Desulfovibrio fairfieldensis adhesion on implantable titanium used in odontology: a preliminary study.

The study presented here aimed to assess the ability of Desulfovibrio fairfieldensis bacteria to adhere to and form biofilm on the structure of titanium used in implants. D. fairfieldensis was found in the periodontal pockets in the oral environment, indicating that these bacteria can colonize the implant-bone interface and consequently cause bone infection and implant corrosion. Plates of implantable titanium, of which surfaces were characterized by scanning electronic microscopy and Raman spectroscopy, were immersed in several suspensions of D. fairfieldensis cells containing potassium nitrate on the one hand, and artificial saliva or a sulfato-reducing bacterial culture medium on the other hand. Following various incubation timepoints bacteria were counted in different media to determine their doubling time and titanium samples are checked for and determination of the total number of adhered bacteria and biofilm formation. Adhesion of D. fairfieldensis on titanium occurs at rates ranging from 2.105 to 4.6.106 bacteria h-1cm-2 in the first 18 h of incubation on both native and implantable titanium samples. Following that time, the increase in cell numbers per h and cm2 is attributed to growth in adhered bacteria. After 30 days of incubation in a nutrient-rich medium, dense biofilms are observed forming on the implant surface where bacteria became embedded in a layer of polymers D. fairfieldensis is able of adhering to an implantable titanium surface in order to form a biofilm. Further studies are still necessary, however, to assess whether this adhesion still occurs in an environment containing saliva or serum proteins that may alter the implant surface.

Septic arthritis caused by Desulfovibrio desulfuricans: A case report and review of the literature.

Septic arthritis can occur by hematogenous seeding, direct joint inoculation, or extension of a bone infection into the joint. We report a case of septic arthritis of the hip caused by Desulfovibrio desulfuricans, an anaerobic sulfur-reducing bacteria. The patient underwent debridement followed by targeted antibiotic therapy with infection resolution.

Accelerated corrosion of pipeline steel in the presence of Desulfovibrio desulfuricans biofilm due to carbon source deprivation in CO2 saturated medium.

The chemistry of bacterial biofilms as well as the nutritional composition of culture environments may differ at any time within a growth process, especially for SRB consortia within oil wells with limited carbon sources. In the oilfield, the presence of SRB biofilms on surfaces of steel substrates leads to microbiologically influenced corrosion and compromised material integrity. In this work, the survival of SRB cells and their impact on the pipeline steel corrosion within simulated CO2-saturated oilfield-produced water with different concentrations of organic carbon source have been investigated. Cell counts reduced with the level of carbon source reduction (CSR) after incubation but more sessile cells survived at 80% CSR (moderate carbon starvation) compared to 100% CSR (extreme carbon starvation). The energy needed for cellular survival as well as biological support toward MIC could have been harnessed by a combination of extracellular Feo oxidation and intracellular sulfate reduction even after carbon source starvation. Severe anodic steel dissolution was observed at the end of the culture period within the simulated CO2-saturated oilfield-produced water, and this is attributed to SRB-led MIC and CO2 corrosion. Pipeline steel corroded more when cultured within 80% CSR compared to the medium with both lactate and citrate. Steel substrate corroded less with 100% CSR due to severely weakened SRB biofilms from nutrient deprivation.

Desulfovibrio desulfuricans bacteremia: A case report and literature review.

Desulfovibrio spp. are sulfate-reducing, anaerobic bacteria that are ubiquitously found in the environment. These organisms infrequently cause human infections, and the clinical characteristics of infection with Desulfovibrio spp. remain unclear. Here, we describe a case of Desulfovibrio desulfuricans bacteremia in an 88-year-old Japanese man with a past medical history of thoracic endovascular aortic repair (TEVAR). His chief complaint was hemoptysis for 2 weeks. A chest contrast-enhanced computed tomography demonstrated an enlarged thoracic aortic aneurysm surrounded by a ring-enhanced lesion, recognized as mediastinal abscess. Gram-negative spiral bacilli were detected in anaerobic blood culture. These bacteria could not be identified using conventional methods, but by analyzing a full base sequence of 16S rDNA, they were identified as D. desulfuricans subsp. desulfuricans. The patient underwent an emergent re-TEVAR, and the infection subsided after being treated with tazobactam/piperacillin and clindamycin, followed by metronidazole. A literature review of previous cases of D. desulfuricans bacteremia suggested that the pathogen was derived from bacterial translocation from the intestine in most cases. Desulfovibrio infection is presumably underestimated due to its infrequency, indolent growth, and difficulty in identification. Desulfovibrio spp. should be suspected when spiral rods are observed in anaerobic culture, and molecular analysis is required for accurate species-level differentiation of the pathogens. To better understand the pathogenicity of these fastidious organisms, further cases based on the exact bacterial identification should be investigated.

Initial stage of the biofilm formation on the NiTi and Ti6Al4V surface by the sulphur-oxidizing bacteria and sulphate-reducing bacteria.

The susceptibility to the fouling of the NiTi and Ti6Al4V alloys due to the adhesion of microorganisms and the biofilm formation is very significant, especially in the context of an inflammatory state induced by implants contaminated by bacteria, and the implants corrosion stimulated by bacteria. The aim of this work was to examine the differences between the sulphur-oxidizing bacteria (SOB) and sulphate-reducing bacteria (SRB) strains in their affinity for NiTi and Ti6Al4V alloys. The biofilms formed on alloy surfaces by the cells of five bacterial strains (aerobic SOB Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans, and anaerobic SRB Desulfovibrio desulfuricans-3 strains) were studied using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The protein concentrations in liquid media have also been analyzed. The results indicate that both alloys tested may be colonized by SOB and SRB strains. In the initial stage of the biofilm formation, the higher affinity of SRB to both the alloys has been documented. However, the SOB strains have indicated the higher (although differentiated) adaptability to changing environment as compared with SRB. Stimulation of the SRB growth on the alloys surface was observed during incubation in the liquid culture media supplemented with artificial saliva, especially of lower pH (imitated conditions under the inflammatory state, for example in the periodontitis course). The results point to the possible threat to the human health resulting from the contamination of the titanium implant alloys surface by the SOB (A. thiooxidans and A. ferrooxidans) and SRB (D. desulfuricans).

Dispersal and inhibitory roles of mannose, 2-deoxy-d-glucose and N-acetylgalactosaminidase on the biofilm of Desulfovibrio vulgaris.

Biofilms of sulfate-reducing bacteria (SRB) are often the major cause of microbiologically influenced corrosion. The representative SRB Desulfovibrio vulgaris has previously been shown to have a biofilm that consists primarily of protein. In this study, by utilizing lectin staining, we identified that the biofilm of D. vulgaris also consists of the matrix components mannose, fucose and N-acetylgalactosamine (GalNAc), with mannose predominating. Based on these results, we found that the addition of mannose and the nonmetabolizable mannose analog 2-deoxy-d-glucose inhibits the biofilm formation of D. vulgaris as well as that of D. desulfuricans; both compounds also dispersed the SRB biofilms. In addition, the enzyme N-acetylgalactosaminidase, which degrades GalNAc, was effective in dispersing D. vulgaris biofilms. Therefore, by determining composition of the SRB biofilm, effective biofilm control methods may be devised.

Nanopatterning of steel by one-step anodization for anti-adhesion of bacteria.

Surface nanopatterning of metals has been an effective technique for improved performance and functionalization. However, it is of great challenge to fabricate nanostructure on carbon steels despite their extensive use and urgent needs to maintain the performance reliability and durability. Here, we report a one-step anodization technique to nanopattern a carbon steel in 50 wt.% NaOH solution for highly effective anti-adhesion by sulphate reducing bacteria (SRB), i.e., Desulfovibrio desulfuricans subsp. desulfuricans (Beijerinck) Kluyver and van Niel. We characterize the morphology, structure, composition, and surface roughness of the nanostructured film formed on the steel as a function of anodizing potential. We quantify the surface hydrophobicity by contact angle measurements, and the SRB adhesion by fluorescent analysis. The optimal anodization potential of 2.0 V is determined for the best performance of anti-adhesion of SRB to the steel, resulting in a 23.5 times of reduction of SRB adhesion compared to bare steel. We discuss the mechanisms for the film formation on the steel during anodization, and the high-performance anti-adhesion of bacteria to nanopatterned steels. Our technique is simple, cost-effective and environment-friendly, providing a promising alternative for industry-scale surface nanopatterning of carbon steels for effective controlling of bacterial adhesion.

Influence of respiratory substrate in carbon steel corrosion by a Sulphate Reducing Prokaryote model organism.

Sulphate Reducing Prokaryotes (SRP) are an important group of microorganisms involved in biocorrosion processes. Sulphide production is recognized as a fundamental cause of corrosion and nitrate is often used as treatment. The present work analyses the influence of respiratory substrates in the metal, from off-shore installations, SRP influenced corrosion, using Desulfovibrio desulfuricans ATTC 27774 as model organism, since this can switch from sulphate to nitrate. Open Circuit Potential over 6days in different conditions was measured, showing an increase around 200 and 90mV for the different media. Tafel plots were constructed allowing Ecorr and jcorr calculations. For SRP in sulphate and nitrate media Ecorr values of -824 and -728mV, and jcorr values of 2.5 and 3.7µAcm(-2), respectively, were attained indicating that in nitrate, the resultant corrosion rate is larger than in sulphate. Also, it is shown that the equilibrium of sulphide in the solution/gas phases is a key factor to the evolution of corrosion Nitrate prevents pitting but promotes general corrosion and increases the corrosion potential and iron dissolution 40 times when compared to sulphate. Our results demonstrate that nitrate injection strategy in oil fields has to be considered carefully as option to reduce souring and localized corrosion.

Investigation of mercury methylation pathways in biofilm versus planktonic cultures of Desulfovibrio desulfuricans.

Biofilms can methylate mercury (Hg) at higher rates than unattached bacteria and are increasingly recognized as important Hg methylation sites in the environment. Our previous study showed that methylation rates in biofilm cultures were up to 1 order of magnitude greater than those in planktonic cultures of a sulfate-reducing bacterium. To probe whether the differential Hg methylation rates resulted from metabolic differences between these two cultures, Hg methylation assays following molybdate or chloroform inhibition (a specific inhibitor of the acetyl-CoA pathway) were conducted on biofilm and planktonic cultures of Desulfovibrio desulfuricans strains M8 and ND132. Molybdate was as effective in inhibiting Hg methylation as well as growth in both planktonic and biofilm cultures. The addition of chloroform only impacted Hg methylation in biofilm cultures, suggesting that different pathways are used for methylation in biofilm compared to planktonic cultures. To investigate this further, expression of the cooS gene, which encodes for carbon monoxide dehydrogenase, a key enzyme in the acetyl-CoA pathway, was compared in biofilm and planktonic cultures of ND132. Biofilm cultures showed up to 4 times higher expression of cooS than planktonic cultures. On the basis of these results, the acetyl-CoA pathway appears to play an important role in methylation in biofilm cultures of this organism, possibly by supplying the methyl group to Hg methylating enzymes; methylation in planktonic cultures appears to be independent of this pathway. This observation has important implications, particularly in developing reliable models to predict Hg methylation rates in different environments and perhaps eventually in being able to control this undesirable chemical transformation.

The role of Desulfovibrio desulfuricans lipopolysaccharides in modulation of periodontal inflammation through stimulation of human gingival fibroblasts.

OBJECTIVE: Periodontitis is a destructive disease which is likely to be the result of the activities of different microbial complexes. Recently, sulphate-reducing bacteria (SRB) have been detected in the oral cavity, and they have been found to be common inhabitants of sites showing periodontal destruction. The aim of study was to evaluate the influence of endotoxins of Desulfovibrio desulfuricans bacteria on human gingival fibroblast HGF-1 line. METHODS: The immunological response of gingival fibroblasts was evaluated by determination of their IL-6 and IL-8 secretion upon treatment with D. desulfuricans intestinal and type strain LPS, sodium butyrate (NaB) and IL-1beta. The amounts of cytokines were estimated by ELISA immunoassay. The influence of LPS and NaB on fibroblast proliferation was determined using the CyQUANT Cell Proliferation Assay Kit. RESULTS: No significant growth inhibition of cells exposed to LPS was observed, except for the culture growing in the presence of intestinal strain endotoxin at the highest concentration (100 microg/ml). The secretion of IL-6 and IL-8 by fibroblasts was increased by D. desulfuricans endotoxins. Cells stimulated with proinflammatory cytokine 1L-1beta showed very high levels of both cytokines secretion. The release of IL-6 and IL-8 by cells in response to LPS and 1L-1beta was modulated by butyric acid. CONCLUSIONS: The observed response of gingival fibroblasts to stimulation by endotoxin suggests that D. desulfuricans can be involved in the pathogenesis of periodontitis. Moreover, butyrate present in the oral cavity seems to have immunoregulatory effect on cytokine production by gingival fibroblasts under physiological conditions and during microbe-induced inflammation.

[Effect of nickel ions on physiological and corrosion activity of bacteria of sulfur cycle].

The paper deals with the effect of nickel ions concentration in nutrient medium on sulfate-reducing bacteria Desulfovibrio desulfuricans 10-V (SRB) and their artificial corrosion-active associations which included thionic bacteria and their satellite Stenotrophomonas maltophilia. It is shown that the concentration of nickel in the nutrient medium being increased, the duration of lag-phase of SRB growth became 2-2.5 times less, and that of artificial associations--3-3.5 times less. The specific growth rate did not change in all the experiment variants. At the same time the hydrogenase and corrosion activity of the studied cultures increases almost twice with nickel content increase in the cultural medium to 0.5 mg/ml. Further increase of nickel concentration did not cause the change of the above parameters.

Pseudosymmetry, high copy number and twinning complicate the structure determination of Desulfovibrio desulfuricans (ATCC 29577) flavodoxin.

The crystal structure of oxidized flavodoxin from Desulfovibrio desulfuricans (ATCC 29577) was determined by molecular replacement in two crystal forms, P3(1)21 and P4(3), at 2.5 and 2.0 A resolution, respectively. Structure determination in space group P3(1)21 was challenging owing to the presence of pseudo-translational symmetry and a high copy number in the asymmetric unit (8). Initial phasing attempts in space group P3(1)21 by molecular replacement using a poor search model (46% identity) and multi-wavelength anomalous dispersion were unsuccessful. It was necessary to solve the structure in a second crystal form, space group P4(3), which was characterized by almost perfect twinning, in order to obtain a suitable search model for molecular replacement. This search model with complementary approaches to molecular replacement utilizing the pseudo-translational symmetry operators determined by analysis of the native Patterson map facilitated the selection and manual placement of molecules to generate an initial solution in the P3(1)21 crystal form. During the early stages of refinement, application of the appropriate twin law, (-h, -k, l), was required to converge to reasonable R-factor values despite the fact that in the final analysis the data were untwinned and the twin law could subsequently be removed. The approaches used in structure determination and refinement may be applicable to other crystal structures characterized by these complicating factors. The refined model shows flexibility of the flavin mononucleotide coordinating loops indicated by the isolation of two loop conformations and provides a starting point for the elucidation of the mechanism used for protein-partner recognition.

Oligosaccharide-mediated inhibition of the adhesion of pathogenic Escherichia coli strains to human gut epithelial cells in vitro.

The aim of the study was to investigate the ability of pectic oligosaccharides (POS) to inhibit adhesion of three strains of verotoxigenic Escherichia coli, three strains of enteropathogenic E. coli, and one nonclinical strain of Desulfovibrio desulfuricans to human intestinal epithelial cell cultures. Lactobacillus acidophilus and Lactobacillus gasseri were included for comparison. Attachment was determined in the human HT29 cell line by viable count of adherent bacteria. POS in buffer at pH 7.2 were antiadhesive at a dose of 2.5 mg ml(-1), reducing adhesion of enteropathogenic E. coil and verotoxigenic E. coli strains to less than 30% of control values. Concentrations resulting in 50% inhibition ranged from 0.15 to 0.46 mg ml(-1). L. acidophilus was not significantly affected, but adhesion of L. gasseri was reduced to 29% of the control value. POS reduced the adhesion of D. desulfuricans to 0.33% of the control value. POS also had a protective effect against E. coli verocytotoxins VT1 and VT2 at concentrations of 0.01 and 1 microg ml(-1), respectively.

Enhancement of biogenic sulfide production in a packed-bed bioreactor via critical inoculum design and carrier material selection.

Sulfate reducing bacteria (SRB) are commonly used in environmental bioprocesses for the treatment of acid mine drainage and sulfate wastewaters. Biogenic H(2)S is also a potential source of H(2) fuel with the recent development of H(2)S splitting technologies. In this study, a sulfate reducing packed bed bioreactor (PBR) capable of rapidly achieving high volumetric productivities was developed using a novel method of rational inoculum design and the selection of improved biomass carrier materials. An inoculum with initial composition of approximately 95% Desulfovibrio desulfuricans (ATCC 7757) and 5% SRB consortium was designed based on the pure strain's superior immobilization potential and the SRB consortium's superior kinetics. Diatomaceous earth (DE) pellets, porous glass beads, polyurethane foam and bone char were evaluated as potential biomass carrier materials. The DE pellets immobilized the most biomass and were employed in two packed bed bioreactor fermentations. Using the designed inoculum and DE pellets, a packed bed bioreactor achieved a volumetric productivity of 493 mol H(2)S m(-3) day(-1) (based on a 308 mL working volume) with a dissolved sulfide concentration of 9.9 mM. This occurred after 8.3 days of operation and represents a tenfold reduction in the start-up period compared to other sulfate reducing PBRs described in the literature.

The influence of ionic strength, nutrients and pH on bacterial adhesion to metals.

Bacteria-metal interactions in aqueous solutions are important in biofilm formation, biofouling and biocorrosion problems in the natural environment and engineered systems. In this study, the adhesion forces of two anaerobes (Desulfovibrio desulfuricans and Desulfovibrio singaporenus) and an aerobe (Pseudomonas sp.) to stainless steel 316 in various aqueous systems were quantified using atomic force microscopy (AFM) with a cell probe. Results show that the nutrient and ionic strength of the solutions influence the bacteria-metal interactions. The bacteria-metal adhesion force was reduced in the presence of the nutrients in the solution, because a trace organic film was formed and thus decreased the metal surface wettability. Stronger ionic strength in the solution results in a larger bacteria-metal adhesion force, which is due to the stronger electrostatic attraction force between the positively charged metal surface and negatively charged bacterial surface. Solution pH also influences the interaction between the bacterial cells and the metal surface; the bacteria-metal adhesion force reached its highest value when the pH of the solution was near the isoelectric point of the bacteria, i.e. at the zero point charge. The adhesion forces at pH 9 were higher than at pH 7 due to the increase in the attraction between Fe ions and negative carboxylate groups.

Identification of genes that confer sediment fitness to Desulfovibrio desulfuricans G20.

Signature-tagged mutants of Desulfovibrio desulfuricans G20 were screened, and 97 genes crucial for sediment fitness were identified. These genes belong to functional categories including signal transduction, binding and transport, insertion elements, and others. Mutants with mutations in genes encoding proteins involved in amino acid biosynthesis, hydrogenase activity, and DNA repair were further characterized.

A dual-electrochemical cell to study the biocorrosion of stainless steel.

The presence of microorganisms on metal surfaces can alter the local physical/chemical conditions and lead to microbiologically influenced corrosion (MIC). The goal of the present work was to study the effect of a mixed aerobic-anaerobic biofilm on the behaviour of stainless steel (316 L) in underground conditions. Rather than testing different bacteria or consortia, investigations were based on the mechanisms of MIC. Mixed biofilms were simulated by the addition of glucose oxidase to reproduce the aerobic conditions and by sulphide or sulphate-reducing bacteria (SRB) for the anaerobic conditions. A double thermostated electrochemical cell has been developed to study the coupling between aerobic and anaerobic conditions. Results suggested a transfer of electrons from the stainless steel sample of the anaerobic cell to the stainless steel sample of the aerobic one. Inorganic sulphide was replaced by SRB in the anaerobic cell revealing an increase of the galvanic current which may be explained by an effect of lactate and/or acetate on the anodic reaction or by a high sulphide concentration in the biofilm. The results of this study underline that the dual-electrochemical cell system is representative of phenomena present in natural environments and should be considered as an option when studying MIC.

Hydrogen sulfide production from elemental sulfur by Desulfovibrio desulfuricans in an anaerobic bioreactor.

Feasibility of elemental sulfur reduction by Desulfovibrio desulfuricans in anaerobic conditions in a stirred reactor was studied. Hydrogen was used as energy source, whereas the carbonated species were bicarbonate and yeast extract. Attention was paid to reactor engineering aspects, biofilm formation on the sulfur surface, hydrogen sulfide formation rate and kinetics limitations of the sulfur reduction. D. desulfuricans formed stable biofilms on the sulfur surface. It was found that active sulfur surface availability limits the reaction rate. The reaction rate was first order with respect to sulfur and hydrogen velocity had no effect in the reaction rate for the range 8.2 x 10(-2) to 4.1 x 10(-1) Nm(3) m(-2) min(-1). At a superficial gas velocity (u(G)) = 3.1 x 10(-2) Nm(3) m(-2) min(-1), H(2)S(g) production rate decreased due to a deficient H(2)S stripping. A maximum H(2)S(g) production rate of 2.1 g H(2)S L(-1) d(-1) was achieved during 5 days with an initial sulfur density of 4.7% (w/v).

Force measurements of bacterial adhesion on metals using a cell probe atomic force microscope.

The adhesion of microbial cells to metal surfaces in aqueous media is an important phenomenon in both the natural environment and engineering systems. The adhesion of two anaerobic sulfate-reducing bacteria (Desulfovibrio desulfuricans and a local marine isolate) and an aerobe (Pseudomonas sp.) to four polished metal surfaces (i.e., stainless steel 316, mild steel, aluminum, and copper) was examined using a force spectroscopy technique with an atomic force microscope (AFM). Using a modified bacterial tip, the attraction and repulsion forces (in the nano-Newton range) between the bacterial cell and the metal surface in aqueous media were quantified. Results show that the bacterial adhesion force to aluminum is the highest among the metals investigated, whereas the one to copper is the lowest. The bacterial adhesion forces to metals are influenced by both the electrostatic force and metal surface hydrophobicity. It is also found that the physiological properties of the bacterium, namely the bacterial surface charges and hydrophobicity, also have influence on the bacteria-metal interaction. The adhesion to the metals by Pseudomonas sp. and D. desulfuricans was greater than by the marine SRB isolate. The cell-cell interactions show that there are strong electrostatic repulsion forces between bacterial cells. Cell probe atomic force microscopy has provided some useful insight into the interactions of bacterial cells with the metal surfaces.

Direct force measurement of bacteria adhesion on metal in aqueous media.

The adhesion of bacteria on metal surfaces in aqueous media and the development of biofilm and resultant biofouling are important phenomena in both the natural environment and engineering systems. This work reports on the use of a force microscopy technique to measure bacterial metal adhesion by two anaerobic sulphate-reducing bacteria (Desulfovibrio desulfuricans and a local marine isolate) and an aerobe (Pseudomonas sp.). Using a modified bacteria tip, the atomic force microscope was able to quantify the attraction and repulsion force in the nano-Newton range between the bacteria cell and metal surface in aqueous media. Results show that increasing surface hydrophobicity of the metal, and increasing the ionic strength of the aqueous medium both enhance the adhesion force. The adhesion forces were also influenced by the physiological properties of the bacterium, such as the bacterial surface charges and hydrophobicity.