Polymer Coatings Affect Transport and Remobilization of Colloidal Activated Carbon in Saturated Sand Columns: Implications for In Situ Groundwater Remediation.

Colloidal activated carbon (CAC) is an emerging technology for the in situ remediation of groundwater impacted by per- and polyfluoroalkyl substances (PFAS). In assessing the long-term effectiveness of a CAC barrier, it is crucial to evaluate the potential of emplaced CAC particles to be remobilized and migrate away from the sorptive barrier. We examine the effect of two polymer stabilizers, carboxymethyl cellulose (CMC) and polydiallyldimethylammonium chloride (PolyDM), on CAC deposition and remobilization in saturated sand columns. CMC-modified CAC showed high mobility in a wide ionic strength (IS) range from 0.1 to 100 mM, which is favorable for CAC delivery at a sufficient scale. Interestingly, the mobility of PolyDM-modified CAC was high at low IS (0.1 mM) but greatly reduced at high IS (100 mM). Notably, significant remobilization (release) of deposited CMC-CAC particles occurred upon the introduction of solution with low IS following deposition at high IS. In contrast, PolyDM-CAC did not undergo any remobilization following deposition due to its favorable interactions with the quartz sand. We further elucidated the CAC deposition and remobilization behaviors by analyzing colloid-collector interactions through the application of Derjaguin-Landau-Verwey-Overbeek theory, and the inclusion of a discrete representation of charge heterogeneity on the quartz sand surface. The classical colloid filtration theory was also employed to estimate the travel distance of CAC in saturated columns. Our results underscore the roles of polymer coatings and solution chemistry in CAC transport, providing valuable guidelines for the design of in situ CAC remediation with maximized delivery efficiency and barrier longevity.

Comprehensive analysis of colloid formation, distribution, and properties of monovarietal red wines using asymmetrical flow field-flow fractionation with online multidetection.

Red wine colloids, crucial in determining wine quality and stability, are understudied due to inadequate techniques for studying them effectively in the natural wine environment. Recently, Asymmetrical Flow Field-flow Fractionation (AF4) with online multidetection has emerged as a novel analytical tool for quantifying, fractionating, and characterizing red wine colloids in their native state. This study aimed to characterize the colloidal composition of 24 monovarietal Italian wines produced without filtration, oak contact, fining treatments, malolactic fermentation, macerating enzymes or ageing on yeast lees. AF4 analysis allowed quantification and characterization of wine colloids based on light scattering signal (MALS; gyration radius - Rg), size (hydrodynamic radius - Rh) and absorbance (A280 & A520 nm). The results showed that each wine contained up to five distinct colloids' populations, varying in size and gyration radii. Despite possessing very similar Rh, most colloids exhibited great differences in compactness, as indicated by their varying Rg values. Comparing the A280 signal of whole wines to those of wines containing only species larger than 5 kDa (considered colloids) allowed to calculate the percentage of molecules involved in colloidal particles assembly, ranging from 1 to 44 % of the total A280 absorbing compounds, reflecting the diversity among wines. The A520 signal indicated the presence of polymeric pigments in the colloidal fraction. Notably, colored colloids all had Rg > 20 nm, indicating their association with other colloidal-forming compounds. This observation led to the conclusion that, apart from free anthocyanins and polymeric pigments, the color of red wines is also due to colloidal particles formed by the latter bound to proteins, with their quantity being highly variable across wines of different origin. These findings, which highlight the fundamental role of proteins in shaping the colloidal status of red wines, were utilized to propose an updated hypothetical model for colloidal aggregation in red wine.

Diamond-lattice photonic crystals assembled from DNA origami.

Colloidal self-assembly allows rational design of structures on the micrometer and submicrometer scale. One architecture that can generate complete three-dimensional photonic bandgaps is the diamond cubic lattice, which has remained difficult to realize at length scales comparable with the wavelength of visible or ultraviolet light. In this work, we demonstrate three-dimensional photonic crystals self-assembled from DNA origami that act as precisely programmable patchy colloids. Our DNA-based nanoscale tetrapods crystallize into a rod-connected diamond cubic lattice with a periodicity of 170 nanometers. This structure serves as a scaffold for atomic-layer deposition of high-refractive index materials such as titanium dioxide, yielding a tunable photonic bandgap in the near-ultraviolet.

The influence of solvent refractive index on the photoluminescence decay of thick-shell gradient-alloyed colloidal quantum dots investigated in a wide range of delay times.

Colloidal semiconductor quantum dots have many potential optical applications, including quantum dot light-emitting diodes, single-photon sources, or biological luminescent markers. The optical properties of colloidal quantum dots can be affected by their dielectric environment. This study investigated the photoluminescence (PL) decay of thick-shell gradient-alloyed colloidal semiconductor quantum dots as a function of solvent refractive index. These measurements were conducted in a wide range of delay times to account for both the initial spontaneous decay of excitons and the delayed emission of excitons that has the form of a power law. It is shown that whereas the initial spontaneous PL decay is very sensitive to the refractive index of the solvent, the power-law delayed emission of excitons is not. Our results seem to exclude the possibility of carrier self-trapping in the considered solvents and suggest the existence of trap states inside the quantum dots. Finally, our data show that the average exciton lifetime significantly decreases as a function of the solvent refractive index. The change in exciton lifetime is qualitatively modeled and discussed.

Hydrocolloid-based nutraceutical delivery systems: Potential of κ-carrageenan hydrogel beads for sustained release of curcumin.

This study investigates the potential of κ-carrageenan hydrogel beads as a delivery system for curcumin, a bioactive compound with various health benefits. Hydrogel beads were prepared using the extrusion technique with a hypodermic needle. The encapsulation efficiency of curcumin in the κ-carrageenan hydrogel beads was found to be 74.61 ± 3.2 %. FTIR spectroscopy analysis revealed shifts in absorption peaks, indicating possible hydrogen bonding and/or ionic interactions between the polymer and salt. An increase in the melting point of curcumin, by 25 °C, in curcumin- κ-carrageenan beads suggests the heat protection offered by the carrageenan chains to curcumin molecules. The in vitro release of curcumin from the beads suggests a sustained and pH-dependent release nature. The release kinetics follow the first order and the Korsmeyer-Peppas model. The outcome offers value-added delivery systems of bioactive compounds toward developing novel food and pharmaceutical applications.

Adsorption-desorption of 241Am(â ¢) on montmorillonite colloids and quartz sand: Effects of pH, ionic strength, colloid concentration and grain size.

Clay colloids in the subsurface environment have a strong adsorption capacity for radionuclides, and the mobile colloids will carry the nuclides for migration, which would promote the movability of radionuclides in the groundwater environment and pose a threat to the ecosphere. The investigations of the adsorption/desorption behaviors of radionuclides in colloids and porous media are significant for the evaluation of the geological disposal of radioactive wastes. To illustrate the adsorption/desorption behaviors of 241Am(Ⅲ) in Na-montmorillonite colloid and/or quartz sand systems at different pH (5, 7 and 9), ionic strengths (0, 0.1 and 5 mM), colloid concentrations (300 and 900 mg/L), nuclide concentrations (500, 800, 1100 and 1400 Bq/mL) and grain sizes (40 and 60 mesh), a series of batch sorption-desorption experiments were conducted. Combining the analysis of the physical and chemical properties of Na-montmorillonite with the Freundlich model, the influencing mechanism of different controlling factors is discussed. The experimental results show that the adsorption/desorption behaviors of 241Am(Ⅲ) in Na-montmorillonite colloid and/or quartz sand strongly are influenced by the pH value and ionic strength of a solution, the colloid concentration as well as quartz sand grain size. The adsorption and desorption isotherms within all the experimental conditions could be well-fitted by the Freundlich model and the correlation coefficients (R2) are bigger than 0.9. With the increase in pH, the adsorption partition coefficient (Kd) at 241Am(Ⅲ)-Na-montmorillonite colloid two-phase system and 241Am(Ⅲ)-Na-montmorillonite colloid-quartz sand three-phase system presents a trend which increases firstly followed by decreasing, due to the changes in the morphology of Am with pH. The Kd of 241Am(Ⅲ) adsorption on montmorillonite colloid and quartz sand decreases with increasing in ionic strength, which is mainly attributed to the competitive adsorption, surface complexation and the reduction of surface zeta potential. Additionally, the Kd increases with increasing colloid concentrations because of the increase in adsorption sites. When the mean grain diameter changes from 0.45 to 0.3 mm, the adsorption variation trends of 241Am(Ⅲ) remain basically unchanged. The research results obtained in this work are meaningful and helpful in understanding the migration behaviors of radionuclides in the underground environment.

Cotransport of aged biochar colloids and thallium(I) in water-saturated porous media: Impact of the ionic strength, pH and aging degree.

Biochar colloids entering the soil undergo aging over time and exhibit strong capabilities in adsorbing and transporting pollutants. Therefore, investigating the cotransport of aged biochar colloids and thallium (Tl(I)) in quartz sand media is crucial for understanding Tl(I) migration in underground environments. This study investigated the migration of biochar colloids with two different aging degrees and Tl(I) in quartz sand media at various pH and ionic strengths (ISs). The results revealed that under all ISs and pH, 30%AWB (biochar aged with 30 % (w/w) HNO3) inhibited Tl(I) migration in media. This inhibition primarily arose from the introduction of hydroxyl and carboxyl groups during aging, which significantly enhanced colloid adsorption onto Tl(I). At lower ISs, 30%AWB colloids exhibited greater inhibition of Tl(I) migration due to their increased adsorption capacity. Additionally, aging promoted the migration of biochar colloids in the media. Greater biochar aging notably enhanced this promotion, potentially owing to reduced colloidal particle size and the formation of biochar derivatives. Moreover, 50%AWB (biochar aged with 50 % (w/w) HNO3) inhibited Tl(I) migration under low ISs but had almost no impact under high ISs. Nonetheless, at high pH, 50%AWB colloids facilitated Tl(I) migration. This phenomenon might be attributed to the inhibitory effect of aged biochar colloids on Tl(I) adsorption onto media at a high pH, as well as the stable binding between Tl(I) and aged biochar colloids. This study discusses the cotransport of biochar with various degrees of aging and Tl(I) in media, providing insights into remediating soils contaminated with Tl.

Effect of the Photoreduction Process on the Self-Cleaning and Antibacterial Activity of Au-Doped TiO2 Colloids on Cotton Fabric.

This study aims at understanding the effect of the photoreduction process during the synthesis of gold (Au)-doped TiO2 colloids on the conferred functionalities on cotton fabrics. TiO2/Au and TiO2/Au/SiO2 colloids were synthesized through the sol-gel method with and without undergoing the photoreduction step based on different molar ratios of Au:Ti (0.001 and 0.01) and TiO2/SiO2 (1:1 and 1:2.3). The colloids were applied to cotton fabrics, and the obtained photocatalytic self-cleaning, wet photocatalytic activity, UV protection, and antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria were investigated. The obtained results demonstrated that the photoreduction of Au weakened the self-cleaning effect and reduced the photocatalytic activity of coated fabrics. Also, an excess amount of Au deteriorated the photocatalytic activity under both UV and visible light. The most efficient self-cleaning effect was obtained on fabrics coated with a ternary TiO2/Au/SiO2 colloid containing ionic Au, where it decomposed coffee and red-wine stains after 3 h of illumination. Adding silica (SiO2) made the fabrics superhydrophilic and led to greater methylene blue (MB) dye adsorption, a faster dye degradation pace, and more efficient stain removal. Moreover, the photoreduction process affected the size of Au nanoparticles (NPs), weakened the antibacterial activity of fabrics against both types of tested bacteria, and modestly increased the UV protection. In general, the photoactivity of Au-doped colloids was influenced by the synthesis method, the ionic and metallic states of the Au dopant, the concentration of the Au dopant, and the presence and concentration of silica.

A supramolecular colloidal system based on folate-conjugated ß-cyclodextrin polymer and indocyanine green for enhanced tumor-targeted cell imaging in 2D culture and 3D tumor spheroids.

Indocyanine green (ICG) is an FDA-approved medical diagnostic agent that is widely used as a near-infrared (NIR) fluorescent imaging molecular probe. However, ICG tends to aggregate to form dimers or H-aggregates in water and lacks physical and optical stability, which greatly decreases its absorbance and fluorescence intensity in various applications. Additionally, ICG has no tissue- or tumor-targeting properties, and its structure is not easy to modify, which has further limited its application in cancer diagnosis. In this study, we addressed these challenges by developing a supramolecular colloidal carrier system that targets tumor cells. To this end, we synthesized a water-soluble ß-cyclodextrin (ß-CD) polymer conjugated with folate (FA), denoted PCD-FA, which is capable of forming inclusion complexes with ICG in water through host-guest interactions between the ß-CD moieties and ICG molecules. The inclusion complexes formed by PCD-FA and ICG, called ICG@PCD-FA, dispersed stably in solution as colloidal nanoparticles, greatly improving the physical and optical properties of ICG by preventing ICG dimer formation, where ICG appeared as monomers and even J-aggregates. This resulted in stronger and more stable absorption at a longer wavelength of 900 nm, which may allow for deeper tissue penetration and imaging with reduced interference from biological tissues' autofluorescence. Moreover, ICG@PCD-FA showed a targeting effect on folate receptor-positive (FR+) tumor cells, which specifically highlighted FR+ cells via NIR endoscopic imaging. Notably, ICG@PCD-FA further improved permeation and accumulation in FR+ 3D tumor spheroids. Therefore, this ICG@PCD-FA supramolecular colloidal system may have a great potential for use in tumor NIR imaging and diagnostic applications.

Enhanced Fe(OH)2-driven reductive Dechlorination via shortened Fe-O bonds and colloidal medium.

Fe2+ is usually adsorbed to the surface of iron-bearing clay, and iron (hydr)oxide in groundwater. However, the reductive activity of Fe(OH)2, a prevalent intermediate during the transformation of Fe2+, remains unclear. In this study, high-purity Fe(OH)2 was synthesized and tested for its activity in the degradation of carbon tetrachloride (CT). XRD data confirm that the synthesized material is a pure Fe(OH)2 crystal, exhibiting sharp peaks of (001) and (100) facets. Zeta potential analysis confirms that the off-white Fe(OH)2 is a colloidal suspension with a positive charge of ∼+35-50 mV. FTIR spectra reveal the formation of a coordination compound Fe2+ with OH-/OD-, derived from NaOH/OD. SEM and HRTEM results demonstrate that the Fe(OH)2 crystal has a regular octahedral structure with a size of ∼30-70 nm and average lattice spacings of 2.58 Å. Mössbauer spectrum verifies that the Fe2+ in Fe(OH)2/Fe(OD)2 is hexacoordinated with six Fe-O bonds. XAFS data demonstrate that the Fe-O bonds become shorter as the OH-:Fe(II) ratios increase. DFT results indicate that the (100) crystal face of Fe(OH)2 more readily transfers electrons to CT. In addition to being adsorbed to iron compounds, structural Fe2+ compounds such as Fe(OH)2 could also accelerate the electron transfer from Fe2+ to CT through shortened Fe-O bonds. The rate constant of CT reduction by Fe(OH)2 is as high as 0.794 min-1 when the OH-:Fe(II) ratio is 2.5 in water. This study aims to enhance our understanding of the structure-reactivity relationship of Fe2+ compounds in groundwater, particularly in relation to electron transfer mechanisms.

Organic-mineral colloids regulate the migration and fractionation of rare earth elements in groundwater systems impacted by ion-adsorption deposits mining in South China.

Ion-adsorption rare earth element (REE) deposits distributed in the subtropics provide a rich global source of REEs, but in situ injection of REEs extractant into the mine can result in leachate being leaked into the surrounding groundwater systems. Due to the lack of understanding of REE speciation distribution, particularly colloidal characteristics in a mining area, the risks of REEs migration caused by in situ leaching of ion-adsorption REE deposits has not been concerned. Here, ultrafiltration and asymmetric flow field-flow fractionation coupled with inductively coupled plasma mass spectrometry (AF4-ICP-MS) were integrated to characterize the size and composition of REEs in leachate and groundwater from mining catchments in South China. Results show that REEs were associated with four fractions: 1) the <1 kDa fraction including dissolved REEs; 2) the 1 - 100 kDa nano-colloidal fraction containing organic compounds; 3) the 100 kDa - 220 nm fine colloids including organic-mineral (Fe, Mn and Al (oxy)hydroxides and clay minerals); 4) the >220 nm coarse colloids and acid soluble particles (ASPs) comprising minerals. Influenced by the ion exchange effect of in situ leaching, REEs in leachate were mostly dissolved (79 %). The pH of the groundwater far from the mine site was increased (5.8 - 7.3), the fine organic-mineral colloids (46 % - 80 %) were the main vectors of transport for REEs. Further analysis by AF4 revealed that the fine colloids can be divided into mineral-rich (F1, 100 kDa - 120 nm) and organic matter-rich (F2, 120 - 220 nm) populations. The main colloids associated with REEs shifted from F1 (64 % ∼ 76 %) to F2 (50 % ∼ 52 %) away from the mining area. For F1 and F2, the metal/C molar ratio decreased away from the mining area and middle to heavy REE enrichment was presented. According to the REE fractionation, organic matter was the predominant component capable of binding REEs in fine colloids. Overall, our results indicate that REEs in the groundwater system shifted from the dissolved to the colloidal phase in a catchment affected by in situ leaching, and organic-mineral colloids play an important role in facilitating the migration of REEs.

Combining Scattering Experiments and Colloid Theory to Characterize Charge Effects in Concentrated Antibody Solutions.

Charges and their contribution to protein-protein interactions are essential for the key structural and dynamic properties of monoclonal antibody (mAb) solutions. In fact, they influence the apparent molecular weight, the static structure factor, the collective diffusion coefficient, or the relative viscosity, and their concentration dependence. Further, charges play an important role in the colloidal stability of mAbs. There exist standard experimental tools to characterize mAb net charges, such as the measurement of the electrophoretic mobility, the second virial coefficient, or the diffusion interaction parameter. However, the resulting values are difficult to directly relate to the actual overall net charge of the antibody and to theoretical predictions based on its known molecular structure. Here, we report the results of a systematic investigation of the solution properties of a charged IgG1 mAb as a function of concentration and ionic strength using a combination of electrophoretic measurements, static and dynamic light scattering, small-angle X-ray scattering, and tracer particle-based microrheology. We analyze and interpret the experimental results using established colloid theory and coarse-grained computer simulations. We discuss the potential and limits of colloidal models for the description of the interaction effects of charged mAbs, in particular pointing out the importance of incorporating shape and charge anisotropy when attempting to predict structural and dynamic solution properties at high concentrations.

Cu fate driven by colloidal polystyrene microplastics with pipe scale destabilization in drinking water distribution systems.

Microplastics (MPs) and Cu have been detected in drinking water distribution systems (DWDSs). Investigating MP effects on Cu adsorption by pipe scales and concomitant variations of pipe scales was critical for improving the water quality, which remained unclear to date. Therefore, polystyrene microplastics (PSMPs) were adopted for the model MPs to determine their effects on Cu fate and pipe scale stabilization, containing batch adsorption, metal speciation extraction, and Cu release experiments. Findings demonstrated that complexation and electrostatic interactions were involved in Cu adsorption on pipe scales. PSMPs contributed to Cu adsorption via increasing negative charges of pipe scales and providing additional adsorption sites for Cu, which included the carrying and component effects of free and adsorbed PSMPs, respectively. The decreased iron and manganese oxides fraction (45.57 % to 29.91 %) and increased organic fraction (48.51 % to 63.58 %) of Cu in pipe scales when PSMPs were coexisting illustrated that PSMPs had a greater affinity for Cu than pipe scales and thus influenced its mobility. Additionally, the release of Cu could be facilitated by the coexisted PSMPs, with the destabilization of pipe scales. This study was the first to exhibit that Cu fate and pipe scale stabilization were impacted by MPs, providing new insight into MP hazards in DWDSs.

Application of gums as techno-functional hydrocolloids in meat processing and preservation: A review.

The global consumption of meat products is on the rise, leading to concerns about sustainability, fat content, and shelf life. Synthetic additives and preservatives used to extend the shelf life of meat often have negative health and environmental implications. Natural polysaccharides such as seed gums possess unique techno-functional properties, including water holding capacity, emulsifying, and film forming, offering potential alternatives in meat processing and preservation. This study explores the use of gums in meat and meat product processing and preservation. The water holding and emulsifying properties of gums can potentially bind fat and reduce overall lipid content, while their antimicrobial and film-forming properties can inhibit the microbial growth and reduce oxidation, thereby extending the shelf life. Incorporating gums as a fat replacer and edible coating shows promise for reducing fat content and extending the shelf life of meat and meat products.

Co-transport behavior of Am(III) and natural colloids in the vadose zone sediments.

Americium (III) (Am(III)) in the natural environment is considered immobile due to its low solubility, strong adsorption, and high affinity to solid surfaces. However, the presence of natural colloids may carry Am(III) transport for long distance. The individual and co-transport behaviors of Am(III) and natural colloids through the unsaturated packed columns were investigated under the influence of pH, electrolyte concentration, velocity, Am(III) concentration and natural colloids concentration. Under all experimental conditions, Am(III) individual transport construct sight breakthrough curves (BTCs, CAm/C0 < 3%), but the presence of natural colloids increased the BTCs plateau of Am(III) significantly (30% < CAm/C0 < 80%), indicating that the colloids were able to promote Am(III) transport in the unsaturated porous media. DLVO theoretical calculations reveal that the increased pH and decreased electrolyte concentration lead to a rase in electrostatic repulsion, and the natural colloids tend to be dispersed and stabilized, which facilitates elution. In addition to this, the increase of velocity and colloids concentration will lead to greater breakthrough of natural colloids. The non-equilibrium two-site model and the two-site kinetic retention model well-described the BTCs of Am(III) and natural colloids, respectively. This study provide new insights into the behavior of natural colloids carrying the Am(III) into aquifers through the vadose zone sediments.

Microbially Induced Soil Colloidal Phosphorus Mobilization Under Anoxic Conditions.

Understanding the behavior of colloidal phosphorus (Pcoll) under anoxic conditions is pivotal for addressing soil phosphorus (P) mobilization and transport and its impact on nutrient cycling. Our study investigated Pcoll dynamics in acidic floodplain soil during a 30-day flooding event. The sudden oxic-to-anoxic shift led to a significant rise in pore-water Pcoll levels, which exceeded soluble P levels by more than 2.7-fold. Colloidal fractions transitioned from dispersed forms (<220 nm) to colloid-associated microaggregates (>220 nm), as confirmed by electron microscopy. The observed increase in colloidal sizes was paralleled by their heightened ability to form aggregates. Compared to sterile control conditions, anoxia prompted the transformation of initially dispersed colloids into larger particles through microbial activity. Curiously, the 16S rRNA and ITS microbial diversity analysis indicated that fungi were more strongly associated with anoxia-induced colloidal release than bacteria. These microbially induced shifts in Pcoll lead to its higher mobility and transport, with direct implications for P release from soil into floodwaters.

Bioinspired zwitterionic triblock copolymers designed for colloidal drug delivery: 2 - Biological evaluation.

In this work, poly(lactide) nanoparticles were equipped with a bioinspired coating layer based on poly[2-(methacryloyloxy)ethyl phosphorylcholine] and then evaluated when administered to the lungs and after intravenous injection. Compared to the plain counterparts, the chosen zwitterionic polymer shell prevented the coated colloidal formulation from aggregation and conditioned it for lower cytotoxicity, protein adsorption, complement activation and phagocytic cell uptake. Consequently, no interference with the biophysical function of the lung surfactant system could be detected accompanied by negligible protein and cell influx into the bronchoalveolar space after intratracheal administration. When injected into the central compartment, the coated formulation showed a prolonged circulation half-life and a delayed biodistribution to the liver. Taken together, colloidal drug delivery vehicles would clearly benefit from the investigated poly[2-(methacryloyloxy)ethyl phosphorylcholine]-based polymer coatings.

Synthesis and characterization of antimicrobial colloidal polyanilines.

The potential application of colloidal polyaniline (PANI) as an antimicrobial is limited by challenges related to solubility in common organic solvents, scalability, and antimicrobial potency. To address these limitations, we introduced a functionalized PANI (fPANI) with carboxyl groups through the polymerisation of aniline and 3-aminobenzoic acid in a 1:1 molar ratio. fPANI is more soluble than PANI which was determined using a qualitative study. We further enhanced the solubility and antimicrobial activity of fPANI by incorporating Ag nanoparticles onto the synthesized fPANI colloid via direct addition of 10 mM AgNO3. The improved solubility can be attributed to an approximately 3-fold reduction in size of particles. Mean particle sizes are measured at 1322 nm for fPANI colloid and 473 nm for fPANI-Ag colloid, showing a high dispersion and deagglomeration effect from Ag nanoparticles. Antimicrobial tests demonstrated that fPANI-Ag colloids exhibited superior potency against Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and Bacteriophage PhiX 174 when compared to fPANI alone. The minimum bactericidal concentration (MBC) and minimum virucidal concentration (MVC) values were halved for fPANI-Ag compared to fPANI colloid and attributed to the combination of Ag nanoparticles with the fPANI polymer. The antimicrobial fPANI-Ag colloid presented in this study shows promising results, and further exploration into scale-up can be pursued for potential biomedical applications.

Biomarker-Driven DNA-Functionalized Colloidal Programmed Simultaneous Assembly and Disassembly in Cells.

Complex structures and devices, both natural and artificial, can often undergo assembly and disassembly. Assembly and disassembly allow multiple stimuli to initiate, for example, the assembly and disassembly of primary cilia under the control of E3 ubiquitin ligases and deubiquitinases. Although biology relies on such schemes, they are rarely available in materials science. Here, we demonstrate a DNA-functionalized colloidal Au response to endogenous biomarkers to trigger simultaneous assembly and disassembly techniques. Colloidal Au is initially inert because the starting DNA strands are paired and prehybridized. TK1 mRNA competes to bind one of the paired strands and release its complement. The released complement binds to the next colloidal Au to initiate assembly, and APE1 can shear the colloidal Au assembly binding site to initiate disassembly. Our strategy provides temporal and spatial logic control during colloidal Au assembly and disassembly, and this simultaneous assembly and disassembly process can be used for sequential detection and cellular imaging of two biomarkers, effectively reducing signal false-positive results and shortening detection time. This work highlights biomarker-controlled colloidal Au simultaneous assembly and disassembly in ways that are simple and versatile, with the potential to enrich the application scope of DNA nanotechnology and provide an idea for the application of precision medicine testing.

In situ enzymatic control of colloidal phoresis and catalysis through hydrolysis of ATP.

The ability to sense chemical gradients and respond with directional motility and chemical activity is a defining feature of complex living systems. There is a strong interest among scientists to design synthetic systems that emulate these properties. Here, we realize and control such behaviors in a synthetic system by tailoring multivalent interactions of adenosine nucleotides with catalytic microbeads. We first show that multivalent interactions of the bead with gradients of adenosine mono-, di- and trinucleotides (AM/D/TP) control both the phoretic motion and a proton-transfer catalytic reaction, and find that both effects are diminished greatly with increasing valence of phosphates. We exploit this behavior by using enzymatic hydrolysis of ATP to AMP, which downregulates multivalent interactivity in situ. This produces a sudden increase in transport of the catalytic microbeads (a phoretic jump), which is accompanied by increased catalytic activity. Finally, we show how this enzymatic activity can be systematically tuned, leading to simultaneous in situ spatial and temporal control of the location of the microbeads, as well as the products of the reaction that they catalyze. These findings open up new avenues for utilizing multivalent interaction-mediated programming of complex chemo-mechanical behaviors into active systems.