Using your head - cranial steering in pterosaurs.

The vast majority of pterosaurs are characterized by relatively large, elongate heads that are often adorned with large, elaborate crests. Projecting out in front of the body, these large heads and any crests must have had an aerodynamic effect. The working hypothesis of the present study is that these oversized heads were used to control the left-right motions of the body during flight. Using digital models of eight non-pterodactyloids ("rhamphorhyncoids") and ten pterodactyloids, the turning moments associated with the head + neck show a close and consistent correspondence with the rotational inertia of the whole body about a vertical axis in both groups, supporting the idea of a functional relationship. Turning moments come from calculating the lateral area of the head (plus any crests) and determining the associated lift (aerodynamic force) as a function of flight speed, with flight speeds being based on body mass. Rotational inertias were calculated from the three-dimensional mass distribution of the axial body, the limbs, and the flight membranes. The close correlation between turning moment and rotational inertia was used to revise the life restorations of two pterosaurs and to infer relatively lower flight speeds in another two.

Genetic variants for head size share genes and pathways with cancer.

The size of the human head is highly heritable, but genetic drivers of its variation within the general population remain unmapped. We perform a genome-wide association study on head size (N = 80,890) and identify 67 genetic loci, of which 50 are novel. Neuroimaging studies show that 17 variants affect specific brain areas, but most have widespread effects. Gene set enrichment is observed for various cancers and the p53, Wnt, and ErbB signaling pathways. Genes harboring lead variants are enriched for macrocephaly syndrome genes (37-fold) and high-fidelity cancer genes (9-fold), which is not seen for human height variants. Head size variants are also near genes preferentially expressed in intermediate progenitor cells, neural cells linked to evolutionary brain expansion. Our results indicate that genes regulating early brain and cranial growth incline to neoplasia later in life, irrespective of height. This warrants investigation of clinical implications of the link between head size and cancer.

Effect of sound-induced vibrations of the pinna on head-related transfer functions: Experimental and numerical investigations.

Numerical simulations of head-related transfer functions (HRTFs) conventionally assume a rigid boundary condition for the pinna. The human pinna, however, is an elastic deformable body that can vibrate due to incident acoustic waves. This work investigates how sound-induced vibrations of the pinna can affect simulated HRTF magnitudes. The work will motivate the research question by measuring the sound-induced vibrational patterns of an artificial pinna with a high-speed holographic interferometric system. Then, finite element simulations are used to determine HRTFs for a tabletop model of the B&K 5128 head and torso simulator for a number of directions. Two scenarios are explored: one where the pinna is modeled as perfectly rigid, and another where the pinna is modeled as linear elastic with material properties close to that of auricular cartilage. The findings suggest that pinna vibrations have negligible effects on HRTF magnitudes up to 5 kHz. The same conclusion, albeit with less certainty, is drawn for higher frequencies. Finally, the importance of the elastic domain's material properties is emphasized and possible implications for validation studies on dummy heads 1as well as the limitations of the present work are discussed in detail.

Measurements of oculo-palpebral landmarks and evaluation of patient's head position.

PURPOSE: Keeping the head in a neutral position is requisite for glasses/lenses/head-up designs, the suitability of oculo-plastic surgery and for the grading the eye shift. Anatomically incompatible glasses are one of the common problems affecting accommodation, reducing comfort and disturbing by causing symptoms such as dizziness and nausea. The oculo-palpebral measurements act as a key determinant in symmetrical facial attractiveness. This study aims to investigate the most effective oculo-palpebral landmarks, head-neutral as the ideal position, taking into account of individual anatomical differences of these patients. METHODS: 100 females and 100 males aged between 18 and 20 years were photographed. Digital photogrammetric measurements were made with the ImageJ program. Interpupillary and interhelical distances, besides bilateral palpebral fissure length and height, and iris diameter were calculated on front-facing photographs. RESULTS: Mean interpupillary distance was measured wider in males than in females. The mean length of palpebral fissure was 31 mm; palpebral fissure height was 10 mm. These figures were valid in both eyes and gender. The interhelical distance was calculated as the mean and was measured longer in men. Since the measurement values were the same in both sexes and on both sides, they were determined as important landmarks for controlling the head-neutral position, evaluating whether there was a deviation in the eye, and measuring the numerical value when detected. CONCLUSION: It is essential to check the side-symmetry of the patient's palpebral fissure height, palpebral fissure length, diameter of iris and corneal depth during oculo-plastic invention and artificial design.

Head circumference at birth and postnatal growth trajectory in vulnerable groups from Argentina.

OBJECTIVES: To investigate the association between the anthropometric status at birth and brain and bone growth during the first year of life. According to the brain-sparing hypothesis, we expect catch-up to be faster in head circumference (HC) than in body length. METHODS: This is a longitudinal design that included Argentinian infants under 12 months of age with at least three anthropometric records. We classified study participants into four growth status categories according to z-scores for HC (HCZ) and length (LAZ) at birth, with z-score = -2 as a threshold. We used the Count model to describe growth trajectories in HC and length in the first year of life according to the growth status at birth. Recovery indicator for HC and length was taken as the time until the predicted growth trajectory surpassed the threshold curve predicted by z-score = -2 for age. RESULTS: Growth models included 3399 infants. There were significant differences in the growth parameters between groups in all cases (p < 0.05). Within the group with a low HCZ and a low LAZ at birth, HC recovery was faster than length. In the case of a low z-score for only one of the variables, newborns with a low HCZ recovered faster than individuals born with a low LAZ. CONCLUSIONS: The postnatal growth pattern in HC and length is associated with the growth status of HC and length at birth. As we hypothesized, the fastest postnatal recovery occurs for HC in cases of intrauterine delayed growth.

Linking shape conspicuous asymmetry with shape covariation patterns and performance in the insect head and mandibles.

Bilateral symmetry is widespread across animals, yet, among bilaterians, many cases of conspicuous asymmetries evolved. This means that bilaterally homologous structures on the left and right sides display divergent phenotypes. The evolution of such divergent phenotypes between otherwise similarly shaped structures can be thought to be favored by modularity, but this has rarely been studied in the context of left-right differences. Here, we provide an empirical example, using geometric morphometrics to assess patterns of asymmetry and covariation between landmark partitions in a grasshopper with conspicuously asymmetric mandibles. Our morphometric data confirm the presence of strictly directional conspicuous asymmetry in the mandibles and surrounding structures. Covariance patterns and tests hint at a strong integration between mandibles despite their divergent morphologies, and variational modularity with the head capsule. While mandibles have been selected to achieve a key-and-lock morphology by having interlocking shapes, the developmental modularity required to achieve this seems to be overwritten by developmental and/or functional integration, allowing the precise matching required for feeding. The consequent conflicting covariation patterns are reminiscent of the palimpsest model. Finally, the degree of directional asymmetry appears to be under selection, although we find no relationship between bite force and mandible shape or asymmetry.

Birth weight and head circumference discordance and outcome in preterms: results from the EPIPAGE-2 cohort.

OBJECTIVE: To determine whether the relative measurement of birth weight (BW) and head circumference (HC) in preterm infants is associated with neurological outcomes. METHODS: The EPIPAGE-2 Study included 3473 infants born before 32 weeks' gestation, classified based on their Z-score of BW and HC on the Fenton curves as concordant (≤1 SD apart) or discordant (>1 SD difference). We defined four mutually exclusive categories: discordant smaller BW (sBW) with BW-1SD and concordant small measurement (CsM) with BW and HC concordant and both ≤-1SD. Neurological outcomes at 5.5 years were evaluated with standard tests. RESULTS: 2592 (74.8%) preterm neonates were categorised as CM, 258 (7.4%) CsM, 378 (10.9%) sHC and 239 (6.9%) sBW. Compared with the CM children, those born with CsM had significantly higher risks of cognitive deficiency (adjusted OR (aOR) 1.3, 95% CI (1.0 to 2.0)), developmental coordination disorders (aOR 2.6 (1.5 to 4.4)) and need for special school services (aOR 2.3 (1.5 to 3.7)). Those born with sBW had significantly lower risk of cognitive deficiency (aOR 0.6 (0.4 to 0.9)) and the sHC group significantly higher risk of developmental coordination disorders (aOR 1.8 (1.0 to 3.2)). CONCLUSIONS: The relative discordance of these preterm infants' BW and HC was associated with their neurological outcomes. It merits further exploration as an indirect indicator of development. TRIAL REGISTRATION NUMBER: NCT03078439.

Postcranial anatomy of Prestosuchus chiniquensis (Archosauria: Loricata) from the Triassic of Brazil.

Prestosuchus chiniquensis is the best represented pseudosuchian archosaur from the Pinheiros-Chiniquá Sequence, Middle-Late Triassic (Ladinian/Carnian) of the Santa Maria Supersequence, Southern Brazil. Several incomplete specimens attributed to this species have been described, but the morphology of the postcranial skeleton of P. chiniquensis is poorly known. In this contribution we present the postcranial material of the UFRGS-PV-0629-T specimen, concluding its description, as its skull and endocast have already been described. Additionally, histological data provided new information on the poorly known ontogenetic series of P. chiniquensis, and on its growth patterns suggesting a longer period of slow growth when compared to other basal Loricata species. A phylogenetic analysis placed UFRGS-PV-0629-T in a group composed by the lectotype, paralectotype, and other described P. chiniquensis specimens, further corroborating our taxonomic hypothesis, that specimens of basal Loricata collected in Brazil are closely related to each other. Due to the association of characters found in the phylogenetic analysis, the specimen UFRGS-PV-0629-T is attributed as the most complete material ever found for P. chiniquensis. As such, it is clear that the material presented here provides important new information on P. chiniquensis. Based on the results presented here, we revised the diagnosis for P. chiniquensis. However, it also evidences the need for new discoveries and studies of other specimens seeking to understand this and other closely related species, which were important components of worldwide trophic webs of the Triassic biotas.

Evolution of the temporal skull openings in land vertebrates: A hypothetical framework on the basis of biomechanics.

The complex constructions of land vertebrate skulls have inspired a number of functional analyses. In the present study, we provide a basic view on skull biomechanics and offer a framework for more general observations using advanced modeling approaches in the future. We concentrate our discussion on the cranial openings in the temporal skull region and work out two major, feeding-related factors that largely influence the shape of the skull. We argue that (1) the place where the most forceful biting is conducted and (2) the handling of resisting food (sideward movements) constitute the formation and shaping of either one or two temporal arcades surrounding these openings. Diversity in temporal skull anatomy among amniotes can be explained by specific modulations of these factors with different amounts of acting forces which inevitably lead to deposition or reduction of bone material. For example, forceful anterior bite favors an infratemporal bar, whereas forceful posterior bite favors formation of an upper temporal arcade. Transverse forces (inertia and resistance of seized objects) as well as neck posture also influence the shaping of the temporal region. Considering their individual skull morphotypes, we finally provide hypotheses on the feeding adaptation in a variety of major tetrapod groups. We did not consider ligaments, internal bone structure, or cranial kinesis in our considerations. Involving those in quantitative tests of our hypotheses, such as finite element system synthesis, will provide a comprehensive picture on cranial mechanics and evolution in the future.

Ctenocephalides orientis and Ctenocephalides felis in Thailand: Head geometry by species, sex and geography.

Fleas in the genus Ctenocephalides serve as biological vectors or intermediate hosts of microorganisms such as bacteria, rickettsia, protozoa and helminths. Ctenocephalides felis has a worldwide distribution, while C. orientis has long been considered as a subspecies of C. felis in Asia. To help the morphological recognition of these two species and further explore their differences, we used the geometric morphometric approach applied to the head. Both sexes were examined. Five anatomical landmarks of the head were used, and to capture the curvature of the front head, 10 semilandmarks were added. There was a consistent difference in species classification accuracy when considering landmarks only versus their combination with semilandmarks, suggesting the importance of the curve of the head as a taxonomic signal. Using or not the labels in the reclassification analyses, the head shape allowed by itself almost perfect recognition of the two species, in both sexes, even after adjustment for prior probabilities. The same approach disclosed a high level of sexual size and shape dimorphism in both species. The contribution of size variation to the discrimination by shape was much more important between sexes (from 27% to 45%) than between species (from 0.7% to 7.1%). Nevertheless, in our data, size never could represent a way to reliably recognise the sex of an individual, even less its species. Geographical variation in head shape could only be explored for the C. orientis sample. No significant correlation of morphometric variation with geography could be detected, which would be consistent with gene flow between Thai provinces. The geometric morphometric approach of the flea head, when it incorporates head curves, is a promising tool for rapid, economical, and accurate species and sex identification. It is, therefore, a useful tool for future epidemiological and demographic studies.

Old fossil findings in the Upper Triassic rocks of southern Brazil improve diversity of traversodontid cynodonts (Therapsida, Cynodontia).

In this contribution we describe a new genus and species of gomphodontosuchine cynodont from the Late Triassic Hyperodapedon Assemblage Zone (AZ) of the Santa Maria Supersequence of southern Brazil, based on material collected 20 years ago. The new taxon, Santagnathus mariensis gen. et sp. nov., is based on numerous cranial and postcranial remains, which altogether provide data on several parts of the skeleton. Santagnathus mariensis is closely related to Siriusgnathus niemeyerorum and Exaeretodon spp. and expands the knowledge about gomphodontosuchine cynodonts. Morphologically, the new species has a skull bauplan particularly similar to S. niemeyerorum and E. riograndensis, differing from them by a unique combination of traits such as three upper incisors, the absence of a descending process in the jugal, a more posterior position of the postorbital bar and a preorbital region larger than the temporal one. The new traversodontid was found associated with the rhynchosaur Hyperodapedon sp., corroborating the assignment of the cynodont fossils to the Hyperodapedon AZ. We also provide comments on the status of the Argentine traversodontid cynodont Proexaeretodon vincei, typically considered a junior synonym of Exaeretodon argentinus, and here accepted as a valid taxon.

Wormian Bones: Prevalence, Topography, and Implications.

BACKGROUND: Wormian bones also known as sutural bones are asymmetrical and shapeless bones occurring in cranial sutures and fontanelle of the skull. Their incidence is reported to vary in population. The exact etiology is debatable, but their formation is under the control of both genetic and environmental factors and has great anthropological and clinical implications related to the cranium. Due to high clinical relevance of Wormian bones, the study was carried out. The aim of the study is to expound the incidence and topography of Wormian bones along with clinical significance in dry adult skulls of Indian origin. METHODS: The study was conducted in the Department of Anatomy using 200 complete adult dry skulls of unknown age and sex. All the sutures in the skull were inspected for the presence of Wormian bones. The Wormian bones were classified into 10 categories, and associated implications were brought out. The Wormian bones were photographed, and details were compared with the available literature. RESULTS: The Wormian bones were observed in 190 (380 sides) skulls with 186 on the right side and 108 on the left side. The predominance site of sutural bone was lambdoid suture followed by sagittal suture. The least common site of Wormian bone was lambda. CONCLUSION: The detailed information of precise topography, frequency, and number of Wormian bones is of utmost use for surgeons performing surgery on the skull, anthropologists for identifying races, and forensic scientists for investigating child abuse cases.

Functional morphology of the Triassic apex predator Saurosuchus galilei (Pseudosuchia: Loricata) and convergence with a post-Triassic theropod dinosaur.

Pseudosuchian archosaurs, reptiles more closely related to crocodylians than to birds, exhibited high morphological diversity during the Triassic and are thus associated with hypotheses of high ecological diversity during this time. One example involves basal loricatans which are non-crocodylomorph pseudosuchians traditionally known as "rauisuchians." Their large size (5-8+ m long) and morphological similarities to post-Triassic theropod dinosaurs, including dorsoventrally deep skulls and serrated dentitions, suggest basal loricatans were apex predators. However, this hypothesis does not consider functional behaviors that can influence more refined roles of predators in their environment, for example, degree of carcass utilization. Here, we apply finite element analysis to a juvenile but three-dimensionally well-preserved cranium of the basal loricatan Saurosuchus galilei to investigate its functional morphology and to compare with stress distributions from the theropod Allosaurus fragilis to assess degrees of functional convergence between Triassic and post-Triassic carnivores. We find similar stress distributions and magnitudes between the two study taxa under the same functional simulations, indicating that Saurosuchus had a somewhat strong skull and thus exhibited some degree of functional convergence with theropods. However, Saurosuchus also had a weak bite for an animal of its size (1015-1885 N) that is broadly equivalent to the bite force of modern gharials (Gavialis gangeticus). We infer that Saurosuchus potentially avoided tooth-bone interactions and consumed the softer parts of carcasses, unlike theropods and other basal loricatans. This deduced feeding mode for Saurosuchus increases the known functional diversity of basal loricatans and highlights functional differences between Triassic and post-Triassic apex predators.

Anatomical Characteristics, Relations, and Clinical Considerations of the Facial Index and Cephalic Index in Young Chileans Aged Between 18 and 21 Years / Características Anatómicas, Relaciones y Consideraciones Clínicas del Índice Facial e Índice Cefálico en Jóvenes Chilenos entre 18 y 21 Años

SUMMARY: Humans throughout history have shown similarities between both their cephalic and facial complexion, among certain ethnic groups, due to genetic and demographic factors. Several studies have demonstrated the different constitutions of specific groups of people in order to generate data of a certain population or group. The present research aims to preliminarily study the existence of possible relations between Cephalic Index and Facial Index among categories of individuals in an odontology student population from a private university in Santiago, Chile. Empirical, descriptive, and cross-sectional study. In this study, 129 students with age range 18-21 were taken as subjects in a non-probabilistic way. Regarding Cephalic Index (CI), the Retzius classification was used, and the Facial Index (FI) was measured considering the maximum height of the face, from nasion to gnathion (Na-Gn), and the maximum width, from right zygion to left zygion (Zr-Zl). In this study, 129 people were taken as sample, 82 females and 47 males. Among women, the most predominant cephalic biotype was brachycephalic (59.8 %), followed by mesocephalic (37.8 %), and dolichocephalic (2.4 %). On the other hand, men's most common biotype was mesocephalic (57.5 %), followed by brachycephalic (36.2 %), and dolichocephalic (6.4 %). Regarding facial biotype, both in female and male subjects the following pattern was shown: euryprosopic (F: 59.7 %, M: 59.6 %), mesoprosopic (F: 26.8 %, M: 29.8 %), and leptoprosopic (F: 13.4 %, M: 10.6 %). Facial parameters of the subjects (odontology students from a Chilean university) tend to be mostly euryprosopic, followed by mesoprosopic and leptoprosopic. Additionally, mesocephalic biotypes tend to be similar to other studies conducted in Chile.

Los seres humanos a lo largo de la historia han mostrado similitudes tanto entre su complexión cefálica como facial, entre ciertos grupos étnicos, debido a factores genéticos y demográficos. Varios estudios han demostrado las diferentes constituciones de grupos específicos de personas para poder generar datos de una determinada población o grupo. La presente investigación tiene como objetivo estudiar preliminarmente la existencia de posibles relaciones entre el Índice Cefálico y el Índice Facial entre categorías de individuos en una población de estudiantes de odontología de una universidad privada de Santiago, Chile, en un estudio empírico, descriptivo y transversal. En este estudio, se tomó como sujetos de forma no probabilística a 129 estudiantes con edades comprendidas entre 18 y 21 años. Respecto al Índice Cefálico (IC), se utilizó la clasificación de Retzius, y el Índice Facial (FI) se midió considerando la altura máxima de la cara, desde nasión hasta gnatión (Na-Gn), y el ancho máximo, desde cigio derecho a izquierdo. cigio (Zr-Zl). En este estudio se tomó como muestra 129 personas, 82 mujeres y 47 hombres. Entre las mujeres, el biotipo cefálico más predominante fue el braquicéfalo (59,8 %), seguido del mesocefálico (37,8 %) y el dolicocéfalo (2,4 %). Por otro lado, el biotipo más común en los hombres fue el mesocefálico (57,5 %), seguido del braquicéfalo (36,2 %) y el dolicocéfalo (6,4 %). Respecto al biotipo facial, tanto en sujetos femeninos como masculinos se mostró el siguiente patrón: euriprosópico (F: 59,7 %, M: 59,6 %), mesoprosópico (F: 26,8 %, M: 29,8 %) y leptoprosópico (F: 13,4 %, M: 10,6 %). Los parámetros faciales de los sujetos (estudiantes de odontología de una universidad chilena) tienden a ser en su mayoría euriprosópicos, seguidos de mesoprosópicos y leptoprosópicos. Además, los biotipos mesocefálicos tienden a ser similares a otros estudios realizados en Chile.

Variación Morfológica en la Musculatura Cefálica de Diplobatis ommata y Narcine vermiculatus (Chondrychthyes: Narcinidae) / Morphological Variation in the Cephalic Musculature of Diplobatis ommata and Narcine vermiculatus (Chondrychthyes: Narcinidae)

Los trabajos realizados sobre batoideos han demostrado que existen grandes variaciones en la musculatura de la región cefálica ventral, estos cambios están asociados a los diferentes estilos de vida de los organismos y por tanto, a los mecanismos de alimentación. El objetivo de este trabajo fue llevar a cabo un estudio comparativo de la morfología de la musculatura cefálica dorsal y ventral de dos especies de la familia Narcinidae: Narcine vermiculatus y Diplobatis ommata. Se observó que ambas especies comparten un patrón morfológico común. Los músculos que mostraron mayores variaciones en la región dorsal fueron el depresor rostral, el preorbital lateral y el elevador rostral. La diferencia más importante en esta región, entre ambas especies, fue la ausencia del músculo cucularis en D. ommata. En la región ventral las principales diferencias se observaron en los músculos depresor mandibular, preorbital medial, interbranquial y depresor hiomandibular. Este último músculo está formado por dos paquetes en D. ommata, en tanto que en N. vermiculatus por uno. Se puede concluir que la morfología de la musculatura cefálica es constante; sin embargo, se observan diferencias importantes en el grado de desarrollo de los músculos tanto en la región dorsal como en la ventral.

SUMMARY: Works conducted on batoids have revealed large variations in the musculature of the ventral cephalic region, associated to the different lifestyles of these organisms and, therefore, to their feeding mechanisms. This work aimed to conduct a comparative study of the dorsal and ventral cephalic muscular morphology of two species of the family Narcinidae: Narcine vermiculatus and Diplobatis ommata. It was observed that both species share a common morphological pattern. Muscles with larger variations in the dorsal region were the rostral depressor, the lateral preorbital and the rostral elevator. The most relevant difference in this region between both species was the absence of the cucularis muscle in D. ommata. In the ventral region, the main differences were observed in the mandibular depressor, medial preorbital, interbranchial and hyomandibular depressor muscles. In D. ommata, the latter is formed by two packages, and by one in N. vermiculatus. It can be concluded that the cephalic musculature is constant; however, significant differences are observed in the muscle development degree in both the dorsal and the ventral regions.

Radiological examination of the skull of Siirt-coloured mohair goat, Romanov and Hamdani sheep.

The skull is a vitally important complex structure formed by the combination of many bones. Craniometric studies are performed with various imaging methods to determine morphometric characteristics in animals. One of these methods is radiography. In our study, skulls of 14 Hamdani sheep, 20 Siirt-coloured mohair goats and 20 Romanov sheep breeds were used. Skull sections were taken with a computed tomography device and saved in DICOM format. Nine separate measurements and six index calculations were made from the images. In the study, firstly, the gender difference was ignored and the similarities and differences between the species were recorded. In addition, gender differences were determined statistically, without making any distinction between species. Correlation analysis was performed to compare measurement parameters between animal species. As a result of the study, the highest skull length (SL) and cranial length (CL) values were determined in the Siirt-coloured mohair goat. It was determined that the difference between Romanov sheep and Siirt-coloured mohair goat in CL parameter was not statistically significant (p > 0.05). In addition, a statistically significant difference was observed between the Romanov sheep breed and the Hamdani sheep breed (p < 0.01). The external length of the cranium (ELC) measurement parameter was found to have a statistically significant difference in three animals (p < 0.01). According to the results of the correlation analysis, the highest correlation value was determined between cranial width (CW) and CL parameters (r = 0.920). When the species difference was ignored, and the statistical difference of the internal height of the cranium (IHC) parameter was found to be significant between female and male animals (p < 0.05). In addition, it was determined that SL, CW and internal cranium index (ICI) parameters had a significant difference depending on sex (p < 0.01). It is foreseen that the obtained data can be used in sciences such as zoo archaeology, anatomy, surgery and forensic medicine.

The early Cambrian Kylinxia zhangi and evolution of the arthropod head.

The early Cambrian Kylinxia zhangi occupies a pivotal position in arthropod evolution, branching from the euarthropod stem lineage between radiodonts (Anomalocaris and relatives) and "great-appendage" arthropods.1,2 Its combination of appendage and exoskeletal features is viewed as uniquely bridging the morphologies of so-called "lower" and "upper" stem-group euarthropods.3,4 Microtomographic study of new specimens of Kylinxia refines and corrects previous interpretation of head structures in this species. Phylogenetic analyses incorporating new data reinforce the placement of Kylinxia in the euarthropod stem group but support new hypotheses of head evolution. The head of Kylinxia is composed of six segments, as in extant mandibulates, e.g., insects.5 In Kylinxia, these are an anterior sclerite associated with an unpaired median eye and paired lateral eyes (thus three rather than five eyes as was previously described1), deutocerebral frontal-most appendages, and four pairs of biramous appendages (rather than two pairs of uniramous appendages). Phylogenetic trees suggest that a six-segmented head in the euarthropod crown group was already acquired by a common ancestor with Kylinxia. The segmental alignment and homology of spinose frontal-most appendages between radiodonts and upper stem-group euarthropods6,7,8,9,10 is bolstered by morphological similarities and inferred phylogenetic continuity between Kylinxia and other stem-group euarthropods.

The neuroanatomy and pneumaticity of Hamadasuchus (Crocodylomorpha, Peirosauridae) from the Cretaceous of Morocco and its paleoecological significance for altirostral forms.

We describe the endocranial structures of Hamadasuchus, a peirosaurid crocodylomorph from the late Albian-Cenomanian Kem Kem group of Morocco. The cranial endocast, associated nerves and arteries, endosseous labyrinths, and cranial pneumatization, as well as the bones of the braincase of a new specimen, are reconstructed and compared with extant and fossil crocodylomorphs, which represent different lifestyles. Cranial bones of this specimen are identified as belonging to Hamadasuchus, with close affinities with Rukwasuchus yajabalijekundu, another peirosaurid from the 'middle' Cretaceous of Tanzania. The endocranial structures are comparable to those of R. yajabalijekundu but also to baurusuchids and sebecids (sebecosuchians). Paleobiological traits of Hamadasuchus, such as alert head posture, ecology, and behavior are explored for the first time, using quantitative metrics. The expanded but narrow semi-circular canals and enlarged pneumatization of the skull of Hamadasuchus are linked to a terrestrial lifestyle. Continuing work on the neuroanatomy of supposedly terrestrial crocodylomorphs needs to be broadened to other groups and will allow to characterize whether some internal structures are affected by the lifestyle of these organisms.

A Morphometric Study of Head in the Population of Young Chinese Adults / Estudio Morfométrico de la Cabeza en la Población de Adultos Jóvenes Chinos

SUMMARY: Due to the complexity of head shape, limited 1D or 2D head anthropometry fail to fully capture its shape characteristics. Currently, there is limited research on clustering analysis of head shape from a shape difference perspective, especially for the head shape of Chinese people. Head shape is influenced by factors such as race, sex, and age, making it imperative to create a head shape database for Chinese individuals. In this study, three-dimensional head data of 339 Chinese young adult were collected, and the head shapes were clustered into 7 clusters using an improved k-medoids algorithm. The differences between clusters and the average head shape were further analyzed. It can be foreseen that the head shape database for Chinese young adult constructed in this study has important reference value for the ergonomic design of head-related products and head morphology research, among other fields.

Debido a la complejidad de la forma de la cabeza, la antropometría limitada de ésta, en 1D o 2D, no logra capturar completamente sus características de forma. Actualmente, existen estudios limitados sobre el análisis de agrupamiento de la forma de la cabeza, desde una perspectiva de diferencia de forma, especialmente en el caso de la población china. La forma de la cabeza está influenciada por factores como la raza, el sexo y la edad, por lo que resulta imperativo crear una base de datos sobre la forma de la cabeza de los individuos chinos. En este estudio, se recopilaron datos tridimensionales de la cabeza de 339 adultos jóvenes chinos, y las formas de la cabeza se agruparon en 7 grupos utilizando un algoritmo k-medoids mejorado. Las diferencias entre los grupos y la forma promedio de la cabeza se analizaron a profundidad. Se puede prever que la base de datos sobre la forma de la cabeza de adultos jóvenes chinos construida en este estudio, tiene un valor de referencia importante para el diseño ergonómico de productos relacionados con la morfología de la cabeza, entre otros campos.

Evaluation of Head and Cervical Spine Posture after Therapy with Maxillary Protraction Appliances / Evaluación de la Postura de la Cabeza y la Columna Cervical Después de la Terapia con Aparatos de Protracción Maxilar

SUMMARY: The objective of this study was to evaluate the changes of head and cervical spine posture of skeletal class malocclusion in adolescent with maxillary protraction. Thirty cases of skeletal class malocclusion were randomly selected from the Stomatological Hospital of Shanxi Medical University. High-quality lateral cephalograms were collected including pre- and posttreatment to compare the changes of head and cervical spine posture. Data were processed using SPSS 26.0 statistical software. The paired-t test was used to compare pre- and posttreatment mean angular measurements.A significant difference in the SNA(p<0.001), SNB(p<0.01), and ANB(p<0.001) between T1 and T2 showed an improvement in the sagittal relationships. A significant change was observed in middle cervical spine posture, while upper cervical spine posture variables showed no significant difference after treatment. Skeletal class with maxillary protraction appliance not only led to the improvement of sagittal relationship, but also changed the middle cervical spine posture.

El objetivo de este estudio fue evaluar los cambios en la postura de la cabeza y la columna cervical debido a la maloclusión clase esquelética en adolescentes con protracción maxilar. Treinta casos de maloclusión de clase esquelética fueron seleccionados al azar del Hospital Estomatológico de la Universidad Médica de Shanxi. Se recogieron cefalogramas laterales de alta calidad, incluidos el tratamiento previo y posterior, para comparar los cambios en la postura de la cabeza y la columna cervical. Los datos se procesaron con el software estadístico SPSS 26.0. Se utilizó la prueba t pareada para comparar las medidas angulares medias antes y después del tratamiento. Una diferencia significativa en SNA (p <0,001), SNB (p <0,01) y ANB (p <0,001) entre T1 y T2 mostró una mejora en las relaciones sagitales. Se observó un cambio significativo en la postura de la columna cervical media, mientras que las variables de postura de la columna cervical superior no mostraron diferencias significativas después del tratamiento. La clase esquelética con aparato de protracción maxilar no solo condujo a la mejora de la relación sagital, sino que también cambió la postura de la columna cervical media.