Toxicity of aromatic pollutants and photooxidative intermediates in water: A QSAR study.

Extensive commercial use of aromatic hydrocarbons results with significant amounts of these chemicals and related by-products in waters, causing a severe ecological and health threat, thus requiring an increased attention. This study was aimed at developing models for prediction of the initial toxicity of the aromatic water-pollutants (expressed as EC50 and TU0) as well as the toxicity of their intermediates at half-life of the parent pollutant (TU1/2). For that purpose, toxicity toward Vibrio fischery was determined for 36 single-benzene ring compounds (S-BRCs), diversified by the type, number and position of substituents. Quantitative structure-activity relationship (QSAR) methodology paired with genetic algorithm optimization tool and multiple linear regression was applied to obtain the models predicting the targeted toxicity, which are based on pure structural characteristics of the tested pollutants, avoiding thus additional experimentation. Upon derivation of the models and extensive analysis on training and test sets, 4-, 4- and 5-variable models (for EC50 and TU0, TU1/2, respectively) were selected as the most predictive possessing 0.839

Simple and Clean Photoinduced Aromatic Trifluoromethylation Reaction.

We describe a simple, metal- and oxidant-free photochemical strategy for the direct trifluoromethylation of unactivated arenes and heteroarenes under either ultraviolet or visible light irradiation. We demonstrated that photoexcited aliphatic ketones, such as acetone and diacetyl, can be used as promising low-cost radical initiators to generate CF3 radicals from sodium triflinate efficiently. The broad utility of this strategy and its benefit to medicinal chemistry are demonstrated by the direct trifluoromethylation of unprotected bidentate chelating ligand, xanthine alkaloids, nucleosides, and related antiviral drug molecules.

Theoretical-computational modeling of photo-induced charge separation spectra and charge recombination kinetics in solution.

In this study we propose a theoretical-computational method, essentially based on molecular dynamics simulations and quantum-chemical calculations, for modelling the photo-induced charge separation (CS) and the subsequent charge recombination (CR) processes in solution. In particular we have reproduced the low-energy UV-Vis spectra of systems composed by an aromatic species (Ar = benzene or indene) and tetracyanoethylene (TCNE) in chloroform solution, dominated by the formation of the Ar(+)-TCNE(-) ion pair (IP) complex. The kinetics of the charge recombination process leading to the regeneration of Ar and TCNE has also been modelled. In both the cases the agreement with the experimental data is satisfactory. Although the presence of systematic deficiencies makes our approach unable to address some key aspects of the above processes (e.g. the ultrafast internal vibrational redistribution), it appears to be a rather promising tool for modelling the CS-CR process for atomic-molecular systems of very high complexity. The involvement of the triplet IP complex has also been discussed.

Microwave-assisted synthesis and characterization of optically active poly (ester-imide)s incorporating L-alanine.

Pyromellitic dianhydride (1) was reacted with L-alanine (2) to result [N,N'-(pyromellitoyl)-bis-L-alanine diacid] (3). This compound (3) was converted to N,N'-(pyromellitoyl)-bis-L-alanine diacyl chloride (4) by reaction with thionyl chloride. The microwave-assisted polycondensation of this diacyl chloride (4) with polyethyleneglycol-diol (PEG-200) and/or three synthetic aromatic diols furnish a series of new PEIs and Co-PEIs in a laboratory microwave oven (Milestone). The resulting polymers and copolymers have inherent viscosities in the range of 0.31-0.53 dl g(-1). These polymers are optically active, thermally stable and soluble in polar aprotic solvents such as DMF, DMSO, NMP, DMAc, and sulfuric acid. All of the above polymers were fully characterized by IR spectroscopy, (1)H NMR spectroscopy, elemental analyses, specific rotation and thermal analyses. Some structural characterizations and physical properties of these optically active PEIs and Co-PEIs have been reported.

The allylation reactions of aromatic aldehydes and ketones with tin dichloride in water.

The allylation reactions of aromatic aldehydes and ketones were carried out in 31-86% yield using SnCl(2)-H(2)O system under ultrasound irradiation at r.t. for 5h. The reactions in the same system gave homoallyl alcohols in 21-84% yield with stirring at r.t. for 24h. Compared with traditional stirring methods, ultrasonic irradiation is more convenient and efficient.

Sonochemical degradation of various monocyclic aromatic compounds: relation between hydrophobicities of organic compounds and the decomposition rates.

Various aromatic compounds, i.e., nitrobenzene, aniline, phenol, benzoic acid, salicylic acid, 2-chlorophenol, 4-chlorophenol, styrene, chlorobenzene, toluene, ethylbenzene and n-propylbenzene were decomposed under identical ultrasonic irradiation conditions. The relationships between the initial rates of degradation of these aromatic compounds and their physicochemical parameters were systematically investigated. It was revealed that some correlations between the degradation rates and parameters of volatility, Henry's law constant and vapor pressure, were observed only in the limited high range of parameters. It was suggested that the Henry's law constant and vapor pressure had influenced on the rate of degradation for some of the tested aromatic compounds. In contrast, better correlations between the initial rates of degradation and hydrophobic parameters, water solubility and LogP (water-octanol partition coefficient), were observed over the wide range of chosen parameters. These results meant that the hydrophobicity of the compounds significantly affected their accumulation at the gas-liquid interface of the bubbles and it was the most important factor for the sonochemical degradation of aromatic compounds. In particular, for the sonolysis of water-insoluble organic compounds, LogP was found to be the representative parameter for understanding the hydrophobic properties of water-insoluble compounds.

Ultrasound-assisted thiocyanation of aromatic and heteroaromatic compounds using ammonium thiocyanate and DDQ.

Thiocyanation of various aromatic and heteroaromatic compounds has been achieved in the presence of ammonium thiocyanate (NH(4)SCN) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in methanol solution under ultrasound irradiation. An ultrasonic probe of 24 kHz frequency has been used for this study. Whereas the use of ultrasound increases the rate of reactions compared with reactions at reflux conditions, the electron-donor ability of aromatic nucleus enhances also the rate of reaction.

Oxygen-induced concurrent ultrasonic degradation of volatile and non-volatile aromatic compounds.

Acoustic cavitation, induced by ultrasound, can be used to eliminate organic pollutants from water. This type of ultrasonic treatment of polluted water can be grouped with those generally referred to as advanced oxidative processes since it involves hydroxyl radicals. In this case these highly active species are generated from the dissociation of water and oxygen dissociation caused by cavitation bubble collapse. The cavitation induced degradation rates of organic compounds in water are mainly linked to their vapor pressure and solubility and here we will further explore these links by examining the degradation of a mixture of two materials with different physical properties, chlorobenzene and 4-chlorophenol. The results obtained when a dilute solution of a mixture of these compounds saturated with argon is subjected to sonication at 300 kHz, parallels previous observations achieved in an aerated aqueous medium at 500 kHz. The two compounds exhibit sequential degradation with the more volatile chlorobenzene entering the cavitation bubble and being destroyed first. The 4-chlorophenol degradation occurs subsequently only when the chlorobenzene has been completely destroyed. The two compounds exhibit different behavior when sonicated in water saturated with oxygen. Under these conditions the two compounds are degraded simultaneously, a remarkable result for which two explanations can be proposed, both of which are based on the formation of additional OH radical species: The ability to produce conditions for the simultaneous elimination of two organic compounds by the use of oxygen is of great importance in the developing field of ultrasonic water treatment.

Photophysics of intramolecularly hydrogen-bonded aromatic systems: ab initio exploration of the excited-state deactivation mechanisms of salicylic acid.

Excited state reaction paths and the corresponding energy profiles of salicylic acid have been determined with the CC2 method, which is a simplified version of singles-and-doubles coupled cluster theory. At crucial points of the potential energy hypersurfaces, single-point energy calculations have been performed with the CASPT2 method (second-order perturbation theory based on the complete active space self-consistent field reference). Hydrogen transfer along the intramolecular hydrogen bond as well as torsion and pyramidization of the carboxy group have been identified as the most relevant photochemical reaction coordinates. The keto-type planar S(1) state reached by barrierless intramolecular hydrogen transfer represents a local minimum of the S(1) energy surface, which is separated by a very low barrier from a reaction path leading to a low-lying S(1)-S(0) conical intersection via torsion and pyramidization of the carboxy group. The S(1)-S(0) conical intersection, which occurs for perpendicular geometry of the carboxy group, is a pure biradical. From the conical intersection, a barrierless reaction path steers the system back to the two known minima of the S(0) potential energy surface (rotamer I, rotamer II). A novel structure, 7-oxa-bicyclo[4.2.0]octa-1(6),2,4-triene-8,8-diol, has been identified as a possible transient intermediate in the photophysics of salicylic acid.

Photoinduced charge separation in titania nanotubes.

The photocatalytic one-electron oxidation reaction of an aromatic compound during UV light irradiation of titania nanotubes and nanoparticles was investigated using time-resolved diffuse reflectance spectroscopy. Remarkably long-lived radical cations of the aromatic compound and trapped electrons were observed for the nanotubes when compared to those for nanoparticles. The influences of the morphology on the one-electron oxidation process of an aromatic compound adsorbed on the surface were discussed in terms of the charge recombination dynamics between the radical cation and electrons in TiO2.

Comparison of distillation and ultrasound-assisted extraction methods for the isolation of sensitive aroma compounds from garlic (Allium sativum).

A comparative study of traditional simultaneous distillation extraction (SDE), microwave assisted hydrodistillation extraction (MWHD) and ultrasound-assisted extraction (USE) is presented, for the extraction of essential oils from fresh garlic (Allium sativum) cloves. Each method is evaluated in terms of qualitative and quantitative composition of the isolated essential oil. The highly reactive sulfur molecules of the garlic volatile fraction show variable response to the different isolation methods. The application of ultrasound for the extraction of the essential oil is considered to cause a lesser damage of thermal-sensitive molecules, thus, providing a better approach of the compounds primarily responsible for the characteristic odor and taste of freshly chopped garlic. All heat-involving isolation procedures have been shown to differentiate the volatile-fraction profile as analyzed by GC-MS. Especially when grouping the compounds into cyclic and acyclic, the percentage concentrations drop from 77.4% to 8.7% for the acyclic while that of the cyclic compounds increase from 4.7% to 70.8%. The observed fact may be attributed to the effect of the heat applied, which changes from harsh thermal treatment (SDE) to short time thermal (MWHD) and room-temperature isolation (USE). The use of USE proves to be crucial in order to provide reliable insight into garlic's chemistry.

Enhanced photocatalytic degradation of VOCs using Ln3+-TiO2 catalysts for indoor air purification.

Two types of lanthanide ion-doped titanium dioxide (Ln3+-TiO2) catalysts including La3+-TiO2 and Nd3+-TiO2 were prepared by a sol-gel method. The effects of the lanthanide ion doping on the crystal structure, surface area, adsorption properties, pore size distribution, and surface chemical state of the catalysts were investigated by means of XRD, BET, and XPS. As results, the crystal size decreased significantly, while the specific surface area, t-plot total surface area, micropore volume, and the total pore volume increased owing to the lanthanide ion doping. The nitrogen adsorption-desorption isotherms of the catalysts showed that the N2 adsorption ability of the Ln3+-TiO2 catalysts was better than the TiO2 catalyst. Among them, the 0.7% Ln3+-TiO2 catalysts demonstrated the highest adsorption ability. The photocatalytic activity of the catalysts was investigated in the experiments of the photocatalytic degradation of benzene, toluene, ethylbenzene and o-xylene (BTEX) in a gaseous phase. The photocatalytic efficiency of the TiO2 catalysts with the lanthanide ion doping was remarkably enhanced by BTEX removal. The 1.2% Ln3+-TiO2 catalysts achieved the highest photocatalytic activity. The enhanced photodegradation of BTEX is possibly due to the improved adsorption ability and the enhanced electron-hole pairs separation due to the presence of Ti3+ on the surface of Ln3+-TiO2 catalysts and the electron transfer between the conduction band/defect level and lanthanide crystal field state.

Depth distribution of irradiation-induced cross-linking in aromatic self-assembled monolayers.

Pristine and strongly irradiated self-assembled monolayers of [1,1':4',1' '-terphenyl]-4,4' '-dimethanethiol (TPDMT) on Au have been characterized by near-edge X-ray absorption fine structure spectroscopy using partial electron yield acquisition mode. The TPDMT films were found to be extremely stable toward electron irradiation, which is explained by cross-linking between the aromatic backbones. In addition, we assume that a large delocalization and a strong relaxation of the initial electronic excitations in the densely packed film contributed to the film stability. The data analysis implies an inhomogeneous distribution of the irradiation-induced dehydrogenation and cross-linking of the terphenyl moieties in the TPDMT film, being most pronounced close to the film-ambient interface. The inhomogeneity was explained by quenching of the electronically excited C-H states via dipole-dipole interaction with the states' image at the metal surface, which has a reduced probability with increasing separation from the metal surface. Generally, the results suggest the importance of relaxation processes for the response of self-assembled monolayers to ionizing radiation.

Synthesis and DNA damaging ability of enediyne model compounds possessing photo-triggering devices.

Enediyne model compounds possessing photo-triggering devices were developed. These enediynes afforded biradicals by UV irradiation and showed DNA cleaving activity. The DNA damage was confirmed to be mainly caused by the biradical, not singlet oxygen.

Solvent-free microwave extraction : an innovative tool for rapid extraction of essential oil from aromatic herbs and spices.

A relatively simple apparatus is described for extracting essential oils from aromatic plant material by atmospheric solvent-free microwave extraction (SFME) without the addition of any solvent or water. Isolation and concentration of volatile compounds were performed by a single stage. The product solutions of volatile compounds were directly analyzed by gas chromatography coupled to mass spectrometry (GC-MS). The essential oils fiom aromatic herbs (basil, crispate mint, thyme) and spices (ajowan, cumin, star anise) extracted by SFME for 30 minutes and I hour, were similar to those obtained by conventional hydro-distillation (HD)for (respectively) 4 and 8 hours. Substantially higher amounts of oxygenated compounds and lower amounts of monoterpenes hydrocarbons are present in the essential oils of the aromatic plants extracted by SFME in comparison with HD. Solvent-free microwave extraction is clearly advantageous to conventional distillation in terms of rapidity, efficiency, cleanliness, substantial saving of energy, and is environmentally friendly.