Meniscal repair with additive manufacture of bioresorbable polymer: From physicochemical characterization to implantation of 3D printed poly (L-co-D, L lactide-co-trimethylene carbonate) with autologous stem cells in rabbits.

Three-dimensional (3D) structures are actually the state-of-the-art technique to create porous scaffolds for tissue engineering. Since regeneration in cartilage tissue is limited due to intrinsic cellular properties this study aims to develop and characterize three-dimensional porous scaffolds of poly (L-co-D, L lactide-co-trimethylene carbonate), PLDLA-TMC, obtained by 3D fiber deposition technique. The PLDLA-TMC terpolymer scaffolds (70:30), were obtained and characterized by scanning electron microscopy, gel permeation chromatography, differential scanning calorimetry, thermal gravimetric analysis, compression mechanical testing and study on in vitro degradation, which showed its amorphous characteristics, cylindrical geometry, and interconnected pores. The in vitro degradation study showed significant loss of mechanical properties compatible with a decrease in molar mass, accompanied by changes in morphology. The histocompatibility association of mesenchymal stem cells from rabbit's bone marrow, and PLDLA-TMC scaffolds, were evaluated in the meniscus regeneration, proving the potential of cell culture at in vivo tissue regeneration. Nine New Zealand rabbits underwent total medial meniscectomy, yielding three treatments: implantation of the seeded PLDLA-TMC scaffold, implantation of the unseeded PLDLA-TMC and negative control (defect without any implant). After 24 weeks, the results revealed the presence of fibrocartilage in the animals treated with polymer. However, the regeneration obtained with the seeded PLDLA-TMC scaffolds with mesenchymal stem cells had become intimal to mature fibrocartilaginous tissue of normal meniscus both macroscopically and histologically. This study demonstrated the effectiveness of the PLDLA-TMC scaffold in meniscus regeneration and the potential of mesenchymal stem cells in tissue engineering, without the use of growth factors. It is concluded that bioresorbable polymers represent a promising alternative for tissue regeneration.

Meldrum's acid derivates are MepA efflux pump inhibitors: In vitro and in silico essays.

Efflux pumps are proteins capable of expelling antibiotics from bacterial cells, have emerged as a major mechanism of bacterial resistance. In the ongoing pursuit to overcome and reduce bacterial resistance, novel substances are being explored as potential efflux pump inhibitors. Meldrum's acid, a synthetic molecule widely studied for its role in synthesizing bioactive compounds, holds promise in this regard. Therefore, the objective of this study is to evaluate the antibacterial activity of three derivatives of Meldrum's acid and assess their ability to inhibit efflux mechanisms, employing both in silico and in vitro approaches. The antibacterial activity of the derivatives was assessed using a broth microdilution testing method. Surprisingly, the derivatives did not exhibit direct antibacterial activity on their own. However, they displayed a significant effect in enhancing the efficacy of antibiotics, suggesting a potential role in potentiating their effects. Furthermore, fluorescence emission assays using ethidium bromide indicated that the derivatives could potentially block efflux pumps, as they exhibited fluorescence levels comparable to the positive control. To further investigate their inhibitory capacity, molecular docking studies were conducted in silico, revealing binding interactions similar to ciprofloxacin and carbonyl cyanide 3-chlorophenylhydrazone, known efflux pump inhibitors. These findings highlight the potential of Meldrum's acid derivatives as effective inhibitors of efflux pumps. By targeting these mechanisms, the derivatives offer a promising avenue to enhance the effectiveness of antibiotics and combat bacterial resistance. This study underscores the importance of exploring novel strategies in the fight against bacterial resistance and provides valuable insights into the potential of Meldrum's acid derivatives as efflux pump inhibitors. Further research and exploration in this field are warranted to fully exploit their therapeutic potential.

Efficacy and Safety of Clazosentan After Aneurysmal Subarachnoid Hemorrhage: An Updated Meta-Analysis.

BACKGROUND AND OBJECTIVES: Clazosentan has been studied to treat cerebral vasospasm after aneurysmal subarachnoid hemorrhage (aSAH).This meta-analysis of randomized controlled trials updates the current knowledge regarding the efficacy and safety of clazosentan compared with placebo after aSAH. METHODS: Databases were systematically searched for randomized controlled trials directly comparing the use of clazosentan and placebo for the treatment of cerebral vasospasm after aSAH. Additional eligibility criteria were the report of any of the outcomes of interest (vasospasm, morbidity, functional outcome, or mortality). The primary outcome was vasospasm-related delayed cerebral ischemia (DCI). The analyses were stratified by clazosentan dosage (low or high dose) and aneurysm treatment modality (clipping or coiling). The Cochrane RoB-2 tool was used for studies quality assessment. RESULTS: Six studies comprising 7 clinical trials were included, involving 2778 patients. Clazosentan decreased the risk of vasospasm-related DCI (risk ratio [RR] 0.56, 95% CI 0.38-0.81) and delayed ischemic neurological deficit (RR 0.63, 95% 0.50-0.80). Angiographic vasospasm (RR 0.54, 95% CI 0.47-0.61) was also decreased. Functional outcomes (favorable Glasgow Outcome Scale, RR 0.99, 95% CI 0.79-1.24) and death (RR 1.03, 95% CI 0.71-1.49) did not change. Meanwhile, adverse events were increased by clazosentan (RR 1.54, 95% CI 1.35-1.76). CONCLUSION: Clazosentan decreased vasospasm-related DCI and angiographic vasospasm but did not improve functional outcomes or mortality. Adverse events were increased by clazosentan.

Synthesis of nuevamine and a cyano-chilenine analog via divergent C(sp3)-H bond functionalization of isoindolinone derivatives.

Divergent C(sp3)-H bond functionalizations of isoindolinone derivatives were developed to synthesize nuevamine, a cyano-chilenine derivative, and two related analogs. A copper-catalyzed C-H cross-dehydrogenative coupling (via cation formation) allowed the formation of a new C-C bond leading to the direct assembly of the isoindolo[1,2-a]isoquinolinone tetracyclic system of the nuevamine. The syntheses of the cyano-chilenine derivatives were carried out by installing two nitrile groups under basic conditions (via anion formation). Then, the isoindolobenzazepinic system of the chilenine skeleton was constructed by a Houben-Hoesch cyclization process. The present methodology has the advantage of not requiring the use of pre-functionalized substrates.

Poly(L-co-D,L lactic acid-co-Trimethylene Carbonate) 3D printed scaffold cultivated with mesenchymal stem cells directed to bone reconstruction: In vitro and in vivo studies.

A recent and quite promising technique for bone tissue engineering is the 3D printing, peculiarly regarding the production of high-quality scaffolds. The 3D printed scaffold strictly provides suitable characteristics for living cells, in order to induce treatment, reconstruction and substitution of injured tissue. The purpose of this work was to evaluate the behavior of the 3D scaffold based on Poly(L-co-D,L lactic acid-co-Trimethylene Carbonate) (PLDLA-TMC), which was designed in Solidworks™ software, projected in 3D Slicer™, 3D printed in filament extrusion, cultured with mesenchymal stem cells (MSCs) and tested in vitro and in vivo models. For in vitro study, the MSCs were seeded in a PLDLA-TMC 3D scaffold with 600 µm pore size and submitted to proliferation and osteogenic differentiation. The in vivo assays implanted the PLDLA-TMC scaffolds with or without MSCs in the calvaria of Wistar rats submitted to 8 mm cranial bone defect, in periods of 8-12 weeks. The results showed that PLDLA-TMC 3D scaffolds favored adherence and cell growth, and suggests an osteoinductive activity, which means that the material itself augmented cellular differentiation. The implanted PLDLA-TMC containing MSCs, showed better results after 12 weeks prior grafting, due the absence of inflammatory processes, enlarged regeneration of bone tissue and facilitated angiogenesis. Notwithstanding, the 3D PLDLA-TMC itself implanted enriched tissue repair; the addition of cells known to upregulate tissue healing reinforce the perspectives for the PLDLA-TMC applications in the field of bone tissue engineering in clinical trials.

Three-dimensional printed poly (L-lactide) and hydroxyapatite composite for reconstruction of critical bone defect in rabbits.

PURPOSE: To use a 3D printed poly (L-lactide) acid (PLLA) and hydroxyapatite (HA) composite as a bone substitute for reconstruction of a critical bone defect in the radius of rabbits. METHODS: A 1.5 cm ostectomy was performed in the radial diaphysis of 60 New Zealand white rabbits. The rabbits were divided into three groups according to surgical treatment of the bone defect (group I - control, group II - bone graft, group III - 3D PLLA). Each group was divided into four subgroups with different radiographic and histopathologic evaluation times (T1 - 15 days, T2 - 30 days, T3 - 60 days, T4 - 90 days). RESULTS: The implant group had greater clinically lameness (p = 0.02), edema (p = 0.007), pain (p = 0.04) and more complications at the surgical site (p = 0.03). Histologically, this group showed greater congestion (p = 0.04), hemorrhage (p = 0.04) and inflammation. Osteogenesis was microscopically similar between days (p = 0.54) and treatments (p = 0.17), even though radiographically, more effective bone healing occurred in the graft group (II), with more callus and bone bridge formation. CONCLUSIONS: The customization of a 3D PLLA/HA scaffold was successful. However, in animals receiving the polymer-ceramic composite less bone callus and bone bridge was formed compared to the graft group.

Three-dimensional printed poly (L-lactide) and hydroxyapatite composite for reconstruction of critical bone defect in rabbits

ABSTRACT Purpose To use a 3D printed poly (L-lactide) acid (PLLA) and hydroxyapatite (HA) composite as a bone substitute for reconstruction of a critical bone defect in the radius of rabbits. Methods A 1.5 cm ostectomy was performed in the radial diaphysis of 60 New Zealand white rabbits. The rabbits were divided into three groups according to surgical treatment of the bone defect (group I - control, group II - bone graft, group III - 3D PLLA). Each group was divided into four subgroups with different radiographic and histopathologic evaluation times (T1 - 15 days, T2 - 30 days, T3 - 60 days, T4 - 90 days). Results The implant group had greater clinically lameness (p = 0.02), edema (p = 0.007), pain (p = 0.04) and more complications at the surgical site (p = 0.03). Histologically, this group showed greater congestion (p = 0.04), hemorrhage (p = 0.04) and inflammation. Osteogenesis was microscopically similar between days (p = 0.54) and treatments (p = 0.17), even though radiographically, more effective bone healing occurred in the graft group (II), with more callus and bone bridge formation. Conclusions The customization of a 3D PLLA/HA scaffold was successful. However, in animals receiving the polymer-ceramic composite less bone callus and bone bridge was formed compared to the graft group.

1,4-Dioxane removal from water and membrane fouling elimination using CuO-coated ceramic membrane coupled with ozone.

1,4-Dioxane is a synthetic cyclic ether traditionally used as a chlorinated solvent stabilizer. It is a small molecule and recalcitrant compound that is difficult to remove by conventional processes and in this regard, there is a need for the development of new technologies. In this study, an innovative CuO-coated ceramic membrane (CM) reactor system that can be used to oxidize 1,4-dioxane dissolved in surface water by catalytic ozonation was developed. The effect of the thickness of the CuO deposited on the ceramic membrane surface on the permeability, fouling resistance, 1,4-dioxane removal, and toxicity was evaluated. The efficiency of the hybrid ozonation coupled to the use of a CuO-coated CM in 1,4-dioxane removal and the antifouling properties were assessed from TOC and 1,4-dioxane removal kinetics data. Reusability in four cycles was also tested. The performance of the CuO-coated CM remained stable during the four cycles of the reusability test. The ceramic membrane coated with CuO particles coupled with ozonation is appropriate for 1,4-dioxane degradation in the aqueous phase (45% efficiency, rate constant increased by a factor of 2.98 compared with the uncoated-hybrid process) and fouling removal (60 min to recovery the permeate flux).

Treatment of aqueous solutions of 1,4-dioxane by ozonation and catalytic ozonation with copper oxide (CuO).

In this study, treatment for the removal of 1,4-dioxane by ozone and by catalytic ozonation using CuO as the catalyst was investigated. While the removal of 1,4-dioxane was small (20%) and mineralization negligible after 6 h of ozonation treatment, the removals of 1,4-dioxane and total organic carbon increased by factors of 10.35 and 81.25, respectively, after catalytic ozonation in the presence of CuO. The mineralization during catalytic ozonation was favoured at pH 10 (94.91 min-1), although it proceeded even at pH 3 (54.41 min-1). The CuO catalyst decreased the equilibrium concentration of soluble ozone and favoured its decomposition to reactive oxidative species. Radical scavenging experiments demonstrated that superoxide radicals were the main species responsible for the degradation of 1,4-dioxane. Further scavenging experiments with phosphate confirmed the presence of Lewis active sites on the surface of CuO, which were responsible for the adsorption and decomposition of ozone. The reaction mechanism proceeded through the formation of ethylene glycol diformate, which quickly hydrolyzed to ethylene glycol and formic acid as intermediate products. The stability of CuO indicated weak copper leaching and high catalytic activity for five recycling cycles. The toxicity of the water, assessed by Vibrio fischeri bioluminescence assays, remained the same (low toxicity) after catalytic ozonation while it increased after treatment with ozonation alone.

Poly(trimethylene carbonate-co-L-lactide) electrospun scaffolds for use as vascular grafts.

Currently, there is great clinical need for suitable synthetic grafts that can be used in vascular diseases. Synthetic grafts have been successfully used in medium and large arteries, however, their use in small diameter vessels is limited and presents a high failure rate. In this context, the aim of this study was to develop tissue engineering scaffolds, using poly(trimethylene carbonate-co-L-lactide) (PTMCLLA), for application as small diameter vascular grafts. For this, copolymers with varying trimethylene carbonate/lactide ratios - 20/80, 30/70, and 40/60 - were submitted to electrospinning and the resulting scaffolds were evaluated in terms of their physicochemical and biological properties. The scaffolds produced with PTMCLLA 20/80, 30/70, and 40/60 showed smooth fibers with an average diameter of 771±273, 606±242, and 697±232 nm, respectively. When the degradation ratio was evaluated, the three scaffold groups had a similar molecular weight (Mw) on the final day of analysis. PTMCLLA 30/70 and 40/60 scaffolds exhibited greater flexibility than the PTMCLLA 20/80. However, the PTMCLLA 40/60 scaffolds showed a large wrinkling and their biological properties were not evaluated. The PTMCLLA 30/70 scaffolds supported the adhesion and growth of mesenchymal stem cells (MSCs), endothelial progenitor cells, and smooth muscle cells (SMCs). In addition, they provided a spreading of MSCs and SMCs. Given the results, the electrospun scaffolds produced with PTMCLLA 30/70 copolymer can be considered promising candidates for future applications in vascular tissue engineering.

Comparative study of peritoneal adhesions after intraperitoneal implantation in rats of meshes of polypropylene versus polypropylene/polyglecaprone versus polyester/porcine collagen.

PURPOSE: To Compare the extent and intensity of adhesions formed between the intra-abdominal organs and the intraperitoneal implants of polypropylene mesh versus polypropylene/polyglecaprone versus polyester/porcine collagen used for correction of abdominal wall defect in rats. METHODS: After the defect in the abdominal wall, thirty Wistar rats were placed in three groups (ten animals each) for intraperitoneal mesh implant: polypropylene group, polypropylene/polyglecaprone group, and polyester/porcine collagen group. The macroscopic evaluation of the extent and intensity of adhesions was performed 21 days after the implant. RESULTS: The polypropylene group had a higher statistically significant impairment due to visceral adhesions (p value = 0.002) and a higher degree of intense adherence in relation to polypropylene/polyglecaprone and polyester/porcine collagen groups (p value<0.001). The polyester/porcine collagen group showed more intense adhesions than the polypropylene/polyglecaprone group (p value=0.035). CONCLUSIONS: The intraperitoneal implantation of polypropylene meshes to correct defects of the abdominal wall caused the appearance of extensive and firm adhesions to intra-abdominal structures. The use of polypropylene/polyglecaprone or polyester/porcine collagen tissue-separating meshes reduces the number and degree of adhesions formed.

Comparison between poliglecaprone and chitosan absorbable sutures in laparorrhaphy and cecorrhaphy in rabbits.

Despite improvements in the development of sutures and surgical techniques of laparorrhaphy and enterorrhaphy, complications resulting from the process of intestinal and muscular healing after simple enterorrhaphy or enteroanastomoses followed by laparorrhaphy are still frequent. The poliglecaprone 25 (PG) suture is commonly used in this type of surgical procedure due to the induction of little tissue reaction, rapid absorption by hydrolysis, and the absence of capillarity. The chitosan (CG) yarn, despite promising results in in vivo tests, is still rarely used. The objective of this study was to evaluate the use of CG in the procedures of medium laparorrhaphy and cecorrhaphy in rabbits. A total of 42 rabbits were allocated in two groups (n = 21), one referring to raffia procedures using CG and another to postoperatively PG. Macroscopic and microscopic evaluations occurred postoperatively on days 5, 15, and 25. The incidence of postoperative complications such as fibrin accumulation, granulomas, partial dehiscence of the muscular wound, and formation of adhesions was similar in the study groups. In the microscopic evaluation, abdominal muscle healing presented granulation tissue at higher intensity and lower fibrosis at 15 days postoperatively in the CG animals, as well as a greater intensity of polymorphonuclear (PMN) cells in the rabbits' cecorrhaphy area, also at 15 days when compared to PG animals. The conclusion is that the CG yarn comprises biomaterial useful to the laparorrhaphy and cecorrhaphy procedures in rabbits, representing a promising alternative for use in other species and anatomical locations. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2102-2108, 2019.

Poly(trimethylene carbonate-co-L-lactide) electrospun scaffolds for use as vascular grafts

Currently, there is great clinical need for suitable synthetic grafts that can be used in vascular diseases. Synthetic grafts have been successfully used in medium and large arteries, however, their use in small diameter vessels is limited and presents a high failure rate. In this context, the aim of this study was to develop tissue engineering scaffolds, using poly(trimethylene carbonate-co-L-lactide) (PTMCLLA), for application as small diameter vascular grafts. For this, copolymers with varying trimethylene carbonate/lactide ratios - 20/80, 30/70, and 40/60 - were submitted to electrospinning and the resulting scaffolds were evaluated in terms of their physicochemical and biological properties. The scaffolds produced with PTMCLLA 20/80, 30/70, and 40/60 showed smooth fibers with an average diameter of 771±273, 606±242, and 697±232 nm, respectively. When the degradation ratio was evaluated, the three scaffold groups had a similar molecular weight (Mw) on the final day of analysis. PTMCLLA 30/70 and 40/60 scaffolds exhibited greater flexibility than the PTMCLLA 20/80. However, the PTMCLLA 40/60 scaffolds showed a large wrinkling and their biological properties were not evaluated. The PTMCLLA 30/70 scaffolds supported the adhesion and growth of mesenchymal stem cells (MSCs), endothelial progenitor cells, and smooth muscle cells (SMCs). In addition, they provided a spreading of MSCs and SMCs. Given the results, the electrospun scaffolds produced with PTMCLLA 30/70 copolymer can be considered promising candidates for future applications in vascular tissue engineering.

Comparative study of peritoneal adhesions after intraperitoneal implantation in rats of meshes of polypropylene versus polypropylene/polyglecaprone versus polyester/porcine collagen

Abstract Purpose To Compare the extent and intensity of adhesions formed between the intra-abdominal organs and the intraperitoneal implants of polypropylene mesh versus polypropylene/polyglecaprone versus polyester/porcine collagen used for correction of abdominal wall defect in rats. Methods After the defect in the abdominal wall, thirty Wistar rats were placed in three groups (ten animals each) for intraperitoneal mesh implant: polypropylene group, polypropylene/polyglecaprone group, and polyester/porcine collagen group. The macroscopic evaluation of the extent and intensity of adhesions was performed 21 days after the implant. Results The polypropylene group had a higher statistically significant impairment due to visceral adhesions (p value = 0.002) and a higher degree of intense adherence in relation to polypropylene/polyglecaprone and polyester/porcine collagen groups (p value<0.001). The polyester/porcine collagen group showed more intense adhesions than the polypropylene/polyglecaprone group (p value=0.035). Conclusions The intraperitoneal implantation of polypropylene meshes to correct defects of the abdominal wall caused the appearance of extensive and firm adhesions to intra-abdominal structures. The use of polypropylene/polyglecaprone or polyester/porcine collagen tissue-separating meshes reduces the number and degree of adhesions formed.

Absorbable suture. Best aesthetic outcome in cesarian scar1.

PURPOSE: To compare two suture threads, poliglecaprone 25 and nylon, used as intradermal suture for skin closure in women undergoing their first cesarean section. METHODS: This is a randomized clinical trial. A total of 60 women undergoing their first cesarean section were enrolled and prospectively assessed. They were randomly allocated to group I (n=30), which received an intradermal suture with nylon 4.0 or to group II (n=30), which had an intradermal suture with poliglecaprone 25, 4.0. The main author took standardized photographs of the scar 6 months after the operation. Four independent raters, two senior obstetricians and two senior plastic surgeons (a male and a female physician from each specialty) assessed the photographs.The panelists rated the scar according to Trimbos scale, composed by the subscales hypertrophy, color and width of the scar. RESULTS: At baseline, patients in both groups were similar regarding age and body mass index. Five patients withdraw the study, four from group and one from group II. Scars of patients from group II were significantly less hypertrophic (p=0.001), thinner (p=0.019) and had more acceptable color (p=0.019). CONCLUSION: The intradermal suture with poliglecaprone 25 for skin closure after cesarean incision provides better aesthetic result.

Absorbable suture. Best aesthetic outcome in cesarian scar

Abstract Purpose: To compare two suture threads, poliglecaprone 25 and nylon, used as intradermal suture for skin closure in women undergoing their first cesarean section. Methods: This is a randomized clinical trial. A total of 60 women undergoing their first cesarean section were enrolled and prospectively assessed. They were randomly allocated to group I (n=30), which received an intradermal suture with nylon 4.0 or to group II (n=30), which had an intradermal suture with poliglecaprone 25, 4.0. The main author took standardized photographs of the scar 6 months after the operation. Four independent raters, two senior obstetricians and two senior plastic surgeons (a male and a female physician from each specialty) assessed the photographs.The panelists rated the scar according to Trimbos scale, composed by the subscales hypertrophy, color and width of the scar. Results: At baseline, patients in both groups were similar regarding age and body mass index. Five patients withdraw the study, four from group and one from group II. Scars of patients from group II were significantly less hypertrophic (p=0.001), thinner (p=0.019) and had more acceptable color (p=0.019). Conclusion: The intradermal suture with poliglecaprone 25 for skin closure after cesarean incision provides better aesthetic result.

Dual role of nitrergic neurotransmission in the bed nucleus of the stria terminalis in controlling cardiovascular responses to emotional stress in rats.

BACKGROUND AND PURPOSE: The aim of the present study was to assess the interaction of nitrergic neurotransmission within the bed nucleus of the stria terminalis (BNST) with local glutamatergic and noradrenergic neurotransmission in the control of cardiovascular responses to acute restraint stress in rats. EXPERIMENTAL APPROACH: Interaction with local noradrenergic neurotransmission was evaluated using local pretreatment with the selective α1 -adrenoceptor antagonist WB4101 before microinjection of the NO donor NOC-9 into the BNST. Interaction with glutamatergic neurotransmission was assessed by pretreating the BNST with a selective inhibitor of neuronal NOS (nNOS), Nω-propyl-L-arginine (NPLA) before local microinjection of NMDA. The effect of intra-BNST NPLA microinjection in animals locally pretreated with WB4101 was also evaluated. KEY RESULTS: NOC-9 reduced the heart rate (HR) and blood pressure increases evoked by restraint stress. These effects of NOC-9 on HR, but not in blood pressure, was inhibited by pretreatment of BNST with WB4101. NMDA enhanced the restraint-evoked HR increase, and this effect was abolished following BNST pretreatment with NPLA. Administration of NPLA to the BNST of animals pretreated locally with WB4101 decreased the HR and blood pressure increases induced by restraint. CONCLUSION AND IMPLICATIONS: These results indicate that inhibitory control of stress-evoked cardiovascular responses by nitrergic signalling in the BNST is mediated by a facilitation of local noradrenergic neurotransmission. The present data also provide evidence of an involvement of local nNOS in facilitatory control of tachycardia during stress by NMDA receptors within the BNST.

Drug-, herb- and dietary supplement-induced liver injury. / El hígado y la toxicidad por drogas, hierbas y suplementos dietéticos.

Drug- and substance-induced liver injury accounts for approximately 20% of pediatric cases of acute liver failure. It is caused by two mechanisms: direct and idiosyncratic hepatotoxicity. Direct hepatotoxicity is the result of the administration of a drug with intrinsic toxicity and is dose-dependent (e.g., acetaminophen). Idiosyncratic hepatotoxicity is unpredictable, uncommon, variable in presentation, and doseindependent. The clinical, histological, and laboratory manifestations include hepatitis, which is generally asymptomatic but with a significant increase of liver enzymes; cholestasis, accompanied with jaundice, pruritus, prominent elevation of alkaline phosphatase, and mild elevation of aminotransferases; or mixed, with elements of both hepatitis and cholestasis. Time to recovery is variable, depending on the type of liver injury. Early detection and discontinuation of the causative drug is the most effective and important step for the fast resolution of histological and clinical changes, thus reducing severe liver injury.

El daño hepático por drogas y sustancias representa, aproximadamente, el 20% de los casos de falla hepática aguda en niños. Está causada por dos mecanismos: hepatotoxicidad directa y por idiosincrasia. La primera surge de la administración de una droga con toxicidad intrínseca y es dependiente de la dosis (ejemplo: acetaminofén). La idiosincrasia es impredecible, ocurre con baja frecuencia, es variable en su presentación y no depende de la dosis. Las manifestaciones clínicas, histológicas y de laboratorio son hepatitis, en general, asintomática, con gran aumento de enzimas hepáticas; colestasis, con ictericia, prurito, aumento predominante de fosfatasa alcalina y leve aumento de aminotransferasas; o mixto, hepatitis más colestasis. El tiempo de recuperación es variable, ya que depende del tipo de daño hepático. La detección temprana y la suspensión precoz de la droga son las intervenciones más eficaces e importantes para acelerar la resolución histológica y clínica, y reducir el daño hepático grave.

TENSIOMETRIC ANALYSIS OF MESHES USED IN ABDOMINAL VENTRAL WALL DEFECTS IN RATS.

BACKGROUND: Among the various strategies to avoid exaggerated foreign body reaction in the treatment of hernias is the limitation of the amount of polypropylene or the use of absorbable material. AIM: To evaluate the healing of defects in the abdominal wall of rats, comparing microporous polypropylene, macroporous polypropylene and polypropylene/polyglecaprone at the 30º, 60º and 120º postoperative day. METHODS: Wistar rats were submitted to defect production in the ventral abdominal wall, with integrity of the parietal peritoneum. Prolene®, Ultrapro® and Bard Soft® meshes were used in the correction of the defect. Nine subgroups of 10 animals were submitted to euthanasia at 30th, 60th and 120th postoperative day. Fragments of the abdominal wall of the animals were submitted to tensiometric analysis. RESULTS: The tensiometry at the 30th postoperative day showed greater resistance of the tissues with Bard Soft® (macroporous mesh) in relation to the tissues with Prolene® (microporous mesh). On the 60th postoperative day Bard Soft® maintained the superior resistance to the tissues comparing to Prolene Mesh®. On the 120th postoperative day the tissues repaired with Ultrapro® (macroporous mesh) proved to be more resistant than the ones by Prolene® (microporous mesh) and Bard Soft® (macroporous mesh). CONCLUSION: The tissues repaired with macroporous meshes showed greater resistance than with microporous meshes at all stages, and at 120 days postoperative Ultrapro® performed better than the others.

Comparison of two different suture techniques in laparoscopic partial nephrectomy

ABSTRACT Objective: To comparatively evaluate the traditional interrupted knot-tying and running suture renorrhaphy with Monocryl® in laparoscopic partial nephrectomy (LPN). Materials and Methods: A retrospective analysis of 62 consecutive patients undergoing LPN using traditional interrupted knot-tying suture renorrhaphy (Group 1; n=31) or running suture technique renorrhaphy with 2-0 monofilament polyglecaprone (Monocryl®, Ethicon) (Group 2; n=31) from December 2011 to October 2015 at the University. All patients underwent LPN performed by an experienced laparoscopic surgeon. The demographic, perioperative and postoperative parameters were compared between the groups, and the effect of both suture techniques on the warm ischemic time (WIT) and trifecta were evaluated. Results: The running suture renorrhaphy with Monocryl® reduced WIT, estimated blood lost and length of hospitalization stay significantly without increasing postoperative complication rate during LPN in comparison with interrupted knot-tying suture. Conclusion: The renorrhaphy using the running suture with Monocryl® is an effective and safe technique with the advantage of shortening WIT even in more challenging and larger tumors during LPN.