In-Vitro Measurement of Forces During Debridement with a Piezoelectric Ultrasonic Periodontal Scaler.

PURPOSE: This study investigated the magnitude, direction, and temporal aspects of the force applied during instrumentation with a piezoelectric ultrasonic periodontal scaler, compared this force with recommendations in the literature, and assessed the influence of the profession (dentist or dental hygienist) and calculus hardness. MATERIALS AND METHODS: The force applied by ten dental hygienists and six dentists during debridement of comparatively soft and hard artificial dental calculus with a piezoelectric ultrasonic scaler was recorded in-vitro. The total force and its components in three axes were statistically analysed. RESULTS: During debridement of soft artificial dental calculus, the mean total force applied by dental hygienists was 0.34 N (± 0.18 N, range: 0.13 N to 0.59 N) and by dentists 0.28 N (± 0.33 N, range: 0.06 N to 0.95 N), and the total force exceeded 0.5 N approximately 23% and 14% of the time for dental hygienists and dentists, respectively. During debridement of hard artificial dental calculus, the mean total force applied by dental hygienists was 0.63 N (± 0.40 N, range: 0.28 N to 1.64 N) and by dentists 0.57 N (± 0.17 N, range: 0.34 N to 0.76 N); the total force exceeded 0.5 N more than half of the time for both professions. On average, dental hygienists applied 1.85x (p = 0.04) and dentists 2.04x (p = 0.06) higher force on hard than on soft artificial calculus. However, dental hygienists and dentists used similar forces during the debridement of both hard (p = 1.00) and soft (p = 0.26) calculus. CONCLUSION: The force applied during the debridement of hard artificial dental calculus was statistically significantly higher than during the debridement of soft artificial dental calculus. No statistically significant difference between dentists and dental hygienists was found. The force applied by both groups on soft and hard artificial dental calculus frequently exceeded recommended values.

In-vitro effects of novel periodontal scalers with a planar ultrasonic piezoelectric transducer on periodontal biofilm removal, dentine surface roughness, and periodontal ligament fibroblasts adhesion.

OBJECTIVES: To compare ultrasonic scaler prototypes based on a planar piezoelectric transducer with different working frequencies featuring a titanium (Ti-20, Ti-28, and Ti-40) or stainless steel (SS-28) instrument, with a commercially available scaler (com-29) in terms of biofilm removal and reformation, dentine surface roughness and adhesion of periodontal fibroblasts. MATERIALS AND METHODS: A periodontal multi-species biofilm was formed on specimens with dentine slices. Thereafter specimens were instrumented with scalers in a periodontal pocket model or left untreated (control). The remaining biofilms were quantified and allowed to reform on instrumented dentine slices. In addition, fibroblasts were seeded for attachment evaluation after 72 h of incubation. Dentine surface roughness was analyzed before and after instrumentation. RESULTS: All tested instruments reduced the colony-forming unit (cfu) counts by about 3 to 4 log10 and the biofilm quantity (each p < 0.01 vs. control), but with no statistically significant difference between the instrumented groups. After 24-hour biofilm reformation, no differences in cfu counts were observed between any groups, but the biofilm quantity was about 50% in all instrumented groups compared to the control. The attachment of fibroblasts on instrumented dentine was significantly higher than on untreated dentine (p < 0.05), with the exception of Ti-20. The dentine surface roughness was not affected by any instrumentation. CONCLUSIONS: The planar piezoelectric scaler prototypes are able to efficiently remove biofilm without dentine surface alterations, regardless of the operating frequency or instrument material. CLINICAL RELEVANCE: Ultrasonic scalers based on a planar piezoelectric transducer might be an alternative to currently available ultrasonic scalers.

Effect of quadrantwise versus full-mouth subgingival instrumentation on clinical and microbiological parameters in periodontitis patients: A randomized clinical trial.

AIM: This study evaluated the efficacy of quadrantwise subgingival instrumentation (Q-SI) versus one-stage full-mouth subgingival instrumentation (FM-SI) on probing depth and periodontal pathogen reduction over a 6-month follow-up period, as well as whether baseline periodontal pathogens influenced the impact of periodontal treatment protocols on outcomes. METHODS: Patients with periodontitis were randomized to receive Q-SI (n = 43) or FM-SI (n = 45). Patients were instructed and motivated to maintain optimal oral hygiene during the treatment sessions. Clinical (probing pocket depth [PPD], clinical attachment loss [CAL], and bleeding on probing [BOP]) and periodontal pathogens were assessed at baseline and after 30, 90, and 180 days. Total bacterial load and periodontal pathogens were analysed via real-time PCR. RESULTS: At the 6-month follow-up, the median PPD decreased from 4.8 mm (interquartile range [IQR]: 4.3-5.2) to 2.6 mm (IQR: 2.3-2.9) in FM-SI patients and from 4.7 mm (IQR: 4.1-5.2) to 3.2 mm (IQR: 2.4-3.5) in Q-SI patients (p < .001). At 6 months, FM-SI was more effective at reducing the median proportions of Porphyromonas gingivalis (Pg), Aggregatibacter actinocomyctemcomitans, and Tannerella forsythia (Tf) (p < .001 for each value). Multilevel linear regression analysis demonstrated that high baseline PPD (p = .029), Pg (p = .014), and Tf (p < .001) levels and the FM-SI protocol (p < .001) were statistically significant predictors of PPD reduction at 6 months. Furthermore, PPD reduction was significantly greater in the FM-SI group when lower baseline Pg levels were detected. CONCLUSION: The FM-SI was more effective than the Q-SI in reducing the mean PPD and number of periodontal pathogens in periodontitis patients over a 6-month follow-up period. Higher baseline PPD and Pg levels had a negative impact on PPD reduction at 6 months after FM-SI.

Visualisation of Droplet Flow Induced by Ultrasonic Dental Cleaning.

INTRODUCTION: During dental treatment procedures ultrasonic scalers generate droplets containing microorganisms such as bacteria and viruses. Hence, it is necessary to study the dynamic properties of generated droplets in order to investigate the risks associated with the spread of infection. The aim of this study was to visualise the flow state of droplets and to evaluate the impact of droplets generated during the use of an ultrasonic scaler during an oral surgical procedure. METHODS: We studied the spatial flow of liquid droplets through a combination of imaging and numeric simulation of a simulated dental treatment processes. First, we photographed the real time images of the ultrasonic scaler and evaluated the images using image-processing software Image J to visualise the flow of liquid droplets. Finally we simulated the flow process of liquid droplets by using the initial velocity of droplet splashing and the angle of the obtained information using computerised fluid dynamics technology. RESULTS: Under different working conditions, the droplet particle splashing velocity, maximum height, and spray angle varied, but the particle trajectory was generally parabolic. The maximum droplet velocity varied between 3.56 and 8.56 m/s, and the splashing height was between 40 and 110 mm. CONCLUSIONS: During risk assessment of an ultrasonic scaler usage, difficulties arise due to the insufficient research on droplet velocity and distribution. This study aims to address this gap by visualising the flow trajectories of droplets generated by ultrasonic scalers. The obtained data will assist in developing more effective interventions based on spatial and temporal distribution of droplets. This provides a new approach for droplet particle research and offers new strategies for public health prevention and control.

The effects of scaling and root planing plus home oral hygiene maintenance in Stage I/II periodontitis population: A 24-week randomized clinical trial.

OBJECTIVES: To compare the effects of powered and manual toothbrushing following scaling and root planing on bleeding on probing and other clinical indicators of periodontitis. MATERIALS AND METHODS: This was a randomized, examiner-blind, parallel-design, 24-week clinical study. Eligible subjects were 18-75 years of age with Stage I or II periodontitis. All subjects received scaling and root planing (SRP) within 28 days of enrollment. Thereafter, subjects were randomized to twice daily at-home use of either a powered toothbrush (PTB) or a manual toothbrush (MTB). Randomization was balanced for gender and periodontitis stage. No other oral hygiene aids were permitted. Subjects were evaluated every 4 weeks for the following measures: bleeding on probing (BOP), surface plaque (MPI), probing pocket depth (PPD) and clinical attachment level until Week 24. RESULTS: Of 328 randomized subjects, 299 subjects completed the study. For BOP at Week 24, the Least Squares (LS) Mean, standard error (SE) reduction from baseline was 0.24 (0.01) for the PTB group and 0.02 (0.01) for the MTB group, resulting in a statistically significant treatment difference of 0.22 (0.01), p-value < 0.0001. There were also concomitant reductions in MPI and PPD at Week 24, resulting in statistically significant (p-value < 0.0001) LS Mean (SE) treatment differences of 0.86 (0.04) and 0.24 (0.01), for MPI and PPD, respectively. CONCLUSION: When combined with SRP, daily home oral hygiene maintenance including a powered toothbrush significantly reduced clinical symptoms of periodontitis and surface plaque levels compared to a manual toothbrush in a Stage I/II periodontitis population. (ClinicalTrials.gov Identifier: NCT04254770).

Reduction of aerosol dissemination in a dental area generated by high-speed and scaler ultrasonic devices employing the "Prime Protector".

The use of an external dome aerosol containment device (Prime Protector) is proposed to reduce the spread of particles within the dental office. Hence, the aim of our study was to compare the spread of bioaerosols generated by a High-speed Handpiece (HH) and an Ultrasonic Prophylaxis Device (UPD), with and without the Prime Protector dome (PP) by counting Colony Forming Units (CFU) of Lactobacillus casei Shirota, at different distances on the x and y axis. The PP was located considering the parallelism between the base of the dome and the frontal plane of the simulator, aligning the center of the mouth with the center of the dome. The PP dome measurements are 560.0mm x 255.0mm x 5mm. Petri dishes were placed at 0.5 m, 1 m and 1.5 m respectively. Aerosol generation in the laboratory environment was done three times with the following experimental groups 1) HH, 2) HH-PP, 3) UPD, 4) UPD-PP. Each dental device activation (HH and UPD) had a time frame of 2 minutes on the upper anterior teeth of the dental phantom with a liquid suspension containing Lactobacillus casei Shirota (YAKULT 0836A 0123; 1027F 0407). Air pressure and ventilation were parameterized. No separate high-volume evacuation used, nor was there any air removal attached to the dome. Results showed no significant difference between distance and axis in the CFU count. When means for devices and distances were compared between each of them all showed significant differences except for UPD and UPD-PP (p <0,004). In conclusion, external devices like Prime Protector could help decrease aerosol diffusion during high-speed handpiece activation. However, this dome does not replace the use of PPE inside dental clinics.

Efficacy of a chairside extraoral suction system in the reduction of aerosol contamination.

The dental setting is regarded as a high-risk environment for aerosol concentrations and transmission of respiratory infectious agents, especially in relation to the COVID-19 pandemic. Although a number of approaches and practices have evolved to reduce the spread of pathogens in the dental setting, the risk of airborne infection remains a concern. Several new extraoral suction (EOS) devices have been marketed recently; further investigation is warranted to determine their clinical effectiveness. The aim of this study was to evaluate the efficacy of a chairside EOS device (PAX 2000 Extraoral Dental Suction System) in reducing aerosol contamination from patients receiving ultrasonic scaling by a registered hygienist as a part of initial or supportive periodontal therapy. The number of colony-forming units (CFUs) was measured with agar plates before, during, and after ultrasonic scaling at 3 different locations in the dental operatory (instrument table, patient chest area, and patient foot area). Forty subjects were randomly allocated into 2 test groups (n = 20) in which ultrasonic scaling was performed with or without the use of the EOS device. The CFUs retrieved after incubation were quantified and identified by their bacterial or fungal taxon. The use of the EOS device reduced the number of CFUs during scaling at all 3 locations, but the difference was only statistically significant (P = 0.018; Mann-Whitney U test) at the patient's chest area, where the highest number of CFUs was present. The aerosols consisted of 74 different taxa of human origin. The results suggest that the tested EOS system may reduce aerosol contamination in the clinical dental setting, especially in proximity to the patient's head, where most aerosols are generated.

A novel dental biosafety device to control the spread of potentially contaminated dispersion particles from dental ultrasonic tips.

Strategies to return to dental practice in pandemic times is a new challenge due to the generation and spread of potentially contaminated dispersion particles (PCDP) that may contain the SARS-CoV-2, the etiological factor of the COVID-19 disease. Due to the significant dispersion of PCDP in the dental environment, the use of equipment such as ultrasonic tips have been inadvisable during the pandemic. Several clinical procedures, however, benefit from the use of such equipment. Thus, using a microbial dispersion model of PCDP, the aim of this study was to compare the dispersion caused by the dental drill (DD) an ultrasonic tip (UT) alone and the UT coupled with a Spray control (SC) device. The DD, UT (with or without the SC) were activated for one minute having had the water from the reservoir replaced with a suspension of Lactobacillus casei Shirota (1.5 x 108 CFU/mL). Petri dishes containing MRS agar were positioned at 50cm, 100cm and 150cm from the headrest of the dental chair at different angles (0 degree and 90 degrees). At 50 cm, the mean CFU (standard deviation) of L. casei Shirota was 13554.60 (4071.03) for the DD, 286.67 (73.99) for the US (97.89% reduction), and 4.5 (0.58) CFU for the UT-SC (p < 0.0001), establishing a further 98.43% reduction between UT and UT with SC. The UT with SC model proved effective in reducing dispersion from the UT, endorsing its use as an additional strategy to reduce PCDP in the dental environment in times of pandemic.

Effect of adjunctive diode laser in the non-surgical periodontal treatment in patients with diabetes mellitus: a systematic review and meta-analysis.

This study aimed to systematically review and analyze the present randomized clinical trials (RCTs) regarding the clinical efficacy of a diode laser (DL) adjuvant to scaling and root planning (SRP) in patients with chronic periodontitis (CP) who have diabetes mellitus (DM). Five databases (MEDLINE, EMBASE, Cochrane Central Register of Controlled Trails, Web of Science, and Chinese BioMedical Literature Databases) were searched. A meta-analysis was implemented to evaluate periodontal parameters including probing depth (PD) and clinical attachment level (CAL) as primary outcomes. Hemoglobin A1c (HbA1c), plaque index (PI), and the gingival index (GI) were also observed as secondary outcomes. Independent scanning of 239 papers resulted in 9 RCTs. Moderate evidence demonstrated that the test groups showed significant benefits for PD reduction, CAL gain, and HbA1c reduction after 3 and 6 months. Significant differences in PI and GI reduction were not found except for GI reduction within 1 month. The collective evidence suggested that the DL with SRP had significant improvements in clinical results compared to SRP alone. Based on our results, the DL could be a recommended therapy for patients with CP who have DM.

Imaging and Quantification of the Area of Fast-Moving Microbubbles Using a High-Speed Camera and Image Analysis.

An experimental and image analysis technique is presented for imaging cavitation bubbles and calculating their area. The high-speed imaging experimental technique and image analysis protocol presented here can also be applied for imaging microscopic bubbles in other fields of research; therefore, it has a wide range of applications. We apply this to image cavitation around dental ultrasonic scalers. It is important to image cavitation to characterize it and to understand how it can be exploited for various applications. Cavitation occurring around dental ultrasonic scalers can be used as a novel method of dental plaque removal, which would be more effective and cause less damage than current periodontal therapy techniques. We present a method for imaging the cavitation bubble clouds occurring around dental ultrasonic scaler tips using a high-speed camera and a zoom lens. We also calculate the area of cavitation using machine learning image analysis. Open source software is used for image analysis. The image analysis presented is easy to replicate, does not require programming experience, and can be modified easily to suit the application of the user.

A comparative scanning electron microscopy study between the effect of an ultrasonic scaler, reciprocating handpiece, and combined approach on the root surface topography in subgingival debridement.

OBJECTIVE: This study aimed to analyze the effectiveness of root-shape inserts mounted on a reciprocating handpiece during the procedure of root surface debridement (RSD) on extracted teeth. Three different approaches were compared: ultrasonic scaling, employment of root-shape inserts mounted on a reciprocating handpiece, and a combination of both. MATERIALS AND METHODS: A total of 51 extracted teeth were divided into three groups. The first group was instrumented with an ultrasonic scaler, the second group with flexible root-shape inserts mounted on a reciprocating handpiece (grain size 40, 15, and 4 µm), whereas the final group underwent a combination of both approaches. The time required for the instrumentation was taken. The specimens were subjected to optical and scanning electron microscopy (SEM), and the photographs were evaluated by three examiners who were blinded to the study. The parameters included were: SEM roughness index (SRI) for the roughness calculation, remaining calculus Index (RCI) to evaluate the residual calculus deposits, and loss of tooth substance index (LTSI) to evaluate the loss of tooth substance caused by instrumentation. RESULT: The results revealed that the time taken for the instrumentation was on average longer when the root-shape inserts were employed alone, meanwhile the combined approach did not show significant difference in comparison with the ultrasonic scaling. The lower average RCI was obtained with a combined approach. The use of root-shape inserts seems to cause a moderate increase in LTSI, especially in a combined approach, whereas it resulted in a better average SRI. CONCLUSION: The employment of root-shape inserts seems to be effective in the RSD for its ability to obtain a smooth and calculus-free instrumented surface, especially when used in combination with an ultrasonic scaler, and their use can so represent a valid approach to be tested in further in vivo studies.

Effects of subgingival air-polishing with trehalose powder on oral biofilm during periodontal maintenance therapy: a randomized-controlled pilot study.

BACKGROUND: This pilot study was part of a larger study which compared the effect of subgingival air-polishing using trehalose powder with sonic scaling on clinical parameters during supportive periodontal therapy. Within this microbiological part of the investigation subgingival samples were taken from 10 participants to analyze the survival of different bacterial species after the two different treatments as a proof of principle. METHODS: In 10 participants two non-adjacent, single-root teeth requiring treatment (PD =5 mm with bleeding on probing (BOP) or > 5 mm) were selected following a split-mouth design and were treated either with a sonic scaler or air-polishing device and trehalose powder. For persistent pockets (PD =4 mm and BOP or > 4 mm), treatment was repeated after 3 months. Subgingival biofilm samples were taken at baseline (BL), subsequently and three and six months after treatment. After determination of the bacterial counts (TBL), isolated bacteria were identified by MALDI-TOF-MS. If unsuccessful, PCR and 16S rDNA sequencing were performed. RESULTS: In both treatment groups, TBL decreased immediately after treatment remaining at a lower level. This confirms the findings of the larger study regarding clinical parameters showing a comparable effect on PD, BOP and CAL. Immediately after treatment, the diversity of detected species decreased significantly more than in the sonic group (p = 0.03). After 3 months, the proportion of Gram-positive anaerobic rods was lower in the air-polishing group (powder/ sonic 7%/ 25.9%, p = 0.025). Also, there was a greater reduction of Gram-negative aerobic rods for this group at this time (air-polishing/ sonic - 0.91 / -0.23 Log10 cfu/ ml, p = 0.020). CONCLUSION: Within the limitations of this study air-polishing and sonic treatment seem to have a comparable effect on the subgingival oral biofilm during supportive periodontal treatment. TRIAL REGISTRATION: The study was registered in an international trial register (German Clinical Trial Register number DRKS 00006296) on 10th of June 2015. HTML&TRIAL_ID = DRKS00006296.

A randomised controlled trial to determine patient experience of a magnetostrictive stack scaler as compared to a piezoelectric scaler, in supportive periodontal therapy.

OBJECTIVES: To compare the pain/discomfort experienced by patients in supportive periodontal therapy, following treatment with a piezoelectric ultrasonic scaler, designed for use with warmed water irrigation, and a magnetostrictive ultrasonic scaler. METHODS: This was a single-centre, randomised, split mouth study with regard to side, and crossover with regard to treatment order. Patients attending general dental practice for supportive periodontal therapy were randomised to receive treatment from one scaler on the left and the other scaler on the right-hand side of the mouth, the left side of the mouth always being treated first. The piezo scaler (Tigon+®) was used with room temperature irrigation for half of the participants (approx 20 °C) and warmed water irrigation (approx 36 °C) for the other half. The magnetostrictive scaler (Cavitron Select SPS 30K®) was used with room temperature irrigation (approx 20 °C) only. Participants rated their pain/discomfort, noise and vibration by VAS scale. RESULTS: 140 participants completed the study. Mean VAS scores for all measures were significantly better for the piezo scaler used with warm irrigation as compared to the magnetostrictive scaler p < 0.001. When both scalers were used with room temperature irrigant, there were no significant differences in the VAS scores between scalers (pain/discomfort, p = 0.68; noise p = 0.2; vibration p = 0.85). CONCLUSIONS: Participants indicated to statistical significance, less pain/discomfort, noise and vibration when the piezo scaler (Tigon+®) device was used with warmed irrigant, compared to the magnetostrictive scaler (Cavitron Select SPS 30K®). There were no significant differences between the instruments when room temperature irrigant was used. CLINICAL SIGNIFICANCE: Regular scaling in supportive periodontal therapy, is essential for maintenance of susceptible patients, however it can be painful due to dentine hypersensitivity deterring patients from attending. Using a piezo scaler with warm water improves patient quality of life and subsequent oral health. This may have positive effects on patient attendance. ISRCTN REGISTERED: ISRCTN15573995.

Profilometric Analysis of Periodontally Diseased Root Surfaces After Application of Different Instrumentation Tools: An In Vitro Study.

Objective: The topography of the root surface plays an important role in plaque accumulation, cell adhesion, and periodontal healing. The aim of this study is to profilometrically evaluate the root surface changes following the instrumentation using different tools. Methods: Forty dentin blocks of buccal and lingual root surfaces were obtained from 20 single-rooted periodontally diseased hopeless teeth and randomly divided into 4 groups. Each group was subjected to different root instrumentation tools such as stainless steel (SS) Gracey curette (Group 1); titanium nitride (TIN) Gracey curette (Group 2); ultrasonic piezoelectric device with a special tip designed for root surfaces (H3) (Group 3); and Er:YAG laser (Er:YAG tip) chisel (Group 4). A calibrated clinician instrumented all surfaces in each group. The root surfaces were profilometrically evaluated before and after instrumentations. Results: There were no statistical differences between the initial roughness levels of the groups. TIN curettes revealed the most prominent effect on smoothing the surface, whereas the Er:YAG tip showed the highest roughness in comparison with the other root surface instrumentation tools. Conclusions: Considering the importance of root surface roughness after treatment for the success of periodontal therapy, the TIN curette was the most periodontally appealing tool followed by H3, SS curette, and Er:YAG tip.

The effect of miniaturized manual versus mechanical instruments on calculus removal and root surface characteristics: An in vitro light microscopic study.

Objectives: The aim of this study was to evaluate by light microscopy analysis the effect of the use of miniaturised piezoelectric tips versus mini-five area specific curets on calculus removal and postoperative root surface alterations. Methods: A total of 20 extracted teeth were used. Two square surfaces (5×5 mm) were marked on each root surface with a diamond bur mounted on a high-speed handpiece. Before and after instrumentation, a series of magnified images (4.2×) of each experimental surface were taken with a standardized approach. According to a randomization list, the two surfaces on each sample were instrumented in a standardised fashion either with a mine-five curet or a slim piezoelectric tip. The images were processed using an imaging software. Data were summarised as means and standard deviations for the two outcomes (calculus and alterations.) at each time (pre and post) for both of the groups (manual and mechanical). Results: Both manual and mechanical instrumentation significantly reduced the calculus deposits (p < .001) without significant differences between the two groups. Both manual and mechanical treatments significantly increased alterations (p < .01). There was a statistically significant evidence of a greater increase in alterations from mechanical treatment. Conclusions: Slim mechanical piezoelectric tips and manual mini-five area-specific curets have similar effects on calculus removal. Manual instrumentation results in a more homogeneous postoperative root surface with less root alterations.

Calculus Removal and Root Surface Roughness When Using the Er:YAG or Er,Cr:YSGG Laser Compared with Conventional Instrumentation Method: A Literature Review.

Objective: The purpose of this literature review was to evaluate the effectiveness of using Er:YAG (erbium-doped yttrium/aluminum/garnet) laser or Er,Cr:YSGG (erbium, chromium-doped yttrium/scandium/gallium/garnet) laser on calculus removal and their effect on the topography and roughness of root surface in comparison with the conventional instruments in the nonsurgical periodontal therapy. Background data: One of the most challenging problems in treatment of periodontal disease is the elimination of plaque and calculus, leaving a clean and smooth root surface to decrease plaque and calculus retention, and for good gingival reattachment. Materials and methods: PubMed and Google Scholar were searched for available literature. The electronic search was limited to articles published in the period between January 2007 and April 2017, in the English language. Results: A total of 47 publications fulfilled the inclusion criteria of this systematic review and screened according to the research questions. Calculus removal using the ultrasonic instrument showed remaining calculus compared with the hand instrument, whereas, on the contrary, erbium lasers revealed no remaining calculus or smaller amounts compared with the conventional instruments when used in appropriate settings. The results of this review showed that ultrasonic instrumentation produced effects on the root surface almost similar to that of hand instrumentation. Er:YAG laser and Er,Cr:YSGG laser clarify a little more surface roughness when compared with conventional instruments. Conclusions: The present systematic review indicates that a combination of scaling and root planing (SRP) using the erbium lasers as an adjunctive therapy at certain parameters can be appropriate to remove residual debris from the root surface and at the same time have little or no negative thermal effect on the root surface. The Er:YAG laser also seems to be the most suitable for nonsurgical periodontal therapy. Additional new good-designed studies are needed to evaluate the effectiveness of erbium lasers with SRP in nonsurgical periodontal therapy.

Comparison of calculus detection among dental hygienists using an explorer and ultrasonic insert.

INTRODUCTION: Periodontal therapy disrupts the biofilm harbouring calculus that triggers inflammation. The explorer is primarily used for calculus detection, and the ultrasonic instrument is primarily used for calculus removal. The efficiency in dental hygiene care may improve if the ultrasonic instrument could be used in both calculus detection and removal. PURPOSE: The purpose of this study was to validate the effectiveness of calculus detection between the Thinsert® ultrasonic insert and the 11/12 explorer. METHODS: Upon IRB approval, this validation study involved three dental hygiene faculty from the Ohio State University Dental Hygiene Program and 30 patient participants from the Ohio State University community. Using both instruments, calculus was evaluated on Ramfjord index teeth and on four possible surfaces per tooth. Data were analysed to evaluate for interrater reliability, intrarater reliability, sensitivity, and specificity. RESULTS: For interrater reliability, the average measure of intraclass coefficient (ICC) value was 0.782 with a 95% confidence interval (CI) of 0.749-0.810 (F(1439, 2878)  = 4.852, P < 0.01). For intrarater reliability, mean Kappa averages were in the full agreement range (κ = 0.726, n = 2160, P < 0.01). When using the Thinsert® for calculus detection, the sensitivity was 75%, specificity was 97%, PPV was 81%, and NPV was 94%. CONCLUSION: Since calculus evaluation was comparable when using the ODU 11/12 explorer and the Thinsert®, efforts can be focused on developing the tactile sensitivity when using the Thinsert® ultrasonic instrument in the assessment, treatment, and maintenance of periodontal disease and the support of oral health. The efficiency in dental hygiene care may improve by using the Thinsert® ultrasonic instrument in both the detection and removal of calculus.

Scaling and Root Planing Effect to mRNA Expression of Matrix Metalloproteinase-9 and Periodontal Clinical Parameters on Chronic Periodontitis

Abstract Objective: To evaluate the relationship between the mRNA transcription level of Matrix Metalloproteinase-9 (MMP-9) and the selected clinical periodontal healing at one month of scaling and root planing. Material and Methods: A total of six chronic periodontitis patients and one periodontally healthy subject were recruited. The gingival crevicular fluid was collected from all subjects, and the expression level of MMP-9 mRNA was measured by quantitative real-time PCR. Pocket depth, papilla bleeding index, and clinical attachment loss were measured on day 1 at baseline and day 30. Scaling and root planing was performed on day 1. Data were analyzed using SPSS 22.0 software Results: In comparison to the control, periodontal clinical parameters in the treatment group were significantly reduced after scaling and root planing. MMP-9 mRNA expression did not show a significant change after the 30th day. A weak correlation was noted between the MMP-9 mRNA transcription level and the changed PBI measurement Conclusion: Scaling and root planing is clinically effective for chronic periodontitis with a 4-6 mm pocket, whereas the expression of MMP-9 mRNA was not altered. Further studies with a more extended observation period are needed to confirm or reject the present findings.

Comparative evaluation of chlorhexidine and cinnamon extract used in dental unit waterlines to reduce bacterial load in aerosols during ultrasonic scaling.

BACKGROUND: Dental unit waterlines (DUWL) are believed to be a source of infection. Ultrasonic instruments generate aerosols with significantly greater numbers of bacteria. Chlorhexidine (CHX) exhibits significant antiseptic effect. Recently, cinnamon (CIN) has been displayed to have antibacterial and anti-inflammatory properties in vivo. AIM: The aim of this study is to compare and evaluate the efficacy of CHX versus CIN extract in the reduction of bacterial count in dental aerosols when used as an irrigant through DUWL during ultrasonic scaling. MATERIALS AND METHODS: Sixty patients with moderate-to-severe gingivitis were randomly divided into 3 groups of 20 patients each undergoing ultrasonic scaling. For experimental group I, CHX was added in dental unit reservoir before ultrasonic scaling. Similarly, in group II, CIN extract was used and group III served as control where distilled water (DW) was used. The aerosols from ultrasonic units were collected on two blood agar plates at three different positions. One plate from each position was incubated aerobically for 48 h and other plate anaerobically for 72 h. The total number of colony forming units (CFUs) was then calculated and statistically interpreted. RESULTS: CHX and CIN both were equally effective (P > 0.05) in reducing the bacterial count in aerosols as compared to DW (P < 0.05) when used through DUWL. Maximum contamination was seen on the agar plate placed at the chest of the patient. CONCLUSION: Both CIN and CHX used as an irrigant through DUWL effectively helped in the reduction of bacterial count in dental aerosols.

Dental Treatment Effect on Deep Brain Stimulation System in Parkinson's Disease.

Parkinson's disease (PD) is a highly prevalent, long-term neurodegenerative disorder that is sometimes treated by deep brain stimulation (DBS), which significantly reduces the need for dopaminergic drug therapy and improves quality of life. Such patients are cautioned, however, that dental instruments such as a dental turbine or ultrasonic scaler may adversely affect the functioning of such a system. Here, we report dental treatment for right maxillary tooth pain in a 65-year-old woman undergoing DBS for PD. The diagnosis was occlusal trauma. After verification with occluding paper each time, treatment comprised milling of the high contact points of tooth #17, followed by scaling with an ultrasonic scaler. This treatment was spread out over 3 visits, and its course was uneventful. To our knowledge, there are no previous reports on the interaction between dental instruments and DBS systems. Although no interference with the DBS system was observed here, we believe that the dentist should be aware of the potential for such, especially with the use of devices used to measure root canal length, dental lasers, and electrical scalpels.