Synthesis of cyclodextrin-based polyrotaxanes and polycatenanes for supramolecular pharmaceutical sciences.

Cyclodextrins (CDs) are essential in the pharmaceutical industry and have long been used as food and pharmaceutical additives. CD-based interlocked molecules, such as rotaxanes, polyrotaxanes, catenanes, and polycatenanes, have been synthesized and have attracted considerable attention in supramolecular chemistry. Among them, CD polyrotaxanes have been employed as slide-ring materials and biomaterials. CD polycatenanes are new materials; therefore, to date, no examples of applied research on CD polycatenanes have been reported. Consequently, we expect that applied research on CD polycatenanes will accelerate in the future. This review article summarizes the syntheses and structural analyses of CD polyrotaxanes and polycatenanes to facilitate their applications in the pharmaceutical industry. We believe that this review will promote further research on CD-based interlocked molecules.

Production of Large-Ring Cyclodextrins by Amylomaltases.

Amylomaltase is a well-known glucan transferase that can produce large ring cyclodextrins (LR-CDs) or so-called cycloamyloses via cyclization reaction. Amylomaltases have been found in several microorganisms and their optimum temperatures are generally around 60-70 °C for thermostable amylomaltases and 30-45 °C for the enzymes from mesophilic bacteria and plants. The optimum pHs for mesophilic amylomaltases are around pH 6.0-7.0, while the thermostable amylomaltases are generally active at more acidic conditions. Size of LR-CDs depends on the source of amylomaltases and the reaction conditions including pH, temperature, incubation time, and substrate. For example, in the case of amylomaltase from Corynebacterium glutamicum, LR-CD productions at alkaline pH or at a long incubation time favored products with a low degree of polymerization. In this review, we explore the synthesis of LR-CDs by amylomaltases, structural information of amylomaltases, as well as current applications of LR-CDs and amylomaltases.

Readily accessible azido-alkyne-functionalized monomers for the synthesis of cyclodextrin analogues using click chemistry.

A set of linear and cyclic oligomers were synthesized starting from a suitable azido-alkyne monomer through click oligomerization. The synthesis of these monomers starting from bromobenzene features an enzymatic dihydroxylation and the regio- and stereoselective installation of the azide and alkyne functionalities. Optimization of the click reaction was accomplished using dimerization as the model reaction. The product distribution of the oligomerization could be modulated by the monomer concentration and the use of additives, generating mainly cyclic oligomers consisting of tetramers, pentamers and hexamers.

Polypseudorotaxanes constructed from pillar[5]arenes and polyamides by interfacial polymerization.

Polypseudorotaxanes constructed from pillar[5]arene rings and polyamide chains were successfully synthesized by interfacial polymerization between diamines and dicarbonyl chlorides in the presence of pillar[5]arene. The dicarbonyl chloride length and the assocation constants of dicarbonyl chloride-pillar[5]arene complexes were important factors in producing polypseudorotaxanes with high cover ratio of pillar[5]arene rings.

A lingering mouthwash with sustained antibiotic release and biofilm eradication for periodontitis.

Dental plaque biofilms are believed to be one of the principal virulence factors in periodontitis resulting in tooth loss. Traditional mouthwashes are limited due to the continuous flow of saliva and poor drug penetration ability in the biofilm. Herein, we fabricated an antibiotic delivery platform based on natural polysaccharides (chitosan and cyclodextrin) as a novel mouthwash for the topical cavity delivery of minocycline. The penetration and residence mechanisms demonstrate that the platform can prolong the residence time up to 12 h on biofilms. Furthermore, sustained release can enhance the penetration of drugs into biofilms. In vitro antibiofilm experimental results indicated that the mouthwash effectively kills bacteria and eradicate biofilms. Effective treatment in vivo was confirmed by the significantly reduced dental plaque and alleviated inflammation observed in a rat periodontitis model. In summary, this novel platform can improve antibiofilm efficiency and prevent drugs from being washed away by saliva, which may provide benefits for many oral infectious diseases.

Polyethylenimine-Bisphosphonate-Cyclodextrin Ternary Conjugates: Supramolecular Systems for the Delivery of Antineoplastic Drugs.

Bisphosphonates (BPs) are bone-binding molecules that provide targeting capabilities to bone cancer cells when conjugated with drug-carrying polymers. This work reports the design, synthesis, and biological evaluation of polyethyleneimine-BP-cyclodextrin (PEI-BP-CD) ternary conjugates with supramolecular capabilities for the loading of antineoplastic drugs. A straightforward, modular, and versatile strategy based on the click aza-Michael addition reaction of vinyl sulfones (VSs) allows the grafting of BPs targeting ligands and ßCD carrier appendages to the PEI polymeric scaffold. The in vitro evaluation (cytotoxicity, cellular uptake, internalization routes, and subcellular distribution) for the ternary conjugates and their doxorubicin inclusion complexes in different bone-related cancer cell lines (MC3T3-E1 osteoblasts, MG-63 sarcoma cells, and MDA-MB-231 breast cancer cells) confirmed specificity, mitochondrial targeting, and overall capability to mediate a targeted drug transport to those cells. The in vivo evaluation using xenografts of MG-63 and MDA-MB-231 cells on mice also confirmed the targeting of the conjugates.

Development of Spray-Dried Cyclodextrin-Based Pediatric Anti-HIV Formulations.

The human immunodeficiency virus (HIV) impacts up to 37 million people globally, of which 1.8 million are children. To date, there is no cure for HIV, although treatment options such as antiretroviral therapy (ART) are available. ART, which involves a patient taking a combination of antiretrovirals, is being used to treat HIV clinically. Despite the effectiveness of ART, there is currently no palatable pediatric formulation to treat HIV in children, which has hindered patient compliance and overall treatment efficacy. In addition, anti-HIV therapeutics are often poorly water-soluble, and hence have poor bioavailability. In the present study, we developed a pediatric-friendly formulation for anti-HIV therapeutics with improved dissolution characteristics of the therapeutic agents. Lopinavir (LPV) and ritonavir (RTV), available as FDA-approved fixed-dose combination products, were chosen as model ART drugs, and the formulation and processing parameters of spray-dried cyclodextrin (CD)-based LPV and RTV complexes were studied. Results showed that the spray-dried complexes exhibited enhanced dissolution profiles in comparison to pure drugs, particularly spray-dried ß-CD complexes, which showed the most favorable dissolution profiles. This current formulation with enhanced dissolution and taste-masking ability through the use of cyclodextrin has the potential to address the unmet need for the development of suitable pediatric formulations.

Selective Photodimerization in a Cyclodextrin Metal-Organic Framework.

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K+ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC- and four K+ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

Controlled release of iodine from cross-linked cyclodextrin metal-organic frameworks for prolonged periodontal pocket therapy.

Effective therapeutic system to periodontitis was designed using cross-linked cyclodextrin metal-organic framework (COF) as carrier for iodine and further suspended in hydroxyethyl cellulose gel as I2@COF-HEC hydrogel. Inclusion of iodine within the COF was demonstrated by SR-FTIR spectral and characteristic DSC and TGA changes. Molecular modelling identified the interaction of iodine with both COF central cavity and individual cyclodextrin moieties of COF. In vitro results of study demonstrated that iodine release in artificial saliva from I2@COF-HEC hydrogel could be extended up to 5 days, which was slower than I2@COF particles. Using an in vivo rat model of periodontitis, micro-computed tomography of alveolar bone morphology demonstrated that I2@COF-HEC hydrogel showed similar effects in decreasing periodontal pocket depth and alveolar bone resorption to minocycline ointment, a periodontitis antibiotic. The I2@COF-HEC hydrogel is a novel local delivery device of iodine as a broad spectrum antimicrobial use for treatment of periodontitis.

Polypseudorotaxane and polydopamine linkage-based hyaluronic acid hydrogel network with a single syringe injection for sustained drug delivery.

Polypseudorotaxane structure and polydopamine bond-based crosslinked hyaluronic acid (HA) hydrogels including donepezil-loaded microspheres were developed for subcutaneous injection. Both dopamine and polyethylene glycol (PEG) were covalently bonded to the HA polymer for catechol polymerization and inclusion complexation with alpha-cyclodextrin (α-CD), respectively. A PEG chain of HA-dopamine-PEG (HD-PEG) conjugate was threaded with α-CD to make a polypseudorotaxane structure and its pH was adjusted to 8.5 for dopamine polymerization. Poly(lactic-co-glycolic acid) (PLGA)/donepezil microsphere (PDM) was embedded into the HD-PEG network for its sustained release. The HD-PEG/α-CD/PDM 8.5 hydrogel system exhibited an immediate gelation pattern, injectability through single syringe, self-healing ability, and shear-thinning behavior. Donepezil was released from the HD-PEG/α-CD/PDM 8.5 hydrogel in a sustained pattern. Following subcutaneous injection, the weight of excised HD-PEG/α-CD/PDM 8.5 hydrogel was higher than the other groups on day 14. These findings support the clinical feasibility of the HD-PEG/α-CD/PDM 8.5 hydrogel for subcutaneous injection.

Cyclodextrins, Natural Compounds, and Plant Bioactives-A Nutritional Perspective.

Cyclodextrins (CDs) are a group of cyclic oligosaccharides produced from starch or starch derivatives. They contain six (αCD), seven (ßCD), eight (γCD), or more glucopyranose monomers linked via α-1,4-glycosidic bonds. CDs have a truncated cone shape with a hydrophilic outer wall and a less hydrophilic inner wall, the latter forming a more apolar internal cavity. Because of this special architecture, CDs are soluble in water and can simultaneously host lipophilic guest molecules. The major advantage of inclusion into CDs is increased aqueous solubility of such lipophilic substances. Accordingly, we present studies where the complexation of natural compounds such as propolis and dietary plant bioactives (e.g., tocotrienol, pentacyclic triterpenoids, curcumin) with γCD resulted in improved stability, bioavailability, and bioactivity in various laboratory model organisms and in humans. We also address safety aspects that may arise from increased bioavailability of plant extracts or natural compounds owing to CD complexation. When orally administered, α- and ßCD-which are inert to intestinal digestion-are fermented by the human intestinal flora, while γCD is almost completely degraded to glucose units by α-amylase. Hence, recent reports indicate that empty γCD supplementation exhibits metabolic activity on its own, which may provide opportunities for new applications.

Research Progress on Synthesis and Application of Cyclodextrin Polymers.

Cyclodextrins (CDs) are a series of cyclic oligosaccharides formed by amylose under the action of CD glucosyltransferase that is produced by Bacillus. After being modified by polymerization, substitution and grafting, high molecular weight cyclodextrin polymers (pCDs) containing multiple CD units can be obtained. pCDs retain the internal hydrophobic-external hydrophilic cavity structure characteristic of CDs, while also possessing the stability of polymer. They are a class of functional polymer materials with strong development potential and have been applied in many fields. This review introduces the research progress of pCDs, including the synthesis of pCDs and their applications in analytical separation science, materials science, and biomedicine.

Facile synthesis of per(6-O-tert-butyldimethylsilyl)-α-, ß-, and γ-cyclodextrin as protected intermediates for the functionalization of the secondary face of the macrocycles.

Per(6-O-tert-butyldimethylsilyl)-α-, ß- and γ-cyclodextrin derivatives are well-known as synthetic intermediates that enable the selective mono-, partial, or perfunctionalization of the secondary face of the macrocycles. Although silylation of the primary rim is readily achieved by treatment with tert-butyldimethylsilyl chloride in the presence of pyridine (either alone or mixed with a co-solvent), the reaction typically results in a mixture containing both under- and oversilylated byproducts that are difficult to remove. To address this challenge in preparing a pure product in high yield, we describe an approach that centers on the addition of a controlled excess of silylating agent to avoid the presence of undersilylated species, followed by the removal of oversilylated species by column chromatography elution with carefully designed solvent mixtures. This methodology works well for 6-, 7-, and 8-member rings (α-, ß-, and γ-cyclodextrins, respectively) and has enabled us to repeatedly prepare up to ⁓35 g of ≥98% pure product (as determined by HPLC) in 3 d. We also provide procedures for lower-scale reactions, as well as an example of how the ß-cyclodextrin derivative can be used for functionalization of the secondary face of the molecule.

Negatively charged cyclodextrins: Synthesis and applications in chiral analysis-A review.

The negatively charged cyclodextrins (CDs) play an important role in chiral analysis due to the additional electrostatic effect beyond the host-guest inclusion, especially in enantioanalysis of positively charged and electrically neutral analytes. This review presents recent advances in application of anionic CDs for enantioanalysis during the past five years. Firstly, the synthesis approaches of random substitution and single isomers of anionic CDs are briefly discussed. The main part focuses on the chiral analysis using anionic CDs in various analytical techniques, including capillary electrophoresis, high-performance liquid chromatography, capillary electrochromatography, counter current chromatography, nuclear magnetic resonance, etc. Particular attention is given to the capillary electrophoresis application since charged CDs could be used as a carrier of enantiomers by virtue of their self-mobility and offer an easy adjustment of the enantiomer migration order. Finally, future opportunities are also discussed in the conclusion of this review.

Erlotinib entrapped in cholesterol-depleting cyclodextrin nanoparticles shows improved antitumoral efficacy in 3D spheroid tumors of the lung and the liver.

Erlotinib (ERL), a tyrosine kinase inhibitor approved for therapeutic use in non-small cell lung cancer is further researched for eventual liver cancer treatment. However, conventional ERL has important bioavailability problems resulting from oral administration, poor solubility and gastrointestinal degradation into inactive metabolites. Alternative administration routes and nanoparticulate drug delivery systems are studied to prevent or reduce these drawbacks. In this study, ERL-loaded CD nanosphere and nanocapsule formulations capable of cholesterol depletion in resistant cancer cells were evaluated for ERL delivery. Drug loading and release profile depended largely on the surface charge of nanoparticles. Antiproliferative activity data obtained from 2D and 3D cell culture models demonstrated that polycationic ßCD nanocapsules were the most effective formulation for ERL delivery to lung and liver cancer cells. 3D tumour tumoral penetration studies further revealed that nanocapsule formulations penetrated deeper into the tumour through the multilayered cells. Furthermore, all formulations were able to extract membrane cholesterol from lung and liver cancer cell lines, indicating the induction of apoptosis and overcoming drug resistance. In conclusion, given their tumoral penetration and cell membrane cholesterol depletion abilities, amphiphilic CD nanocapsules emerge as promising alternatives to improve the safety and efficiency of ERL treatment of both liver and lung tumours.

Enantioselective Fluorescent Recognition of Free Amino Acids: Challenges and Opportunities.

Fluorescent probes that can discriminate enantiomers of amino acids in organic media or aqueous solution are discussed. This Minireview focuses on recent progress in the studies of three classes of probes including those made of cyclodextrins, 1,1'-binaphthyl compounds, and nanomaterials, and uses them to illustrate the design strategies, applications, and limitations in this area. These probes are potentially useful for rapid analysis of asymmetric reactions for amino acid synthesis as well as the real-time imaging of amino acids in biological systems. The challenges in these applications are analyzed. Working in this field of enantioselective fluorescent recognition of amino acids offers great opportunities to make new scientific discoveries and to develop important practical applications.

ß-Cyclodextrin Polymerized in Cross-Flowing Channels of Biomass Sawdust for Rapid and Highly Efficient Pharmaceutical Pollutants Removal from Water.

Water pollution arising from pharmaceuticals has raised great concerns about the potential risks for biosphere and human health. However, rapid and efficient removal of pharmaceutical contaminants from water remains challenging. Wood sawdust, a byproduct of the wood-processing industry, is an abundant, cost-effective, and sustainable material with a unique hierarchically porous microstructure. These features make wood sawdust quite interesting as a filtration material. Here, we report a novel cross-flow filtration composite based on ß-cyclodextrin-polymer-functionalized wood sawdust (ß-CD/WS) in which the pharmaceutical contaminant water flows through the sawn-off vessel channels and the micropores on the surface of the cell walls, generating the turbulence. Such water flow characteristics ensure full contact between pharmaceutical pollutants and ß-CD grafted on the cellulose backbone of wood sawdust, thereby enhancing the water treatment efficiency. Consequently, the ß-CD/WS filter device shows a high removal efficiency of over 97.5% within 90 s for various pharmaceutical contaminants including propranolol, amitriptyline, chlortetracycline, diclofenac, and levofloxacin, and a high saturation uptake capacity of 170, 156, 257, 159, and 185 mg g-1, respectively. The high-performance wood-sawdust-based cross-flow filtration opens new avenues for solving the global water pollution issues, especially those caused by pharmaceutical contaminants.

Preparation and characterization of cyclodextrin nanosponges for organic toxic molecule removal.

Cyclodextrin-based nanosponges (CD-NS) are considered as safe and biocompatible systems for removing toxic molecules from the body. Rapid removal of toxic molecules that are formed in the body from certain food constituents, is relevant especially for patients affected by chronic kidney disease. Within the scope of this study, innovative cyclodextrin polymers were synthesized to form nanosponges able to remove indole, before it could form the toxic indoxyl sulfate in the body. Furthermore, in vivo studies were carried out using the two optimal CD-NS formulations by assessing physicochemical properties, stability, indole adsorption capacity and in vitro cytotoxicity. NS prepared from ß-cyclodextrin cross-linked with toluene diisocyanate was found to be the most effective NS with an in vitro indole adsorption capacity of over 90%. In addition, this derivative was more stable in gastrointestinal media. Animal studies further revealed that oral CD-NSs did not tend to accumulate and damage gastrointestinal tissues and are excreted from the GI tract with minimal absorption. In conclusion, this study suggests that CD-NS formulations are effective and safe in removing toxic molecules from the body. Their potential use in veterinary or human medicine could reduce dialysis frequency and avoid hepatic and cardiac toxicity avoiding the indole formation.

Mechanochemical activation with cyclodextrins followed by compaction as an effective approach to improving dissolution of rutin.

Rutin is one of the most important flavonoids with poor bioavailability. This work aimed at addressing the issue of poor biopharmaceutical performance of rutin by applying a combination of complexation with secondary processing into tablets. Mechanical activation was the most suitable method of rutin complex formation with (2-hydroxypropyl)-ß-cyclodextrin (HP-ß-CD), while the ß-cyclodextrin (ß-CD) complex successfully formed by kneading with an ethanol/water mixture. Complexation was confirmed by thermal analysis, powder X-ray diffraction and vibrational spectroscopy. Dynamic vapour sorption showed that stability of powders at high humidity conditions was satisfactory, however, the ß-CD complex retained around 8% of moisture. The complexes were compacted with or without tricalcium phosphate (TRI-CAFOS) filler at a range of compression pressures (19-113 MPa). The best tabletability was determined for rutin/HP-ß-CD, compressibility for the TRI-CAFOS blends with complexes and compactibility for the rutin/HP-ß-CD + TRI-CAFOS mix. Dissolution studies showed quicker and more complete dissolution (pH 1.2) of rutin/HP-ß-CD tablets, however the compacts comprising the filler were superior than pure complexes. The tablets manufactured in this study appear to be promising delivery systems of rutin and it is recommended to combine rutin/HP-ß-CD with TRI-CAFOS and compact at 38-76 MPa.

Cyclodextrin-modified poly(octamethylene citrate) polymers towards enhanced sorption properties.

Herein, we describe the synthesis of poly(1,8-octamethylene citrate) materials modified in the bulk with 2-hydroxypropyl-ß-cyclodextrin (cPOCCD), biodegradable elastomers with intrinsic sorption properties for drug delivery. The chemical structure, physicochemical properties, in vitro drug loading and release profiles of cPOCCD were investigated. Thus, cPOCCD polyesters absorb the studied drugs more effective and release them for a longer period of time than poly(1,8-octamethylene citrate) materials not containing cyclodextrins.