Fluoroacetate distribution, response to fluoridation, and synthesis in juvenile Gastrolobium bilobum plants.

Like angiosperms from several other families, the leguminous shrub Gastrolobium bilobum R.Br. produces and accumulates fluoroacetate, indicating that it performs the difficult chemistry needed to make a C-F bond. Bioinformatic analyses indicate that plants lack homologs of the only enzymes known to make a C-F bond, i.e., the Actinomycete flurorinases that form 5'-fluoro-5'-deoxyadenosine from S-adenosylmethionine and fluoride ion. To probe the origin of fluoroacetate in G. bilobum we first showed that fluoroacetate accumulates to millimolar levels in young leaves but not older leaves, stems or roots, that leaf fluoroacetate levels vary >20-fold between individual plants and are not markedly raised by sodium fluoride treatment. Young leaves were fed adenosine-13C-ribose, 13C-serine, or 13C-acetate to test plausible biosynthetic routes to fluoroacetate from S-adenosylmethionine, a C3-pyridoxal phosphate complex, or acetyl-CoA, respectively. Incorporation of 13C into expected metabolites confirmed that all three precursors were taken up and metabolized. Consistent with the bioinformatic evidence against an Actinomycete-type pathway, no adenosine-13C-ribose was converted to 13C-fluoroacetate; nor was the characteristic 4-fluorothreonine product of the Actinomycete pathway detected. Similarly, no 13C from acetate or serine was incorporated into fluoroacetate. While not fully excluding the hypothetical pathways that were tested, these negative labeling data imply that G. bilobum creates the C-F bond by an unprecedented biochemical reaction. Enzyme(s) that mediate such a reaction could be of great value in pharmaceutical and agrochemical manufacturing.

Photochemical C-F Activation Enables Defluorinative Alkylation of Trifluoroacetates and -Acetamides.

The installation of gem-difluoromethylene groups into organic structures remains a daunting synthetic challenge despite their attractive structural, physical, and biochemical properties. A very efficient retrosynthetic approach would be the functionalization of a single C-F bond from a trifluoromethyl group. Recent advances in this line of attack have enabled the C-F activation of trifluoromethylarenes, but limit the accessible motifs to only benzylic gem-difluorinated scaffolds. In contrast, the C-F activation of trifluoroacetates would enable their use as a bifunctional gem-difluoromethylene synthon. Herein, we report a photochemically mediated method for the defluorinative alkylation of a commodity feedstock: ethyl trifluoroacetate. A novel mechanistic approach was identified using our previously developed diaryl ketone HAT catalyst to enable the hydroalkylation of a diverse suite of alkenes. Furthermore, electrochemical studies revealed that more challenging radical precursors, namely trifluoroacetamides, could also be functionalized via synergistic Lewis acid/photochemical activation. Finally, this method enabled a concise synthetic approach to novel gem-difluoro analogs of FDA-approved pharmaceutical compounds.

Evaluation of Class IIa Histone Deacetylases Expression and In Vivo Epigenetic Imaging in a Transgenic Mouse Model of Alzheimer's Disease.

Epigenetic regulation by histone deacetylase (HDAC) is associated with synaptic plasticity and memory formation, and its aberrant expression has been linked to cognitive disorders, including Alzheimer's disease (AD). This study aimed to investigate the role of class IIa HDAC expression in AD and monitor it in vivo using a novel radiotracer, 6-(tri-fluoroacetamido)-1-hexanoicanilide ([18F]TFAHA). A human neural cell culture model with familial AD (FAD) mutations was established and used for in vitro assays. Positron emission tomography (PET) imaging with [18F]TFAHA was performed in a 3xTg AD mouse model for in vivo evaluation. The results showed a significant increase in HDAC4 expression in response to amyloid-ß (Aß) deposition in the cell model. Moreover, treatment with an HDAC4 selective inhibitor significantly upregulated the expression of neuronal memory-/synaptic plasticity-related genes. In [18F]TFAHA-PET imaging, whole brain or regional uptake was significantly higher in 3xTg AD mice compared with WT mice at 8 and 11 months of age. Our study demonstrated a correlation between class IIa HDACs and Aßs, the therapeutic benefit of a selective inhibitor, and the potential of using [18F]TFAHA as an epigenetic radiotracer for AD, which might facilitate the development of AD-related neuroimaging approaches and therapies.

Surface hydrophobization of pulp fibers in paper sheets via gas phase reactions.

Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac2O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters.

Stable isotope analysis of non-exchangeable hydrogen in carbohydrates derivatised with N-methyl-bis-trifluoroacetamide by gas chromatography - Chromium silver reduction/High temperature Conversion-isotope ratio mass spectrometry (GC-CrAg/HTC-IRMS).

A novel procedure for the rapid isotope analysis of the carbon-bound non-exchangeable (CBNE) hydrogen in mono and disaccharides has been developed to demonstrate the feasibility of detecting undeclared addition of exogenous sugar products in foods and beverages susceptible to economically motivated adulteration. The procedure utilizes a simple one-step reaction, with the derivatising agent N-methyl-bis-trifluoroacetamide, to substitute the exchangeable hydroxyl-hydrogens with trifluoroacetate derivatives that are sufficiently volatile to be separated and measured by a gas chromatograph coupled to an isotope ratio mass spectrometer. The conversion of the derivatised sugars into the measuring gas is achieved using a high temperature chromium-silver reactor that retains carbon, oxygen and fluorine whilst releasing hydrogen gas for stable isotope measurement. The new procedure has advantages over existing methods in terms of ease of use, analysis time and compound-specific information. Sugars from fruit juice and honey have been measured to demonstrate the feasibility of using this technique.

Effect of difluoroacetic acid and biological matrices on the development of a liquid chromatography-triple quadrupole mass spectrometry method for determination of intact growth factor proteins.

In biological systems, variable protein expression is a crucial marker for numerous diseases, including cancer. The vast majority of liquid chromatography-triple quadrupole mass spectrometry-based quantitative protein assays use bottom-up methodologies, where proteins are subjected to proteolytic cleavage prior to analysis. Here, the effect of difluoroacetic acid and biological matrices on the developement of a multiple reaction monitoring based top-down reversed-phase liquid chromatography-triple quadrupole mass spectrometry method for analysis of cancer-related intact proteins was evaluated. Seven growth factors (5.5-26.5 kDa; isoelectric points: 4.6-9.9) were analyzed on a wide-pore C4 column. The optimized method was performed at 30°C, using a 0.2 mL/min flow rate, a 10 %B/min gradient slope, and 0.05% v/v difluoroacetic acid as a mobile phase modifier. The increase of mass spectrometry sensitivity due to the difluoroacetic acid (estimated limits of detection in biological matrices 1-500 ng/mL) significantly varied for proteins with lower and higher charge state distributions. Matrix effects, as well as the specificity of the method were assessed for variable biological samples and pretreatment methods. This work demonstrates method development to improve the ability to target intact proteins directly by more affordable triple quadrupole mass spectrometry instrumentation, which could be beneficial in many application fields.

Development and Validation of a New Gas Chromatography-Tandem Mass Spectrometry Method for the Measurement of Enrichment of Glyoxylate Metabolism Analytes in Hyperoxaluria Patients Using a Stable Isotope Procedure.

Primary hyperoxalurias (PH) are inborn errors of glyoxylate metabolism characterized by an increase in endogenous oxalate production. Oxalate overproduction may cause calcium-oxalate crystal formation leading to kidney stones, nephrocalcinosis, and ultimately kidney failure. Twenty-four hour urine oxalate excretion is an inaccurate measure for endogenous oxalate production in PH patients and not applicable in those with kidney failure. Treatment efficacy cannot be assessed with this measure during clinical trials. We describe the development and validation of a gas chromatography-tandem mass spectrometry method to analyze the samples obtained following a stable isotope infusion protocol of 13C2-oxalate and 1-13C-glycolate in both healthy individuals and PH patients. Isotopic enrichments of plasma oxalate, glycolate, and glyoxylate were measured on a gas chromatography-triple quadrupole mass spectrometry system using ethylhydroxylamine and N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA) for analyte derivatization. Method precision was good for oxalate and glycolate (coefficients of variation [CV] were <6.3% and <4.2% for inter- and intraday precision, respectively) and acceptable for glyoxylate (CV <18.3% and <6.7% for inter- and intraday precision, respectively). The enrichment curves were linear over the specified range. Sensitivity was sufficient to accurately analyze enrichments. This new method allowed calculation of kinetic features of these metabolites, thus enabling a detailed analysis of the various pathways involved in glyoxylate metabolism. The method will further enhance the investigation of the metabolic PH derangements, provides a tool to accurately assess the therapeutic efficacy of new promising therapeutic interventions for PH, and could serve as a clinical tool to improve personalized therapeutic strategies.

Controlling the Cleavage of Carbon-Carbon Bonds To Generate α,α-Difluorobenzyl Carbanions for the Construction of Difluoromethylbenzenes.

Controlling the cleavage of carbon-carbon bonds during a chemical reaction is a substantial challenge; however, synthetic methods that accomplish this objective produce valuable and often unexplored reactivity. We have designed a mild process to generate α,α-difluorobenzyl carbanions in the presence of potassium carbonate by exploiting the cleavage of C-C bonds during the release of trifluoroacetate. The initiating reagent is potassium carbonate, which represents an improvement over existing protocols that require a strong base. Fragmentation studies across substituted arenes and heteroarenes were conducted along with computational analyses to elucidate reactivity trends. Furthermore, the mildly generated α,α-difluorobenzyl carbanions from electron-deficient aromatics and heteroaromatic rings can react with aldehydes to create derivatives of difluoromethylbenzenes, which are valuable synthetic targets.

Determination of human metabolites of chlorinated phosphorous flame retardants in wastewater by N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide-derivatization and gas chromatography-high resolution mass spectrometry.

The analysis of wastewater for the determination of human biomarkers of exposure (human metabolites) is a non-intrusive, economic and complementary alternative to the analysis of urine in the monitoring of human exposure to chemicals of concern. This study provides the first gas chromatography-based method for the determination of three metabolites of chlorinated organophosphorous flame retardants (OPFRs: bis(2-chloroethyl) phosphate, bis(chloropropyl) phosphate and bis(1,3-dichloro-2-propyl) phosphate) in wastewater. A solid-phase extraction procedure based on the use of mixed-mode reversed-phase weak anion exchange sorbents was optimized including a fractionated elution of OPFRs and their metabolites. Analytes derivatization was investigated by comparing two silylating reagents, N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide and N-methyl-N-(trimethylsilyl)trifluoroacetamide, the first one providing better results. Determination was performed by gas chromatography-high resolution mass spectrometry with a quadrupole-time-of-flight system (GC-QTOF) in order to improve selectivity. Furthermore, the use of GC-QTOF combined with the specific ion obtained from silylated metabolites (m/z 154.9924) can be exploited to screen for other phosphate ester metabolites. Under final conditions, the overall method performance was satisfactory, affording method detection limits ranging from 1.1 to 4.6 ng/L, percentages of recovery from 90% to 110%, and relative standard deviations below 13%. The analysis of composite raw wastewater samples collected over 24 h in the NW of Spain allowed to quantify, for the first time in this matrix, the metabolite bis(chloropropyl) phosphate at levels over 60 ng/L.

Studies on acid stability and solid-phase block synthesis of peptide-peptoid hybrids: ligands for formyl peptide receptors.

α-Peptoids as well as peptide/α-peptoid hybrids and peptide/ß-peptoid hybrids constitute major classes of proteolytically stable peptidomimetics that have been extensively investigated as mimetics of biologically active peptides. Representatives of lipidated peptide/ß-peptoid hybrids have been identified as promising immunomodulatory lead compounds, and hence access to these via protocols suitable for gram-scale synthesis is warranted to enable animal in vivo studies. Recent observations indicated that several byproducts appear in crude mixtures of relatively short benzyl-based peptide/ß-peptoid oligomers, and that these were most predominant when the ß-peptoid units displayed an α-chiral benzyl side chain. This prompted an investigation of their stability under acidic conditions. Simultaneous deprotection and cleavage of peptidomimetics containing either α-chiral α- or ß-peptoid residues required treatment with strong acid only for a short time to minimize the formation of partially debenzylated byproducts. The initial work on peptide/ß-peptoid oligomers with an alternating design established that it was beneficial to form the amide bond between the carboxyl group of the α-amino acid and the congested amino functionality of the ß-peptoid residue in solution. To further simplify oligomer assembly on solid phase, we now present a protocol for purification-free solid-phase synthesis of tetrameric building blocks. Next, syntheses of peptidomimetic ligands via manual solid-phase methodologies involving tetrameric building blocks were found to give more readily purified products as compared to those obtained with dimeric building blocks. Moreover, the tetrameric building blocks could be utilized in automated synthesis with microwave-assisted heating, albeit the purity of the crude products was not increased.

In drug-induced, immune-mediated hepatitis, interleukin-33 reduces hepatitis and improves survival independently and as a consequence of FoxP3+ T-cell activity.

Immune-mediated, drug-induced hepatitis is a rare complication of halogenated volatile anesthetic administration. IL-4-regulated Th2-polarized reactions initiate this type and other types of hepatitis, while the mechanisms that regulate the severity remain elusive. IL-33 is an innate, IL-4-inducing, Th2-polarizing cytokine that has been detected in patients with liver failure and has been associated with upregulated ST2+Foxp3+CD4+CD25+ T cells; however, roles for IL-33 in drug-induced hepatitis are unclear. We investigated IL-33 in an anesthetic, immune-mediated hepatitis modeled in BALB/c, IL-33-/- and ST2-/- mice, as well as in patients with anesthetic hepatitis. The hepatic IL-33 and ST2 levels were elevated in BALB/c mice (p < 0.05) with hepatitis, and anti-IL-33 diminished hepatitis (p < 0.05) without reducing IL-33 levels. The complete absence of IL-33 reduced IL-10 (p < 0.05) and ST2+Foxp3+CD4+CD25+ T cells (p < 0.05), as well as reduced the overall survival (p < 0.05), suggesting suppressive roles for IL-33 in anesthetic, immune-mediated hepatitis. All of the mice demonstrated similar levels of CD4+ T-cell proliferation following direct T-cell receptor stimulation, but we detected splenic IL-33 and ST2-negative Foxp3+CD4+CD25+ T cells in ST2-/- mice that developed less hepatitis than BALB/c mice (p < 0.05), suggesting that ST2-negative Foxp3+CD4+CD25+ T cells reduced hepatitis. In patients, serum IL-33 and IPEX levels were correlated in controls (r2 = 0.5, p < 0.05), similar to the levels in mice, but not in anesthetic hepatitis patients (r2 = 0.01), who had elevated IL-33 (p < 0.001) and decreased IPEX (p < 0.01). Our results suggest that, in anesthetic, immune-mediated hepatitis, IL-33 does not regulate the CD4+ T-cell proliferation that initiates hepatitis, but IL-33, likely independent of ST2, reduces hepatitis via upregulation of Foxp3+CD4+CD25+ T cells. Further studies are needed to translate the role of IL-33 to human liver disease.

Silylation of acetaminophen by trifluoroacetamide-based silylation agents.

In the presented report, we have described the silylation reaction between the amide group in acetaminophen and a two most popular trifluoroacetamide-based silylation reagents - BSTFA and MSTFA. Both reagents had a amide groups on structures. An investigation was made through the performance of a set of experiments, GC-MS analysis, and a theoretical study, namely interpretation of mass spectra, presentation of the resonance states of all the involved compounds and SN2 reaction schemes, which was found to be different when BSTFA and MSTFA was applied. The negligible effect of used solvent was also described. The fragmentation of TMS-derivatives (MS spectra) was presented and it has confirmed our previous investigations with silylation of pharmaceuticals, and a general rules of fragmentation patterns. Thanks to this the structure of di-O,O-TMS-acetaminophen was proven.

Preparation and structural characterization of regioselective 4-O/6-O-desulfated chondroitin sulfate.

The sulfation pattern plays a crucial role in chondroitin sulfate (CS) biological activity, and preparation of CS with defined structure is essential for accurate pharmacological study. In this study, we focused on the preparation of regioselective 4-O/6-O-desulfated CS derived from porcine, employing a dimethyl sulfoxide-methanol (DMSO-MeOH) method and an N-methyl-N-(trimethylsilyl) -trifluoroacetamide (MTSTFA) method CS, respectively. Results showed that the sulfate at C4 position (4-O-S) of N-acetylgalactosamine (GalNAc) was selectively removed by the DMSO-MeOH method, and the sulfate at C6 position (6-O-S) of GalNAc was selectively removed by the MTSTFA method. Structures of desulfated CS were characterized by means of FT-IR, NMR and disaccharide composition analysis. The preparations of regioselective 4-O/6-O-desulfated CS are powerful for the study of structure-activity relationship of CS.

Pushing the limits: Quantification of chromophores in real-world paper samples by GC-ECD and EI-GC-MS.

Widening the methodology of chromophore analysis in pulp and paper science, a sensitive gas-chromatographic approach with electron-capture detection is presented and applied to model samples and real-world historic paper material. Trifluoroacetic anhydride was used for derivatization of the chromophore target compounds. The derivative formation was confirmed by NMR and accurate mass analysis. The method successfully detects and quantifies hydroxyquinones which are key chromophores in cellulosic matrices. The analytical figures of merit appeared to be in an acceptable range with an LOD down to approx. 60ng/g for each key chromophore, which allows for their successful detection in historic sample material.

A highly selective and ratiometric fluorescent probe for cyanide by rationally altering the susceptible H-atom.

A highly selective and ratiometric fluorescent probe for cyanide was rationally designed and synthesized. The probe comprises a fluorophore unit of naphthalimide and a CN- acceptor of methylated trifluoroacetamide group. For these previous reported trifluoroacetamide derivative-based cyanide chemosensors, the H-atom of amide adjacent to trifluoroacetyl group is susceptible to be attacked by various anions (CN- itself, F-, AcO-, et al.) and even the solvent molecule, which resulted in the bewildered reaction mechanism and poor selectivity of the assay. In this work, the susceptible H-atom of trifluoroacetamide was artfully substituted by alkyl group. Thus a highly specific fluorescent probe was developed for cyanide sensing. Upon the nucleophilic addition of cyanide anion to the carbonyl of trifluoroacetamide moiety of the probe, the ICT process of the probe was significantly enhanced and leading to a remarkable red shift in both absorption and emission spectra of the probe. This fluorescent assay showed a linear range of 1.0-80.0µM and a LOD (limit of detection) of 0.23µM. All the investigated interference have no influence on the sensing behavior of the probe toward cyanide. Moreover, by coating on TLC plate, the probe can be utilized for practical detection of trace cyanide in water samples.

Chemometric optimization of the extraction and derivatization of parabens for their determination in water samples by rotating-disk sorptive extraction and gas chromatography mass spectrometry.

A combination of rotating disk sorptive extraction (RDSE) using Oasis® HLB as the sorbent phase and gas chromatography mass spectrometry (GC-MS) has been performed for the determination of four of the most widely used parabens: methylparaben, ethylparaben, propylparaben and n-butylparaben. The extraction and derivatization of the analytes in water samples were optimized by using factorial (screening) and Doehlert designs, thus reducing the number of analyses with the concomitant reduction of time, reagents, waste, samples and cost. Thus, a RDSE method using 20mL of sample was performed. The disk was rotated at 2900rpm for 70min at room temperature. After a desorption step and evaporation of solvent, a derivatization method using 5µL of N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) for 15min at room temperature was used previously to inject the final extract into GC-MS. The detection limits and precision (%RSD) were lower than 0.05µgL- 1 and 9.7% for the studied compounds, respectively. Recoveries were studied using effluent samples of a wastewater treatment plant (WWTP), with values higher than 80% being obtained. The applicability and reliability of this methodology were confirmed through the analysis of tap water and influents from Santiago, Chile, with concentration values ranging from 0.57 to 0.83µgL- 1 in influents. The main advantage of the present RDSE method is that it is significantly faster than its counterpart by SBSE and requires a considerable lower volume of derivatizing agent.

Analysis of diclofenac in water samples using in situ derivatization-vortex-assisted liquid-liquid microextraction with gas chromatography-mass spectrometry.

A novel micro-extraction technique for a rapid and sensitive analysis of diclofenac (DCF) in water samples has been developed. DCF was derivatized and extracted simultaneously using vortex-assisted liquid-liquid micro-extraction (VALLME) prior to gas chromatography with mass spectrometry detection. The effects of extraction solvent volume, extraction and derivatization time and ionic strength of the sample were studied using 23 factorial experimental design. The optimum extraction conditions were as follows: 200 µL of chloroform, 25 µL of N-methyl-N-trimethylsilyl-trifluoroacetamide (MSTFA) derivatization reagent, vortex extraction and derivatization time 5 min at 3000 rpm. The extraction recovery for different fortification levels was 98 %. Also, the proposed micro-extraction method exhibited results comparable with the solid phase extraction of real water samples. The proposed one-step VALLME and derivatization method is simpler and faster than the conventional extraction and derivatization methods used for the determination of DCF in real water samples.

A mild acetolysis procedure for the regioselective removal of isopropylidene in di-O-isopropylidene-protected pyranoside systems.

A mild acetolysis method for the regioselective removal of isopropylidene group from di-O-isopropylidene-protected hexopyranosides is reported. O-Isopropylidene-protected intermediates play an important role in carbohydrate chemistry, as they are often found in commercially available furanosyl and pyranosyl materials, and some of them contain more than one O-isopropylidene groups. Methods that permit regioselective removal of O-isopropylidene groups are extremely valuable, as the number of steps in the total synthesis of complex oligosaccharides could be significantly decreased. Here we report that trifluoroacetic acid (TFA)/acetic anhydride (Ac2O) can be used to regioselectively convert one of the two O-isopropylidene groups to vicinal di-O-acetates in the di-O-isopropylidene-protected galacto- and fructo-pyranosyl systems, and the reagent is compatible with some common functionalities such as sulfonate esters, bromide, azide etc.

Dispersive liquid-liquid microextraction and injection-port derivatization for the determination of free lipophilic compounds in fruit juices by gas chromatography-mass spectrometry.

A method consisting of dispersive liquid-liquid microextraction (DLLME) followed by injection-port derivatization and gas chromatography-mass spectrometry (GC-MS) for the analysis of free lipophilic compounds in fruit juices is described. The method allows the analysis of several classes of lipophilic compounds, such as fatty acids, fatty alcohols, phytosterols and triterpenes. The chromatographic separation of the compounds was achieved in a chromatographic run of 25.5min. The best conditions for the dispersive liquid-liquid microextraction were 100µL of CHCl3 in 1mL of acetone. For the injection-port derivatization, the best conditions were at 280°C, 1min purge-off, and a 1:1 sample:derivatization reagent ratio (v/v) using N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA):pyridine (1:1) as reagent. Quality parameters were assessed for the target compounds, giving a limits of detection (LODs) ranging from 1.1 to 5.7ng/mL and limits of quantification (LOQs) from 3.4 to 18.7ng/mL for linoleic and stearic acid, respectively. Repeatability (%RSD, n=5) was below 11.51% in all cases. In addition, the method linearity presented an r2 ≥0.990 for all ranges applied. Finally, the method was used to test the lipophilic fraction of various samples of commercial fruit juice.

Investigation of the derivatization conditions for GC-MS metabolomics of biological samples.

AIM: Metabolomics applications represent an emerging field where significant efforts are directed. Derivatization consists prerequisite for GC-MS metabolomics analysis. METHODS: Common silylation agents were tested for the derivatization of blood plasma. Optimization of methoxyamination and silylation reactions was performed on a mixture of reference standards, consisting of 46 different metabolites. Stability of derivatized metabolites was tested at 4°C. RESULTS: Optimum results were achieved using N-methyl-N-(trimethylsilyl)trifluoroacetamide. Methoxyamination at room temperature for 24 h followed by 2-h silylation at high temperature lead to efficient derivatization. CONCLUSION: Formation and stability of derivatives among metabolites differ greatly, so derivatization should be studied before application in metabolomics studies.