Long-Chain Alkyl Epoxides and Glycidyl Ethers: An Underrated Class of Monomers.

Long-chain epoxides and specifically alkyl glycidyl ethers represent a class of highly hydrophobic monomers for anionic ring-opening polymerization (AROP), resulting in apolar aliphatic polyethers. In contrast, poly(ethylene glycol) is known for its high solubility in water. The combination of hydrophobic and hydrophilic monomers in block and statistical copolymerization reactions enables the synthesis of amphiphilic polyethers for a wide range of purposes, utilizing micellar interactions in aqueous solutions, e.g., viscosity enhancement of aqueous solutions, formation of supramolecular hydrogels, or for polymeric surfactants. Controlled polymerization of these highly hydrophobic long-chain epoxide monomers via different synthesis strategies, AROP, monomer-activated anionic ring-opening polymerization, catalytic polymerization, or via postmodification, enables precise control of the hydrophilic/lipophilic balance. This renders amphiphilic polymers highly interesting candidates for specialized applications, e.g., as co-surfactants in microemulsion systems. Amphiphilic polyethers based on propylene oxide and ethylene oxide, such as poloxamers are already utilized in many established applications due to the high biocompatibility of the polyether backbone. Long alkyl chain epoxides add an interesting perspective to this area and permit structural tailoring. This review gives an overview of the recent developments regarding the synthesis of amphiphilic polyethers bearing long alkyl chains and their applications.

Synthesis and antimalarial activity of quinones and structurally-related oxirane derivatives.

A series of eighteen quinones and structurally-related oxiranes were synthesized and evaluated for in vitro inhibitory activity against the chloroquine-sensitive 3D7 clone of the human malaria parasite Plasmodium falciparum. 2-amino and 2-allyloxynaphthoquinones exhibited important antiplasmodial activity (median inhibitory concentrations (IC50) < 10 µM). Oxiranes 6 and 25, prepared respectively by reaction of α-lapachone and tetrachloro-p-quinone with diazomethane in a mixture of ether and ethanol, exhibited the highest antiplasmodial activity and low cytotoxicity against human fibroblasts (MCR-5 cell line). The active compounds could represent a good prototype for an antimalarial lead molecule.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation.

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Core-shell polymer nanoparticles for prevention of GSH drug detoxification and cisplatin delivery to breast cancer cells.

Platinum drug delivery against the detoxification of cytoplasmic thiols is urgently required for achieving efficacy in breast cancer treatment that is over expressed by glutathione (GSH, thiol-oligopeptide). GSH-resistant polymer-cisplatin core-shell nanoparticles were custom designed based on biodegradable carboxylic functional polycaprolactone (PCL)-block-poly(ethylene glycol) diblock copolymers. The core of the nanoparticle was fixed as 100 carboxylic units and the shell part was varied using various molecular weight poly(ethylene glycol) monomethyl ethers (MW of PEGs = 100-5000 g mol(-1)) as initiator in the ring-opening polymerization. The complexation of cisplatin aquo species with the diblocks produced core-shell nanoparticles of 75 nm core with precise size control the particles up to 190 nm. The core-shell nanoparticles were found to be stable in saline solution and PBS and they exhibited enhanced stability with increase in the PEG shell thickness at the periphery. The hydrophobic PCL layer on the periphery of the cisplatin core behaved as a protecting layer against the cytoplasmic thiol residues (GSH and cysteine) and exhibited <5% of drug detoxification. In vitro drug-release studies revealed that the core-shell nanoparticles were ruptured upon exposure to lysosomal enzymes like esterase at the intracellular compartments. Cytotoxicity studies were performed both in normal wild-type mouse embryonic fibroblast cells (Wt-MEFs), and breast cancer (MCF-7) and cervical cancer (HeLa) cell lines. Free cisplatin and polymer drug core-shell nanoparticles showed similar cytotoxicity effects in the HeLa cells. In MCF-7 cells, the free cisplatin drug exhibited 50% cell death whereas complete cell death (100%) was accomplished by the polymer-cisplatin core-shell nanoparticles. Confocal microscopic images confirmed that the core-shell nanoparticles were taken up by the MCF-7 and HeLa cells and they were accumulated both at the cytoplasm as well at peri-nuclear environments. The present investigation lays a new foundation for the polymer-based core-shell nanoparticles approach for overcoming detoxification in platinum drugs for the treatment of GSH over-expressed breast cancer cells.

Osage Orange (Maclura pomifera L.) Seed Oil Poly(α-hydroxydibutylamine) Triglycerides: Synthesis and Characterization.

Milled Osage orange seeds (Maclura pomifera (Raf.) Schneid) were Soxhlet extracted with hexane, and portions of the extract were treated with activated carbon before solvent removal. The crude oil was winterized and degummed by centrifugation at low temperature. Decantation of the centrifugate gave an admixture of the triglycerides and free fatty acids. The free fatty acid content of the oil was removed when portions of the admixture were diluted with hexane and shaken with cold aqueous ammonium hydroxide (0.1 M) solution. The desiccant-dried organic phase was concentrated under reduced pressure to give the cleaned Osage orange triglyceride after solvent removal by rotary evaporation at 67 °C. Epoxidation of the resulting cleaned triglyceride was effected by reaction with in situ generated peroxy performic acid in H2O2. The oxirane rings of the derivatized oil were then opened using N,N-dibutylamine catalyzed by anhydrous ZnCl2 to afford the poly(α-hydroxydibutylamine) triglyceride. The purpose of this work was to derivatize and thereby stabilize this highly unsaturated tree oil for its eventual use in lubrication applications.

Optimal multi-floor plant layout based on the mathematical programming and particle swarm optimization.

In the fields of researches associated with plant layout optimization, the main goal is to minimize the costs of pipelines and pumping between connecting equipment under various constraints. However, what is the lacking of considerations in previous researches is to transform various heuristics or safety regulations into mathematical equations. For example, proper safety distances between equipments have to be complied for preventing dangerous accidents on a complex plant. Moreover, most researches have handled single-floor plant. However, many multi-floor plants have been constructed for the last decade. Therefore, the proper algorithm handling various regulations and multi-floor plant should be developed. In this study, the Mixed Integer Non-Linear Programming (MINLP) problem including safety distances, maintenance spaces, etc. is suggested based on mathematical equations. The objective function is a summation of pipeline and pumping costs. Also, various safety and maintenance issues are transformed into inequality or equality constraints. However, it is really hard to solve this problem due to complex nonlinear constraints. Thus, it is impossible to use conventional MINLP solvers using derivatives of equations. In this study, the Particle Swarm Optimization (PSO) technique is employed. The ethylene oxide plant is illustrated to verify the efficacy of this study.

Copper-catalyzed intramolecular tandem reaction of (2-halogenphenyl)(3-phenyloxiran-2-yl)methanones: synthesis of (Z)-aurones.

A convenient and efficient method for the copper-catalyzed synthesis of (Z)-aurones via intramolecular tandem reaction of (2-halogenphenyl)(3-phenyloxiran-2-yl)methanones is reported. Moreover, a plausible mechanism for the formation of (Z)-aurones is proposed. This is the first report on the synthesis of (Z)-aurones through copper-catalyzed Ullmann coupling reaction employing epoxides as substrates.

Synthesis, characterization and in vitro anti-tumoral evaluation of Erlotinib-PCEC nanoparticles.

BACKGROUND: Development of a nanosized polymeric delivery system for erlotinib was the main objective of this research. MATERIALS AND METHODS: Poly caprolactone-polyethylene glycol-polycaprolactone (PCEC) copolymers with different compositions were synthesized via ring opening polymerization. Formation of triblock copolymers was confirmed by HNMR as well as FT-IR. Erlotinib loaded nanoparticles were prepared by means of synthesized copolymers with solvent displacement method. RESULTS: Physicochemical properties of obtained polymeric nanoparticles were dependent on composition of used copolymers. Size of particles was decreased with decreasing the PCL/PEG molar ratio in used copolymers. Encapsulation efficiency of prepared formulations was declined by decreasing their particle size. Drug release behavior from the prepared nanoparticles exhibited a sustained pattern without a burst release. From the release profiles, it can be found that erlotinib release rate from polymeric nanoparticles is decreased by increase of CL/PEG molar ratio of prepared block copolymers. Based on MTT assay results, cell growth inhibition of erlotinib has a dose and time dependent pattern. After 72 hours of exposure, the 50% inhibitory concentration (IC50) of erlotinib hydrochloride was appeared to be 14.8 µM. CONCLUSIONS: From the obtained results, it can be concluded that the prepared PCEC nanoparticles in this study might have the potential to be considered as delivery system for erlotinib.

Nanohydroxyapatite incorporated electrospun polycaprolactone/polycaprolactone-polyethyleneglycol-polycaprolactone blend scaffold for bone tissue engineering applications.

The present work is a comparative evaluation of physical and biological properties of electrospun biodegradable fibrous scaffolds based on polycaprolactone (PCL) and its blend with polycaprolactone-polyethyleneglycol-polycaprolactone (CEC) with and without nanohydroxyapatite (nHAP) particles. The fiber morphology, porosity, surface wettability, and mechanical properties of electrospun PCL were distinctly influenced by the presence of both copolymer CEC and nHAP. The degradation in hydrolytic media affected both morphological and mechanical properties of the scaffolds and the tensile strength decreased by 58% for PCL, 83% for PCL/CEC, 36% for PCL/nHAP and 75% for PCL/CEC/nHAP in 90 days of PBS ageing. MTT assay using mouse fibroblast L929 cells proved all the scaffolds to be non-cytotoxic. An overall enhanced performance was shown by PCL/CEC/nHAP scaffold in cell viability (LPH) and proliferation (Picogreen). Simultaneously, ELF assay of ALP activity (bone marker) confirmed the presence of osteogenic-induced Rabbit adipose-derived mesenchymal stem cells (ADMSCs) on all the scaffolds. In comparison, the results reveal the potential of the cytocompatible PCL/CEC/nHAP scaffold for the fabrication of living bony constructs for tissue engineering applications.

A liquid-crystalline perylene tetracarboxylic bisimide derivative bearing a triethylene oxide chain and complexation of the derivative with Li cations.

A liquid-crystalline (LC) perylene tetracarboxylic bisimide (PTCBI) derivative bearing a triethylene oxide chain as well as two pentamethyldisiloxane chains was synthesized. This compound exhibits an ordered lamellar phase at room temperature, and the LC phase is retained when the sample is cooled to -100 °C. Due to the presence of extended π-conjugated perylene rings, efficient electron transport occurs in the lamellar phase and the electron mobility exceeds 1 × 10(-3) cm(2) V(-1) s(-1) at room temperature. Moreover, this PTCBI derivative can form a complex with lithium triflate because of the polar triethylene oxide chain. Lithium triflate can be mixed with it up to 3 mol%. Up to this concentration, the lamellar LC structure and the electron transport properties are not perturbed by the presence of the ionic species.

Site-selective azide incorporation into endogenous RNase A via a "chemistry" approach.

Site-selective labeling of endogenous proteins represents a major challenge in chemical biology, mainly due to the absence of unique reactive groups that can be addressed selectively. Recently, we have shown that surface-exposed lysine residues of two endogenous proteins and a peptide exhibit subtle changes in their individual reactivities. This feature allows the modification of a single residue in a highly site-selective fashion if kinetically controlled labeling conditions are applied. In order to broaden the scope of the "kinetically-controlled protein labeling" (KPL) approach and highlight additional applications, the water-soluble bioorthogonal reagent, biotin-TEO-azido-NHS (11), is developed which enables the site-selective introduction of an azido group onto endogenous proteins/peptides. This bioconjugation reagent features a biotin tag for affinity purification, an azido group for bioorthogonal labeling, a TEO (tetraethylene oxide) linker acting as a spacer and to impart water solubility and an N-hydroxysuccinimidyl (NHS) ester group for reacting with the exposed lysine residue. As a proof of concept, the native protein ribonuclease A (RNase A) bearing ten available lysine residues at the surface is furnished with a single azido group at Lys 1 in a highly site-selective fashion yielding azido-(K1)RNase A. The K1 site-selectivity is demonstrated by the combined application and interpretation of high resolution MALDI-ToF mass spectroscopy, tandem mass spectroscopy and extracted ion chromatography (XIC). Finally, the water soluble azide-reactive phosphine probe, rho-TEO-phosphine (21) (rho: rhodamine), has been designed and applied to attach a chromophore to azido-(K1)RNase A via Staudinger ligation at physiological pH indicating that the introduced azido group is accessible and could be addressed by other established azide-reactive bioorthogonal reaction schemes.

Targeting loop adenines in G-quadruplex by a selective oxirane.

Caught in the oxirane: Naphthalene diimides conjugated to a quinone methide and an oxirane have been synthesized and investigated as selective DNA G-quadruplex alkylating agents. The oxirane derivative generates a stable adduct with a G-quadruplex and shows selective alkylation of the loop adenines, as illustrated.

A copper(I)-catalyzed reaction of 2-(2-ethynylphenyl)oxirane, sulfonyl azide, with 2-isocyanoacetate.

A novel and straightforward synthetic protocol for the efficient construction of 3',5'-dihydro-1H-spiro[benzo[d]oxepine-2,4'-imidazoles] through a copper(I)-catalyzed reaction between 2-(2-ethynylphenyl)oxirane, sulfonyl azide, and 2-isocyanoacetate is described.

Structural and conformational analysis of 1-oxaspiro[2.5]octane and 1-oxa-2-azaspiro[2.5]octane derivatives by (1) H, (13) C, and (15) N NMR.

A structural and conformational analysis of 1-oxaspiro[2.5]octane and 1-oxa-2-azaspiro[2.5]octane derivatives was performed using (1) H, (13) C, and (15) N NMR spectroscopy. The relative configuration and preferred conformations were determined by analyzing the homonuclear coupling constants and chemical shifts of the protons and carbon atoms in the aliphatic rings. These parameters directly reflected the steric and electronic effects of the substituent bonded to the aliphatic six-membered ring or to C3 or N2. The parameters also were sensitive to the anisotropic positions of these atoms in the three-atom ring. The preferred orientation of the exocyclic substituents directed the oxidative attack.

Self-assembled nanotubes and helical tapes from diacetylene nonionic amphiphiles. Structural studies before and after polymerization.

We synthesized new amphiphiles comprised of a single diacetylenic chain and an oligoethylenoxide polar chain linked by an amide bond. In aqueous medium, they are not soluble at room temperature but form weak gels. Electron microscopy studies have shown that they self-assemble into helical tapes or nanotubes with lengths of several micrometers, and inner and outer diameters of 50 ± 1 and 59 ± 1 nm, respectively. The wall has a thickness of 10 ± 1 nm for both kinds of objects and has an amphiphile bilayer structure. The hydrophobic chains are ordered, and the amide groups are linked with each other by H-bonds. The dissociation of the tubes is a first-order transition with an enthalpy of ca. 40 kJ mol(-1). The nanotubes were photopolymerized to yield purple solutions consisting of helical tapes and almost flat ribbons. The polymers exhibit irreversible thermochromism upon heating.

Protein-repellent silicon nitride surfaces: UV-induced formation of oligoethylene oxide monolayers.

The grafting of polymers and oligomers of ethylene oxide onto surfaces is widely used to prevent nonspecific adsorption of biological material on sensors and membrane surfaces. In this report, we show for the first time the robust covalent attachment of short oligoethylene oxide-terminated alkenes (CH(3)O(CH(2)CH(2)O)(3)(CH(2))(11)-(CH═CH(2)) [EO(3)] and CH(3)O(CH(2)CH(2)O)(6)(CH(2))(11)-(CH═CH(2)) [EO(6)]) from the reaction of alkenes onto silicon-rich silicon nitride surfaces at room temperature using UV light. Reflectometry is used to monitor in situ the nonspecific adsorption of bovine serum albumin (BSA) and fibrinogen (FIB) onto oligoethylene oxide coated silicon-rich silicon nitride surfaces (EO(n)-Si(x)N(4), x > 3) in comparison with plasma-oxidized silicon-rich silicon nitride surfaces (SiO(y)-Si(x)N(4)) and hexadecane-coated Si(x)N(4) surfaces (C(16)-Si(x)N(4)). A significant reduction in protein adsorption on EO(n)-Si(x)N(4) surfaces was achieved, adsorption onto EO(3)-Si(x)N(4) and EO(6)-Si(x)N(4) were 0.22 mg m(-2) and 0.08 mg m(-2), respectively. The performance of the obtained EO(3) and EO(6) layers is comparable to those of similar, highly protein-repellent monolayers formed on gold and silver surfaces. EO(6)-Si(x)N(4) surfaces prevented significantly the adsorption of BSA (0.08 mg m(-2)). Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray reflectivity and static water contact angle measurements were employed to characterize the modified surfaces. In addition, the stability of EO(6)-Si(x)N(4) surfaces in phosphate-buffered saline solution (PBS) and alkaline condition (pH 10) was studied. Prolonged exposure of the surfaces to PBS solution for 1 week or alkaline condition for 2 h resulted in only minor degradation of the ethylene oxide moieties and no oxidation of the Si(x)N(4) substrates was observed. Highly stable antifouling coatings on Si(x)N(4) surfaces significantly broaden the application potential of silicon nitride-coated microdevices, and in particular of microfabricated filtration membranes.

Chondrogenic differentiation of mesenchymal stem cells embedded in a scaffold by long-term release of TGF-beta 3 complexed with chondroitin sulfate.

In this study, mesenchymal stem cells (MSCs) embedded in biodegradable and water-swollen, elastic block copolymer scaffolds were assessed for MSC chondrogenesis. To determine the optimal conditions for chondrogenesis of the embedded rMSCs, transforming growth factor-beta 3 (TGF-beta 3) was physically conjugated with chondroitin sulfate (CS) and mixed into scaffolds, which were subsequently evaluated for the differentiation of transplanted rMSCs. In determination of CS-bound growth factors for chondrogenesis, scaffold mixed with rMSCs and TGF-beta 3 was then tested by growth factor release profiles, confocal laser microscopy, RT-PCR analysis, real time-QPCR, and histology. The results of several different analyses of the transplanted rMSCs embedded in the scaffolds showed that rMSCs coupled with a CS-bound TGF-beta 3 encapsulated scaffold evidenced superior cartilage tissue formation as measured by an assay of specific gene and protein expression. Moreover, the scaffold exhibited more rapid and more distinct morphology of differentiated rMSCs than was observed with other scaffolds, as determined by histology and immunochemical histology analysis. These results indicate that the elastic block copolymer scaffolds combined with a CS-bound TGF-beta 3 should prove very suitable matrix for cell-based cartilage tissue engineering.

Dispersing carbon nanotubes by star-like water soluble C60 derivatives.

The properties of three water soluble [3:3] hexakisadducts of C60 1-3 are investigated both in bulk aqueous solutions and at air/water interface. 1-3 have a star-like molecular structure with six hydrophilic quarternary ammonium groups located terminally. 2 and 3 also have increasing number of ethylene oxide groups inserted into their peripheral hydrophilic arms. This molecular structure makes 1-3 highly water soluble, thus difficult to form aggregates in bulk aqueous solutions as revealed by transmission electron microscope observations. But surface tension measurements shows 1-3 still own some amphiphilic properties and can lower the surface tension of water. These unique C60 derivatives are also subjected to disperse carbon nanotubes (CNTs) in water for the first time. It was found the ability of each water soluble C60 derivative to disperse CNTs was mainly dominated by their amphiphilic feature as well as molecular weight.