jilin, rich in biomass resources, present opportunities for coal-to-biomass conversion.

Fine particle trace elements at a mountain site in southern China: Source identification, transport, and health risks.

Trace elements in atmospheric particulate matter play a significant role in air quality, human health, and biogeochemical cycles. In this study, the trace elements (Ca, Al, K, Fe, Na, Mg, Zn, Pb, Mn, Ti, Cu, Cr, Sr, Ni) in PM2.5 samples collected at the summit of Mt. Lushan were analyzed to quantify their abundance, source, transport, and health risks. During the whole sampling period, the major trace elements was Ca, Al, and K. While the trace metals with the lowest concentrations were Sr, Ni, Rb, and Cd. The trace elements were influenced by air mass transport routes, exhibiting an increasing trend of crustal elements in the northwesterly airmass and anthropogenic elements (Zn, Mn, Cu, and Ni) in the easterly air masses. Construction dust, coal + biomass burning, vehicle emission, urban nitrate-rich + urban waste incineration emissions, and soil dust + industry emissions were common sources of PM2.5 on Mt. Lushan. Different air mass transport routes had various source contribution patterns. These results indicate that trace elements at Mt. Lushan are influenced by regional anthropogenic emissions and monsoon-dominated trace element transport. The total resulting cancer risk value that these elements posed were below the acceptable risk value of 1 × 10-6, while the non-carcinogenic risk value (1.72) was higher than the safety level, suggesting that non-carcinogenic effects due to these trace elements inhalation were likely to occur. Vehicle emission and coal + biomass burning were the common dominant sources of non-cancer risks posed by trace elements at Mt. Lushan.

Research on factors affecting the spread of dust pollution in conveyor belt workshop and research on wet dust reduction technology.

At this stage, there are many dust-hazardous industries, and occupational pneumoconiosis has a high incidence for a long time. To solve the dust pollution problem in coal processing plant workshops, the dust particle field and liquid droplet particle field were numerically simulated using computational fluid dynamics (CFD), and the influences of the induced airflow and corridor wind speed on the internal airflow field of the workshop were investigated to derive the dust pollution mechanism in the coal plant workshop under the change in the wind flow field. In this study, it was shown that the wind flow rate in the coal processing plant workshop is mainly affected by the corridor wind speed, and the higher the corridor wind speed is, the higher the wind flow rate. The induced airflow mainly affected the direction of the wind flow field in the workshop. According to the conclusions obtained from the simulations, a spray dust reduction system was designed for the coal processing plant workshop and applied in the Huangyuchuan coal processing plant. On-site measurement revealed that the dust reduction effect inside the coal processing plant workshop is obvious, and the overall dust reduction efficiency in the workshop reaches more than 94%, which meets the requirements of environmentally sustainable development and clean production.