Chemical, Thermal, Time, and Enzymatic Stability of Silk Materials with Silk I Structure.

The crystalline structure of silk fibroin Silk I is generally considered to be a metastable structure; however, there is no definite conclusion under what circumstances this crystalline structure is stable or the crystal form will change. In this study, silk fibroin solution was prepared from B. Mori silkworm cocoons, and a combined method of freeze-crystallization and freeze-drying at different temperatures was used to obtain stable Silk I crystalline material and uncrystallized silk material, respectively. Different concentrations of methanol and ethanol were used to soak the two materials with different time periods to investigate the effect of immersion treatments on the crystalline structure of silk fibroin materials. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman scattering spectroscopy (Raman), Scanning electron microscope (SEM), and Thermogravimetric analysis (TGA) were used to characterize the structure of silk fibroin before and after the treatments. The results showed that, after immersion treatments, uncrystallized silk fibroin material with random coil structure was transformed into Silk II crystal structure, while the silk material with dominated Silk I crystal structure showed good long-term stability without obvious transition to Silk II crystal structure. α-chymotrypsin biodegradation study showed that the crystalline structure of silk fibroin Silk I materials is enzymatically degradable with a much lower rate compared to uncrystallized silk materials. The crystalline structure of Silk I materials demonstrate a good long-term stability, endurance to alcohol sterilization without structural changes, and can be applied to many emerging fields, such as biomedical materials, sustainable materials, and biosensors.

Exploring the Structural Transformation Mechanism of Chinese and Thailand Silk Fibroin Fibers and Formic-Acid Fabricated Silk Films.

Silk fibroin (SF) is a protein polymer derived from insects, which has unique mechanical properties and tunable biodegradation rate due to its variable structures. Here, the variability of structural, thermal, and mechanical properties of two domesticated silk films (Chinese and Thailand B. Mori) regenerated from formic acid solution, as well as their original fibers, were compared and investigated using dynamic mechanical analysis (DMA) and Fourier transform infrared spectrometry (FTIR). Four relaxation events appeared clearly during the temperature region of 25 °C to 280 °C in DMA curves, and their disorder degree (fdis) and glass transition temperature (Tg) were predicted using Group Interaction Modeling (GIM). Compared with Thai (Thailand) regenerated silks, Chin (Chinese) silks possess a lower Tg, higher fdis, and better elasticity and mechanical strength. As the calcium chloride content in the initial processing solvent increases (1%⁻6%), the Tg of the final SF samples gradually decrease, while their fdis increase. Besides, SF with more non-crystalline structures shows high plasticity. Two α- relaxations in the glass transition region of tan δ curve were identified due to the structural transition of silk protein. These findings provide a new perspective for the design of advanced protein biomaterials with different secondary structures, and facilitate a comprehensive understanding of the structure-property relationship of various biopolymers in the future.

Recombinant Spidroins Fully Replicate Primary Mechanical Properties of Natural Spider Silk.

Despite significant efforts to engineer their heterologous production, recombinant spider silk proteins (spidroins) have yet to replicate the unparalleled combination of high strength and toughness exhibited by natural spider silks, preventing their use in numerous mechanically demanding applications. To overcome this long-standing challenge, we have developed a synthetic biology approach combining standardized DNA part assembly and split intein-mediated ligation to produce recombinant spidroins of previously unobtainable size (556 kDa), containing 192 repeat motifs of the Nephila clavipes dragline spidroin. Fibers spun from our synthetic spidroins are the first to fully replicate the mechanical performance of their natural counterparts by all common metrics, i.e., tensile strength (1.03 ± 0.11 GPa), modulus (13.7 ± 3.0 GPa), extensibility (18 ± 6%), and toughness (114 ± 51 MJ/m3). The developed process reveals a path to more dependable production of high-performance silks for mechanically demanding applications while also providing a platform to facilitate production of other high-performance natural materials.

New oral dosage form for elderly patients: preparation and characterization of silk fibroin gel.

The pharmaceutical utility of silk fibroin as a possible material for an oral dosage form for elderly patients was investigated. Silk fibroin gel (SFG) was prepared from its aqueous solution. The gel formation was studied as a function of adjusted pH and concentration of silk fibroin (SF). On the basis of Fourier transform infrared spectroscopy of SFG, the transition from the random coil to the beta-structure was observed. The rate of gelation was sufficiently accelerated by the addition of glycerol to the SF aqueous solution. The glycerol content also affected the rate of gelation of the SF solution. Rheological properties of SFG were evaluated using a creep meter. The SF content and/or glycerol content affected the breaking stress of SFG. Moisture desorption from SFG was retarded with an increase in glycerol content. It was found that SFG was able to be prepared at room temperature (20 +/- 5 degrees C), and the SF content and glycerol content affected the formation and physicochemical properties of SFG.