New organic/inorganic nanohybrids of targeted pullulan derivative/gold nanoparticles for effective drug delivery systems.

This study aimed to develop new organic/inorganic nanohybrids of targeted pullulan derivative/gold nanoparticles (FA-PABA-Q188-PUL@AuNPs) to improve the selectivity and efficacy of drugs. The chemical structure of targeted pullulan derivative, folic acid-decorated para-aminobenzoic acid-quat188-pullulan (FA-PABA-Q188-PUL), was designed for reducing, stabilizing, capping, and functionalizing AuNPs. Here, the key factors, including pH, temperature, and FA-PABA-Q188-PUL concentrations, were systematically optimized to control the morphology, size, and functionalization of multifunctional FA-PABA-Q188-PUL@AuNPs. Spherical FA-PABA-Q188-PUL@AuNPs obtained by a green, simple, and bio-inspired strategy under the optimum conditions were thoroughly characterized and had an average size of 12.6 ± 1.5 nm. The anticancer drug DOX was successfully loaded on monodispersed FA-PABA-Q188-PUL@AuNPs and the system exhibited excellent intracellular uptake, specificity, and physicochemical properties. The pH-responsive DOX release from FA-PABA-Q188-PUL@AuNPs-DOX showed fast release (85% after 72 h) under acidic conditions. Furthermore, FA-PABA-Q188-PUL@AuNPs-DOX enhanced the anticancer activity of DOX toward Chago-k1 cancer cells up to 4.8-fold and showed less cytotoxicity toward normal cells than free DOX. The FA-PABA-Q188-PUL@AuNPs-DOX induced the death of cells by increasing late apoptotic cells (26.4%) and arresting the cell cycle at S-G2/M phases. These results showed that innovative FA-PABA-Q188-PUL@AuNPs should be considered as new candidate platforms for anticancer drug delivery systems.

Continuous manufacturing of orally dissolving webs containing a poorly soluble drug via electrospinning.

An orally dissolving web (ODW) formulation of poorly soluble carvedilol (CAR) was developed and manufactured continuously using electrospinning (ES) as a key technology. Phase solubility tests revealed that hydroxypropyl-ß-cyclodextrin (HPßCD) solubilizer alone cannot ensure sufficient solubility (6.25 mg CAR in 20 mL) in the oral cavity even if citric acid was present to ionize the basic drug. In turn, electrospun amorphous nanofibers of polyvinylpyrrolidone K30 (PVPK30) and CAR exhibited notable supersaturation of the drug in the presence of citric acid. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) confirmed the amorphous state of CAR. The final ODW was prepared by layering the nanofibers onto pullulan, a well-soluble polysaccharide film carrying citric acid. The double-layered formulation showed ultrafast disintegration and dissolution modeling the oral cavity meeting regulatory requirements (<30 s). The continuous production was accomplished using our recently developed continuous model system by controlled deposition of the nanofibers onto the carrier film strained to a wheel collector and followed by cutting into final dosage units. Performance tests of the continuous system revealed satisfactory content uniformity over time (average acceptance value = 9.45), while residual solvent content measurements showed trace amounts of ethanol (EtOH) after production and acceptable dimethyl-formamide (DMF) content with secondary drying at room temperature. The presented work demonstrates how ES can be part of a continuous manufacturing system as an advanced drying tool during the formulation of challenging drugs.

In vitro and in vivo evaluation of pirfenidone loaded acrylamide grafted pullulan-poly(vinyl alcohol) interpenetrating polymer networks.

The aim of present study was to develop controlled release formulation of pirfenidone using acrylamide grafted pullulan. Interpenetrating polymer network (IPN) microspheres were prepared using acrylamide grafted pullulan and PVA utilizing glutaraldehyde assisted water-in-oil emulsion crosslinking method. IPN microspheres were characterized by FTIR, solid state 13C NMR and XRD spectroscopy. In vitro enzymatic degradation study showed 34.30% degradation after 24 h with degradation rate constant of 0.0088 min-1. In vitro biocompatibility test showed no changes in cellular morphology and cell adherence to microspheres, indicating its biocompatible nature. The release exponent value of all formulations was less than 0.45, indicating the release mechanism to be Fickian diffusion. Finally, in vivo pharmacokinetic study showed longer Tmax (1.16 h) and greater AUC value (10037.76 ng h/mL,) as compared to Pirfenex® (Tmax = 0.5 h; AUC = 4310.45 ng h/mL,). The results indicated that the prepared formulation could successfully control the drug release for prolonged time period.

Influence of degree of substitution and folic acid coinitiator on pullulan-HEMA hydrogel properties crosslinked under visible-light initiating system.

Hydroxyethyl methacrylate-derivative pullulan (pullulan-HEMA) was synthesized by activation of HEMA followed by catalyzed reaction for adjusting the degree of substitution (DS) of copolymer. Pullulan-HEMA was photocrosslinked using new three-components photoinitiating system composed of carboxylated camphorquinone-folic acid-iodonium salt under visible light. Folic acid was employed as new coinitiator for improving the entire hydrogel properties and avoiding harms of traditional used tertiary amine coinitiators. Pullulan-HEMA hydrogels were characterized by swelling, crosslinking density, and degree of conversion. It was observed that the increase of crosslinking density, Tg, degree of conversion are owing to increasing the DS of copolymer. However, water uptake of hydrogel decreased with increasing the DS value and folic acid concentrations, owing to increasing the crosslinking densities of hydrogels. Also, increasing DS of copolymer and folic acid improved sharply hydrogel surface morphology and prolonged the required time for enzymatic degradation. Notably, the alteration in DS of copolymer converted the in vitro release profile of dexamethasone from rapid and big burst release into sustained and low release behavior. Meanwhile, we could obtain progressive and tunable storage modulus ranged ca. 2.0-10 KPa when DS of copolymer was altered from 0.025 to 0.086, showing that pullulan-HEMA hydrogels are promising biomaterial candidate for biomedical applications.

Thermoresponsive polysaccharide-based composite hydrogel with antibacterial and healing-promoting activities for preventing recurrent adhesion after adhesiolysis.

Postoperative adhesions are very common complications after general abdominal surgery. Although adhesiolysis has been proven effective in eliminating the preexisting adhesions, the new trauma caused by surgical lysis can induce recurrent adhesion. The prevention of recurrent adhesion after adhesiolysis is more difficult because the injury is more severe and adhesion mechanism is more complicated compared with the primary adhesion. In this study, a thermoresponsive hydrogel contained galactose modified xyloglucan (mXG) and hydroxybutyl chitosan (HBC) was developed as a barrier device for recurrent adhesion prevention after adhesiolysis due to its injectability and spontaneous gelling behaviors at the body temperature without any chemical reactions or extra driving factors. First, mXG and HBC were synthesized via enzymatic modification and etherification reaction, respectively. Rheological measurements indicated that the mXG/HBC composite system showed excellent thermosensitivity properties, and their gelation temperature and time can be modulated via adjusting the mXG/HBC ratio. Moreover, the mXG/HBC hydrogel exhibited excellent cytocompatibility and hemocompatibility in vitro. Furthermore, the mXG/HBC hydrogel could promote wound healing in the rat skin wound model. Finally, the efficacy of the mXG/HBC composite hydrogel in the prevention of recurrent adhesion was evaluated in a more rigorous rat repeated-injury adhesion model. The results demonstrated that the composite hydrogel could not only effectively prevent recurrent adhesion after adhesiolysis, but also promote wound healing and reduce scare formation. These results suggested that the mXG/HBC composite hydrogel may be a promising candidate as an injectable anti-adhesion system for clinical applications. STATEMENT OF SIGNIFICANCE: Although adhesiolysis has been proven effective in eliminating the preexisting adhesions, the new trauma caused by surgical lysis can induce recurrent adhesion. So far, most of the existing barrier systems and pharmacological approaches were developed for primary adhesion prevention while few attention has paid on prevention of recurrent adhesion after adhesiolysis. In the present study, we developed a thermoresponsive polysaccharide-based composite hydrogel by simple mixing galactose modified xyloglucan (mXG) and hydroxybutyl chitosan (HBC). The resulting mXG/HBC composite hydrogel not only was easy to handle and highly effective in preventing the recurrent adhesion after adhesiolysis, but also could promote wound healing and reduce scare formation. Our study provide an effective anti-adhesion system for preventing recurrent adhesion after adhesiolysis.

A randomized, controlled trial evaluating the efficacy and safety of BTH1677 in combination with bevacizumab, carboplatin, and paclitaxel in first-line treatment of advanced non-small cell lung cancer.

BACKGROUND: BTH1677, a beta-glucan pathogen-associated molecular pattern molecule, drives an anti-cancer immune response in combination with oncology antibody therapies. This phase II study explored the efficacy, pharmacokinetics (PK), and safety of BTH1677 combined with bevacizumab/carboplatin/paclitaxel in patients with untreated advanced non-small cell lung cancer (NSCLC). METHODS: Patients were randomized to the BTH1677 arm (N = 61; intravenous [IV] BTH1677, 4 mg/kg, weekly; IV bevacizumab, 15 mg/kg, once each 3-week cycle [Q3W]; IV carboplatin, 6 mg/mL/min Calvert formula area-under-the-curve, Q3W; and IV paclitaxel, 200 mg/m2, Q3W) or Control arm (N = 31; bevacizumab/carboplatin/paclitaxel as above). Carboplatin/paclitaxel was discontinued after 4-6 cycles and patients who responded or remained stable received maintenance therapy with BTH1677/bevacizumab (BTH1677 arm) or bevacizumab (Control arm). Efficacy assessments, based on blinded central radiology review, included objective response rate (ORR; primary endpoint), disease control rate, duration of objective response, and progression-free survival. Overall survival and adverse events (AEs) were also assessed. RESULTS: ORR was higher in the BTH1677 vs Control arm but the difference between groups was not statistically significant (60.4% vs 43.5%; P = .2096). All other clinical endpoints also favored the BTH1677 arm but none statistically differed between arms. PK was consistent with previous studies. Although a higher incidence of Grade 3/4 AEs occurred in the BTH1677 vs Control arm (93.2% vs 66.7%), no unexpected AEs were observed. Serious AEs and discontinuations due to AEs were lower in the BTH1677 vs Control arm. CONCLUSIONS: Improvements in tumor assessments and survival were observed with BTH1677/bevacizumab/carboplatin/paclitaxel compared with control treatment in patients with advanced NSCLC. TRIAL REGISTRATION: ClinicalTrials.gov registration ID: NCT00874107 . Registered 2 April 2009. First participant was enrolled on 29 September 2009.

A randomized, open-label, multicenter, phase II study evaluating the efficacy and safety of BTH1677 (1,3-1,6 beta glucan; Imprime PGG) in combination with cetuximab and chemotherapy in patients with advanced non-small cell lung cancer.

Introduction BTH1677, a 1,3-1,6 beta-glucan immunomodulator, stimulates a coordinated anti-cancer immune response in combination with anti-tumor antibody therapies. This phase II study explored the efficacy, pharmacokinetics (PK), and safety of BTH1677 combined with cetuximab/carboplatin/paclitaxel in untreated stage IIIB/IV non-small cell lung cancer (NSCLC) patients. Methods Patients were randomized 2:1 to the BTH1677 arm (N=60; BTH1677, 4 mg/kg, weekly; cetuximab, initial dose 400 mg/m2 and subsequent doses 250 mg/m2, weekly; carboplatin, 6 mg/mL/min AUC (area-under-the-curve) by Calvert formula, once each 3-week cycle [Q3W]); and paclitaxel, 200 mg/m2, Q3W) or Control arm (N=30; cetuximab/carboplatin/paclitaxel as above). Carboplatin/paclitaxel was discontinued after 4-6 cycles; patients who responded or remained stable received maintenance therapy with BTH1677/cetuximab (BTH1677 arm) or cetuximab (Control arm). Investigator and blinded central radiology reviews were conducted. Efficacy assessments included objective response rate (ORR; primary endpoint), disease control rate, duration of objective response, time-to-progression and overall survival (OS); safety was assessed by adverse events (AEs). Potential biomarker analysis for BTH1677 response was also conducted. Results Compared to control treatment, the addition of BTH1677 numerically increased ORR by both investigator (47.8% vs 23.1%; p=0.0468) and central (36.6% vs 23.1%; p=0.2895) reviews. No other endpoints differed between arms. PK was consistent with previous studies. BTH1677 was well tolerated, with AEs expected of the backbone therapy predominating. Biomarker-positive patients displayed better ORR and OS than negative patients. Conclusions BTH1677 combined with cetuximab/carboplatin/paclitaxel was well tolerated and improved ORR as first-line treatment in patients with advanced NSCLC. Future patient selection by biomarker status may further improve efficacy ClinicalTrials.gov Identifier: NCT00874848.

In Vitro and In Vivo Performance of Novel Spray Dried Andrographolide Loaded Scleroglucan Based Formulation for Dry Powder Inhaler.

BACKGROUND: Current therapy for pulmonary arterial hypertension (PAH) is unable to prevent progression of disease due to continuous infusions and multiple oral administrations. This resulted in the need of novel treatment which would target directly structural vascular changes that weaken blood flow through pulmonary circulation. OBJECTIVE: The objective of present study was to develop spray dried (SD) formulation for dry powder inhaler (DPI) with enhanced aerosol performance and lung deposition by using novel bioactive, andrographolide (AGP) and carrier, scleroglucan (SCLG) with improved antihypertensive activity. The SDAGP formulation was evaluated for physicochemical properties and in vitro/in vivo lung deposition. Further, antihypertensive activity was studied by monocrotaline (MCT) induced rat model. RESULTS: The SDAGP exhibited mean median aerodynamic diameter (MMAD) and fine particle fraction (FPF) of 3.37 ± 0.47 µm and 60.24 ± 0.98%. The in vivo absorption profile of final formulation reflected increased lung deposition of AGP at the end of 24 h with no signs of inflammation and toxicity. Moreover, SDAGP formulation confirmed enhanced antihypertensive activity. CONCLUSION: The results proved use of AGP and SCLG as a novel bioactive and carrier with enhanced lung deposition and pulmonary antihypertensive activity.

Temporal control of xyloglucan self-assembly into layered structures by radiation-induced degradation.

Partially degalactosylated xyloglucan from tamarind seeds (Deg-XG) is a very appealing biopolymer for the production of in situ gelling systems at physiological temperature. In this work, we observe that the morphology of hydrogels evolves towards high degrees of structural organization with time, yielding to dense stacks of thin membranes within 24h of incubation at 37°C. We also explore the possibility offered by gamma irradiation of controlling the time scale of this phenomenon, the final morphology and mechanical properties of the system. Structural and molecular modifications of Deg-XG with dose are investigated by FTIR, dynamic light scattering (DLS) and rotational viscosimetry. The impact on gelation ability and gel strength is studied by rheological analysis. The morphology evolution is investigated by SEM analysis, and absence of cytotoxicity verified by MTS assay and optical microscopy of neuroblastoma cells.

Protective effect of carboxytmethylpachymaran on TNF-α-induced damage in Caco-2 cell monolayers.

This study was carried out to study the protective effect of carboxytmethylpachymaran (CMP) on TNF-α-induced intestinal epithelial barrier dysfunction in Caco-2 cell monolayers and the underlying mechanism. The Caco-2 cell monolayers were pretreated with 50, 100 or 150µg/mL CMP for 72h, and then they were exposed to 100ng/mL tumor necrosis factor alpha (TNF-α) for 72h. The results showed that CMP alleviated the drop of trans-epithelial electrical resistance (TEER) and the increase of phenol red flux induced by TNF-α. CMP also ameliorated TNF-α-induced decrease of mRNA/protein expression and distribution of Occludin and ZO-3 which were chosen as makers of tight junction (TJ). Additionally, the increased protein expressions of MLCK, phosphorylation level of myosin light chain (p-MLC), NF-κB p-P65 and p-IκBα induced by TNF-α were significantly inhibited by CMP. This study demonstrates the protective effect of CMP on TNF-α-induced damage of intestinal epithelial barrier in Caco-2 monolayers and discovers that the suppression of MLCK-p-MLC signaling regulated by NF-κB might be one of the mechanisms underlying the protective effect of CMP.

Two randomized, double-blind, placebo-controlled, dose-escalation phase 1 studies evaluating BTH1677, a 1, 3-1,6 beta glucan pathogen associated molecular pattern, in healthy volunteer subjects.

BACKGROUND: BTH1677 is a beta glucan pathogen associated molecular pattern (PAMP) currently being investigated as a novel cancer therapy. Here, the initial safety and pharmacokinetic (PK) results of BTH1677 in healthy subjects are reported. SUBJECTS AND METHODS: In the Phase 1a single-dosing study, subjects were randomized (3:1 per cohort) to a single intravenous (i.v.) infusion of BTH1677 at 0.5, 1, 2, 4, or 6 mg/kg or placebo, respectively. In the Phase 1b multi-dosing study, subjects were randomized (3:1 per cohort) to 7 daily i.v. infusions of BTH1677 at 1, 2, or 4 mg/kg or placebo, respectively. Safety and PK non-compartmental analyses were performed. RESULTS: Thirty-six subjects (N = 24 Phase 1a; N = 12 Phase 1b) were randomized to treatment. No deaths or serious adverse events occurred in either study. Mild or moderate adverse events (AEs) occurred in 67% of BTH1677-treated subjects in both studies. Treatment-related AEs (occurring in ≥10% of subjects) included dyspnea, flushing, headache, nausea, paraesthesia, and rash in Phase 1a and conjunctivitis and headache in Phase 1b. BTH1677 serum concentration was linear with dose. Clearance, serum elimination half-life (t1/2) and volume of distribution (Vss) were BTH1677 dose-independent. In Phase 1b, area under the curve, t1/2, and Vss values were larger at steady state on days 6-30 versus day 0. CONCLUSIONS: BTH1677 was well tolerated after single doses up to 6 mg/kg and after 7 daily doses up to 4 mg/kg.

Enhanced conjugation stability and blood circulation time of macromolecular gadolinium-DTPA contrast agent.

In this study, we prepared macromolecular MR T1 contrast agent: pullulan-conjugated Gd diethylene triamine pentaacetate (Gd-DTPA-Pullulan) and estimated residual free Gd(3+), chelation stability in competition with metal ions, plasma and tissue pharmacokinetics, and abdominal MR contrast on rats. Residual free Gd(3+) in Gd-DTPA-Pullulan was measured using colorimetric spectroscopy. The transmetalation of Gd(3+) incubated with Ca(2+) was performed by using a dialysis membrane (MWCO 100-500 Da) and investigated by ICP-OES. The plasma concentration profiles of Gd-DTPA-Pullulan were estimated after intravenous injection at a dose 0.1 mmol/kg of Gd. The coronal-plane abdominal images of normal rats were observed by MR imaging. The content of free Gd(3+), the toxic residual form, was less than 0.01%. Chelation stability of Gd-DTPA-Pullulan was estimated, and only 0.2% and 0.00045% of Gd(3+) were released from Gd-DTPA-Pullulan after 2h incubation with Ca(2+) and Fe(2+), respectively. Gd-DTPA-Pullulan displayed the extended plasma half-life (t1/2,α=0.43 h, t1/2,ß=2.32 h), much longer than 0.11h and 0.79 h of Gd-EOB-DTPA. Abdominal MR imaging showed Gd-DTPA-Pullulan maintained initial MR contrast for 30 min. The extended plasma half-life of Gd-DTPA-Pullulan probably allows the prolonged MR acquisition time in clinic with enhanced MR contrast.

Development of chitosan-pullulan composite nanoparticles for nasal delivery of vaccines: optimisation and cellular studies.

Nasal immunisation with nanoparticles has already shown promising results. In this study, nanoparticle composites carrying BSA for nasal vaccination prepared using electrostatic interaction process between polycation N-trimethyl chitosan chloride (TMC), chitosan glutamate (CG), chitosan chloride (CCl) and polyanion carboxymethyl pullulan (CMP). A mass ratio of 2:1 for TMC-CMP combination produced stable nanocarriers. For CCl-CMP and CG-CMP formulations needed a mass ratio of 3:1. Loading efficiency was >90% for all formulations. Nanoparticles' size ranged from 207 to 603 nm. The surface charge of the complexes varied between +14 and +33 mV. SDS-PAGE integrity of the model antigen was also demonstrated. MTT studies showed that nanoparticle composites were less toxic to Calu-3 cells than the particles of cationic polymers alone. FITC-BSA loaded nanoparticles efficiently taken up by J774A.1 macrophages as confirmed by confocal microscopy highlighting the potential of these novel nanoparticulate carriers' use for nasal vaccination.

Specifically targeted delivery of protein to phagocytic macrophages.

Macrophages play important roles in the pathogenesis of various diseases, and are important potential therapeutic targets. Furthermore, macrophages are key antigen-presenting cells and important in vaccine design. In this study, we report on the novel formulation (bovine serum albumin [BSA]-loaded glucan particles [GMP-BSA]) based on ß-glucan particles from cell walls of baker's yeast for the targeted delivery of protein to macrophages. Using this formulation, chitosan, tripolyphosphate, and alginate were used to fabricate colloidal particles with the model protein BSA via electrostatic interactions, which were caged and incorporated BSA very tightly within the ß-glucan particle shells. The prepared GMP-BSA exhibited good protein-release behavior and avoided protein leakage. The particles were also highly specific to phagocytic macrophages, such as Raw 264.7 cells, primary bone marrow-derived macrophages, and peritoneal exudate macrophages, whereas the particles were not taken up by nonphagocytic cells, including NIH3T3, AD293, HeLa, and Caco-2. We hypothesize that these tightly encapsulated protein-loaded glucan particles deliver various types of proteins to macrophages with notably high selectivity, and may have broad applications in targeted drug delivery or vaccine design against macrophages.

Long-term evaluation of bulking agents for the treatment of fecal incontinence: clinical outcomes and ultrasound evidence.

BACKGROUND: The injection of bulking agents into the anal canal has been reported to help patients with fecal incontinence. Although it has been advocated as a safe and effective option, substantial data concerning long-term efficacy are still lacking, and the resorption process of the implants has not yet been carefully studied. The aim of our study was to investigate the long-term outcomes of bulking agents for the treatment of fecal incontinence and the behavior of implanted materials in the anorectum. METHODS: At a median follow-up of 7 years, 19 patients with idiopathic fecal incontinence who had received bulking agent implants were evaluated. Clinical, manometric and ultrasound assessments were carried out. RESULTS: The clinical improvements that were achieved in the short term were not maintained over time. For each patient, the number of implants that could no longer be identified on ultrasound was significantly correlated with poorer clinical long-term outcomes. On average, only 14% of the originally injected volume was still detectable. CONCLUSIONS: In the long term, perianally injected bulking agents seem to lose effectiveness. The ultrasound assessment suggests that the process of resorption is almost complete, and the implants are no longer effective in treating incontinence.

Characterization of freeze-dried gallic acid/xyloglucan.

BACKGROUND: Tamarind seed xyloglucan (TSX) is generally used for drug delivery systems. Gallic acid (GA) possesses various pharmacological activities. It has a good solubility and bioavailability but short half-life. PURPOSE: To prepare a sustained-release of GA to overcome its relatively short half-life. GA was blended with TSX and freeze-dried. The physicochemical properties of freeze-dried GA and freeze-dried GA/TSX were characterized, and the release profiles of GA from these freeze-dried samples were investigated. METHOD: All freeze-dried samples were characterized by PXRD, spectroscopic and thermal analyses. The dissolution studies were performed according to the United States Pharmacopeia (USP) XXX. RESULTS: According to FTIR, FT-Raman and (13)C CP/MAS NMR, the spectra of freeze-dried GA were similar to that of the anhydrous form. Nevertheless, DRIFTS and DSC were able to differentiate these two forms. The crystallinity of GA in the freeze-dried GA/TSX was the same as that of the freeze-dried GA. DSC indicates that there were interactions between GA and TSX. It was of interest that a freeze-dried sample with low amount of GA, 0.2% GA/1% TSX was mostly in an amorphous form. Moreover, all freeze-dried GA/TSX preparations demonstrated a sustained-release of GA compared to GA alone. The freeze-dried 1% GA/1% TSX provided the best sustained-release of GA of up to 240 min. CONCLUSIONS: TSX could change a crystal form of a small molecule to a mostly amorphous form. It was of importance that the freeze-dried GA/TSX could effectively retard the release of GA. These samples may be able to overcome the limitation for the therapeutic use of GA due to its short biological half-life.

Imaging of the peritoneum evaluated by 99mTc-icodextrin scintigraphy in peritoneal dialysis patients: preliminary data.

AIM: In this study, we proposed a peritoneal scintigraphy with a different marker, the 99mTechnetium-Icodextrin, to evaluate the distribution of the dialysate within the peritoneal cavity in peritoneal dialysis (PD) patients. METHODS: 99mTc-Icodextrin scintigraphy was performed in 16 PD patients. 0.5 ml of 7.5% Icodextrin solution was labeled with 74 megabecquerel (MBq) of 99mTc and then added to 2,000 ml of dialysate solution (2.5% dextrose). The peritoneum scintigraphy was performed by a SPECT gamma camera with the peritoneal cavity filled and after the complete drainage of the radio compound-dialysate mixture. The images were reviewed for evidence of peritoneal leaks, hernias, loculated fluid collections, and peritoneal membrane adhesions. RESULTS: Abnormal findings were detected by 99mTc-Icodextrin scintigraphy in 4 (25%) out of 16 patients and included retroperitoneal (n = 1), diaphragmatic (n = 1) and inguinal (n = 1) leakages and peritoneal membrane adhesions (n = 1). CONCLUSIONS: Peritoneum scintigraphy with 99mTc-Icodextrin is a useful method to detect some complications occurring during peritoneal dialysis; it offers excellent imaging to assess these complications.

Cellular uptake mechanism and intracellular fate of hydrophobically modified pullulan nanoparticles.

The cellular uptake mechanism and intracellular fate of self-assembled nanoparticles (NPs) of cholesterol-modified pullulan (CHSP) by human hepatocellular carcinoma (HepG2) cells were investigated. Covalent conjugation with fluorescein isothiocyanate (FITC) yielded stably labeled CHSP (FITC-CHSP), which was successfully formulated into NPs (mean particle size 63.0 ± 1.9 nm) by dialysis. A cytotoxicity assay clearly indicated that the CHSP NPs did not show significant toxicity in HepG2 cells. The effects of NP concentration, incubation time, and temperature on the cellular uptake of the NPs were systematically evaluated by fluorometry, and the results suggested that cellular uptake of the NPs was concentration-,time-, and temperature-dependent. In vitro experiments with endocytic inhibitors revealed that clathrin-mediated endocytosis and macropinocytosis were involved in the internalization of CHSP NPs. The intracellular trafficking study demonstrated that CHSP NPs were entrapped in the lysosomes at 1 hour after incubation; colocalization of NPs with either the Golgi apparatus or the endoplasmic reticula was not observed during the entire course of the study. These results suggested that the CHSP NPs may serve as a versatile carrier for intracellular delivery of therapeutic agents.

Ultrafiltration characteristics of glucose polymers with low polydispersity.

BACKGROUND: Icodextrin, a glucose polymer with a polydispersity [ratio of weight-average molecular weight (Mw) to number-average molecular weight] of approximately 2.6, has been shown, compared with glucose, to provide superior ultrafiltration (UF) efficiency [ratio of UF to carbohydrate (CHO) absorbed] when used as an osmotic agent during a long-dwell peritoneal dialysis exchange. In an experimental rabbit model, we evaluated the effect of Mw on the UF and UF efficiency of glucose polymers with low polydispersity. METHODS: A crossover trial in female New Zealand White rabbits (2.20 - 2.65 kg) with surgically implanted peritoneal catheters evaluated two glucose polymers at nominal concentrations of 7.5 g/dL: a 6K polymer (Mw: 6.4 kDa; polydispersity: 2.3) and a 19K polymer (Mw: 18.8 kDa; polydispersity: 2.0). Rabbits were randomized to receive either the 6K (n = 11) or the 19K (n = 12) solution during the first exchange (40 mL/kg body weight). The alternative solution was evaluated in a second exchange 3 days later. During each 4-hour dwell, the UF and total glucose polymer CHO absorbed were determined. RESULTS: The UF was higher for the 6K (p < 0.0001) than for the 19K polymer (mean ± standard deviation: 73.6 ± 30.8 mL vs. 43.0 ± 20.2 mL), as was the amount of CHO absorbed (42.5% ± 9.8% vs. 35.7% ± 11.0%, p = 0.021). In spite of higher CHO absorption, an approximately 50% higher (p = 0.029) UF efficiency was achieved with the 6K polymer (28.3 ± 18.8 mL/g) than with the 19K polymer (19.0 ± 11.3 mL/g). The results were independent of the order of the experimental exchanges. CONCLUSIONS: Glucose polymers with low polydispersity are effective osmotic agents in a rabbit model. The low-Mw polymer was more effective at generating UF and had a higher UF efficiency, but those results came at the expense of the polymer being more readily absorbed from the peritoneal cavity.